MM01 error while uploading in 'N' mode and successfull in 'A' mode

Hi experts,
I am uploading material master data and when I set in A mode I could create a material,but when I execute in N mode, it is throwing error as 'enter material type'. could you please help.
Thanks....

Hi,
Use as like below.
    WA_CTUPARAMS TYPE CTU_PARAMS.
WA_CTUPARAMS-DEFSIZE = 'X'.
WA_CTUPARAMS-DISMODE = 'A'.
WA_CTUPARAMS-UPDMODE = 'S'.
WA_CTUPARAMS-NOBINPT= 'X'.
CALL TRANSACTION 'MIRO' USING IT_BDCDATA                           "MODE 'A' UPDATE 'S'
         MESSAGES INTO IT_BDCMSGCOLL OPTIONS FROM WA_CTUPARAMS.
Regards,
Ashok.

Similar Messages

Error while uploading stock using Mb1c and migo

Hi
Following error is showing,while uploading stock using Mb1c and migo
Return code 8 is not permitted with BAdI 'FAGL_PERIOD_CHECK'
Can anyone help me?/
Thanks

Hi
You will need the help of an abaper in solving this , as a BAdi FAGL_PERIOD_CHECK - Posting Period Check has been activated.
Please check the implementation of the BAdi , i feel that it has not been implemented properly.
This Business Add-In (BAdI) enables you to extend the existing check of open posting periods.
The result of the period check is provided to you as a parameter (CH_SUBRC). In your implementation, you can derive this parameter again (for example, if a posting is rejected under a certain condition).
The following values are allowed for parameter CH_SUBRC:
0 Posting allowed
4 Period & is not open for account type & and general ledger &
6 No authorization for posting period & &
This is a custome developemnt , so only the ABAper present at your end will be able to resolve it.
Thanks & Regards
Kishore

Error While uploading the Function and Function_BP

Hello,
I am getting the following error while uploading the Functions and Funtions_BP using the Rule Upload functions.
com.virsa.cc.comp.Function_upload.onActionUploadFunc(Function_upload.java:302) com.virsa.cc.comp.wdp.InternalFunction_upload.wdInvokeEventHandler(InternalFunction_upload.java:150) com.sap.tc.webdynpro.progmodel.generation.DelegatingView.invokeEventHandler(DelegatingView.java:87) com.sap.tc.webdynpro.progmodel.controller.Action.fire(Action.java:67) com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.doHandleActionEvent(WindowPhaseModel.java:420) com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequest(WindowPhaseModel.java:132) com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processRequest(WebDynproWindow.java:335) com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:143) com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:321) com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingStandalone(ClientSession.java:713) com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:666) com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:250) com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:149) com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62) com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doPost(DispatcherServlet.java:53) javax.servlet.http.HttpServlet.service(HttpServlet.java:760) javax.servlet.http.HttpServlet.service(HttpServlet.java:853) com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401) com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266) com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386) com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364) com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039) com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265) com.sap.engine.services.httpserver.server.Client.handle(Client.java:95) com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175) com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33) com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41) com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37) java.security.AccessController.doPrivileged(Native Method) com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:104) com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:176)
The files which i am uploading the file from the Best practises only.
What is the reason for this error?
Did any one get this error?
Regards,
Kumar Rayudu
Edited by: Kumar Rayudu on Aug 4, 2009 12:32 PM

Hello Kumar,
Have you uploaded the SAP text and object files? Upload them first and then try to upload functions.
Harleen
SAP GRC RIG

Error while uploading SSRS Reports to SharePoint Report Library

Dear All,
I am having a SSRS Server running in SharePoint integrated mode and I am running reports in SharePoint successfully, but I am facing issue with one site as shown below.
I am getting below error while uploading a report to specific path as shown below;
I can upload to any link but not for the below link shows /departments/ocean
I checked my ReportServer paths from RS Configuration Manager and I cannot find that defined path there. But I can see all other links are registered()
Note: Below shows my web applications in SharePoint farm(four web sites). I have define paths(site collections) only in default web application, not in other webs which has a port number.
I am not sure how the RS Configuration Manager picks thoae Define Manage Path in site collections.
But I think, it should pick department site collections as well.
Could you please guide me how to rectify above error?
ASP.Net, C#.Net, SQL Server ,Win32

