MM SUS Issues

Hello Friends,
We are implementing MM-SUS functionality and facing some issues. Could be very generic for those who have already worked on it so would need your help to fix these.
1. Once the PO is created and submitted to Supplier , he is able to send POR for quantity greater than the PO quantity. Although we have configured message control as error for object type POR but still the system is allowing the supplier to post the POR with quantity greater than PO.
2. We are not able to trigger the changed PO to SUS. We are changing the PO and saving it but a changed IDOC is not triggered ( may be some config is missing or we are not able to figure it out).
3. Same tolerance check issue is with ASN as well where supplier is allowed to create it with quantity greater than PO. I checked and found a note on this 1960743 which says that system would issue a warning in that case , which is happening but although i have changed the message to error still it is issuing warning and allowing the user to post the document.
4. Has anyone implemented an attachment function for documents ASN and INVOICE ( as this is not available in MM-SUS as compared to SRM-SUS).
Regards

Hi Sushant,
I don't see any tolerance maintained for SUS documents specifically. Tolerance check is there only for the normal PO , GR and Invoice but nothing specifically for SUS documents.
I have checked in SPRO and couldn't locate any place to maintain.
Let me know how this can be acheived.
Regards
Ushir

Similar Messages

WGM and SUS issues/questions

Hi all
I have set up a server that is currently running DNS, OD, AFP and SUS. I have a bunch of users set up in WGM but only one (the testing one) bound.
Firstly my bound account "STEVE" has - A user account in WGM which is also in a Group account in WGM. I assume as the computer has been bound (or binded!) to the OD this is why the computer has an Hardware UUID account in WGM this also resides in a computer group called All Computers.
Now Preferences in WGM only works if edited in the computer panel of WGM (with the UUID in) I can for example move my dock. How ever if I have no preferences (WGM) set of the computer and try to move the dock under Computer Groups (WGM) of which the computer is a member, then the dock don't move. It also won't move if I set (WGM) Prefs in users or user groups only.
This not a major issue as we only have 15 clients but setting pref for User groups or Computer groups would be better.
The main issue is SUS the SUS server is running on the server and has downloaded loads of updates. I can set the update server for the client (again only in computers in WGM) with the following server to use:
http://server.mydomain.com:8088/index-leopard-snowleopard.merged-1.suscatalog
Again setting in Computer groups would be better. However when I run software update on the client I get the following:
The Software Update Server (server.mydomain.com) is not responding.
Check to make sure your network connection is operating normally. If there are no issues with your connection, contact your network administrator for assistance.
It gives you the option to run network diagnostics which say everything is fine.
Any ideas
SUS is one of the things I'd really love to get going as our internet connection is quite slow.
Cheers
Steve

Hi all
I have set up a server that is currently running DNS, OD, AFP and SUS. I have a bunch of users set up in WGM but only one (the testing one) bound.
Firstly my bound account "STEVE" has - A user account in WGM which is also in a Group account in WGM. I assume as the computer has been bound (or binded!) to the OD this is why the computer has an Hardware UUID account in WGM this also resides in a computer group called All Computers.
Now Preferences in WGM only works if edited in the computer panel of WGM (with the UUID in) I can for example move my dock. How ever if I have no preferences (WGM) set of the computer and try to move the dock under Computer Groups (WGM) of which the computer is a member, then the dock don't move. It also won't move if I set (WGM) Prefs in users or user groups only.
This not a major issue as we only have 15 clients but setting pref for User groups or Computer groups would be better.
The main issue is SUS the SUS server is running on the server and has downloaded loads of updates. I can set the update server for the client (again only in computers in WGM) with the following server to use:
http://server.mydomain.com:8088/index-leopard-snowleopard.merged-1.suscatalog
Again setting in Computer groups would be better. However when I run software update on the client I get the following:
The Software Update Server (server.mydomain.com) is not responding.
Check to make sure your network connection is operating normally. If there are no issues with your connection, contact your network administrator for assistance.
It gives you the option to run network diagnostics which say everything is fine.
Any ideas
SUS is one of the things I'd really love to get going as our internet connection is quite slow.
Cheers
Steve

SUS issues

Hi there, I have a 10.6.7 xserve server which is set as a Software Update Server.
My settings are that all updates will be downloaded, and none of them are automatically enabled, I do that by hand.
The last months, in 10.6.6 and now 10.6.7 server, the random downloads are not copied, but are marked with an exclamation mark !
Those I can't enable.
In the log i can see for example: Ingnored invalid download request for product 041-0264.
I tried to restart the server, stop and start the update service, copy again, and sometimes the exclamation marks dissapear and the clients can see them, but other updates are still not correct..
For now it is: the iphoto 9.1.2 update.
Anyone who had this problem before? Or knows an answer?

