MM-SUS Scenario---Error in R/3 IDOC when i change the Quantity in SUS

Hi All,
I have changed the PO quantity in SUS and then send the PO acknlowledgement to MM. I could see the idoc as error with the following message...
error message: Acknowledgment for PO item PO number 100 and item 00010 contains quantity variance.
Can any one suggest what needs to be done to rectify the above issue.
Thanks in advance...
Regards,
Jagan

Hi,
See these related threads:
Tolerance Check for Price Variance is not working
Re: Update PO data with those of POR by vendor from SUS
Re: Tolerance range
Re: Tolerance in SRM and ECC (BE R/3)
Also see these OSS notes:
496901 Tolerance check - back-end service PO with/without limit
835073 Enhancement of the tolerance checks
873172 Price variance: Check on percentage limits is inaccurate
1068470 SUS-MM: Processing of PO response for rejected items
1002607 IMS monitor: quantity variance exception - not able to post
BR,
Disha.
Pls reward points for useful answers.

Similar Messages

I found an error when I changed the contact information.

I found an error when I changed the contact information.
Yesterday, I imported all my contact information from my old phone to my brand new iPhone 4S at an AT&T store. Everything looked fine, but all the first names and the last names were switched. So, I had to correct all contact information manually again. It was so ridiculous.
When I corrected the contact information, the names on my contact list were not changed immediately. For example, when the name of a person, ‘Doe John’, was changed to ‘John Doe’, the name on the contact list was not changed and remained as ‘Doe John’. After I rebooted my iPhone, the name on the list was changed correctly. Do I have to reboot every time when I switched the first name and the last name?
My iPhone Information
IPhone 4S White 16G
Model: MC924LL
iOS Version: 5.0.1 (9A405)

Is ths display order for contacts set the way you want it?
Settings > Mail,Contacts,Calendars > Display Order

Error when I change the BOM without a change number

Hi,
I would like to receive an Error when I change the BOM without a change number.
I define the modification parameter (EC management active and History reqmnt), I configure history reqmnt for BOM (I choice the status 1 and 3 for my BOM usage 5)
In change the message type I dont have the really message number in the liste.
How can I create a new message (045) so that I get an error by changing the BOM without a change number.
Thanks

Dear Dede,
check for the Authorization Object C_STUE_NOH for the
particular User Id's for which you want to Create or Change a
BOM without a Change number.
So assign this Authorization Object under all user id's for which
you want to have this control.
Adding the mentioned Authorization Object in particular User
Id's will resolve the problem.
This can be done using PFCG T code by adding in particular
Roles.
Revert back incase of any clarifications.
Regards
Mangalraj.S

HT202159 I was downloading a app from the app store and it downloaded about 85% then gave an error message download failed but when I reopen the app store to the purchases the resume button show but when i click it the same error comes up failed to downlo

I was downloading a app from the app store and it downloaded about 85% then gave an error message download failed but when I reopen the app store to the purchases the resume button show but when i click it the same error comes up failed to download

If you have more than one user account, these instructions must be carried out as an administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Select
/var/log ▹ install.log
from the hierarchical list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar. Then select the messages from the last installation or update attempt, starting from the time when you initiated it. If you're not sure when that was, start over and note the time. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V).
If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.
When posting a log extract, be selective. Don't post more than is requested.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Edit it out by search-and-replace in a text editor before posting.

TS2446 Hello!After I've done my last softwere update I couldn't buy or get any free apps on the apps store.There was an error on my paymant method.I reintrodius my data for the credit card and again error for my credit card.I've changed the credit card an

Hello!After I've done my last softwere update I couldn't buy or get any free apps on the apps store.There was an error on my paymant method.I reintrodius my data for the credit card and again error for my credit card.I've changed the credit card and the same.why???????

