MM50 Extend Mtrl costing view, but after maintaining costing view in OMS2.

Hello Sap Gurus,
I have a Unique Issue, i have created few 1000s Materials with material type ZDEN, now initially while creating these materials the costing View was not selected in the Material Type,
but after creating this 1000s of material under ZDEN material type, now we require Costing View to be maintained for this material which are already created,
so as an option we went to the material type ZDEN in OMS2 and extended the costing Views for the material type,
now if i go to MM50 to extend material costing views I'm not able to extend the costing view for the materials, it gives me an error no materials selected,
but alternately if i try extending the costing  views individually for each material by MM01 transaction it allows me to extend costing views to the material selected,
is there any bug or issue note to be applied or any solution for this mass extension of views in material master, any bapi to extend Materials of this scenario,
Awaiting your reply,
Thanks and regards
S Kumar

when you create a material master after initial customizing of OMS2 then SAP writes the possible views into table MOFF
If you then do customizing in OMS2 and add the costing view, this is not updated for  all your exsting materials 
Hence you dont get them via MM50 because it selects the materials based on entries in MOFF,  but you can extend with MM01 as SAP checks the current customizing.
execute transaction OMSM which can rebuilt the table and see if you then get your materials in MM50

Similar Messages

  • I have tried to format my HDD from MS-DOS fat to MAC OS Extended (jurnaled) but after formating turns to the same MS-DOS FAT format why?

    I have tried to format my HDD from MS-DOS fat to MAC OS Extended via disk utility but after formating turns to the same MS-DOS FAT format why?my current OS is 10.5

    You will need to perform an Internet Recovery or be able to boot the computer using a Snow Leopard 10.6.3 or later DVD. For the former:
    Restart the computer and at the chime press and hold down the COMMAND-OPTION-R keys until you see a globe appear in the gray startup screen. This may take a little while so be patient. You need to have an internet connection for this to work - preferably using Ethernet.
    After a fairly long period of time - 15 minutes or more - the recovery screen will appear. Select Disk Utility from the main menu, and click on the Continue button.
    1. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
    2. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed.
    3. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
    4. Set the format type to Mac OS Extended (Journaled.) Click on the Security button, check the button for Zero Data and click on OK to return to the Erase window.
    5. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
    6. After formatting is done quit DU and return to the main menu. Select Install OS X from the main menu and click on the Continue button. Follow the onscreen instructions to install OS X onto the internal drive.

  • How to extend the costing view for a material

    How to extend the costing view for a material

    Use MM01 Trxn code and Select Material and Select Costing Views and Maintain, Save it.
    Else Use MM50 and Select Material and Mainenance Status as G Costing and Execute, Maintain & Save.

  • Ios 5 Update New Features says that iCal now has a week view for iPhone but after updating last weekend, I don't see any week view--just List, Day and Month..How do I get the week view?

    ios 5 Update New Features says that calendar now has a week view but after updating my iPhone 4 last weekend, I don't see any week view for iCal--just List, Day and Month as in the past. Is the weekly view available for iCal and if so, how do I access it?

    Rotate your phone to landscape.

  • I use to be able to rotate my iPhone and change the view of an image, Web page, email, and so on, from portrait to landscape, but after update, I cannot. I can only view in portrait mode. Anybody know what's up with that?

    I use to be able to rotate my iPhone and change the view of an image, Web page, email, and so on, from portrait to landscape, but after update, I cannot. I can only view in portrait mode. Anybody know what’s up with that?

    You need to do the basic troubleshooting steps described in the User Guide, Appendix B.
    Restart phone
    Reset phone
    Restore in iTunes using a backup
    Restore in iTunes as new, without using a backup
    If restoring as new doesn't help, there is a hardware failure in the phone that needs evaluation by Apple.

  • Extending the sales view...

    Hi,
    I am creating a material using MM01 TC (for 5 views--Basic data1,2, purchasing, Accounting1,2) and extending the same material to diff plant and storage location using Zprogram(dialog programming) and also creating two more view additionaly (sales view and MRP view). Here we are submitting the values as file through the material master std input program for extending the material as well as creating two additional views for that material..
    But after executing, I am getting the error as " You are not fully maintained the tax classification". So the material is not getting created.
    I am passing the values for tax classification TAXM1 ...values in both the structures BMMH1, BMMH2.
    Also in the header structure BMM00 -- I am passing the indicator as 'X' for the sales view and MRP view .
    Is I am missing any fields? Why I am not able to extend the material?
    Regards,
    Justin.