In your post, you have this file misnamed:
index-leopard-snowleopard-merged-1.sucatalog
It should read:
index-leopard-snowleopard.merged-1.sucatalog
Note the "." between snowleopard and the word merged. You show a "-". This is incorrect.
Hope this helps.

Using wireless with JDS

I am trying to use the DLink DWL-650+ with JDS. Any ideas how to get it or any cheapo wireless card from BestBuy to work with JDS?! ! ! ! !
I know it's more of a SuSE issue, but I thought since this is an "alternative" to Windows, I would have more available for me to leave Windows. Now I have to use my Windows to get on the net, and then download RPMs for JDS. Truth is I tend to stay Windows and not deal with the shutdowns/restarts.
So help me leave Windows and get my DLink to work !

Manufacturers often change chipsets between versions of the same model. This is the case with DLink. Older DWL-650 cards used Prism, recent DWL-650 cards use ADMTek.
You'll have to install the JDS development packages and download the ADMtek driver from here:
http://www.admtek.com.tw/index/index/download.htm
The ADMTEK's 8211 driver source listed on their website is: http://www.admtek.com.tw/download/nic/adm8211/ADM8211_src_105.tar.gz
Their existing linux driver has a bug which prevents WEP encryption from working correctly, but I understand that a fix is in progress.

MM-SUS Scenario - Issue in vendor replication

Hi Gurus,
We are implementing MM-SUS scenario on SRM 7.0 interacting with a system R/3 4.6C and NW PI 7.0.
Now we are workking on the vendor replication from R/3 by mean tx BD14. So we performed all neccesary configuration and functional steps on R/3 system and on SRM to be able to execute BD14
After execution we obtain messages about succesfully IDoc creation for vendor data transmission and we see in tx WE02 that everything was OK, current status=03 (data passed to port OK).
But when we login on SRM, we dont' found the correspondent business partner in tx. BP and neither his connection with central vendor group in tx PPOMV_BBP and user/password generation to be sended by automatic email to supplier.
Can anybody help me with this issue?.Thanks in advance.
Regards,
Horacio

Hi,
We have been investigated the issue and for some similar issues the procedure to
delete the entried in VENMAP table and after to do the replication again
have solved the issue.
The steps to delete the entry from VENMAP:
- Goto to transaction SE16
- Open 'VENMAP' table
- Type in the vendor number under 'VENDOR_NO' field, which you
   need to delete.
- Select the record and open in display mode (or just double
   click on the record)
- In the 'Table VENMAP Display' screen, on the transaction bar,
   type '/h' and press enter.
- Click on the screen and press enter.
- You will be in the debug mode. Change the 'code' value to 'DELE'.
- Press F8 and execute the program. Now you will find a 'Delete Entry'
   button.
- Click on the 'Delete Entry' button and remove the entry from VENMAP.
Once this is done, run BBPGETVD transaction and unset 'Address
Comparison to Identify Duplicates'.
We can do other test, Would it be possible to you enter the supplier
data to the BUT000 table manually for the currupted business Partener ?
Partner GUID, Partner can be taken from the VENMAP table.
Please test both procedure and update me if it solve the issue for
the Partner.
Please check the note 548862 FAQ: EBP user administration, topics 2
and 3 about how you can check all EBP users and about BUP_BUPA_DELETE.
We hope this information can help you.
Kind Regards,
Edel.

Xperia Z1 charging issues/ model number not listed in SUS

Hi there.
My Mothers Z1 (C6903) appears to be charging irregularly after being in for repairs for a broken screen. For example it will not charge when powered on, expect on occasion when plugged into computer, and has a 50/50 basis of charging when powered off and is quite slow at charging too, it is good that it charges when switched off, however this is not convienent for her.
I've read some previous threads and they recommended to use SUS to update the phone, however in SUS's list of phones, it does not include my model number: C6903, i wanted to ask the people here whether it would be safe to use another xperia Z1 model listed in SUS, and wether they have any thought on the issue.
Kindest Regards.
Quadrafox700.

Sorry for the late reply.
I took it to the shop in town, where the broken screen was fixed. When the man had a look at it and plugged it in, the phone started charging no problem what so ever. When switched on, it had no issue with charging either, i felt abit dumbfounded by this because it really was not charging over the weekend at all. I took it to the local 02 shop in town too, to get their advice and tried charging it there too. Without fail, it charged.
Over the week it's been charging no problem and seems to be functioning properly.
As much as this is good news, i'm still confused as to why it wouldn't charge over the weekend, but as soon as the guy at the shop tried, it worked.
Kindest Regards.
Quadrafox700.
Edit : Spelling.