Hi,
I recommend to check you can connect to the site collection in Report Builder.
If not, please check if you have permission to access the site collection.
Please also check if the Report Server Integration Feature is activated in the site collection.
To narrow the issue scope, I recommend to create a new site collection using the departments path in SharePoint to see if the issue still occurs.
As a workaround, you can also save the report to local drive and then upload it to SharePoint library using Upload Document button in the ribbon in SharePoint library.
In the meanwhile, you can post your question to the forum for SSRS: http://social.technet.microsoft.com/Forums/sqlserver/en-US/home?forum=sqlreportingservices.
More experts will assist you, then you will get more information relation to SSRS.
Best regards.
Thanks
Victoria Xia
TechNet Community Support

Error While Uploading GL Master Data in LSMW

Hello Experts,
I am running into error while uploading GL master data in LSMW, I created recording through FS00, then I mapped the fields, it all went good till 13th step, but last step got stuck(Run Batch Input Session), when I am running batch input session, system is showing this message "Function Code cannot be selected"
Your help would be highly appreciated.
Regards
Muhammad Yousuf Ali
SAP FI Consultant

Hi,
first can you pls check your Hierarchy mode setting in FS00 - before executing Batch input session -
Open FS00 - go to settings - and Do not display navigation tree select radio button and save it
then Now Run fresh LSMW - your issue will resolve
Mahesh

Error while uploading Template

Error while uploading Template in Internet Procurement Catalog Administrator responsibility
I downloaded "Item Price" and i had one item onto spread sheet and tried to upload in above responsibility.
This is how header level is in the template and line level has item information.
#ENCODING     Cp1252
Language Section*     EN-US
Catalog Section     Supplier*      Title
     FEDERAL INDUSTRIES     Test Catalog
***********When i looked into log file i see error message ********************
[5/20/11 7:58:13 PM] <INFO> Session language altered to AMERICAN
[5/20/11 7:58:13 PM] <INFO> Session territory altered to AMERICA
[5/20/11 7:58:13 PM] <INFO> ********** Loader started **********
[5/20/11 9:35:08 AM] <ERROR> USR:MSG:POM_CAT_MISS_LANG_SEC
[5/20/11 9:35:08 AM] <ERROR> -> Missing Language Section.
[5/20/11 9:35:08 AM] <INFO> *********************
[5/20/11 9:35:08 AM] <ERROR> Failure Message is ::
[5/20/11 9:35:08 AM] <ERROR> USR:MSG:POM_CAT_MISS_LANG_SEC
[5/20/11 9:35:08 AM] <INFO> *********************
[5/20/11 9:35:08 AM] <INFO> Job failed
[5/20/11 9:35:08 AM] <INFO> ********** Loader stopped **********
I already had language section in the template as shown above, not sure why it is giving error.
could you please let me know how to troubleshoot
Edited by: 855902 on May 20, 2011 5:02 PM

Hi,
We believe you are getting this error because of some kind of format issue in the flat file which you are loading..
You can refer below URL:
http://appswork.blogspot.com/2009/09/catalog-loader.html
/S.P DASH

Error while uploading BITMAP image in SAP through SE78.

Hello all,
I am getting below error while uploading image into SAP through SE78.
'Bitmap file: No color table available (True Color, Bitcount 32)'.
I have tried searching for solution and got some help from below reply from a thread:
You may do these options:
1. Lower the resolution of the image
2. Lower the file size of the image
Regards,
Reymar
I have got a image size of 6.14 KB and resolution of 72*72 dots per inch.
Thanks in Advance.
- Jayant Sahu.

Hi Daniel,
First of all, if you dont mind, start a new thread for your question please.
Anyways, answer to your question is --
You need to save your picture with lower-most bits BITMAP Type. When you were saving your picture as .bmp, take care you are passing lower-most BITMAP type and not 24-bit as it may be as default.
This way, your problem would be resolved.
Thanks.
Kumar Saurav.

