MM01 Create New Material Master without Basic view

Hi,
The SAP system allow us to create a new material master Purchasing View only (without Basic views). We execute T-code MM01, select Purchasing view only, enter the purchasing view data and save. Material master created with only the Purchasing view.
We want to control whereby Basic view must be created first before any plant/organisation material views (Sales, purchasing, Accouting etc) can be created. That means user cannot create Purchasing view ONLY if the Basic views is not created, can this be done??
best regards,

Hi,
    For most of the standard SAP material types the basic data 1 view is configured as mandatory, but that can be turned off in the configuration. The first place I would look would be in SPRO under 'Logistics - General -> Material Master -> Basic Settings -> Material Types -> Define Attributes of material types'. In this transaction, highlight the material type being used and click on the magnifying glass. The section 'User departments' shows what views can be created for a material. You need to check 'Basic Data' is selected here.
If that isn't the problem, then I would suggest that you look at the screen sequence and also the field selection configuration for the material type, which you can find under 'Logistics - General -> Material Master -> Configuring the Material Master'. This configuration dictates what fields are shown on the material master and the status of each field, i.e. whether it is mandatory or not.

Similar Messages

  • Error when I create the New material Master (MM01) for New Plant.

    Dear experts,
    I got the error when I create the New material Master (MM01) for New Plant.
    Error:  Valuation Area 2800 Not yet productive with Material Ledger.
    So Pl send me the solution asap.
    Venkata Raju Khottari

    Hi,
    Have u assinged Plant to Company code?
    If u say no, use T.code OX18.
    Regards,
    Murali
    Assign points if it is useful.

  • Is it possible to Create Material Master without Profit Center ?

    Hai,
          1) Is it possible to Create Material Master without Profit Center ? 
          2) How SAP System Validate Profit Center in material master. ? is it material Type wise ?
          3) Whether PO Order Creation,GRN & MIRO Possible for those material Master without Profit Center.?
    Kindly Explain me clearly..
    Thanks & Regards,
    Swetha

    Hi,
    Profit center is at the plant level.
    You can create material master even with out a profit center.This field will be there in the costing view and and general sales/plant data.
    while creation of the materila master if do not select these views system will not ask for that.Normally it is pertaining to the costing analysis.
    A profit center manager is held accountable for both revenues, and costs (expenses), and therefore, profits. What this means in terms of managerial responsibilities is that the manager has to drive the sales revenue generating activities which leads to cash inflows and at the same time control the cost (cash outflows) causing activities. This makes the profit center management more challenging than cost centre management. Profit center management is equivalent to running an independent business because a profit center business unit or department is treated as a distinct entity enabling revenues and expenses to be determined and its profitability to be measured.
    Business organizations may be organized in terms of profit centers where the profit center's revenues and expenses are held separate from the main company's in order to determine their profitability. Usually different profit centers are separated for accounting purposes so that the management can follow how much profit each center makes and compare their relative efficiency and profit. Examples of typical profit centers are a store, a sales organization and a consulting organization whose profitability can be measured.
    For more info,please refer
    http://help.sap.com/erp2005_ehp_04/helpdata/EN/cc/36428094f311d2b47a006094b9b0a5/frameset.htm,
    Regards,

  • How can I know the new Material Master has been created?

    Does anyone have been tried about how to trigger the new Material Master has been created at a time interaval(maybe an hour or a day)?
    I want to transfer the new Material Master within a given period from SAP R/3 4.6C to .NET Application through standard BAPI or RFC and .NET Connector 2.0. How can I do?
    Any suggestion is wellcome. Thank You.

