MM-SUS Scenario - BP Creation from MM with external number
Hi Gurus,
We are implementing MM-SUS scenario on landscape involving ECC 6.0 EHP5 and SRM 7.0 EHP1.
In connection with Vendor transfer from ECC to SUS, We want to achieve that ECC vendor and SUS business partner (BP) have the same number (I E: vendor 300000 in ECC has BP 300000 in SUS)
But in the tests we performed sending vendors executing on ECC tx BD14 (via PI system), SUS ever creates Business Partners with numbers from internal range in spite of we have available external number range.
Can anyone tell me if is possible or SUS is able in standard way, receive a vendor xml message and perform BP creation with the same number (XML field <PartnerID>) sended from ECC.
I appreciate any help of yours. Thanks in advance.
Regards,
Horacio Miranda
Than you very much again Nikhil.
Also SAP answered to us about this topic as how you did, and definetely is impossible manage in SUS same number for BPs as vendor number in ECC.
Regards,
Horacio Miranda
Similar Messages
-
Sd invoices posting with External number range
Hi,
i am a fico consultant and dont know the proceedure that how to post SD invoice thorugh Sales orders with external number range?
while posting it is giving error like use internal number range.how to over come this.help me
Thanks
PrathimaGood Afternoon Prathima.
Use tcode OBA7
Look for Doc type RV Billing Doc trn.
This doc is generally used for posting Billing doc to accounting.
Here you would find Number range as external.
Reason: As per standard, the Accounting doc number is similar to your the Billing account.So, that there would not be any difference in numbers of both, therefore for accounting doc - Billing doc trnsfer (RV) the number range is Internal number but the Billing doc type will havre internal number range.
And as you are FI consultant, I don't feel I need to explain why or purpose these numbers should be similar from accounting point of view.
Hope it solved your query. Kindly reward.
Take care. JP. -
Purchase Order (PO) Inbound with external number range
We need to create a interface for Purchase order Inbound.
The PO will be created in 3rd party system, and the information is sent thro IDoc(Orders05). How do we create a PO in SAP with the same PO number as in 3rd party system.
We have allowed PO with external number range.
I couldnt find a Segment or field where the PO number can be mapped in the IDOC.
Points will be offered for useful informations.
Thanks,
SivaramanHi Sivaraman,
could you tell me how you solved it. I have the
same problem and didn't find the solution yet.
Thanks a lot!
Horst -
Automatic PO creation from PR with no master data
Dear gurus,
Is it possible to run ME59- Auto PO creation from approved PR with no master data/source assigned/PIR? Assuming user create adhoc PR.
Is it possible to run this process successfully if i didn't meet on the criteria below? let say no.1 is not checked?
1.Material Master purchasing view, check automatic PO check box.
2. Vendor Master purchasing view, check automatic PO check box.
3. Maintain Source list for Vendor and Material (transaction ME01) and also see validity period.
4. Maintain Purchase Info Record (transaction ME11), check info record category (must be standard or pipeline or subcontracting)
5. Create a Purchase Requisition ( transaction ME51N), during creation select check box of Source Determination.
6. Use transaction ME59 and execute for purchase requisition for vendor, you will be able to create automatic PO.
Thanks in advance.Hi,
yes all point should be checked
check following link
[http://www.sap-img.com/materials/steps-to-create-auto-po.htm]
Regards
Kailas Ugale -
Creation of HU in auto mode with external number range
Dear Experts,
I'm stucking in a scenario related to HUM
There are two handling units -
1. Bag
2. Pallet
through T code HU02 , it's possible to create an HU and assign it internal generated number.
But as per our requirement , we want to assign the external number to the HU (which is barcode number of bag or pallet)
Can you pls let me know the process of assigning External number range to HU.
Also we want to create the HU automatically after GR in production (MIGO,101) , instead of manually via HU02.
Pls explin the process of creation of HU automatically also...
Thanks in advance..Check with FM BAPI_HU_PACK.For packing an item into HU.
For external number range you need configure external number range
SPRO>Logistics - General>Handling Unit Management>Basics>Technical Basics-->Define Number Ranges for Handling Units.
After GR for production you need to confighre internal number range for perticular packing material type then system will automatically pack and place in HU location.
Please find some FM info
=========================
HU_BASIC_BAPIS Basic BAPIs for HUs
BAPI_HU_CHANGE_HEADER Change Handling Unit Header Data
BAPI_HU_CREATE Create Handling Unit with Items
BAPI_HU_DELETE BAPI for Deleting Handling Units
BAPI_HU_DISPLAY_HISTORY Displays HU History
BAPI_HU_GETLIST Read Handling Units from the Database
BAPI_HU_GET_LIST_MSG Select Handling Unit Output
BAPI_HU_PACK BAPI for Packing an Item into an HU
BAPI_HU_PROCESS_MSG HU Output Processing
BAPI_HU_PROCESS_MSG_DIRECT Select and Process Handling-Unit Outputs
BAPI_HU_REPACK Repack HUs and HU Items
BAPI_HU_UNPACK BAPI for Unpacking an Item from an HU
BOR_HU_DISPLAY Display an HU in Dialog Mode
=================================== -
Horrible Noise from PB17 with external units drawing power from FW.
