MM01 Screen Exit
Hi all,
I have added a field using screen exit within MM01. In screens tab at SE38 i can see the field that i've added but when i try to use MM01 or MM02 i'm not able to see the field. Is there any generation or another error ?
Regards,
Hi ,
Please ask the Functional Consultant to add the New Subscreen Created in Configuration .
Regards,
Sriram
Similar Messages
-
Screen EXITS and Badi's for MM01 t.code
Hai Guru's,
I hav a requirment of add a aditional tab in the standard Master 'MM01' T.code.
can any one please help me with all possible Screen exits or badi's. Also i want to know weather selecting correct exits depend on the position where we want the new Tab to be placed?
Thank U in advance.Hi
EXITS :
MGA00001 Material Master (Industry): Checks and Enhancements
MGA00002 Material Master (Industry): Number Assignment
MGA00003 Material Master (Industry and Retail): Number Display
BADI's
MG_MASS_NEWSEG User-Specific Fields & Segments in Mass Maintenance
MATGRP_SKU_UPD BAdI for the Article Hierarchy Connection
CDT_CHECK_MATERIAL Checks for Existence of a Material in a CDT
BADI_MM_MATNR
BADI_MAT_F_SPEC_SEL BAdI for Material Special Field Selection
BADI_MATNR_CHECK_PVS
BADI_MATERIAL_REF Addition of customer-defined default data for material
BADI_MATERIAL_OD
BADI_MATERIAL_CHECK Enhanced checks for material master table
BADI_GTIN_VARIANT
BADI_EAN_SYSTEMATIC
Regards
Pavan -
Screen-Exit MM01/MM02/MM03 - Problems when I try to retrieve the data saved
Hi guys,
I created a Screen-Exit in the Accounting View of MM01/MM02/MM03 because I need to insert data into the fields of an Append Structure of the table MBEW, that I created.
So, I can insert the data through an User-Exit. I Export to the Memory the data from my Screen-Exit and I modify the Fields content of MBEW inside of this User-Exit.
I need to select these data and show it, because the selection is not automatic. I don't know if it could be automatic.
Inside of the Screen-Exit there are some tables available, but they are empty and I can't retrieve the data because I don't have
the Material Number nor other data of MBEW. When I run MM02, for example, the User-Exit is not started and so
I can't export the data to the Memory and after that to select the data. This User-Exit is only started when I save the data...
I found not any BADI too...
Please, could someone help me?? How I could solve this question?
Thanks a lot!
Regards,
Marcos Fernando DottaHello Marcos,
Please see OSS note 44410 - Integrating cust. - specific fields in matl master.
Kind Regards,
Rae Ellen Woytowiez
Link: [https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=44410] -
Screen exit for making mandatory of existing fields in MM01
Hi friends,
In MM01 transaction and MM02 transaction i want to make fields MVGR4 and MVGR5 mandatory in sales org view 2 for some peticular plants. please help.
I tried USER EXIT MGA00001 fort this. but the problem is if we r saving from other tabs the cursor is not positioning to the sales org2 tab.
thanx in advance.
JijoHi Hoffmann,
Thks for responding. I will make you clear the procedure tht i have followed
1) Copied the MGD1 function group to ZMGD1.
2) Copied MARA table into ZMARA.
3) Followed the procedure given in website - http://www.****************/Tutorials/ExitsBADIs/MM/MM01.htm
4) Added two fields in screen 0001 pattno patttype.
4) Successed in creation of screen and it is even showing when i am opening MM01 screen basic data1 the two fields that i have added.
5) Issue is when i am giving the data it is not gettong stored in ZMARA table, as i have not given the coding in USER exit EXIT_SAPLMGMU_001 my new fields data will not be saved but the material number has to be saved thts my doubt.