    Hi,
    Generally same valuation class is used in all the vauation areas because the material grouping and categorization is done at company level.So while extending the material you can extend with the same valuation class.
    And while extending the sales views you have to take confirmation from the sales department about the values in the sales views.Here also you need not worry about the GL accounts at the time of extending the materials.The revenue posting assignments will be taken care by sales consultant.
      The automatic account determination is carried out depending on your configuration.
    We can configure automatic postings in the following ways:
    1.Direct posting to GL account.
    2.Valuation class and GL account.
    3.Valuation grouping code,valuation class and GL accounts.
    Depending on the configuration (in your case 3rd) system will check the valuation grouping code then valuation class then GL account.
    Regards,
    Rambhupal reddy

  • Measure not shown in AWM after maintain

    Hi
    I am using the latest AWM (10.2.0.1.0), after maintaining one of my cube successfully, I tried to view the cube content but it only showed blank in the measure field (there is no error message when viewing the cube). This problem does not occur for my other cube which do not comprise of that many dimensions.
    Would like to know if anyone experienced the same problem.
    Thanks you.

    I'm facing the same issue. Maintained the cube without any errors. But when i click view data there is no data. any clues??

  • Just got a new imac and my iwork software wont work. I have the serial numbers but after migrating from my old mac running OSX tiger it won't even give me that opportunity. I do not have any discs as this was downloaded. Help

    Just got a new imac and my iwork software wont work. I have the serial numbers but after migrating from my old mac running OSX tiger it won't even give me that opportunity. I do not have any discs as this was downloaded. Help

    Hi, hopefully you guys can help me out, I just
    purchased a G5 iMac to replace my aging dell desktop,
    and now i'm more or less completely os x dependant
    (I've had an ibook for a few months now). Anyway, I
    have a few questions:
    1. Does anyone know of a (free) mail notifier tool,
    that will alert me when I recieve new pop3 mail? I
    used to use AIM for this in windows
    The built in email program does sound an alert for new messages.
    2. Anyone know of a good (free, again) IRC client?
    iChat works well.
    3. I noticed earlier that my screen was flickering,
    it seems to have subsided for now, but is that normal
    to encounter in a new display? It wasn't really bad
    flicker, but I could see it.
    No idea.
    4. I leave my desktops on 24/7x365, will that be a
    problem with this iMac? Display shuts off of course
    after 30 mins
    You could set the iMac to go to sleep after non use. My Macs are
    always sleeping when not in use, waking them up takes seconds.
    Unlike windoze, never knew if it would be locked up or not.
    5. Should I get the extended warranty? I'm usually
    against them, but I am expecting this computer to
    last me at least 3 years (for $1300 it better!)
    before I upgrade, as I got that much out of a Dell
    and from what I understand, Mac's do not age nearly
    as fast as Windows pc's.
    It is well worth the cost. Never know what might happen. Also
    it is good insurance for future upgrades. I traded in my G4 tower
    purchased two years ago for 75% of what I paid for it. Apple care
    transfers, giving the buyer the remainder of your warranty.
    Thank you for any help,
    -Evan

  • Extended display does not work after downgradin​g to XP

    Hi
    I have downgraded from VISTA to XP
    Before the downgrade extended display (19 LCD connected via docking) it was working OK
    after the upgrade, it stopped working
    I installed the latest video drivers from the LENOVO website, and tried playing with the FN+F7 but no luck.
    It seems that there is some communication with the screen, as the screen looks as if it is working, but the entire screen is black!
    when i look in the screen properties, it seems as if the extended screen is working, but again the screen is black.
    any ideas?
    thanks
    Guy

    which machine and what model of machine are we talking about here?? X60, X61??
    Regards,
    Jin Li
    May this year, be the year of 'DO'!
    I am a volunteer, and not a paid staff of Lenovo or Microsoft

  • When I start up my new Imac with my password, it works but after going into sleepmode, I can't go out of the sleep moed with this password

    I did the configuration of my new Imac and entered and confirmed my password when asked.
    When my computer is switched of, I can startup with this password but after going into sleepmode, this password doesn't work.
    The same when I go to "system preferences" users & groups, it's not possible to unlock the lock with this password
    I'm sure that I never used another password.

