MM01 -- Update Was terminated while copying the material from one plant

Hi Experts,
While I am trying to copy the material from one plant like ETPE to another plant ETPZ , its telling that material created.
But when we try to display the created material in MM02 for plant ETPZ , it says that material does not exist.
Note : After creating the material , if we try to move any transaction code it shows the error message box and says that Update was terminated .
Kindly help us to resolve this.
Regards,
Vijay

Hi rob,
we have put the debugging , if there is any badi , enhancement the debugger would have gone to exit or enhancement line but its not going to any where.
and I have checked in sm13 ..
its giving the error like update was terminated
from funtion module : MATERIAL_UPDATE_DB
Report name : LGRAPU37
row : 360.
ABAP/4 processor: POSTING_ILLEGAL_STATEMENT
but if we go and see in the row 360 ...
CALL SCREEN 100 line only
is there , even if we put the breakpoint in this line , while we are debugging , debugger is not going to that line .
Note : if we see the screen 100 it shows the empty screen.

Similar Messages

Error message "update was terminated" while cancelling the billing documen

Hi Experts,
Kindly can you advise on the following issue. We are getting the error message "update was terminated" while cancelling the billing document using transaction code VF11.
Note: The accounting document associated with the billing document is not posted and also note that we have done a check with the Basis team who has confirmed back stating they are seeing the udpate error for the user " ". The log says that the update was terminated because the user was trying to enter some duplicate records into the database.
We could observe that the cancellation document is not created and also we have confirmed with the FI that they still continue to have the billing document open in the customer balance statementu2026
Thanks for your help,
Mithun

HI Mithun ,
Check if that billing document is there in VFX3 . If it is there then try to clear it from there and then try to reverse it.
Hopefully it will be done.
Regards,
Nikhil

Transfer the material from one plant(non valuated) to another plant valuat

Hi All,
How to transfer the material from one plant(non valuated) to another plant valuated.
Which Goods Movement type we required to use.
Regards,
Amit Shah

Hello,
Please refer the link below. hope it could be a help.
stock transfer plant to plant
split valuation
Regards,
Jana

Error :Display document : Update was terminated.While displaying the PO

Hi All,
I am creating a PO with respect to contract in SAP 4.6C system using ME21.PO is getting created successfully.But when I want to display the same in ME23 it giving me a message 'Display document : Update was terminated'.( an express message is getting generated to view in SBWP transaction code ).
I went through some of SDN forums and checked the tcode SM13 to resolve the issue .I found that there is no ABAP dump got generated for the same .
Please help me to resolve the issue ..
Regards,
Praveen GB.

Hi Lakshman.
I did that, systesm is showing below error :
1 ME_CREATE_DOCUMENT V1 NORMAL Err
when click on that ,I got one more window with an option to check ABAP dump,But there is no ABAP dump exists for the same.
I cheked in ST22 also there is no DUMP available for the above issue.
Please let me know how to crack this issue.
Regards.,
Praveen GB

Express Document:Update was terminated while processing the Order via VA02.

Hi,
User was trying to process order for orderlines say for Eg POSNR 20 to 400 for a particular order,He ended up with Express document :Update was terminated error.When i Checked in SM13 for the update termination errors,I got the following error.
VI: 200 Item status (document &, item &) is missing.
I checked the order (POSNR 20 to 400 ) in VBUP table and the entries were missing for this order (Posnr 20 to 400 ).
Appreciate you'r Inputs.
Thanks
Rakesh.

