MM Storage location info REQ??

Hi
I need the field & the table name where the storage location of the receiving plant is stored.
In the STO/PO the storage location for sending plant & receiveing plant is entered.
Even for the GR for the Delivery No. the storage location is defined.
So i need the storage location fld name & respective table ,in which the data for the receiving plant is stored.
Plz tell me if any one hv the idea abt it.
Regds

hi
you not got my question.
I need to track frm the delivery no. or STO/PO.
In the table mentioned by you,all the storgae location against the respective plant is stroed.
I need one that location which is mentioned in the STO/PO.

Similar Messages

Movement type for blocking to a different storage location

Hi Gurus,
Is there any movement type by which the stock should move to blocked from unrestricted but to a different storage location. In the mvt type 344, the stock moves from unres to blocked but it is in the same location.
Regards,
Kumar

Hi Kumar,
344-Transfer posting blocked stock to unr.-use stock - reversal, is reversal of 343-Transfer posting blocked stock to unrestricted-use stock that TP Block to TP unrestricted.
Better use 343 for transfer posting from Block to Unrestricted.
If the reciveing storage location is not avliable while TP with 343 then goto OMJJ enter 343 movement enter , duble clikc on
Field selection (from 201)/Batch search procedure and then goto Details(Lens) and then in the Select group double click on "Transfer Postings" and then make receiving storage location as req/opt entry and save.
Then try do to TP for different storcge location for same plant with 343.

Goods receipt with mvt 103 and storage location

Dear All,
I have a requirement. I create a PO and make the GR with mvt 103. I have to use 103 because no accounting document shall be created at the time of goods receipt. Then i will approve it with mvt 105.
Now, my client wants to see the storage location info at the time of GR with 103. But i cannot enter storage location if i use 103. Is there another mvt type that i can use storage location but no accounting document created ? I mean i want to enter storage location when i use 103. is it possible or any other mvt types ?
Thanks in advance..
Best regards,

SAP docu explains:
To post all items of a purchase order into goods receipt blocked stock, proceed as described in the section Entering a Goods Receipt for a Purchase Order, but use movement type PO to blocked stock ( 103 ) instead of movement type PO to warehouse (101).
All of the order items are posted into goods receipt blocked stock with movement type 103.
Since the material is not to be added to the inventory yet, do not enter a storage location.
Apart from these differences, you can follow the procedure described in the section Enter Goods Receipt for Purchase Order.
regards,
Lalita

Purchase info record for PO determine by Storage location

Dear Guru,
Can you please advice when during the creation of PO, is there possible to determine the Purchase info record by the Purchasing Org, material, Vendor as well as "Storage Location".
Reason,
Sometime we need to raise the PO those customer who will be exempted from the governamt VAT or duty which the goods has to delivery to the country Bonded warehouse.
I created 2 Storage location;
1.) 1000 for general WH
2.) 2000 for Bonded Wh
So i would like to know if we can create 2 different info record determine by Storage Location?
Thank you very much,
Regards
Chee Wee

Hi
In Standard SAP it is not possible

IWAY Siebel Rx Adapter: Location info is missing for the req

Hi,
We are connecting to Siebel using IWAY siebel Adapter. The deployment of IWAY siebel adapter is successful.
We have configured receiver communication channel in PI to send request to siebel. The message fails in Adapter framewrok and the following message is displayed in Message Display too -> audit log.
Delivery of the message to the application using connection AFW failed, due to: IWAY AFJCA SAPXI cannot send the message: Location info is missing for the request.
Regards,
Siva

Dear Siva,
Check whether the all the required JAR files related to siebel in the library of the IWay installation.
This will help you to resolve
Check this link on the service marketplace for more information on available 3rd Party Adapters for XI:
https://websmp104.sap-ag.de/~sapidb/011000358700008673832004E/index.htm
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/34a1e590-0201-0010-2c82-9b6229cf4a41
Regards
Agasthuri Doss

Schedule lines are creating problem in PO-storage location in SAP

Hello Everyone,
We are using SRM 5.0 ECS.
We create the PO in SRM and send it to R/3 backbend system. When we maintain the schedule line in PO(SRM side),the backbend system is not maintaining the correct storage location from purchase req. And when we do not maintain the schedule line in PO(SRM side), the backbend system maintain the correct storage location from purchase req.
So here what can be the reason for this problem?
Regards,
Khushbu.

