MM01-Industry sector
Hi all,
While creating material code using MM01 i have wrongly put industry sector as OILl.Now i need to change the industry sector. specify which Trasancation Code to be used.
or specify some procedure.
Hi
Industry Sectors
Use
When you create a material master record, you are required to classify the material according to
industry sector and material type.
Like material types, industry sectors have control functions in the R/3 System. For example, it is
a factor determining the screen sequence and field selection [Page 97] in a material master
record. Once you have assigned an industry sector to a material, you cannot change the industry
sector again afterwards.CChheemmiiccaall iinndduussttrryy
MMeecchhaanniiccaall eennggiinneeeerriinngg
Features
The standard R/3 System contains the following industry sectors. The ID used to identify the
industry sector internally appears in parentheses.
Plant engineering and construction (A)
Chemical industry (C)
Mechanical engineering (M)
Pharmaceuticals (P)
The other sectors are for retail.
Activities
Your system administrator can define other industry sectors in Customizing for the Material
Master in Define Industry Sectors and Industry-Sector-Specific Field Selection [Ext.].
This is MM tutorial notes
Industru sector cannot be changed in std SAP
Raja
Similar Messages
-
Ignificance of the Industry Sector selection in the Material Master
hi all,
We need information on the significance of the Industry Sector selection in the Material Master field. I understand that it can influence field selection and the screen sequence of the material master record. We are particularly interested to know the influence of the industry sector u201CPharmaceutical Industryu201D .
Any inputs would be greatly appreciated.Hi
Please check follwoing links
[MM01- Industry Sector;
[http://help.sap.com/saphelp_46c/helpdata/en/ff/515b3149d811d182b80000e829fbfe/content.htm]
1. Define Industry Sectors and Industry-Sector-Specific Field Selection (transaction OMS3) -> assign a field reference to field selection
2. Maintain Field Selection for Data Screens (transaction OMS9) -> define a specific field selection for a field selection group (for example, depending on industry sector (the field reference appears on the lower table control).
Like the material type, the industry sector also has a control function. When you create a material master record, the industry sector determines:
Which screens appear and in which order
Which industry-specific fields appear on each screen
The industry sector you assign to a material cannot subsequently be changed. In Customizing, you can define new industry sectors and maintain the field reference for field selection control according to your enterprise-specific requirements.
Most data in the material master record can be maintained directly by the user. But some information is automatically updated by the system. When you enter goods movements, for example, the system updates the stock and consumption data. Statistical information, such as the date of original creation and that of the last change, can be invoked with , with the quick-info text Information on material.
Some data in the material master is used for information purposes only, for example, description, size, and dimensions. Other material data has a controlling function in an application. For example, the MRP type controls the MRP procedure and the price control indicator determines which material valuation procedure is used
Regards
Kailas ugale -
Number of entries in the list industry sector varies (Transaction MM01)
Hell friends
I have 2 different ECC servers. When I try to create a material using transaction MM01, I see different lists on them.
Both of them were installed recently and so everything available there are standard SAP created data.
When I enter transaction code MM01 and select the list Industry Sector on the first server, I see a huge list starting with AgriculturalServices, AutoRepairServicesParking, BldgMaterialsHWGardenSupp etc. (More than 25 in number).
However, I try the same thing on the second server I see only 5 of them. I am looking for Finished product on this second server and I don't see that, which is a standard industry sector according to what I have read.
Could some one please let me know why this difference and also how to see all the entries in the list?
Your response will be highly appreciated.
Tks
RamHi,
Check table V137 in both servers and also
check ENHANCEMENT patch level of both the servers
Thanks
Diwakar -
How to keep Industry sector and Material Type in Display for Tcode MM01
How to keep Industry sector and Material Type in Display for Tcode MM01( create material Initial screen)
Thanks,Hi
Yes, your requirement is possible using screen variant
1. use tcode SHD0
2. give transaction as MM01
3. goto screen variant tab - assign some name - enter program name and screen name
(from mm01 - F1 help)
4. goto transaction variant tab - assign some name - assign already defined screen variant name
5. goto standad variant tab - transaction variant name already fetched automatically - click on active button (it was placed after transaction variant name
Raju -
Which Industry sector should i use for 'button'(Cloth) when MM01
Hi!
Could you kindly let me know, thank you very much!Hello,
I don't think there is a standard industry sector maintianed for Garment industry (Cloth industry) in R/3.
You may define your own industry sectors. Industry sectors is also a factor which determines the screen sequence and field selection in a material master record. Once you have assigned an industry code to a material master, it is not changeable.
The transaction for defining new industry section and field selection is OMS3. It is advicable to seek the help of an MM expert for the same.