Hi,
Can you please send the detail message in express document.
Apps

Update was terminated while creating purchase order from ME21N

Hi Experts,
We are getting this dump when try to create purchase order from ME21N;
Our system ECC 6.0 and IS-AFS (Apparel & Footwear Solution) V600 component has installed,
How can we prevent this error,
Regards
Here is the dump and sm21 log,
Runtime Errors         LOAD_PROGRAM_NOT_FOUND
Exception              CX_SY_PROGRAM_NOT_FOUND
Date and Time          10.10.2008 10:22:03
Short text
     Program "RMCMS431 " not found.
What happened?
     There are several possibilities:
     Error in the ABAP Application Program
     The current ABAP program "SAPLMCS4" had to be terminated because it has
     come across a statement that unfortunately cannot be executed.
     or
     Error in the SAP kernel.
     The current ABAP "SAPLMCS4" program had to be terminated because the
     ABAP processor detected an internal system error.
What can you do?
     Note down which actions and inputs caused the error.
     To process the problem further, contact you SAP system
     administrator.
    Using Transaction ST22 for ABAP Dump Analysis, you can look
    at and manage termination messages, and you can also
    keep them for a long time.
Error analysis
    An exception occurred that is explained in detail below.
    The exception, which is assigned to class 'CX_SY_PROGRAM_NOT_FOUND', was not
     caught in
    procedure "TMC2F_FROUT_CALL" "(FORM)", nor was it propagated by a RAISING
     clause.
    Since the caller of the procedure could not have anticipated that the
    exception would occur, the current program is terminated.
    The reason for the exception is:
    On account of a branch in the program
    (CALL FUNCTION/DIALOG, external PERFORM, SUBMIT)
    or a transaction call, another ABAP/4 program
    is to be loaded, namely "RMCMS431 ".
    However, program "RMCMS431 " does not exist in the library.
    Possible reasons:
    a) Wrong program name specified in an external PERFORM or
       SUBMIT or, when defining a new transaction, a new
       dialog module or a new function module.
    b) Transport error
How to correct the error
    Check the last transports to the R/3 System.
    Are changes currently being made to the program "SAPLMCS4"?
    Has the correct program been entered in table TSTC for Transaction "ME21N "?
    If the error occures in a non-modified SAP program, you may be able to
    find an interim solution in an SAP Note.
    If you have access to SAP Notes, carry out a search with the following
    keywords:
    "LOAD_PROGRAM_NOT_FOUND" "CX_SY_PROGRAM_NOT_FOUND"
    "SAPLMCS4" or "LMCS4F10"
    "TMC2F_FROUT_CALL"
    If you cannot solve the problem yourself and want to send an error
    notification to SAP, include the following information:
    1. The description of the current problem (short dump)
       To save the description, choose "System->List->Save->Local File
    (Unconverted)".
    2. Corresponding system log
       Display the system log by calling transaction SM21.
       Restrict the time interval to 10 minutes before and five minutes
    after the short dump. Then choose "System->List->Save->Local File
    (Unconverted)".
    3. If the problem occurs in a problem of your own or a modified SAP
    program: The source code of the program
       In the editor, choose "Utilities->More
    Utilities->Upload/Download->Download".
    4. Details about the conditions under which the error occurred or which
    actions and input led to the error.
    The exception must either be prevented, caught within proedure
    "TMC2F_FROUT_CALL" "(FORM)", or its possible occurrence must be declared in the
    RAISING clause of the procedure.
    To prevent the exception, note the following:
sm21 log ;
Transaction Canceled 00 671 ( LOAD_PROGRAM_NOT_FOUND 20081010102203saptest_TET_00 EYUCE 100
Update terminated
> Update key: F39796DD5421F1509233001E0BD601E0
> Update module: MCE_STATISTICS_UPD_V2
Run-time error "LOAD_PROGRAM_NOT_FOUND" occurred

Please follow the oss note 800335
V2 Update terminations in Purchasing transactions after upgrading or installing AFS 5.0 release.
Other terms
AFS, LIS, MIGO, ME22N, OLI3, S433, S431
Reason and Prerequisites
AFS Purchasing infostructure S431 is no longer used. S433 is the valid infostructure for the release AFS 5.0.
Solution
Please do the following.
For customers upgrading to AFS 5.0 only:
> Rebuild Infostructure S433.
- Goto transaction: OLI3 (Statistical Set up of Infostructures)
- Info structure to be compile: S433
- Specify the 'Name of run'.
- Execute.
> Please also follow the instructions given below.
For both Upgrade and Non-upgrade Customers:
> Create the report 'ZDELS431'.
- Transaction: SE38
- Give Program name as ZDELS431.
- Create (F5).
- Title : 'Program to delete S431'.
- Type : 1 (Executable Program).
- Status: T (Test Program).
> Copy the program text from the note and paste in the program.
> Save and activate the program.
> Execute the report for all clients in Update mode.
(Two check-boxes will appear: P_ALL_CL, P_UPDATE.
   Please check both of them).
This report will delete all the references to infostructure S431.