    If Apple was the one that replaced the ribbon cable, return it. If not, run AHT (Apple Hardware Test).
    Using Apple Hardware Test to troubleshoot a hardware problem
    Your issues might be caused by a hardware problem. Running Apple Hardware Test can help you solve this problem by showing you the faulty hardware.
    Shut down the computer by going to Apple () > Shut Down…
    Select Shut Down or allow the computer to shut down automatically.
    Plug in the MagSafe power adapter into a power source and then connect it to your Mac if you have not already done so.
    Press the Power Button to turn on the computer.
    Press and hold the D key on the keyboard before the grey starting screen appears.
    Continue to hold the D key until the loading screen shows up. You should see a globe.
    When AHT has loaded, select your Language and then press the Return (↩) key.
    Select the Perform Extended Testing checkbox located under the Test button.
    Press the T key, select the Test button, or press the Return (↩) key to start running the diagnostics.
    Report any issues it shows in a reply.
    I hope I helped.

  • HT5628 After running bootcamp, DVD drive is detected by Windows 8. But after installing drivers, no longer can detect. Device Manager shows that DVD drive is unplugged! Drivers in Bootcamp "removed" the DVD drive!

    After running bootcamp, DVD drive is detected by Windows 8. But after installing drivers, no longer can detect. Device Manager shows that DVD drive is unplugged! Drivers in Bootcamp “removed” the DVD drive. I think there is an issue because I reinstalled Windows 8. If I don't install driver, then I have reduced functionality (no Apple keyboard, no sound etc), but once I install driver, I lose my DVD drive.

    Hi, guys, I have had the exact same problem since the summer of 2010. Here's what I was able to find out.
    Deleting upper/lower filters, running all those Fix Ya programs and other Microsoft crap is useless. This problem is most certainly has nothing to do with registry of any software on your computer. I took my HP 9620us to a couple of repair places and, they tried a lot of things and it appears that the root of this problem is a faulty motherboard connection. Of course, it costs about 400 bucks to fix it so I'm not sure I want to pay this kind of money.
    Anyway, if somebody was able to fix it PLEASE post here to let us know. Again I am 99 per cent sure it's some piece of hardware in the motherboard.

  • I have a Mac computer and am trying to use a Photoshop CS4 program, but after accessing my desktop files through Adobe Bridge and clicking twice on any of the pictures to get into Photoshop,  instead of entering photoshop I get an enlarged version of the

    I have a Mac computer and am trying to use a Photoshop CS4 program, but after accessing my desktop files through Adobe Bridge and clicking twice on any of the pictures to get into Photoshop, instead of entering photoshop, I get on the lefthand side an enlarged version of the picture with red, yellow and green buttons on top. Any suggestions on what is wrong, or what can be corrected ?

    And there is the problem. Your pictures are opening up in Mac's own Preview app.
    Do you want all your jpegs to open in Photoshop, or only when you are in Bridge?
    Selecting a program to open a certain file is called: File Type Association.
    You can choose this at the MacOS level or the Bridge level.
    Here's how to do both:
    Either MacOS or Bridge has the wrong app associated with the jpeg. Let's start with MacOS
    Close Bridge and Preview. Select one of your jpegs, and press Cmd i, That will bring up the file info window.
    Go down to the "Open with" section of File Info.
    Choose Photoshop CS4 and click on the Change All... button to apply this choice to every jpeg on your Mac.
    Then open Bridge and see if double-clicking opens it in Photoshop.
    Now that means all jpegs on your Mac will open in Photoshop.  Maybe you don't want that.
    You can set your jpegs to open in Preview when Bridge is closed.
    When you open Bridge, there is Preferences > File Type Associations where you can direct Bridge to open the jpegs in Photoshop when you are viewing in Bridge.