Error while uploading Transport request

Hi friends,
Error while uploading transport request to the transport directory,
we downloaded the trasnport request from one sap system which have a set of developments
for example downloaded files are;
control file: K900470.SAD and Data file: R900470.SAD fronm transport directory.
we are trying to upload the transport to another Sap system
we have
Uploaded the controlling file K900470.sad to the location  /usr/sap/transpad/cofiles/
Uploaded the controlling file R900470.sad to the location  /usr/sap/transpad/data/
we tried tro add in the import queues using TCODE: STMS
and trying to import.
During import we get
error:
HALT: unknown dynpro format: d021s_length() returned 0 Please contactthe SAP support.
End with rc : 16
Please help me with the problem.
Thanks in advance
Deepak

Hi,
Check the versions of the two sap systems you are downloading and uploading the transport requests

DB Connect Load - "Unknow error while uploading data from the DB Table"

Hi Experts,
We have our BI7 system connected to Oracle DB based third party tool. The loads are performing quite well in DEV environment.
I would like to know, how we transport DB Connect datasources to Quality systems? Any different process to be followed for DB Connect datasources?
At present the connections between BI Quality and the third party quality systems are established. We transported the DataSource from BI DEV system to BI quality system, but on trigerring an infopackage we are not able to perform loads. It prompts - "Unknow error while uploading data from the DB Table".
Also on comparing the DataSources in DEV system and Quality system there are no fields in "Proposal" tab of datasource in Quality system. Also I cannot change or activate Datasource in Quality system as we dont have change access in quality.
Please advice.
Thanks,
Abhijit

Hi,
Sorry for bumping an old thread ....
Did this issue get ever get resolved?
I am facing the same one. The loads work successfully in Dev. The transport for DBConnect DS also moved in successfully.
One strange this is that DB User for dev did not automatically change to db user from quality when I transported the DBConnect datasource. DBCon DS still shows me the DB User from Dev in Quality system
I get "Unknown Error" whenever I trigger the data package.
Advait

"error while trying to synchronize Audio and MIDI"

Hello All,
Just got Logic 8... installed (as upgrade from 7)
I keep (consistantly) getting this:
"error while trying to synchronize Audio and MIDI" when in play or record mode... has anyone any ideas regarding a 'fix' or maybe even to point out stupidity on my part re settings; I'm open to comments here and would obviously love to get this fixed/sorted out.
System is basically: G5 Dual 1.8/OS 10.4.10/MOTU 828 Mk2
Thanks in advance.

Hi,
I first did what the manual was telling me but that made no difference as the sync would drop within 5 to 15 bars... very frustrating.
Since my original posting I have spoken with MOTU regarding this Audio/MIDI sync problem. There is evidently a simple reset that needs to be done (that is if like me you are using a MOTU 828 Mk2 interface), you have to toggle through both digital input and output settings in the Audio Control Panel. The problem then goes away.
I hope that is helpful. I think that this probably is relevant to all MOTU interfaces, or is at least worth trying if you are having this problem... maybe other manufacturers too... ?
Cheers, Kick

Getting error while uploading a document in a library

Hi,
I'm getting a weird error while uploading the document in the library. And I don't get it all the times but most of the times.
It reads:
The file <library name>/<file name> has been modified by i:0#.<user-id> on <datetime stamp>
How to resolve this ? I have referred many articles on this one, but none helped.
Thanks for your response in advance.
Regards

Hi Prajk,
Based on your description, I recommend to check if there are any ItemAdded event receiver or workflows which are triggered when an item is created to update the document properties in the library.
If there is any ItemAdded event receiver on the library, I recommend to wait for ItemAdded to finish before the ListFieldIterator control residing on EditForm.aspx loads (It’s the ListFieldIterator which displays the Item’s fields ).
http://blogs.msdn.com/b/manuj/archive/2009/09/22/itemadded-event-on-document-library-the-file-has-been-modified-by-on-error.aspx
If there is any workflow on the library, I recommend to add a Pause for Duration step at the beginning of the workflows.
If above cannot work, please check ULS log for detailed error message.
For SharePoint 2013, by default, ULS log is at C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\15\LOGS.
Best regards.
Thanks
Victoria Xia
TechNet Community Support

Error while uploading text file....