Movement of material from one plant to other within the same country

Hello,
I would like to move material from one plant to other via tran MB1B.
The system generates the following error while trying to save document :
Account determination for entry BAS1 BSX 9000 ___ C100 not possible
The system did not find an account for this transaction. This means that the account determination for key BAS1 BSX 9000 ___ C100 is not maintained in MM Customizing (Valuation). The key is made up of:
Chart of account
Transaction key (= Posting transaction)
Valuation grouping code
Account grouping code
Valuation class
System Response
The system cannot update a G/L account for this transaction. You cannot post the transaction.
Can you please tell me where the necessary setting should be made.
Thanks

Hi
Please check the confirguration in OBYC for this combination and assign GL account for this combination of Valuation class, Valuation area.
Regards,
Lakshmanan Krishnan

How do I copy the style from one control to another?

I need to programmatically copy the style from one graph to another. I'm currently using the importstyle and export style functions but I'd like to avoid that since: 1) I'm creating >100 of the same graphs in a scrolling window and execution time is a concern, and 2) it makes it harder to redistribute the application, and 3) you shouldn't have to import/export from disk just to copy a graph style.
I noticed the copy constructor was disabled so you can't just create a new one from the original. I suppose I could iterate through all the styles and transfer them from the master graph to all the copies but is there an easier way to do that? If not, is there some sample code for that?
I'm using MStudio 7.0 for C
++.
Thanks,
-Bob

One way that you could do this would be to create a helper method that configures your graph rather than configuring it at design-time, then use that helper method to apply the settings to the new graphs that you create. However, this would only work if you wanted all graphs to be configured exactly the same way - this would not work if the settings of your master graph are changing at run-time and you want the new graphs to be configured with the current settings of the master graph.
Another approach is to query each control for IPersistPropertyBag, create an IPropertyBag, pass the IPropertyBag to the master graph's IPersistPropertyBag:ave, then pass the IPropertyBag to the new graph's IPersistPropertyBag::Load implementation. I'm not aware of any implementations of IPropertyBag that are readily available for use in applications, so the tricky part is creating the IPropertyBag. Below is a very simple implementation of IPropertyBag that should be enough to get the job done for this example. First, add this to your stdafx.h:
#include <atlbase.h>
CComModule _Module;
#include <atlcom.h>
#include <atlcoll.h>
Here's the simple IPropertyBag implementation:
class ATL_NO_VTABLE CSimplePropertyBag :
public CComObjectRootEx<CComSingleThreadModel>,
public IPropertyBag
private:
CAtlMap<CComBSTR, CComVariant> m_propertyMap;
public:
BEGIN_COM_MAP(CSimplePropertyBag)
COM_INTERFACE_ENTRY(IPropertyBag)
END_COM_MAP()
STDMETHODIMP Read(LPCOLESTR pszPropName, VARIANT* pVar, IErrorLog* pErrorLog)
HRESULT hr = E_FAIL;
if ((pszPropName == NULL) || (pVar == NULL))
hr = E_POINTER;
else
if (SUCCEEDED(::VariantClear(pVar)))
CComBSTR key = pszPropName;
CComVariant value;
if (!m_propertyMap.Lookup(key, value))
hr = E_INVALIDARG;
else
if (SUCCEEDED(::VariantCopy(pVar, &value)))
hr = S_OK;
return hr;
STDMETHODIMP Write(LPCOLESTR pszPropName, VARIANT* pVar)
HRESULT hr = E_FAIL;
if ((pszPropName == NULL) || (pVar == NULL))
hr = E_POINTER;
else
m_propertyMap.SetAt(pszPropName, *pVar);
hr = S_OK;
return hr;
Once you have a way to create an implementation of IPropertyBag, you can use IPropertyBag and IPersistPropertyBag to copy the settings from one control to another like this:
void CopyGraphStyle(CNiGraph& source, CNiGraph& target)
LPUNKNOWN pSourceUnknown = source.GetControlUnknown();
LPUNKNOWN pTargetUnknown = target.GetControlUnknown();
if ((pSourceUnknown != NULL) && (pTargetUnknown != NULL))
CComQIPtr<IPersistPropertyBag> pSourcePersist(pSourceUnknown);
CComQIPtr<IPersistPropertyBag> pTargetPersist(pTargetUnknown);
if ((pSourcePersist != NULL) && (pTargetPersist != NULL))
CComObject<CSimplePropertyBag>* pPropertyBag = 0;
CComObject<CSimplePropertyBag>::CreateInstance(&pPropertyBag);
if (pPropertyBag != NULL)
CComQIPtr<IPropertyBag> spPropertyBag(pPropertyBag);
if (spPropertyBag != NULL)
if (SUCCEEDED(pSourcePersist->Save(spPropertyBag, FALSE, TRUE)))
pTargetPersist->Load(spPropertyBag, NULL);
(Note that "CreateInstan ce" above should be CreateInstance - a space gets added for some unknown reason after I click Submit.)
Then you can use this CopyGraphStyle method to copy the settings of the master graph to the new graph. Hope this helps.
- Elton