I have tried all those things I even updated the software to the new iOS system and it still did fix my problem.
What happened is that my garage band looks like it will open then it shuts down.
I have lot of important things on my garage band and I'm afraid that if I uninstall it deleting it then reinstalling it all my work on it will be gone and I can't have that happen.
Everyday I am hoping that when i go to open the app that is will work but it doesn't it gets ready to turn on then it shuts off , the app doesn't even open all the way and turns off.
I really hope I don't have to erase it.
It'll say it's ,lading my songs then it shuts down .
If I waited for the App Store to come up with an update for garage band should I wait till then to update my app so it doesn't get damaged . I don't want to erase it and all my data get erased . I figured if I wait for an update then my garage band will reset itself but won't delete my data. I'm not sure if that will help. Is there anything you or anyone else might know that can help me with this matter ?
Thank you
Simachyahi

MM-SUS Scenario---Error while posting the PO in SUS System from R/3 system.

Hi All,
An error occurred within an XI interface: Exception occurred:BBP_PD:004 -Partner 0000003000 not found E:BBP_PD:147 -Enter a country for partner 0000003000 with type 'Sold-to Party' Programm: CX_BBP_BD_ERROR===============CP; Include: CX_BBP_BD_ERROR===============CM002; Line: 57
The above is problem occurred in SUS system. I have checked the message SXMb_MONI Tcode for XML message.
Can any one suggest what could be the problem and the solution for the same.
we are working on MM-SUS scenario (Plan Driven Procurement).
Thanks
Jagan

Hi
Please go through the links below ->
purchase order doesn't create in srm sus
purchase order not create in sus
Enter a country for partner with type 'Sold-to Party'
BBP_BUPA_SUPPLIER:101
Unable to determine logical system of sender
Help MM-SUS!
SUS-MM:PO not transferred to SUS--message:'sold to party'
Error in SUS PO creation
Re: PO error in SUS-MM Scenario
Cancellation from SUS hangs in XI interface
Regards
- Atul

R/3(MM) -XI- SUS Scenario Error

Hello,
I'm working on SRM Integration: R/3(MM) to SUS Scenario
Whenever i post a PO message to SUS from R/3 (MM module), I see the following error in SXMB_MONI:
ERROR:
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?> <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand=""><SAP:Category>Application</SAP:Category><SAP:Code area="ABAP">APPLICATION_ERROR</SAP:Code><SAP:P1/><SAP:P2/><SAP:P3/><SAP:P4/><SAP:AdditionalText/><SAP:ApplicationFaultMessage namespace="http://sap.com/xi/SRM/Basis/Global">StandardMessageFault</SAP:ApplicationFaultMessage><SAP:Stack>The application triggered an exception
</SAP:Stack><SAP:Retry>M</SAP:Retry></SAP:Error>
TRACE:
"An error occured within an XI interface: SLD system SNT_BS is not known Programm: SAPLBBP_BD_MAPPING_SAPXML1; Include: LBBP_BD_MAPPING_SAPXML1F1Y; Line:92 "
Can anyone help me resolve this problem ?
Thanks,
Regards,
Sridhar

Hi,
Thanks for the reply Vishnu. No i didn't create those OSS messages
I just now found the reason and resolved the problem.
Let me describe the reason for the problem:
In the SRM box, values for the "System Landscape Directory Names" (Business System Names) in the "Definition of backend systems in B2B" were not entered.
Txn : SPRO
SAP Reference IMG> Supplier Relationship Manager>Supplier Self Services>Technical Settings>Define Backend Systems.
Regards,
Sridhar

IDOC generation to change the Purchase Order

Hello Experts,
I am developing the program for changing the purchase order through IDOC.
We will get the file from legacy sytem with control and header and detail record.
So when ever the there is EOR as last field in the detail record. Im updating the IDOC_DATA and calling functin IDOC_INBOUND_SINGLE.
SO when ever there is mulitiple line items changes for single PO.
we will get the file like that for last detail record we will get EOR as last field for last line tiem .
So i m grouping in to one control and one header and one or more detail record and passing to the IDOC_DATA calling functin IDOC_INBOUND_SINGLE.
At this time i m getting error like that header segement is missing
Please help me to solve this issue. Any one worked on similar type of issue please help me.