Hope it is pretty clear.!!! -
Hi Folks,
I am doing some enhancements for MM01 Tcode.we need to add new screens to MM01. could any one tell me the available screen exits or BADI' s for tcode MM01. thnx in advance.
santosh.Hi,
Check these:
MGA00001 - Material Master (Industry): Checks
and Enhancements
MGA00002 - Material Master (Industry): Number
Assignment
MGA00003 - Material Master (Industry and
Retail): Number Display
Check with 'BADI_MATERIAL_REF'
Refer
http://www.****************/Tutorials/ExitsBADIs/MM/MM01.htm
https://forums.sdn.sap.com/click.jspa?searchID=7217830&messageID=3313524
Regards -
Does anyone know the screen exit for disabling MARC fields in transaction code MM01...
fIELDS TO BE DISABLED:
- ABCIN
- CCFIX
tHANKS IN ADVANCEHi,
Try with
Logistics - General -> Material Master -> Field Selection -> Maintain Field Selection for Data Screens
In this config screen, u can hide fields transaction code wise. Like i tried for MARA-MEINS in trx MM02, and check hide radio button and it works. You can try the same for MARC table fields.
Sumit -
Screen Exit for MM01 Material Creation
Hi,
The requirement is to add 2 new field in the Material Creation transaction (MM01) in the General Plant / Storage Location View.
I was trying to find the Screen exit in the MGA Package but there was no screen exit for material. So, i tried by SPRO- IMG, iam able to attach my designed screen and its viewable in MM01 but the data is not being updated in the relevant table for the custom fields (The custom fields are appended in the MARC table).
So, can you please help me about the coding part for the updation of the custom field data.
ThanxHi,
Check these:
MGA00001 - Material Master (Industry): Checks
and Enhancements
MGA00002 - Material Master (Industry): Number
Assignment
MGA00003 - Material Master (Industry and
Retail): Number Display
Check with 'BADI_MATERIAL_REF'
Refer
http://www.****************/Tutorials/ExitsBADIs/MM/MM01.htm
https://forums.sdn.sap.com/click.jspa?searchID=7217830&messageID=3313524
Regards
Kiran -
Hi All,
I have one requirement like I need to add one custom field in all views where the Plant-specific material status is available. i. e Views names are: Purchasing, MRP1, Work Scheduling, and Costing 1.
The location of the new custom field is below the section that contains the Plant-Specific material status field. in above Views.
Please help me to resolve this issue.
Thanks in Advance.
Amjad.Hi,
Adding customer fields to MM01 screens involves customising.
Go To SPRO>Logistics General->Configuring the Material Master.
Here you will find a step-by-step guide with an example in the documentation as to how to add field on a screen on the Material Master.
Regards,
Ankur Parab -
Screen exits in new ECC 6.00
Hello,
I know, How to do screen exits (say, for ME21 PO creation) in older systems, like 4.6c, 4.7b. But, I do not know How to create screen exits in new ECC 6.00 system, bcoz, I heard, its unlike older systems, there is SUBSCREEN concept in Enhancement frame work / new BADI? so, pls. let me know, How to do screen exits in new ECC 6..00 by using Enhancement / New BADI concept. I hv to add 3 fields at ITEM level in Purchase requisation transaction.
thank youHi ,
Please read the following Steps:
<< Cut and paste without attribution from http://www.scribd.com/doc/6729224/Implement-Screen-Exit-for-MM01-Adding-New-Fields-in-Screen removed, points unassigned and I gave up trying to get you over the 250 point mark for the year >>
Edited by: shambhu sharan pandey on Oct 29, 2009 5:31 AM
Edited by: Rob Burbank on Dec 18, 2009 5:38 PM
Edited by: Rob Burbank on Dec 18, 2009 5:42 PM -
Tcode: /SCWM/VEH --Finding screen exits/enhancements in eWM
Hello All,
I need to add a dropdown or F4 help button on a custom screen in transactoin /SCWM/VEH related to SCM eWM. I did not finf any screen exits for this transactoins. Please suggest is there any way in acheiving this?
Also can anybody explain how to achieve Batch to Batch transfer posting technically in eWM.
Please suggest me where can i found good tech document related to eWM.
Thanks In Advance.
Anil
Edited by: anil007 on Nov 11, 2009 10:13 AMHi,
Check these:
MGA00001 - Material Master (Industry): Checks
and Enhancements
MGA00002 - Material Master (Industry): Number
Assignment
MGA00003 - Material Master (Industry and
Retail): Number Display
Check with 'BADI_MATERIAL_REF'
Refer
http://www.****************/Tutorials/ExitsBADIs/MM/MM01.htm
https://forums.sdn.sap.com/click.jspa?searchID=7217830&messageID=3313524
Regards -
Register Function Code in Screen Exit
Dear ABAPers,
I always find difficulty when create button in screen exit. In all cases, the function code of the button need to be registered in certain table. For example when I create button in screen exit for Material Master MM01/02/03, I need to register the new function code in table V_T133E and V_T133D using SM30. I know where to register the function code that time since the error message point me where to register the function code.