With external boxes that draw power from the firewire bus (Audio interfaces/SSL Duende etc.),
my powerbook makes a terrible sort of digital whine.
(actually it sounds a bit like cassette based program loading on old 8-bit computers (e.g. ZX Spectrum)).
The noise is coming from under the rear left of the keyboard.
I'm convinced it's something to do with power draw as it only happens with boxes that take their power from FW.
Sorry if this is a repeat question. I did a really long search, but only got a couple of allusions to this.
Thanks again in advance for any help.
Grüß aus Berlin
Brutze
g5 dual2.3 /Powerbook 17" g4 Mac OS X (10.4.8)there is a fan under rear left of the keyboard - maybe fan is worn out and makes noise when spinning at higher speed.
-
Need to generate PDF file from OAF with "n" number of fields
Hi All,
I have a requirement in OAF to generate PDF file with n number of fields in PDF output. PDF output could have some times 2 fields or 3 fields or 7 fields too in some condition and it will be based on one parameter. This output will be looks like below given scenarios:
Example Scenario I
Emp No | Emp Name | Dept No | Job |
11 | Abc | 10 | MGR |
Example Scenario II
Emp No | Emp Name |
11 | Abc |
Please let me know if any one know how to go about it.
Thanks in advance,
Arvin
Edited by: user636850 on Jan 26, 2011 6:11 AMHi All,
I have a requirement in OAF to generate PDF file with n number of fields in PDF output. PDF output could have some times 2 fields or 3 fields or 7 fields too in some condition and it will be based on one parameter. This output will be looks like below given scenarios:
Example Scenario I
Emp No | Emp Name | Dept No | Job |
11 | Abc | 10 | MGR |
Example Scenario II
Emp No | Emp Name |
11 | Abc |
Please let me know if any one know how to go about it.
Thanks in advance,
Arvin
Edited by: user636850 on Jan 26, 2011 6:11 AM -
The system says my serial number is invalid while I just bought it and received a mail from Adobe with exact this number?????
Downloads available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 13 |12 | 11, 10 | 9, 8, 7
Photoshop Elements: 13 |12 | 11, 10 | 9,8,7
Lightroom: 5.7| 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.window using the Lightroom 3 link to see those 'Important Instructions'. -
My family account has 3 phones, phone 1 does not have an upgrade available but phone 2 does.
Can I order an iphone 5s from apples website with the number for phone 2 to get the upgrade price and then when I receive the phone activate it with phone 1's number?
I asked a Verizon representative and he says I AM ABLE to do this BUT I have been looking at "activation" videos and none of them shows any area where you enter a number to activate the phone which leads me to believe the number for the phone is predetermined. (I have never owned an iphone).
I would love a definitive answer from someone.PhilC506 wrote:
Can I order an iphone 5s from apples website with the number for phone 2 to get the upgrade price and then when I receive the phone activate it with phone 1's number?
Yes, you can do this. When the phone comes in, you'll need to activate it on line 2 to accept the Terms and Conditions, then you can move the phone to line 1. You then would reactivate the old phone back on line 2. Keep in mind that you may have a day's worth of pro-rated data on line 2 (I'd check via MyVerizon to double-check that the data plan did, indeed, drop off when you reactivated the basic phone). Also keep in mind that now line 2 has a new two-year contract and if for some reason you decide to cancel the line before the contract period is over, the ETF will be based on the smartphone purchased, not on the basic phone that's on the line. Insurance may or may not transfer (I've read that it will since both phones are on the same account, but I'm not positive about that). -
No new version from Open With External Editor?
Is there a way to not create a new version every time I use "Open with External Editor"?
If I want to open an image in PS, just opening it creates a new version in Aperture, even if I don't make any adjustments to the image in PS.
I've deselected "Create new versions when making adjustments" in the preferences.
Thanks for anyone's insight!Not sure this will help, but I noticed this problem as well a while ago, but have since developed a work around...
All my files start off as RAW. When I use "Open in External Editor", Aperture generates a new version with a bulls eye target (this is my C2 version). If manipulate this image in CS and save it when I close, it remains as a bullseye target (look at the lower right corner in full screen). If I reopen this specific image, no new file will be generated. If I manipulate it in Aperture, a new file will be generated (but without the bullseye target) and if I then use "Open in External Editor" another new file will be generated.
I have never checked to see what happens with a primary PSD file imported. And I am sure the meaning the bullseye target is in the manual someplace.
So my workflow is RAW file-->all my desired aperture adjustments-->open in external editor for final clean up and modification. I end up with my original RAW file (Aperture modified and restorable to original by removing all selections) and one CS2 file. If I want several version off of my first CS2 file, I duplicate version of the CS2 file, and the open the bullseyed version NOT the new duplicate version image.
Hope this helps...i know is seems wierd, but it works
steven -
Serial number with external number range.