Cannot see your program of course but check that you populated the header segements.
What does IDOC_INBOUND_SINGLE expect, does it expect a particular Idoc type? in that case you gotta build that first from your file.
Is IDOC_DATA all that this function requires, what are the other input parameters?
regards

How i need to write a logic to generate idoc for some of infotypes, when i change the single infotype

Hi experts,
I have an requirement , when I change any infotype record from pa30 or pa40, i.e
suppose I am changing the infotype 0002 in pa30 , the idoc only generated for that changed infotype only,
but I need it to generate the idoc for some other infotypes also I.e(0000,0002,t528t, 0016).
So please give me some help to generate idoc when I run a rbdmidoc(bd21).
Thanks in advance.
Venkat

yes, visible bounds is reading the non-visible masked objects too.
you're going to have to do it the hard way, loop through all your objects to get your bounds manually, and while you're at it, test for clipping masks and use the masking path instead.

Power Map has encountered an error and it needs to close, after changing the graphic settings

I've been using the updated Power Map tool successfully over the past few days.
Last night I was playing around with the graphics settings that can be found under the File Tab (I know that should teach me from playing around and following the user guide :-) ) and I changed the detail from Medium to High (I think) and now all that happens
when I click on create a new tour or select an existing tour is
"Power Map has encountered an error and it needs to close. Power Map can collection information about the error and create an e-mail which you will be able to send to Microsoft and help us fix the problem. Do you want to do this?"
The error that gets generated can be seen below.
Thank you for submitting this error information to Microsoft. We appreciate your help!
System.Exception: Could not create the render target shared resource.
   at Microsoft.Data.Visualization.Engine.Graphics.Internal.D3DImage11.SetBackBuffer11(IntPtr pResource)
   at Microsoft.Data.Visualization.Engine.Graphics.D3DImage11.SetBackBuffer(RenderTarget renderTarget)
   at Microsoft.Data.Visualization.VisualizationControls.GlobeViewModel.CompositionTarget_Rendering(Object sender, EventArgs e)
   at System.Windows.Media.MediaContext.RenderMessageHandlerCore(Object resizedCompositionTarget)
   at System.Windows.Media.MediaContext.AnimatedRenderMessageHandler(Object resizedCompositionTarget)
   at System.Windows.Threading.ExceptionWrapper.InternalRealCall(Delegate callback, Object args, Int32 numArgs)
   at MS.Internal.Threading.ExceptionFilterHelper.TryCatchWhen(Object source, Delegate method, Object args, Int32 numArgs, Delegate catchHandler)
I've removed Power Map from the system, restarted, repaired Office, restarted and reinstalled Power Map but the problem remains. So i'm guessing that the setting I changed are stored in the Registry or File System somewhere.
Any help would be gratefully received.
Regards
Rob Ireland

Is this still an issue?
This also might be worthy to send to the team as a bug.
You can send it in email using the Smile/Frown feature in the UI.
Thanks!
Ed Price, Power BI & SQL Server Customer Program Manager (Blog,
Small Basic,
Wiki Ninjas,
Wiki)
Answer an interesting question?
Create a wiki article about it!

Error when I change the visibility of a context node

Hi,
I had to change the visibility of a context node (ZActivityH) to public (it was private) in the context to access it in the method DO_HANDLE_EVENT. I used transaction BSP_WD_WORKBENCH. I verify and activate it.
As a result of changing the visibility, I have this error:
Class      CX_SY_REF_IS_INITIAL
Text:      Dereferencing of the NULL reference
Program:      ZL_CRM_IC_IRECREASON_IMPL=====CP
Include:      ZL_CRM_IC_IRECREASON_IMPL=====CM00C
Source Text Row:      8
The new source code in method DO_HANDLE_EVENT is:
DATA category TYPE STRING.
category = ztyped_context->ZActivityH->GET_CATEGORY( ATTRIBUTE_PATH = '' ).
Any idea about the problem? Can I modify the visibility of a context node?
Thank you very much for your help.
María José