Now I working on another screen exit and need to add button on the screen. They are enhancement QQMA0001for screen IW21/22/23. Right now I have no clue where to register function code and it keep showing error "Requested function ZBMIT is not available here". ZBMIT is new function code for new button I add in the screen.
Could anybody give advice to where should I register the function code. Moreover it's highly appreciate if there is any advice how I can find direction generally when I create button in screen exit.
Thanks
Regards
Hadi WijayaYou should declare the function code in the table T185 & T185F.
Use the transaction SM30 with the view table V_T185. You must only fill the first 2 radio buttons.
The program is the standard program is your in the case of an exit subscreen or the mailn program of the transcation.
Regards,
Christophe d'Argembeau -
Runtime error in MIRO while using User/Screen exit
Hello,
I have implemented an exit in ABAP for MIRO which when transported to Quality server through runtime error.
I have used EXIT (SMOD) : LFDCB001 which contains FM -> EXIT_SAPLFDCB_001 and include -> ZXM08U31. In this exit I have written my code to disable Inv. Party field. This field exist in Details Tab in Miro Transaction.
Location of the field: MIRO -> Details (tab) -> Inv. Party (Field)
Code written in include ZXM08U31 is:
LOOP AT SCREEN.
IF screen-name = 'INVFO-LIFRE'.
screen-input = 0.
MODIFY SCREEN.
ENDIF.
ENDLOOP.
This exit is assigned to a project in CMOD and I tested the same in Development system. It is working perfectly.
Now I transported the TR (Includes program ZXM08U31 and Customer enhancement projects ZMIRO). Now when I run MIRO in quality server it triggers the my logic and then through runtime error.
Runtime error says:
Short text
Dynpro does not exist
Error analysis
The system attempted to use dynpro 0400 in program "SAPLXM08".
This dynpro does not exist.
I agree that screen 400 does not exists in program for MIRO but it does not exists in development system as well. So if the runtime error is valid in QEC server then why not in DEV server. And when it can run successfully in DEV server why cant it run in QEC server.
Hope I have explained all the things in detail.
Please provide me the solution since user can bombard anytime for the MIRO dump everytime in QEC.
Regards,
Harjeet GroverHi Harjeet,
Reason of your Dump is that the enhancement "LFDCB001" which you used contains one Function module exit "EXIT_SAPLFDCB_001" and another one screen exit in calling screen "SAPLFDCB" number 0150.
So when you activate your project these above mentioned both components were activated.
So when you execute transaction SAP looks for called screen "SAPLXM08" No-0400 but as you havn't created and program go for DUMP.
Solution - Just Create called screen "SAPLXM08" No-0400 and activate.
Thanks,
Vijay -
hi seniors
can any one tell me abt screen exit n thier search.
pls hurry
points will be rewarded
offer valid for today only.
Sameerhi,
How to Find a Screen Exit in a Given SAP Standard T-code
Program
REPORT YSMOD2 .
TABLES: MODSAP, MODACT, TSTC.
PARAMETERS: INPUT1 LIKE TSTC-TCODE DEFAULT ' ',
INPUT2 LIKE MODSAP-TYP DEFAULT ' '.
DATA: SEARCH1(6),
SEARCH2(3),
SEARCH3 LIKE MODSAP-MEMBER.
DATA : FIRST_ROW VALUE 'Y'.
CONCATENATE: '%' INPUT1 '%' INTO SEARCH1,
'%' INPUT2 INTO SEARCH2.
SELECT * FROM TSTC WHERE TCODE LIKE SEARCH1.
FIRST_ROW = 'Y'.
CHECK TSTC-PGMNA NE SPACE.
CONCATENATE '%' TSTC-PGMNA '%' INTO SEARCH3.
SELECT * FROM MODSAP WHERE TYP LIKE SEARCH2
AND MEMBER LIKE SEARCH3.
SELECT SINGLE * FROM MODACT WHERE MEMBER = MODSAP-NAME.