Please I need help on this.

Storage Location Naming Convention without WM!

Dear all
We are facing serious problem in our Storage Location for Raw Material.
We have 4 types of Raw Material Seating (S), Panel (P), Metal (M), Wood (W). And they are all stored under Storage Location: RWSL.
Requirement:
Although we have visual guideline as to which industrial rack will store the type of Material, it is insufficient. We need a more refined storage location down to which BIN of the rack we will put the Raw Material.
Due to limited time and resource, we cannot have WM implemented right now. Thus, we have come out with 2 alternative to overcome this problem:
Alternative 01:
We will use the Fixed Bin field in Storage Data 02 by putting the Bin number assigned to each Rack.
E.g. For Seating material code:SEAT01, we will maintain the Fixed Bin as R12A01/A02, it means this Seating material SEAT01 will be stored at Rack 12, fixed bin A01 or A02.
Question to Alternative 01: Will it cause problem in GR, GR, Transfer Posting and Stock Count?
Alternative 02:
Instead of going into details to put Fixed Bin field in Storage Data 2, we will abandan the existing Storage Location RMSL by introducing new format for Storage Location
Here is the example of Alternative 02:
For raw materials, we will use 4 digits location numbers, consistent with other Storage locations, the 4 digits storage location will start with u201CR _ _ _u201D to represent each location
And,
R _ _ _ is:
R = Raw materials
2nd digit = Division (S= Seating, P =Panel, W=Wood, M=Metal and W=Wood)
3rd digit = Rack Number (A, B, C, Du2026 and etc.)
4th digit = Rack Zone - each rack will broken down into zone, each rack can possibility have 2 to 3 zone. 1 Zone can be 1 colume of the Rack
An example of a possible location and its meaning will be
RSA1 = Raw materials warehouse, Seating division, Rack A, Zone 1
RPB3 = Raw materials warehouse, Panel Division, Rack B, Zone 3
The challenge of this is that instead of having 1 Raw Material Storage Location like RMSL, we will have a lot more storage locations each for division of Raw material due to the Rack Number we have as well as the Rack Zone.
Question to Alternative 02:
If we use this alternative, will it impact our future implementation of WM? From design wise, is it feasible?
Please advise what is the best approach and the feasible design on it.
Many thanks in advance.
Edited by: Daimos on May 13, 2009 10:15 AM

Hi, here is the Pro and Co of both approaches:
Method 01: Use existing SLOC and add the Storage Bin info
e.g. SLOC: STM1
         Storage Bin: RSC3, where RS = Rack Seating, C3 = column 3
Pro 01:
It will cause less effort as we only need to use LSMW for material master to add in the Storage Bin data for all material of SCM.
Pro 02:
I have tested out that in TCode MIGO, apart from SLOC, the pertaining Storage Bin data also appear. Based on my discuss with Xian Chen, sometimes they use MB1C(GR), MB1A(GI) rather than MIGO due to speed issue, I will need to check the field status if can have Storage Bin field APPEAR, if can, it will solve the problem
Con 01:
The Storage Bin information will only appear in MMBE (Stock Overview) but will not appear in the standard SAP Inventory Report (e.g. MB52 Warehouse Stock). To view it from SAP Inventory Report, we may need to customize the standard report to show the new field Storage Bin. It needs Abap effort.
Con 02:
We must have a very good naming convention for Storage Bin. And again, in the above example, if a material is put in SLOC STM1 at Storage Bin RA A1 or C4, it will set a very rigid rule in the future if we need to change it, as I fear that one the Storage Bin has been used up. It will not allow us to change (need to do testing to find out)
Con 03:
Do we have the time to define all the Storage Bin for each SLOC? Operation wise, the store personnel needs to design it
Method 02: Use the new SLOC
Pro 01:
RSA1 = Raw materials warehouse, Seating division, Rack A, Zone 1. More organized. Easy to tell the material is at which Rack and which Zone of the Rack.
Assumption:
01. we must not have too many rack for one Seating division and also not too many Zone for each
      Division, else it will cause confusion
02. 1 material should stick to 1 Rack 1 zone as much as possible, else later the PP consultant will
     have hard to to perform GI due to too many SLOC assigned to a material.
Pro 02:
In report wise, we are able to show the SLOC in inventory report. No need to enhance the existing inventory report as we do not use Storage Bin.
Con 01:
If there are too many SLOC creation due to it. It may cause problem for PP perform GI as too many selection available for a material. This can be avoided if stick to the General Rule that one material is tied with one SLOC.
Edited by: Daimos on May 16, 2009 5:07 AM