Needed to copy the share from one server to share in another server

Hi ,
Needed to copy the data from one share named as xyz in the server 1 to the another share abc in another server 2.
Share xyz data should be copied to the share abc which has already different data in it .We need to copy all the data from the share xyz to the share abc without deleting any existing data in the destination share.
I know that /MIR option will replace the destination same as source
Can anybody help us in the Robocopy command & switches for this activity?
Any help is greatly appreciated!
Thanks & Regards S.Swaminathan Live & let others live!!!

Hi Mandy,
Thanks for your reply.
I have done many robocopy for the share movements from the one server joined in a domain to another server joined in the same domain.In that instances, the destination server will not be having any share of the old server name and just I robocopy the share
from the old server to the new server after creating a new share .The usual command is as follows:
"\\server1\oldshare" \\server2\newshare" *.* *.* *.* /ZB /E /COPY:DATO /XJ /R:0 /W:0 /TEE /dcopy:T /NP /log:c:\robocopy.txt
And after the copy , during the cutover of the standalone DFS pointing to the new share , the domain users in the corresponding access groups (name of the groups based on the old server name) of Full,Modify,Read will be appropriately copied to the respective
new groups (name of the groups based on the new server name) of the new share and the access is ensured by the users.
But in this case , the destination server is already having a share with existing data in it and to be added with the old share data
My question is shall I use the same command as before by copying all the data to the newly created subfolder inside the existiing destination share through the following command
"\\server1\oldshare" \\server2\newshare\new sub-folder" *.* *.* *.* /ZB /E /COPY:DATO /XJ /R:0 /W:0 /TEE /dcopy:T /NP /log:c:\robocopy.txt
You have already mentioned /E without purge options will do.
Just asking one more time for the safer side
Thanks & Regards S.Swaminathan Live & let others live!!!

How to copy the data from one database to another database without DB link

Good Day,
I want to copy the data from one database to another database with out DB link but the structure is same in both.
Thanks
Nihar

You could use SQL*Plus' COPY command
http://technology.amis.nl/blog/432/little-gold-nugget-sqlplus-copy-command
http://download.oracle.com/docs/cd/B19306_01/server.102/b14357/apb.htm#sthref3702
Edited by: Alex Nuijten on Sep 16, 2009 8:13 AM

How to Copy the PLD from one database to another

Dear Members,
i have designed the PLD for Purchase Order, i want to copy the particular PLD into another Database.
i tried to copy the PLD from one database to another through copy express.. i copied the PLD sucessfully. But the problem is,it copies all PLD's from one database to another. i want only the Purchaseorder PLD has to be copied in to another database.any body can help me in this regard.
With Regards,
G.shankar Ganesh