Prase -
Relationship between material type and industry sector
Hi experts
when using t-code mm01,there are two fields material type and industry setor in screen.Is there any relationship between material type and industry sector? I want to know if user be able to see the material type related to particular industry sector?
thanks in advance!Hello
There is no direct relationship between the material type and the industry sector.
The industry sector is used only for field sttus maintenance (fields in display/optional/requierd entry) in transactions.
We will assign seperate field reference groups to industry sectors and deopending on how we configure the field references, the fields will appear for the materials created for that industry sector.
regards -
Restiction of material types based on the industry sector?
I have developed specific industry sector for my client and also developed specific material types (Z*) for them.
But then i cannot prevent my user from creating the material master with the incorrect industry sector and also they are able to create material types choosing the incorrect material type?
Can somebody please advise how to restric this.
Thanks
RegardsIn the MM01 trxn ..
Enter Industry sector & Material Type.
then Click > Defaults > Industry Sector > Put tick to Industry sector ..
So, that the Z* Industry sector will become Default..
As user will not see Industry sector , there is no Question of changing..
Pls do it for All Users.. -
How to modify industry sector of material master data
dear all:
i have already created a material master data using a wrong industry sector through tcode MM01.
and i have created BOM&ROUTTING for this material.
now ,i want to modify the industry sector of this material.
what should i do for this case?
thank you!
best regards!Hi,
Industry sector is at client level & once you create the material you can't change the industry sector.
However, if you have debug rights then you can change it directly in the table MARA with field MBRSH.
Hope your query get resolved.
Thanx -
BAPIs for populating Industry Sector and Material Type dropdowns
Hi all,
I have a requirement to create WebDynpro appliation,
which is the replica of MM01 Transaction page.
In the first page i want to populate Industry sector
values and Material Type values in 2 dropdowns.
Can anyone please tell me what are the BAPIs i need to
call and how to find the required BAPIs?
ThanksYou can use the function module RFC_READ_TABLE. The tables that you need to read are T137 for industry sector and T134 for material type.
Regards,
Rich Heilman -
Set Industry Sector filed as display field in Material Master
Hi folks!!
In MM01 material master creation, I want to make Industry sector field as only display field, can anyone help me how to do this.
Best regards,Dear,
Check this thread where explained in detail your requirement:
How to keep Industry sector and Material Type in Display for Tcode MM01
Regards,
Syed Hussain. -
Hi,
We are Service Industry.
We need to define Industry Sector.
In the IDES, Industry Sector u201CService Provideru201D is defined with Screen reference depending on the industry sector as u201CMu201D.
Can we do the same for the Production Server?
Pls. advise.
Regards,hi ,,
you can do in production server also
go to MM01 -go to customize layout click
select options --select expert tick mark the show keys in all dropdown you will get it
Regards
G.Ganesh Kumar -
Hi,
There is a need to hide the not required industry sectors in MM01 drop down
Is there any way we can hide that.
Thanks
DiwakarHii,
You can set the default industry sector in any of the material master screen i.e creation and change mode (mm02).
Go to T-Code: MM02
Go to menu Defaults
Select the Industry Sector
It will ask for the default industry sector assign
Check Box the Hide Industry sector on initial screen
When ever u create the material code the default Industry sector will be the assigned one in the default values.
Regards,
Kumar -
Dear All ,
In Creating material master mm01 there is a column of industry sector there 5 types of industries sector are created like mechanical,chemical etc how can i create another like electrical industries sector.
AminHi,
The Industry Sector and Material Type fields on the initial screen are mainly control fields i.e. they control the screen sequence, views and fields in the data screens of the
material master record.
A number of different Industry Sectors and Material Types exist in standard SAP R/3,when companies need more they can define these in Customising according to their
own requirements.
Yes, you can create for Electrical Industry type in the path given by other buddies.
Regards,
Vengat -
dear all,
is it possible that MM01 when i am creating material i selected a industry sector and i can attach specific material types. i mean i selected industry sector abcd then it should pick up only roh, verp, and fert only.
regards,
qsm sapHi,
In that case you have use special transactions for material creation;
MMB1 Create Semifinished Product &
MMD1 Create MRP Profile
MMF1 Create Finished Product &
MMG1 Create Returnable Packaging &
MMH1 Create Trading Goods &
MMI1 Create Operating Supplies &
MMK1 Create Configurable Material &
MML1 Create Empties &
MMM1 Create Message: Material Master
MMN1 Create Non-Stock Material &
MMP1 Create Maintenance Assembly &
MMR1 Create Raw Material &
MMS1 Create Service &
MMU1 Create Non-Valuated Material &
MMV1 Create Packaging &
MMW1 Create Competitor Product & -
Issue in creating a dropdown for Industry sector field
Hello Gurus,
Am trying to create a dropdown for Indusry field. 3 dropdown should come up for Industry sector field namely primary,secondary and tertiary.Corresponding to the value selected in primary,data should come up in Secondary and corresponding to value selected in secondary ,data should up in tertiary.Am only able to fetch the value at first instance but corresponding values are not coming up secondary and tertiary.I have followed the procedure that had to be followed in order to make a field as dropdown.Can anyone Please help.