  • Use... I realized that i spent my 27 years for using (fixing) computers. Because the Mac was perfect. After iMac, i was really fine with my computer... But after something, that doesn't bother me, happened. The screen started to get cloudy and black... An

    Hi...
    My name is Turgay and have been using computer since 1982... 2 years ago, because of my friend's advice, i bought an iMac... It was the first Mac that i use... Till that, i was using normal PC's...
    I bought an 24" iMac on July 2009 and started to use... I realized that i spent my 27 years for using (fixing) computers. Because the Mac was perfect. After iMac, i was really fine with my computer... But after something, that doesn't bother me, happened. The screen started to get cloudy and black... And it increased. Because of this i took my iMac to your authorised distributor http://www.bilkom.com.tr...
    They changed my screen but in 2 months it happened 3 times and i wanted them to change my iMac with new one, under customer laws... In our country, the device must be changed with new one if the same problem occurs in 3 months. Because i know the customer satisfaction of Apple, i didn' worry about it but Bilkom refused my will... I spoke with them for 2 months but nothing happened, they just told me, it' not our problem.
    Because of this speech, i sued them on June 2011... Last week, i won the case but just for the return of invoince... It costs 3.200 Turkish Liras (1.800$) and there's no 24" iMac unused... Bilkom again refused to give me an iMac... I thought that Apple's customer satisfaction can't be like this... I didn't write anything to Apple till now but if i can't get an iMac, i must return to normal PC after 2 years... And i don't want that... I offered an iMac 27" with core i7... No matter Bilkom accepts or not, they don't care of me... I'm a customer, they should do... I've never seen such a like company. I hope the real Apple will help my problem and save me from Bilkom...
    Waiting for your reply... Thanks and regards...
    Turgay Kala
    General Manager

    Unfortunately, you are not communicating with Apple here - we are all other users volunteering our time to help with technical problems.
    Here is a list of Apple contacts; there is no email address  - you will need to write a letter to their corporate headquarters or call them:
    http://www.apple.com/contact/
    Although, it appears that your problem is with a third party store and that you have won in court - did you get your money back? 24" iMacs have not been made since 2009 or 2010. Now there are 21" and 27" iMacs.