IF FIRST_ROW EQ 'Y'.
WRITE: /0 TSTC-TCODE, 6 TSTC-PGMNA, 16 MODSAP-NAME, 32 MODSAP-TYP,
45 MODSAP-MEMBER, 70 MODACT-NAME.
FIRST_ROW = 'N'.
ELSE.
WRITE: /16 MODSAP-NAME, 32 MODSAP-TYP, 45 MODSAP-MEMBER, 70 MODACT-NAME.
ENDIF.
CLEAR : MODSAP, MODACT.
ENDSELECT.
IF SY-SUBRC NE 0.
WRITE : /0 TSTC-TCODE, 6 TSTC-PGMNA, 30 'No exits found'.
ENDIF.
CLEAR TSTC.
ENDSELECT.
END-OF-SELECTION.
CLEAR: SEARCH1, SEARCH2, SEARCH3.
Regards
Sudheer -
Creation of sales order- screen exit
Hi all,
I have a requirement like while creation of sales order need to develop one screen field in additional data B.i developed that field. and now while creation of sales order it will save in vbak table. now the problem is that screen field will be enable in that particular sales order type only otherwise it will be disable. how to do this. screen exit.Hi
See SAP Note 209278 - Display of customer-specific fields in sales doc
Check also, SAP Note 302497 - Additional cust. fields not displayed in 'Additional data B' and SAP Note 386694 - Additional data not displayed in screen 8459 and 8309
Regards
Eduardo -
Screen-exit for profit center creation - transaction KE51.
Hi All,
Background: The client has the requirement of importing profit centre master data from legacy system into SAP ECC system. Few of the legacy data could not be filled into existing sap fields, hence the requirement has been to populate the data into custom fields.
The client also has the requirement, that the same fields are required during online entry. For this we need to enhance the profit centre creation screen (transaction code KE51) with two additional custom fields.
Requirement: To enhance profit centre creation screen with custom fields. Screen-exit for KE51 transaction.
Pre-work: Program SAPLRKPM in SAP ECC system is the main program. It does not have any screen or sub screen area for custom fields addition. Debugged the program to check for screen-exits, found none.
Below user-exits are not either screen-exits or cannot be used for enhancing profit center screen.
PCA00001 EC-PCA: Document changes for data transfer
PCA00002 Profit Center Accounting: derivation of representative mat.
PCA00003 Derive Partner Profit Center for External Deliveries
PCA00004 Check valuation for invoice verification with transfer price
PCA00005 Check valuation for invoice verification with transfer price
PCASELEK EC-PCA: Selection criteria for data transfer
Solution required for: Could anyone please let me know if it is possible to enhance the profit center creation screen. If yes, please provide the names of the screen-exit/ badi exit.
(Just a thought, modifying the standard seems to be the only solution, this should be the last option and i agree, please provide your inputs.)
Thanks in advance.
Warm Regards,
Goutham.Thank you Manohar for the response.
The requirement is to display custom fields on standard sap screen and there are no screen-exits. So, i suppose the standard screen has to be modified.
Could you please provide brief explanation on
May be you should consider maintaining custom mapping table instead of going for chaning standard.
With Regards,
Goutham.
Maybe you are looking for
-
How can I create a flash picture slideshow for 3 images
Hi. I am wondering if anybody can tell me how to create a picture PUSH. I have three images that I wish to work with. By pushing I mean having an image come in from the left (or right) and place itself on top of the other (or pushing the other out of
-
Hi Guru, We have done the carry forward throught T-code : FAGLGVTR and F.07. But we forgot to close the assets fiscal year in AJAB and open fiscal year in AJRW. But now I am tring to do the AJAB and AJRW, here I want to know whether shall I do the A
-
Display XML Document from CLOB Column on page
Hi, I have been reading all the CLOB postings that I can find, but I still cannot get my page to do what I want. I have a very simjple table: MF_XML_DOCS (DOC_ID NUMBER, DOC_XML CLOB) I can populate this table OK but I am having problems getting the
-
FBL3N - Cost Centre authorisations
Hi, When running FBL3N all cost centres are picked. How do we restrict the user running this transaction from seeing certain cost centres but able to see others? Regards, Warren.
-
querterly e-return i am looking for a transation code for querterly e-return please suggest me for it