Stock Overview per plant wise/Storage location wise

hi
is there any transaction or report to get Stock overview plantwise/ storagelocationwise ... except MMBE it gives particular material.. i want per particular plant or storage location total materials stock.
I want stock report similar to MMBE it gives available stock per single material in a palnt but my requirement to print available stock per all materials in a given material along with storagelocation wise/batch wise and total quantity.
Points guaranteed..
Message was edited by: Ashok Parupalli
Message was edited by: Ashok Parupalli

There's quite a lot you can do in Logistics Info Systems to report on stocks across multiple materials.
Other than that, it depends on what you really want to show - stock that's physically present (e.g. including vendor-owned consignment), stock that you own (e.g. including customer consignment or toll manufacturers' stocks); do you want to show quantities (doesn't usually make much sense for more than one material, of course, due to varying units of measure) or values, etc.
Some of these data are quite expensive to read from a runtime perspective, in particular the "special" stocks (e.g. consignment).
You also have to consider that stock you own but that's not physically present on site (e.g. customer consignment), or GR blocked stock, usually is not assigned to a storage location.
If you give me some more info about what you're actually trying to achieve, I may be able to help you better.

Shipment costs and storage locations

Hello gurus,
I have got two questions concerning shipment costs:
1. In my POs I would like the system to automatically find a condition for shipment costs (e.g. 10$ per item or 100$ per PO), so that I do not have to enter them manually. Obviously the ammount should depend on the vendor, material etc. All I found up to now are condition types FRA1 and FRA2, but both of them are manual condition types. Isn't there any way of automatically determining shipment costs in POs?
2. One of our vendors does not charge any shipment costs, if the value of all items for one storage location exceeds 200$.
Example:
item   value    storage loc.
0010   10$      1000
0020 180$     1000
0030   20$      1000
0040   50$      1100
No shipment costs are charged for items 10-30, because the overall value of the three items is 210$, but for item 40 shipment costs are charged, because the item is for a different storage location.
Is there any way to generate this behavior in SAP?
Thanks in advance
Alicia

You can automatically enter the shipment cost based onthe vendor and material
1) you can enter them in the info record so it would be defualt in the PO. in this case you don't have to enter manually but this will be not check your PO item value
2) you can create the conditon in the m/06 as like freight conditon and create the access sequence based onthe combination you want e.g. vendor and material and enter this access sequence in conditon type oyu have created and maintian that in your pricing so sytem will automatically determine the moment you create PO for this vendor and mateirla combination
but as per your secind scenarion where you have to do the total and than determine that the shipment charge is applicable or not
this will required custom logic to populate the conditon based onthe calculation of the item level total.
use the user exit MM06E005

Automatic Inbound Delivery Creation in HU Managed Storage Location

Dear all...
I have created PO, packing instruction, and packing instruction determination.
Storage location was set to HU managed already.
Now I want do GR for PO (with MIGO transaction) which can create inbound delivery automatically, and also do the packing process.
Which config/setting should I do?
Thanks before.