Hi,
select * into A1 from RDOC where Author !='System'
select * into A2 from RITM where Doccode in (select Doccode from A1 )
select * from A1
select * from A2
sp_generate_inserts 'A1'
sp_generate_inserts 'A2'
you will get Insert scripts of A1 and A2 tables .After that You 'll Replace A1 to RDOC and A2 to RITM.
So that you can RUN this SQL srcipts any where (In any Database)
but First u have to run sp_generate_inserts Storeprocedure(from websites) .
drop table A1,A2

How to Move or Copy the Tables from One Database to Another Database ?

HI,
Can any one help me on this, How i can move or copy the tables from one database to another database in SQL server 2005 by using SQL query. Hope can anyone provide me the useful and valuable response.
Thanks
Gopi

Hello,
Maybe these links help you out
http://www.microsoft.com/downloads/en/details.aspx?familyid=56E5B1C5-BF17-42E0-A410-371A838E570A&displaylang=en
http://www.suite101.com/content/how-to-copy-a-sql-database-a193532
Also, you can just detach the database make a copy and move it to the new server.

'update was terminated' while creating billing document VF01

Hi all,
i need a solution urgently ..except for paticular document no all documents that i post using VF01 create successfully document no.
but for a paticular document no(may be it is of some type that i am unable to) while creaing billing document no it gives a message 'document created successfully' ,but when i try to click any button after that e.g BACK it shows a messge 'Update was terminated for author ....' in my inbox. and vf03 shows the documentdoesn't exist.
in st22 i checked one dump . when i gave a break point at that point the cursor never reached the code.
I also checked SM13 and it showed all fms as init. and one fm 'RV_MESSAGE_UPDATE ' as error . i aws unable find the fm in the main program .
one more thing when i create bill document for other document type it shows messge 'Document saved ....(no accounting document created)' but for this one i am getting messge 'document saved.......' .
I asked one collegue he told me might be some OSS notes required for it . i am working on a unicoded system ECC 6.0 version.but he is not sure .
Has any body faced the same problem..and what was the soln....if oss notes are required than how could i find it..and what was the no...........
THANKS IN ADVANCE ...................

THANKS for the reply.
i am new to sap .can u tell me in detail where actually i can check for number range of the document . one more when i checked the sm13 and started debugging it gave me for a certain character set (may be in chineses) present in the table ,the transfer command gives a dump. now the problem is it is too long 132 and don't no forwhich character it gives an dump.how can i check the characters maintained in the system. it gives a dump CX_SY_CONVERSION_CODEPAGE ,At the conversion of a text from codepage '4102' to codepage '4110':
i am not sure this causes the mesages 'Updation was terminated' . what u people think.
thanks ..

Workflow Message - "Update Was Terminated" while MIRO

Hi Experts,
Please help me in the following -
Requirement : Whenever Invoice (by MIRO) is blocked either due to Price or Amount, a mail should be triggered to a user in his SAP Inbox.
Approach : Business Object used - BUS2081.
                 Events - blockedPrice & blockedQuant.
Problem : While blocking/posting Invoice, a mail(Express Message) is coming to SAP Inbox saying " Update Was Terminated" - Error Info...   M8 185: Invoice document 801000000.
Please suggest.
Regards
Sonal..