Thanks a lot, Patrick,
My context node is null, but I don´t know why.
I have:
In Class: ZL_CRM_IC_IRECREASON_IMPL
Attribute ZTYPED_CONTEXT     type ref ZL_CRM_IC_IRECREASON_CTXT
In class: ZL_CRM_IC_IRECREASON_CTXT
Attribute ZACTIVITYH      type ref ZL_CRM_IC_IRECREASON_CN10
In class: ZL_CRM_IC_IRECREASON_CN10
Method GET_CATEGORY
In method CREATE_CONTEXT_NODES:
model = owner->create_model(
      class_name     = 'ZL_CRM_IC_IRECREASON_CN10'
      model_id       = 'ActivityH' ).                       "#EC NOTEXT
activityh ?= model.
In view Im filling the context node:
Regards,
María.

Error u2019Select a Payment Reasonu2019 when I approve the document in HRAS"

Hi
I get a error ,u2019 Select a Payment Reasonu2019 when I approve the document in HRAS .
This is coming from IT14. But we are not using this Payment Reason field in Infotype 14 anywhere.
We are in Release 604 and Support Pack 12.
Please advise.

Open the document with Open Office. Select and Copy the image. Paste it into Pages.
If that doesn't work,
Open the document with Open Office. Select and Copy the image. Launch Preview. Press command-N (New document from Clipboard). Save the Preview file as a PDF or JPEG, as appropriate. Insert that in Pages.
Regards,
Barry

How to trigger outbound IDOC when data changed in BP through Inbound IDOC.

Hi,
    In our system whenever we create a new Business Partner, these data is send across to SAP R/3 (as BDOC) and to Mainframe system (as outbound IDOC). Whenever we change any Business Partner record the data is send across to SAP R/3 (BDOC) and to Mainframe system (as outbound IDOC).
    This functionality is working fine.
    Currently we are getting a value for one standard field (Customer_Group3) of Business Partner as an inbound IDOC. The value of the inbound IDOC is reflecting in the field (Customer_Group3) in Business Partner Transaction. Once the inbound IDOC is received, the modified value is send across to SAP R/3 as BDOC. But the modified value is not send across to Mainframe system (outbound IDOC). The outbound IDOC is not getting triggered.
Kindly help

Is your mainframe system configured as Site in SMOEAC. If so are you using XIF Adapter.

Why is the error console is opening now when i start the browser. It has a series of entries in it.

The error console opens on top of the Browser window when I first open it and has a series of entries in it.

Do you have that problem when running in the Firefox SafeMode? ''A troubleshooting mode.'' 
You can open the Firefox 4.0 SafeMode by holding the '''Shft''' key when you use the Firefox desktop or Start menu shortcut. Or use the Help menu item, click on '''Restart with Add-ons Disabled...''' while Firefox is running. 
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before using the Firefox shortcut to open it again.''
If not, see this: 
http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes

Error on adding items to a IDoc document after changing the port

Hi friends,
We have a process that generates a set of IDOCs for a payment proposal to an external entity, that worked perfectly until we changed to a new port. Before, the aggregation of items was taken for each document. After the change all items are added to the first document only.
Steps:
ZPCSC03 - Generates the set of IDOCs
ZPCSC00 - handle the IDOC's created and generate a consolidated IDOC that sends to a EDI port.
No changes were made to the programs so I think it is a parameterization fault. Any idea what might be wrong?
I will appreciate your help.
IVentura

Below is the error we been getting...
Operation 'impersonate' of Web Service 'com.siebel.analytics.web/soap/v1.SAWSessionService' at port 'SAWSessionServiceSoap' failed with the following explaination: "Authentication error. An invalid User Name or Password was entered.".(SBL-EAI-04308)

MM-SUS Scenario---Error in R/3 IDOC when i change the Quantity in SUS

Similar Messages

Maybe you are looking for