HI,
In IMG-Logistics general-HUM-Basics-MM-IM-HU req for SL and default values for deliveries
Select the plant and click Sto Loc there u can find HU ReQ, Check that HU Req Box.
If you set this indicator for a storage location, the system does not create a material document when it carries out a posting, but creates a delivery via Shipping
Regards
Kk

Precising storage location in MB1B

Hi. I have a problem with movement type '303'. There is no possibility in our MB1B to precise which storage location we would like to move our matnr to?
http://www.woiz.polsl.pl/eklfeniks/test/
That's a screen from my MB1B. In case of movement type '301' in place of red 'circle' there is a field 'Storage location'. How to achieve that effect in '303' movement type? Where to set that property? I'd be very thankful for useful info. Greetings. P.

Hi,
As per ur screen shot u have entered 2nd screen.
In that place u have to maintain receiving plant not sto loc.
below the item details are the supplying plant details.
So in ur case instead of receiving plant system displaying receiving site.
Path: Tcode: OMBW. select ur mvt type.go to details.double click on transfer postings. see the receiving plant description.
U tel to ur abaper to change the description as mention in above field.
This wil solve ur problem.
Reward if useful
Regards
Viru

What are the list of .stock by storage location

hi, iwant to devlop the report to stock by storage location.give me description about a report to list of .stock by storage location. what are the functional spects for this report, what are the tables and fields we have to used for this report plz give me sample report.

Dear Radha Krishna,
You can either use program RMMMBESTN (from SE38) or TCode MMBE. However, you can copy the above program into a 'Z' program and change the logic if your requirement is not served by the standard report or you want to enhance the same.
Go through standard Reports:
MMBE Stock Overview
MB52 List of Warehouse Stocks on Hand
MB53 Display Plant Stock Availability
MB54 Consignment Stocks
MB5B Stocks for Posting Date
MB5K Stock Consistency Check
MB5L List of Stock Values: Balances
MB5T Stock in transit CC
MB5W List of Stock Values
MBBS Display valuated special stock
MBLB Stocks at Subcontractor
MBSF Release Blocked Stock via Mat. Doc.
MBW1 Special stocks via WWW
MC.1 INVCO: Plant Anal. Selection: Stock
MC.5 INVCO: SLoc Anal. Selection, Stock
MC.9 INVCO: Material Anal.Selection,Stock
MC.D INVCO: MRP Cntrllr.Anal.Sel. Stock
MC.H INVCO: Business Area Anal.Sel. Stock
MC.L INVCO: Mat.Group Analysis Sel. Stock
MC.P INVCO: Division Analysis Sel. Stock
MC.T INVCO: Mat.Type Anal.Selection Stock
MC48 INVCO: Anal. of Current Stock Values
MC49 INVCO: Mean Stock Values
MC50 INVCO: Analysis of Dead Stock
MC8M Read Opening Stocks
MCB) INVCO: Long-Term Stock Selection
MCC4 Set Up INVCO Info Structs.from Stock
MCH: RIS: STRPS/Mvmts + Stock - Selection
MCKJ Selection version tree: Stock
MCKR User-spec. sel. vers. tree: Stock
MCNB BW: Initialize Stock Balances
MCSK Call Standard Analyses of Stocks
MD04 Display Stock/Requirements Situation
ME27 Create Stock Transport Order
ME2O SC Stock Monitoring (Vendor)
MF65 Stock Transfer for Reservation
MI35 Batch Input: Post Zero Stock Balance
MIQ1 Batch Input: PhInvDoc. Project Stock
MM73 Special Stocks: Preparation
MM74 Archive Special Stocks
MM75 Display Archive of Special Stocks
MMBE_OLD Stock Overview
MMN1 Create Non-Stock Material &
MS04 Planning Scenario: Stock/Reqmts List
MS29 Calculate Sim. Initial Stock
Tables:
MKPF Header: Material Document
MSEG Document Segment: Material
IKPF Header: Physical Inventory Document
ISEG Physical Inventory Document Items
SBSE Stock Mngmt Levels for Inventory Sampling
SKPF Header Data: Inventory Sampling
SLGH Elements of Stock Population
SSCH Strata of Inventory Sampling
T156 Movement Type
MSKA Sales Order Stock
MSKAH Sales Order Stock: History
MSKU Special Stocks with Customer
MSKUH Special Stocks at Customer: History
MSLB Special Stocks with Vendor
MSLBH Special Stocks at Vendor: History
MSPR Project Stock
MSPRH Project Stock: History
MSSAH Total Sales Order Stocks: History
MSSL Total Special Stocks with Vendor
MSSQ Project Stock Total
MSSQH Total Project Stocks: History
http://goldenink.com/abap/files_in_sap.html
http://www.erpgenie.com/abap/tables.htm
Regards,
Naveen.