    Thank you Jiri Ehrlich for answering my question..
    I choose the third way as you suggest..
    ".. 3) Create your own ABAP function to export whole Material Master, call this function from your .NET application and do synchronizing on .NET side (so your .NET application will be RFC client).."
    I've tried RFC that retrieve Material Detail by using BAPI_MATERIAL_GETLIST. It works fine but if I want to retrive the new Material or modified within a given period of time(for example 15 or 30 minutes). How I can do? Is there any standard BAPI or RFC to call from .NET or I have to write new RFC.
    I have little background of ABAP so help me please. If I have to create new RFC, is there any ABAP Function to call or which table I can retrive those information.
    Anyone can suggest?? Thanks in advance

  • Error while creating a material master (mm01)

    hi,
    I'm getting this error message when I'm creating a material master in a specific plant/sloc. I'm probably guessing its in config. I really need some help here.
    "Tables TCURM and T001W inconsistent; notify your system administrator" .
    could any one  draw some light on this.
    thanks regards,
    chinta

    HI,
    Before creation of plant 1st check in t.code:OMSA and see your plant assigned to field reference.
    Check in t.code: OMSY, see your company code entry & active for material management.
    Also check your plant is active for your material type in t.code: OMS2 with quantity & value updating.
    ###Check assignment of plant to company code in t.code: OX18 and see activation of your valuation are in t.code: OX14
    Just cross check all material master customisation , refer link with t.codes:
    Re: Material Master
    Regards,
    Biju K

  • How to create a material master with referrence to exsisting material maste

    hi experts
    how to create the material master with reference to an existing material master ?
    please explain in steps
    regards
    jai

    Dear,
    It is very simple.
    Enter  MM01 t-code.
    Enter your existing material code in field of reference material code.
    If your material number range is external number range then enter number of material otherwise direct enter industry sector and material type.
    After enter basic detail system ask you plant/storage location detail and view detail.
    Select reference plant and storage location in left sight of diglog and enter plant and storage location in right sight of diglog screen for which you want to maintain material master.
    Then click on all view, If you want to change some detail change it.
    Due to reference material all detail is come from reference material.
    Then click on save.
    NOTE: - You can create new material with reference of old material but it is prerequest material type should be same of both material old and new.
    Regards,
    Mahesh Wagh

  • Creating new Material Group

    Hi SAP Gurus,
    How to Creating new Material Group?
    Regards,

    Hi,
    Go to OMSF and here click on "New Entries" button and maintain the Material Group and its Description and save.
    Config Path: - SPRO > Logistics - General > Material Master > Settings for Key Fields > Define Material Groups

  • Creating New Material Type

    Hi,
    While creating new material types what things should be taken in to consideration?
    If i want to create it by using copy function which ref. material type we should select and why?.e.g. ZSCRAP- Scrap Material

    Dear Ashutosh ,
    Grouping of Material that have same basic  properties  can be assigned to one material type.
    While creating new material types following points to be considered as material type controls following things,
    1) Material is intended for certain purpose ( For ex consumption)
    2) Whether  material Number to be assigned internally or externally
    3) Number range intervals
    4) Screen sequence & which screens to be appeared
    5)Which user data can be entered
    6) Which procurement type ( Internal or external)
    7) Inventory management i.e. value & qty update  required..
    You can also change material type for a material  under following conditions.
    1) Old & new material type must be assigned to same account category,
    OR
    2) No. open PO ,stocks or reservations
    I hope this will clarify your doubts,If found useful please reward points
    Vivek Maitra

  • Change pointers are not generated when creating a material master

    Dear Experts,  
    Change pointers are not generated when creating a material master. 
    However, when a change is made to the already created material, the change pointers are created according the fields in BD52.  
    Am I missing any settings?
    I need to create change pointers immediately when I create the material master in MM01.  
    Please suggest. 
    Regards,
    Shetty

    did you follow the steps given in
    http://help.sap.com/saphelp_nw73/helpdata/en/4a/6dcbe9c95261a3e10000000a421937/frameset.htm

  • Field Ref. and SRef,mat type when creating new material types

    Hi,
    While creating new material type we are giving the Filed ref. on that basis sytem find which fields are option mand. etc. below the filed ref. there is also SRef for material type , why this fileld is use ? if this is screen sequence ref. then what is use of industry sector when creating material bcoz industry sector also determines the scrren ref. then which will follow when we creat the material.
    regards,
      zafar

    Hi,
    SRef is the Screen reference .
    You have to create the Sref then it should assign depending on the transaction.
    Grouping of transactions that determines what screens are displayed depending on the transaction when you maintain material master records. It also determines the order in which the screens appear.
    The screen reference Transaction is in table T130M.
    In material master the first reference is industry sector,then specific to the industry sector what is the material type & screen sequence.
    Regards,
    Raj