  • Error on extend an internal table, but the required space was not available

    Hi All,
    I am trying to retrieve cost data from COVP tables, as well as the quantity, cost centre, and price unit fields from MSEG / BSEG tables. Thing is, if the AWTYP value in COVP table = 'MKPF', i have to get the data from MSEG, otherwise, I need to get it from BSEG table.
    I kept getting this error message:
    <i>You attempted to extend an internal table, but the required space was not available.</i>
    Anyone have any idea how to make my codes more efficient?
    Please help. Thanks!
    Regards,
    Cecilia
    REPORT  ZMISCY004.
    TABLES : COVP, BSIS, BSEG, MSEG, MAKT, CSKU.
    PARAMETERS :
    P_FILE(300) DEFAULT '\sapdcdatasaprptoh.txt' LOWER CASE.
    DATA MSG_TEXT(50).
    DATA :
    XKOKRS LIKE COVP-KOKRS,
    XBELNR LIKE COVP-BELNR,
    XBUZEI LIKE COVP-BUZEI,
    XGJAHR LIKE COVP-GJAHR,
    XPERIO LIKE COVP-PERIO,
    XWKGBTR LIKE COVP-WKGBTR,
    XWTGBTR LIKE COVP-WTGBTR,
    XREFBN LIKE COVP-REFBN,
    XREFBZ LIKE COVP-REFBZ,
    XKSTAR LIKE COVP-KSTAR,
    XBEKNZ LIKE COVP-BEKNZ,
    XMATNR LIKE COVP-MATNR,
    XBUKRS LIKE COVP-BUKRS,
    XREFGJ LIKE COVP-REFGJ,
    XREFBK LIKE COVP-REFBK,
    XLTEXT LIKE CSKU-LTEXT,
    XMAKTX LIKE MAKT-MAKTX,
    XAWTYP LIKE COVP-AWTYP,
    XTWAER LIKE COVP-TWAER,
    XSGTXT LIKE COVP-SGTXT,
    BSEG_KOSTL LIKE BSEG-KOSTL,
    BSEG_MEINS LIKE BSEG-MEINS,
    BSEG_MENGE LIKE BSEG-MENGE,
    MSEG_KOSTL LIKE MSEG-KOSTL,
    MSEG_MENGE LIKE MSEG-MENGE,
    MSEG_MEINS LIKE MSEG-MEINS.
    DATA : BEGIN OF ITAB_COVP OCCURS 10,
    KOKRS LIKE COVP-KOKRS,
    BELNR LIKE COVP-BELNR,
    BUZEI LIKE COVP-BUZEI,
    GJAHR LIKE COVP-GJAHR,
    PERIO LIKE COVP-PERIO,
    WKGBTR(15) TYPE C,
    WTGBTR(15) TYPE C,
    REFBN LIKE COVP-REFBN,
    REFBZ(3) TYPE C,
    KSTAR LIKE COVP-KSTAR,
    BEKNZ LIKE COVP-BEKNZ,
    MATNR LIKE COVP-MATNR,
    BUKRS LIKE COVP-BUKRS,
    REFGJ LIKE COVP-REFGJ,
    REFBK LIKE COVP-REFBK,
    LTEXT LIKE CSKU-LTEXT,
    MAKTX LIKE MAKT-MAKTX,
    AWTYP LIKE COVP-AWTYP,
    TWAER LIKE COVP-TWAER,
    SGTXT LIKE COVP-SGTXT,
    BSIS_WRBTR(13) TYPE C,
    BSEG_KOSTL LIKE BSEG-KOSTL,
    BSEG_MEINS LIKE BSEG-MEINS,
    BSEG_MENGE LIKE BSEG-MENGE,
    MSEG_KOSTL LIKE MSEG-KOSTL,
    MSEG_MENGE LIKE MSEG-MENGE,
    MSEG_MEINS LIKE MSEG-MEINS.
    DATA : END OF ITAB_COVP.
    SELECT M1~KOKRS
           M1~BELNR
           M1~BUZEI
           M1~GJAHR
           M1~PERIO
           M1~WKGBTR
           M1~WTGBTR
           M1~REFBN
           M1~REFBZ
           M1~KSTAR
           M1~BEKNZ
           M1~MATNR
           M1~BUKRS
           M1~REFGJ
           M1~REFBK
           M1~AWTYP
           M1~TWAER
           M1~SGTXT
           M4~KOSTL
           M4~MENGE
           M4~MEINS
    INTO (XKOKRS,
          XBELNR,
          XBUZEI,
          XGJAHR,
          XPERIO,
          XWKGBTR,
          XWTGBTR,
          XREFBN,
          XREFBZ,
          XKSTAR,
          XBEKNZ,
          XMATNR,
          XBUKRS,
          XREFGJ,
          XREFBK,
          XAWTYP,
          XTWAER,
          XSGTXT,
          MSEG_KOSTL,
          MSEG_MENGE,
          MSEG_MEINS
    FROM COVP AS M1
    LEFT OUTER JOIN MSEG AS M4
    ON M1~REFBN = M4~MBLNR AND M1~REFBZ = M4~ZEILE AND M1~REFGJ = M4~MJAHR
    WHERE M1~SCOPE = 'OCOST' AND M1~AWTYP = 'BKPF'
      OR M1~SCOPE = 'OCOST' AND M1~AWTYP = 'MKPF'
      OR M1~KSTAR = '972022'.
    IF XAWTYP = 'BKPF'.
    SELECT KOSTL MENGE MEINS INTO (BSEG_KOSTL, BSEG_MENGE, BSEG_MEINS) FROM
    BSEG WHERE BELNR = XREFBN AND BUZEI = XREFBZ AND GJAHR = XREFGJ AND
    BUKRS = XREFBK.
    ENDSELECT.
    MOVE BSEG-KOSTL TO BSEG_KOSTL.
    MOVE BSEG-MEINS TO BSEG_MEINS.
    MOVE BSEG-MENGE TO BSEG_MENGE.
    ELSE.
    MOVE ' ' TO BSEG_KOSTL.
    MOVE ' ' TO BSEG_MEINS.
    MOVE ' ' TO BSEG_MENGE.
    ENDIF.
    *GET LTEST
    SELECT LTEXT INTO XLTEXT
    FROM CSKU
    WHERE KTOPL = 'COAA' AND SPRAS = 'EN'.
    *GET MAKTX
    IF XMATNR <> ' '.
    SELECT SINGLE * FROM MAKT WHERE MATNR = XMATNR.
    MOVE MAKT-MAKTX TO XMAKTX.
    ELSE.
    MOVE ' ' TO XMAKTX.
    ENDIF.
    MOVE : XKOKRS TO ITAB_COVP-KOKRS,
           XBELNR TO ITAB_COVP-BELNR,
           XBUZEI TO ITAB_COVP-BUZEI,
           XGJAHR TO ITAB_COVP-GJAHR,
           XPERIO TO ITAB_COVP-PERIO,
           XWKGBTR TO ITAB_COVP-WKGBTR,
           XWTGBTR TO ITAB_COVP-WTGBTR,
           XREFBN TO ITAB_COVP-REFBN,
           XREFBZ TO ITAB_COVP-REFBZ,
           XKSTAR TO ITAB_COVP-KSTAR,
           XBEKNZ TO ITAB_COVP-BEKNZ,
           XMATNR TO ITAB_COVP-MATNR,
           XBUKRS TO ITAB_COVP-BUKRS,
           XREFGJ TO ITAB_COVP-REFGJ,
           XREFBK TO ITAB_COVP-REFBK,
           XLTEXT TO ITAB_COVP-LTEXT,
           XMAKTX TO ITAB_COVP-MAKTX,
           XAWTYP TO ITAB_COVP-AWTYP,
           XTWAER TO ITAB_COVP-TWAER,
           XSGTXT TO ITAB_COVP-SGTXT,
           BSEG_KOSTL TO ITAB_COVP-BSEG_KOSTL,
           BSEG_MEINS TO ITAB_COVP-BSEG_MEINS,
           BSEG_MENGE TO ITAB_COVP-BSEG_MENGE,
           MSEG_KOSTL TO ITAB_COVP-MSEG_KOSTL,
           MSEG_MENGE TO ITAB_COVP-MSEG_MENGE,
           MSEG_MEINS TO ITAB_COVP-MSEG_MEINS.
    APPEND ITAB_COVP.
    CLEAR ITAB_COVP.
    ENDSELECT.
    ENDSELECT.
    OPEN DATASET P_FILE FOR OUTPUT IN TEXT MODE.
    IF SY-SUBRC NE 0.
       WRITE: 'File cannot be opened. Reason:', MSG_TEXT.
       EXIT.
    ENDIF.
    LOOP AT ITAB_COVP.
    TRANSFER ITAB_COVP TO P_FILE.
    ENDLOOP.
    CLOSE DATASET P_FILE.