PO number not displaying for STO PO between storage locations in VL10B

Hi Experts
I have created a STO PO for stock transfer between 2 storage locations.
The PO has been created correctly - along with the "Shipping" details aptly.
However, when I execute VL10B along with the PO, the output screen doesn't show the PO created.
I have checked various discussions and verified the same. However, I am unable to create the outbound delivery for the PO.
Please help me on this.
Best Regards
Sudhi

Remove everything from the selection screen (including shipping point and delv. date). Just put the PO in the Purchase Order tab. Check all the other tabs, material, user role etc for extraneous/incorrect info.
Does the PO appear then?

Storage location issue in case of BOM

Hi All,
I have a issue related to storage location determination. There are three materials X,Y and Z. Material X is main item and Y, Z are components of X. While creating sales order when we enter X it explodes BOM. Now in customizing for material X and Z storage location has been determined as SL1 but for material Y SL2 is determined. When we create delivery system automatically proposes storage location for all materials as-
Material X- SL1
Material Y- SL1
Material Z- SL1
For material X and Z it should be SL1 (which is coming right) but for Material Y it should be SL2 (but its coming as SL1 automatically)
I've checked every area right from the combination of plant, shipping point and storage condition (storage condition is different in case of Material Y). There are also no stock determination rules defined in item category and material master. SL req. and determine SL is marked for item category of each line item.
Please help me with this issue

Hi,
The system proceeds during BOM explosion to determine the issue storage locations follows:
In oppr
If you set indicator 1 Only components, the system checks to see whether the issue storage location has been maintained in the material master record of the components and uses this storage location. This storage location is then used as the withdrawal storage location and is displayed in the component list of the planned order.
If you set indicator 2 Only assembly, the system checks to see whether the proposal withdrawal location has been maintained in the production version of the assembly or finished product. If this has been maintained, the system uses this withdrawal storage location for all components and displays it in the components list in the planned order. If no proposal withdrawal location has been maintained, the system uses the assemblys receiving storage location as the withdrawal storage location for the components.
If you set indicator 3, the system first proceeds as for indicator 1 described above. If it cannot find a storage location using indicator 1, it then proceeds as described above for indicator 2.
If you set indicator 4, the system first proceeds as for indicator 2 described above. If it cannot find a storage location using indicator 2, it then proceeds as described above for indicator 1.

Data for Storage Location of Material Doc. stored in table QAMB

Hi,
I am developing a report in which i have to fetch data on the basis of inspection lot and i want to have the STORAGE LOCATION data for inspection present in the QAMB table(QM: Link Between Inspection Lot and Material Document).
I am not able acess the data which stores info. about the storage location about it.I had tried to reterive the data for it through MSEG table but it is having large amount of data in it as i will not retirive through it and i am able to acess the desierd data through QAMB.
Is there any way to reterive the data for the storage location..

Hi Sanku,
I had checked the table T001L you had mentioned but it does not have any link with the table QAMBor material present in the material document... The storage location present in QALS is when the material is for the Mvt Type 101 but when it is move to *unrestricted(321 Mvt.Type) *it goes to some other specified location.. that storage location i am looking for ...
I hope you will guide me out for it...
Edited by: nav009 on Nov 17, 2009 11:39 AM
Edited by: nav009 on Nov 17, 2009 11:41 AM

MM Storage location info REQ??

Similar Messages

Maybe you are looking for