Service Procurement PO Issue in MM-SUS Scenario (SRM 7.0)

Hi Gurus,
We are facing issue while creating the service purchase order in MM-SUS scenario.
Creating the PO in ECC with Account Category "K" and Item Category "D". (PO should transfer through XML as in XI config v hv used proxies for both ECC & SRM,when creating PO xml not generated in SXI_MONITOR. what is the config required in ECC to generate the XML)
What is the Process of service entry sheet.
Regards
Satish

Note 868192 - Consulting solution: MM-SRV-SUS service procurement
A service entry in SUS is transferred to the R/3 system or ERP system using an IDoc after you submit the entry screen. Service entry sheets are created there and they are then available for release. You can perform the service entry in a number of ways:
Service entry of planned services: you can confirm planned services in the service entry in SUS. An overdelivery may occur if quantities are still open.
Service entry using time recording: planned services, for which a time recording is useful, can be split up. Time recording by the hour or by the day is possible.
Service entry for limits: You can use the free-text entry of new items and also the OCI-enabled catalogs to implement limits.
verena.kahnert at sap dot com

User synchronization SUS-BW issue.

Hello Experts,
Your help is required for the following issue.
One of our clients is implementing SRM-SUS 7.02 and would like to synchronize users (and information regarding BP) to their BW system 7.3
Configuration so far is as follows: SPRO -> SAP SRM -> Supplier Self-Services -> Master Data -> Maintain systems for Synchronization of User Data.
Parameters:
System Name: BW DEV
FM BPID: RS_BW_BCT_SRM_SUS_USER_BPID
Role: <blank>
F Mod.: Create User: BAPI_USER_CREATE
F Mod.: Change User: BAPI_USER_CHANGE
F Mod.: Delete User: BAPI_USER_DELETE
"Roles in external system" have been mapped.
Now, when a user (vendor contact person) is created in SUS, it's SU01 user is created correctly in BW. No problems here.
However, when I check table SRM_USER_SUPBPID in BW system, there are ZERO entries.
I guess I am missing something here.
I checked BADI SMUM_USR_CREATE_POST, and implementation RSSBR_SMUM_CRM_SUS is Active.
Should an entry exist in table SMUM_BSAPP? If so, what should I type in "BSID" field.
Any light on this matter is greatly appreciated.
Regards,
Gilberto Gallardo

Did you ever get this resolved? having a similar issue

OAS Install Issues SUSE LINUX [ulimit]

Like many others I am having issues installing OAS onto my SUSE EE Linux Server. The problem is that I cannot modify the ulimit for the oracle user (the user to install the OAS under). I have followed the directions found on the oracle site for installing 10g. I have also done a lot of searching regarding this issue and none seem to work. I have redone the process using orarun with these directions (http://www.oracle.com/technology/tech/php/installtxt/10gr2_sles9.txt) And I have followed directions found (http://www.novell.com/support/search.do?cmd=displayKC&docType=kc&externalId=10096341&sliceId=&dialogID=6335233&stateId=0%200%206333704) regarding setting /etc/security/limits.conf, /etc/pam.d/login, and /etc/pam.d/xdm . Any help on this issue would be excellent!
The issue is that ulimit -n for oracle returns 1024 no matter what I do. And ulimit -n 6653 returns an error.

Ok its working now. Basically I didn't set "session required /etc/pam.d/pam_limits.so" in /etc/pam.d/xdm till late last night and I forgot to reboot the server. This morning when I was running ulimit -n 65536 to get the error msg it worked. So thanks for the quick response, but my problem is now solved.
Ryan

10g on SuSE 9.1 Pro issue

Hi everybody!
I am a newbie in this area (Oracle & Linux) and I need some help here...
I have succesfuly installed Oracle 10g on SuSE 9.1 Pro (kernel 2.6.4), following the step by step procedures as described by Oracle (oracle user account, dba and oinstall groups, kernel parameters, shell limits, environment variables for the oracle account...) BUT...after rebooting, any connection to the host, nomatter what port(5500,5560 etc), is refused...WHY?...There are no changes in the network configuration, the firewall service is off...
Could somebody give me an advice?
Thanks!