Hi,
I'm using Standard Task "Send Mail" to send the mail.
Here is the output of SM13 , look at the 15th row & advice..
User:   EI6DEV   Client:   800   Transaction:   MIRO
Date:   19.08.2008   Time:   11:48:32   Report:   SAPLMR1M
Update key:   ADB56DDD9D18F119ABBF0002A5CD3FB0     Status:   Error
1     CKML_F_POST_INDEX     V1 (no retry)     Initial
2     POST_DOCUMENT     V1     Initial
3     G_FI_POSTING     V1     Initial
4     BREAKDOWN_RELATION_INSERT     V1     Initial
5     G_GLDB_POSTING_A     V1     Initial
6     G_GLDB_POSTING_3     V1     Initial
7     FAGL_SPLINFO_UPDATE     V1     Initial
8     AC_DOCUMENT_MM_UPDATE     V2     Initial
9     MCE_STATISTICS_UPD_V1     V1     Initial
10     MCE_STATISTICS_UPD_V2     V2     Initial
11     ME_UPDATE_INVOICE     V1 (no retry)     Initial
12     /SAPTRX/APPLOG_UPDATE_DB     V1 (no retry)     Initial
13     MRM_BW_POST_SHADOW     V1     Initial
14     MCEX_UPDATE_06_V1     V1     Initial
15     MRM_INVOICE_DOCUMENT_POST     V1     Error
16     SD_SCD_IV_SELCRITERIA_SAVE_DB     V1     Initial
17     SWE_EVENT_CREATE_IN_UPD_TASK     V1     Initial
Regards
Sonal

Error 'Update Was Terminated' - While clearing an open item

Hi,
We are facing a problem where we receive an error - "Update Was Terminated" when we try to clear some entries for 3-4 vendors (posted in period 12 of year 2006. it happens only for those 3-4 vendors). We have identified the problem as follows:
1) We ran program SAPF190 and found that there is a defference in the 'debit balance' and Total of line items' for these vendors. I ran program SAPF71 (in Quality server) which rectified some entries. However, some entries still remain incorrect and these entries that still remain incorrect are ones - "which have a posting date of 10 oct 2006, but the posting period picked up by the document header is period 12, instead of period 7". Now, some other documents posted for the same vendor on the same date have picked up the correct posting period i.e. 7. I am really baffled at how this actually happened and howcome the system allowed it??
2) After running program SAPF190, there were some entries that got corrected (these entries were just not captured by the system in the balance field, and did not have the same problem as the entries mentioned above where the wrong posting period was picked by the system). When i tried to clear the line items for the vendors whose entries had been rectified, it still gve the update error. When i checked the number range status, i noticed something very odd:
"The number range status shows a number much higher than what the system is automatically picking for the documents (e.g system picks 230 as the document number when posting, but the number range staus in FBN1 shows current number as 256). Also, once 256 is reached (i posted 26 documents for it) and we post the 257th document, the error remains and the status number now moves up 100 places to 356). At this time if i post another document it picks the number 258 instead of 356...and if i keep posting documents till 356 is reached, im sure when i post the 357th document, the status will jump to 456)
Can someone please help me here!! I dont understand how and why this is happening!!
Thanks!!
Regards,
Angad

>
Ravi Sankar Venna wrote:
> Hello,
>
> Please let me know the ERROR name you are getting and what is the transaction code you are using to clear. (F.13 or F-44)
>
> Try to analyze the dump in ST22.
>
> Regards,
>
> Ravi
Hi,
The error is "Update was terminated" . It sends this message to my inbox!! After searching a bit i found about the two reports - SAPF190 and SAPF071. After running them i found some balance mis-match. I ran the two programs and it rectified those mis-matched entries!! However, even after that, it is giving me the same "update was terminated" error. We are using F-44 for clearing.
This error is coming only for those entries which we had posted using a user-exit. Basiaclly these are entries for late payment which were programmed to be posted directly at the time of invoicing. I just checked the code of the exit, and these entries were (astonishingly) made directly into the BKPF and BSEG tables (infact the posting period was hard-coded to '12', which is why even when my posting date for these documents is 10.10.2006, it still enters posting period '12' in the header instead of '7'.). Therefore, there were balance mis-match when we saw the monthly balance in FK10N and compared it with the line items total for that month. However, on running report SAPF071, it corrected those entries, but the update error problem still persists!!
The exact error:
Update was terminated
System ID....   QAS
Client.......   100
User.....   MOHGYA323233
Transaction..   FB1K
Update key...   4A206A2D00E5001202000000C0A80A35
Generated....   04.06.2009, 11:24:59
Completed....   04.06.2009, 11:24:59
Error info...   F1 805: Clearing: Line item 001

MM01 -- Update Was terminated while copying the material from one plant

Similar Messages

Maybe you are looking for