Halo Friends,
I am uploading 4 text files which contain three columns separated by a tab, but when i am trying to upload those files using WS_UPLOAD Function Module i am getting a runtime error saying 'error while uploading/downloading'.
Please solve this problem as soon as possible.
Thanks in Advance,
rama

Halo again,
Now that i am able to upload the files, i need to update the database table the update statement is executing correctly but when i debug i see that the sy-subrc value is 4 but not 0.
and hence the it is not committed.
Any suggestions. i am pasting my code here for your reference:
Tables: qmfe.
data: begin of gt1_qmfe occurs 0,
      qmnum       like qmfe-qmnum,
      fenum       like qmfe-fenum,
      /itml/usr20 like qmfe-/itml/usr20,
      end of gt1_qmfe.
data: begin of gt2_qmfe occurs 0,
      qmnum       like qmfe-qmnum,
      fenum       like qmfe-fenum,
      /itml/usr21 like qmfe-/itml/usr21,
      end of gt2_qmfe.
data: begin of gt3_qmfe occurs 0,
      qmnum       like qmfe-qmnum,
      fenum       like qmfe-fenum,
      /itml/usr19 like qmfe-/itml/usr19,
      end of gt3_qmfe.
data: begin of gt4_qmfe occurs 0,
      qmnum       like qmfe-qmnum,
      fenum       like qmfe-fenum,
      /itml/usr07 like qmfe-/itml/usr07,
      end of gt4_qmfe.
data: gs1_qmfe like line of gt1_qmfe,
      gs2_qmfe like line of gt2_qmfe,
      gs3_qmfe like line of gt3_qmfe,
      gs4_qmfe like line of gt4_qmfe.
data: ls_lines1 type i,
      ls_lines2 type i,
      ls_lines3 type i,
      ls_lines4 type i.
parameters: ip_file1 type RLGRAP-FILENAME default 'C:\Urgent\TextFiles\StoDt.txt'     obligatory,
            ip_file2 type RLGRAP-FILENAME default 'C:\Urgent\TextFiles\RcDtCust.txt' obligatory,
            ip_file3 type RLGRAP-FILENAME default 'C:\Urgent\TextFiles\DockDate.txt' obligatory,
            ip_file4 type RLGRAP-FILENAME default 'C:\Urgent\TextFiles\AWB.txt'       obligatory.
field-symbols: <fs1> like gs1_qmfe,
               <fs2> like gs2_qmfe,
               <fs3> like gs3_qmfe,
               <fs4> like gs4_qmfe.
perform upload_gt1_qmfe.
perform upload_gt2_qmfe.
perform upload_gt3_qmfe.
perform upload_gt4_qmfe.
perform update_qmfe.
*&      Form upload_gt1_qmfe
      text
--> p1        text
<-- p2        text
FORM upload_gt1_qmfe .
CALL FUNCTION 'WS_UPLOAD'
EXPORTING
   FILENAME                      = ip_file1
   FILETYPE                      = 'DAT'
TABLES
    DATA_TAB                      = gt1_qmfe.
describe table gt1_qmfe lines ls_lines1.
write: / ls_lines1.
ENDFORM.                    " upload_gt1_qmfe
*&      Form upload_gt2_qmfe
      text
--> p1        text
<-- p2        text
FORM upload_gt2_qmfe .
CALL FUNCTION 'WS_UPLOAD'
EXPORTING
   FILENAME                      = ip_file2
   FILETYPE                      = 'DAT'
TABLES
    DATA_TAB                      = gt2_qmfe.
describe table gt2_qmfe lines ls_lines2.
write: / ls_lines2.
ENDFORM.                    " upload_gt2_qmfe
*&      Form upload_gt3_qmfe
      text
--> p1        text
<-- p2        text
FORM upload_gt3_qmfe .
CALL FUNCTION 'WS_UPLOAD'
EXPORTING
   FILENAME                      = ip_file3
   FILETYPE                      = 'DAT'
TABLES
    DATA_TAB                      = gt3_qmfe.
describe table gt3_qmfe lines ls_lines3.
write: / ls_lines3.
ENDFORM.                    " upload_gt3_qmfe
*&      Form upload_gt4_qmfe
      text
--> p1        text
<-- p2        text
FORM upload_gt4_qmfe .
CALL FUNCTION 'WS_UPLOAD'
EXPORTING
   FILENAME                      = ip_file4
   FILETYPE                      = 'DAT'
TABLES
    DATA_TAB                      = gt4_qmfe.
describe table gt4_qmfe lines ls_lines4.
write: / ls_lines4.
ENDFORM.                    " upload_gt4_qmfe
*&      Form update_qmfe
      text
--> p1        text
<-- p2        text
FORM update_qmfe .
data ls_cnt type i.
loop at gt1_qmfe assigning <fs1>.
update qmfe set    /itml/usr20 = <fs1>-/itml/usr20
            where qmnum       = <fs1>-qmnum
            and    fenum       = <fs1>-fenum.
if sy-subrc = 0.
commit work.
add 1 to ls_cnt.
endif.
endloop.
write: / ls_cnt.
ENDFORM.                    " update_qmfe