In get_v , i have added this code.
DATA: lt_ddlb TYPE bsp_wd_dropdown_table,
wa_ddlb LIKE LINE OF lt_ddlb.
DATA:
lr_entity1 TYPE REF TO if_bol_bo_property_access,
lv_index TYPE sytabix,
lr_collection TYPE REF TO cl_bsp_wd_collection_wrapper,
lv_high_ind_sector TYPE string,
lv_istype TYPE string.
CLEAR: wa_ddlb, lt_ddlb
lr_collection = me->GET_COLLECTION_WRAPPER( ).
lv_index = lr_collection->get_current_index( ).
IF lv_index = 1.
lr_entity1 ?= lr_collection->find( iv_index = lv_index ).
lv_high_ind_sector = lr_entity1->get_property_as_string( iv_attr_name = 'INDUSTRYSECTOR' ).
lv_istype = lr_entity1->get_property_as_string( iv_attr_name = 'INDUSTRYSECTORKEYSYSTEM ' ).
CLEAR: lv_high_ind_sector.
ELSE.
lv_index = lv_index - 1.
lr_entity1 ?= lr_collection->find( iv_index = lv_index ).
lv_high_ind_sector = lr_entity1->get_property_as_string( iv_attr_name = 'INDUSTRYSECTOR' ).
lv_istype = lr_entity1->get_property_as_string( iv_attr_name = 'INDUSTRYSECTORKEYSYSTEM ' ).
ENDIF.
SELECT aspras aind_sector atext INTO CORRESPONDING FIELDS OF TABLE GT_IND_SECTOR FROM tb038b AS a INNER JOIN tb038a AS b ON bistype = a~istype
AND bind_sector = aind_sector
AND b~istype = lv_istype*
AND b~father_sec = lv_high_ind_sector.
Loop at GT_IND_SECTOR into wa_ind_sector.
wa_ddlb-key = wa_ind_sector-ind_sector.
wa_ddlb-value = wa_ind_sector-text.
Append wa_ddlb to lt_ddlb.
endloop.
IF lt_ddlb IS NOT INITIAL.
INSERT INITIAL LINE INTO lt_ddlb INDEX 1.
ENDIF.
IF GR_DDLB_INDUSTRY_SEC IS NOT BOUND.
CREATE OBJECT GR_DDLB_INDUSTRY_SEC
EXPORTING
iv_source_type = 'T'.
IF sy-subrc = 0.
GR_DDLB_INDUSTRY_SEC->set_selection_table( it_selection_table = lt_ddlb ).
ENDIF.
ENDIF.
rv_valuehelp_descriptor = GR_DDLB_INDUSTRY_SEC.Hello,
Not sure I understood your requirement 100%, but kindly check the following thread where a question on How-to make dropdown list values dependent has already been answered:
How to link the first Drop down values witht the second Drop down Values
Regards,
Nicolas Busson.
PS: also it would be good to know your CRM version... because I thought this thread was posted in the WebClient forum, but it's not.
Maybe you are looking for
-
I cannot reboot as i cannot see anything on the screen. Ive tried to restart and tried control alt delete, and f8 on start....still no response? Anyone have ideas?
-
Can't Create New Excel Project Visual Studio 2013 Office Tools The Project Cannot Be Created
I am having this issue on two computers. If I try to create an Excel 2013 Workbook C# in new projects, and choose create a new workbook, it starts to open Excel, and then I get this error in VS I have tried: Uninstall & Reinstall of VSTO from the Vis
-
Can't get rid of an e-mail address on iPhone
I send an e-mail from my iPhone and it was the wrong e-mail account. Now, I can't seem to delete it from my iPhone. I have deleted it from my mail account online, I have deleted it from my contacts, I have deleted it from my outlook. I have synched a
-
Flattened png. files only render in black and white
Hi, I have been working with fireworks on a daily basis for over a year now, and I have never come across this problem. I think it's either a setting, or I have some sort of bug. But here's whats going on: I design websites and so I use lots of .png
-
Text Formatting Rules for sibling elements
How would you edit the EDD Text format rules of an element repeated several times after one sibling optional element? For example, you have the following elements, it's children, and their formats: 1. TASK (with Title) A. TOPIC (w/ Title) (1