emctl start dbconsole
isqlplusctl start

Issue with Vendor BP in SUS

Hi All,
We are on SRM 4.0 with EBP _ SUS scanario.
We flagged one vendor as portal vendor. That vendor is transferred to SUS but without BP number created.
When we are assignhing contact persons using transciation USERS_GEN system is giving error as : Business partner is not maintained for this organisation ID. ( vendor )
Can anybody tell me how to resolve this. Do we have creat manually BP for this vendor and then assign contact person ?
Thanks,
Sachin
Edited by: sachin patil on Jul 8, 2009 12:23 PM

Hi,
As of standard, BP for vendor should be automatically created when you transfer vendor to SUS. Check in venmap table in sus, if you have a corresponding sus bp guid. Get the bp no. from table but000 using that guid. Also check ppomv_bbp if the vendor has been assigned in sus.
Try directly creating a user for vendor using txn-'create users' in SUS portal. You need sus_adminnistrator role for this activity.
Regards,
Sanjeev

Issue while installing oracle in suse linux 11

Hi all,
When i try to execute runinstaller from root its not allowing me to run.
I am trying to install oracle 10g.
./runInstaller -ignoreSysPrereqs
Starting Oracle Universal Installer...
Checking installer requirements...
Checking operating system version: must be redhat-3, SuSE-9, redhat-4, UnitedLinux-1.0, asianux-1 or asianux-2
Failed <<<<
>>> Ignoring required pre-requisite failures. Continuing...
Preparing to launch Oracle Universal Installer from /tmp/OraInstall2011-10-03_07-00-51AM. Please wait ...
The user is root. Oracle Universal Installer cannot continue installation if the user is root.
: No such file or directory
Is there some thing we can do to bypass and install with root.Thanks.

Ambarish annapureddy wrote:
>
> Is there some thing we can do to bypass and install with root.Thanks.
No, please install using orasid.
Thanks

OBIEE 10.1.3.4 access issues on Open SUSE Linux

Hey guys,
I am new to OBI EE and i am trying to get this working on open SUSE platform. I got lucky and finished installation and ran the following scripts
# run-sa.sh start
# run-saw.sh start
# run-sch.sh start
The first 2 scripts went fine but I had problems fixing the Scheduler services. It gives the following error:
[nQSError: 67042] The Scheduler Configuration is incorrect.
[nQSError: 67004] Registry value for SchedulerScriptPath not set.
I am not sure what to do. I am also unable to access the Presentation(Dashboards) page. What do I do to access the OBI login page. Any suggestions are extremely appreciated.
Thanks

I am also unable to access the Presentation(Dashboards) page. What do I do to access the OBI login page. Any suggestions are extremely appreciated.Have started your OC4J instance? By default OBIEE installs a OC4J instance where the Analytics.war Web App will run. This is the Presentation Services plug-in that you use to access the BI Server via the Web (Answers, Dashboards, etc), so that's the login page you are looking for. On a default installation that OC4J instance runs on port 9704, so you could try going to http://your_server_name:9704/analytics to see if you can see the login page.

SRM-XI-SUS Integration issue.

hi
Anyone help me in SRM-XI-SUS Integration.
My Requirement is
1)       Purchase Order
2)       Confirmation
3)       Shipping Notification etc. from SRM to SUS Through XI.
Please it is urgent.
Thanks

Kalam,
Check this thread for various questions on this integration:
https://www.sdn.sap.com/irj/sdn/advancedsearch?query=srm-xi-sus%20&cat=sdn_all
---Satish

MM SUS Invoice unit price issue

Hello ,
We are using MM SUS invoice scenario. In MM PO has created for order quantity 2000 EA, and net price is 73.51 USD for 1000 per unit.
During invoice, price information of item is like this:
Price 0.07 USD, Per 1 EA and value is 147.02 USD
But during invoice processing, system calculated net value to 140 USD, and invoice posted for 140 USD only, any advice or suggestion how to handle this in?
System is SRM4.0 and ECC 6.0
Thanks in advances for replay.
Sunil

Hi Virender,
Value in SXMB_MONI in SUS is correct.
<NetUnitPrice>
<Amount currencyCode="USD">73.51</Amount>
<BaseQuantity unitCode="MTK">1000</BaseQuantity>
</NetUnitPrice>
</Price>
but in BBAP_PD (table BBP_PDIGP) entry is :
PRICE                                  0,07
PRICE_UNIT                       1
PRICE_ORIGIN
VALUE                                  147,02
Normally it should PRICE 73.51 and PRICE_UNIT 1000 ,any guess we are in SRM4.0?
Thanks
Sunil

MM SUS Issues

Similar Messages

Maybe you are looking for