Dear all
pl how to configure the logice for serial number like gbrx123xeao120001here gbr is prefix code which is fixed x is model sufix,e is yaer of mfg 0001 is serialnumber. so now tell me how to generate the aboce said serial number when production order creation.
pl tell me all config and related settings .
thanks and regards
BaswarajHi ,
Please mainatain the external number range for serial number management as
from 01 to 999999999....... and AAAA.....to ZZZZZZZZ.....
While doing goods movment you can use user exit to define serial number as per the customized calculations .
Also you can create seperate Zprogram for goods movement there u can calculate for Serial number and pass it to goods movement BAPI as per your requirement .
Hope this information helpful .
Best regards ,
Chithaanantham -
Change from Internal to External Number range for customer account group
Hi,
We would like to change the number range assignment for a customer account group from internal to external. The external number range assignment check box is greyed out as a few numbers in the range have already been used up. We want to do the internal to external assignemnt change, create a customer of a specific number, and revert the range back to internal assignment. Is this possible?
Appreciate your help.
RamHi,
Please do the below steps:-
(1) Go to XDN1 and click on "Maintain status" button. Note down the current status and change the status to zero. Save.
(2) Again go to SDN1 and click on "Maintain No. Range" button, and change the no. range to external. Save. (if that number range is maintained for multiple years, then make it external for the first yer and for the subsequent years, it will become automatically.)
(3) Then create your customer with specific number.
(4) Then go to XDN1 and click on "Maintain No. Range" button, and change the no. range to internal. Save. (if that number range is maintained for multiple years, then make it internal for the first yer and for the subsequent years, it will become automatically.)
(5) Again go to XDN1 and click on "Maintain status" button. Maintain the current status as the number noted down in step (1) above. Save. (In case number created in step (4) is greater than the number notes in step (1), maintain the number of step (4) in current status.)
Regards,
Gaurav -
How to replace TLB order in APO (/sapapo/snptlb) with external number
Hi All,
I am trying to replace TLB order (ex. APO-0001) created in transaction /sapapo/snptlb with an external number generated by me
(ex. test-123). Can anyone suggest an FM or anymethod or process for the same.
Win full points by answering this simple question !!
Thanks - ChandanDear Chandan
You can make the settings in SPRO->APO->SNP->Basic setting-> Maintain Number Ranges for orders . Maintain the number ranage and Tick it as External.
When you Run TLB, You can provide the external number. -
Root org. unit with External number range
Hi all,
I have a unique requirement.
We need to create a root org. unit. I used PP0CE to do the same. But it would generate org. unit numbers internally i.e. system generated.
We would like to assign an external number range to the root org. unit created.
In case I try to create it using PP01, we have to provide a relationship to other org. unit while creating root org. unit in PP01.
It would be great if someone can tell me the solution for this issue.
Regards,
BharatHi Bharat,
You can maintain number range even for org units, as follows:
Here
01 - plan version
A, C, O, P etc are object types
after selecting the respective ie 01O IN Ex ,
now click on maintain number range where you can clearly specify the number range either internal or external.
Then u can start with TC PPOCE
Thanks
Sai -
Post depreciation with external number range assignement
HI
When i am running Depreciation run AFAB, i am getting error"created doucment number range with internal assignement.
Currently the number range assigned for documents is external.
Why this error is coming... please provide solution without changing number range to internal..
Thanks and regards
Ramarao.pHI
see the SAP document .....
Specify Document Type for Posting of Depreciation
In this processing step you determine the document type for each company code for posting depreciation.
Standard settings
SAP supplies document type AF for depreciation posting.
Requirements
You must have defined the document number ranges.
Activities
1. Check the standard document type AF. If needed, define your own document type.
2. Specify the document type for depreciation posting. The document type you select must meet the following conditions:
It must be a document type for batch input.
It must be defined with external document number assignment
So please provide the solution ...with out changing internal number range...
Thanks and regards
Ramarao.p
Maybe you are looking for
-
How can forbid changing data when using BAPI 'BAPI_MATERIAL_SAVEREPLICA'?
I am using BAPI 'BAPI_MATERIAL_SAVEREPLICA' to creat material master data in batch. But this BAPI also can be used for change mode. How to forbid the change of MAT data when use this BAPI? TKS a lot~~ I am looking foward to your response~~~
-
Hi Experts, I've come across some interesting behavior that I don't fully understand and cannot find any documentation on an hoping someone can shed some light in these dark corners of SAP B1. In the "Shipping Types - Setup" window (Administration->S
-
Enter Output Type Each Type while Printing Invoice
Dear All, Have searched in the forum already for a proper answer but could not find one. The issue is, while printing the invoice, the system is not automatically determining the output type even though all the output determination configurations hav
-
How to configure a 1131 set as WGB to auth via WPA2?
The guides I checked only describe: #1 - a 1231 using WEP and #2 only provides an example for WPA-PSK? I want to use an SSID configured on the WLC shown below. Is there a guide explaining the config for WPA2? thanks. Tom Security 802.11 Authenticati
-
Setting certain fiels to display only in Life and work events
Hello gurus, we are implementing life and work events and are requesting you to give some suggestions, if possible. We have a globl version of the life and work events and in the similar lines, there are life and work events for other countries l