  • Material Master Data purchasing view

    Hi, All,
    I have question on material master data purchasing view. There are 2 indicators.
    One is 'automatical purchase order', what effect if I tick this box? Another is 'Source List', what effect if I tick this box?
    Thanks for your answer in advance

    Defines that purchase orders are generated automatically when purchase requsisitions are converted into purchase orders.
    Use
    If this indicator is flagged, the system does not display the purchase orders on the screen before they are saved.
    Dependencies
    In the master record for the vendor with whom the material is ordered, the field "Automatic purchase order" must be flagged in the control data for the purchasing data.
    If the source list is ticked, system expects a source list for the material with a vendor and it will not allow to create PO giving a error message,source not included despite of source list requirement if it is not created.
    Regards,

  • Create a material master data.

    Hello,
    this code doesn't create a material master data.
    Does it make sense to put additional views?
    Thank you in advance.
    DATA: w_bapimathead TYPE bapimathead.
      DATA: i_bapi_makt TYPE TABLE OF bapi_makt,
            w_bapi_makt TYPE bapi_makt.
      w_bapimathead-basic_view = 'X'.
      w_bapimathead-material = 'AAABBBCCCDDD'.
      CLEAR w_bapi_makt.
      w_bapi_makt-langu = 'EN'.
      w_bapi_makt-matl_desc = 'Screwdriver'.
      APPEND w_bapi_makt TO i_bapi_makt.
    CALL FUNCTION 'BAPI_MATERIAL_SAVEDATA'
         EXPORTING
              headdata            = w_bapimathead
         TABLES
              materialdescription = i_bapi_makt.
              write:/.

    Ilhan,
    We already take the time to reply to YOU here :
    create material master data
    Erwan

  • Complete step by step procedure to create new material group.

    Hi,
    Please suggest procedure to create new material group in R/3 system and assigning it to G/l account.
    How to reflect it into EBP ssytem.
    Many thanks in advance.

    Hi,
    T. Code: - OMSF
    Path: - SPRO >> Logistics u2013 General >> Material Master >> Settings for Key Fields >> Define Material Groups.
    Select existing material group and click on Copy As button.
    Enter material group code, material group name and long description for material group.
    Then click on save button for save material group.
    Regards,
    Mahesh Wagh

  • How create new draw layer in Spreadsheet View Multisim Symbol Editor ?

    Hello,
    I would like to know how create new draw layer in Spreadsheet View Multisim Symbol Editor ?
    I am interested in this to create a contact or switch with 3 positions (one in and three out).
    So ... ??
    Best regards

    Hi,
    I am not really sure what you are trying to do with a new layer but the spreadsheet was hard coded and you cannot add a new layer.  In the Symbol Editor, there is a rectangle with dash lines, this is the symbol boundary and you can select Edit>>Resize Boundary Box to make the boundary larger/smaller.  Whatever you draw must be inside the boundary, you can only place pins outside the boundary.  The switch you created will not toggle in simulation, only the switches in the Master database can do this, R&D have to program them to toggle.
    Tien P.
    National Instruments

  • How to understand Note1305698 creating new material batch masters data

    Hi, Expert:
    In note 1305698 have below description：
    When creating new material masters for materials subject to batch management and using
    classified batches, it is not possible to create the first batch record in the EWM system. This
    means that, for a material, the first batch is always created in the EWM system and must be
    transferred to the EWM system because this creates the connection between material and class.
    I confused by this statement.
    The first batch record should be created in which system, ERP or EWM?
    The first batch is always created in which system, ERP or EWM？
    BR.

    Hi,
    sorry, that is a typo in the english translation of the note. The original german says: "Dies bedeutet, dass zu einem Material die erste Charge jeweils immer auf ERP-Seite angelegt und an das EWM-System übertragen werden muss, da hierdurch die Verbindung zwischen Material und Klasse angelegt wird."
    (now translated from me): This means that, for a material, the first batch is always created in the ERP system and must be transferred to the EWM system because this creates the connection between material and class.
    I will ask for a correction.
    Best regards
    Juergen

Maybe you are looking for