Error while uploading file in BPS

Hi all,
I am getting an error while uploading file to BPS through web interface
I get a red stop button with error message : error while calling up RFC.
when i double click the red stop button, i get no long text but the error message I get is UPC 202
please advice me to resolve this issue.
many thanks in advance,
Ravi

The informations are really not much to have an idea about the problem.
The problem can be located in the fm that calls the file because is trying to search the file on a system where there are some kind of problems in the communication between the systems involved to read and pass the file. Did u map the file name with logical filenames ? Very strange problem. Can you browse in the server where the file is located . Is it on your pc ?
Or, there is some problem in the datas provided, but this problem should arise more when you save than when you just press to load.
With this kind of imformations is very hard to have an idea. You need to debug to see what s going on
Regards

Error while uploading Bank statement for BACS

Hi All,
We are facing a error while uploading a bank statement for BACs, the system is not autoposting (clearing the open items) for the BACs file. The bank statement is as below
:20:20081015
:25:200000/50414107
:28:28290/01
:60F:C081015GBP1176,45
:61:0810151015DX448,97FDDRNONREF//
:86:999/00DDRARVAL             1875180
:61:0810151015DX779,07FDDRNONREF//
:86:999/00DDRBP OIL UK RECPS AC230679BI2898784
:61:0810151015DX24469,50FDDRNONREF//
:86:999/00DDRSAPBACS0000341816               BACS
:61:0810151015DX233018,83FDDRNONREF//
:86:999/00DDRSAPBACS0000340411               BACS
The last line items BACS file is not posting the document but we have manually auto cleared the document.
Can any one let me know what has caused the error. And where to check out the setting of this.
Thanks and Regards
Sri

solved myself

Error while uploading an edited excel file into an internal table

Hi Experts,
I am getting error while uploading an excel file that has been edited.
I am using GUI_UPLOAD for uploading the file into internal table.
In my program I first have to download a file, if I use the same file without editing I am able to read the file.
When I try to edit it and then use it to upload it fails, but this is part of the my requirement.
PLease suggest.
Regards
Kishore

TYPE-POOLS: truxs.
parameter :    lv_full_path     TYPE rlgrap-filename,
data : lt_conv_data   TYPE truxs_t_text_data,
          lt_roles_excel   type table of ( your structure).
start-of-selection.
        CALL FUNCTION 'SAP_CONVERT_TO_XLS_FORMAT'
          EXPORTING
            i_line_header        = 'X'
            i_filename           = lv_full_path
          TABLES
            i_tab_sap_data       = lt_roles_excel
          CHANGING
            i_tab_converted_data = lt_conv_data
          EXCEPTIONS
            conversion_failed    = 1
            OTHERS               = 2.
In the FM Line_header = 'X' means it will negelect the first line. So u can give the heading in the excel file.
Hope this might help u .
With Regards,
Sumodh.P

MM01 error while uploading in 'N' mode and successfull in 'A' mode

Similar Messages

Maybe you are looking for