    Cecilia - I think your problemn is a nested select:
    *GET LTEST
      SELECT ltext INTO xltext
      FROM csku
      WHERE ktopl = 'COAA' AND spras = 'EN'.
    *GET MAKTX
        IF xmatnr <> ' '.
          SELECT SINGLE * FROM makt WHERE matnr = xmatnr.
          MOVE makt-maktx TO xmaktx.
        ELSE.
          MOVE ' ' TO xmaktx.
        ENDIF.
        MOVE : xkokrs TO itab_covp-kokrs,
                     etc.
              mseg_meins TO itab_covp-mseg_meins.
        APPEND itab_covp.
        CLEAR itab_covp.
      ENDSELECT.
    Do you need to do the inner select for every cost element text?
    Rob

  • Install new apps in my iphone 5 since I update my iOS to 8.0.2. I already restore my settings and then it works but after 2 days i have this problem again. What to do? Please help

    I Am currently having trouble with my iphone 5. After I update my iOs to 8.0.2 i can't update and install new apps on my phone it always on a "waiting mode". I already restore the setting and its works but after two days problem happened again. Pls help

    Choose System Preferences from the Apple Menu.
    Choose Software Update from the View menu.
    Click Update Now.
    Select the items you want to install, then click Install.
    Enter an Admin user name and password.
    After the update is complete, restart the computer if necessary.

Maybe you are looking for