Mma - please help - breaking my head - Count of calculated Indicator

Hi mma,
I'm having a huge headache. Given a column that's checking 8 other different columns (with case statement) and outputting an indicator Positive or Negative. I want to count all Positive. Problem: 1) I tried changing Positve to 1 and Negative to 0. It works, but it's only displaying values w/o aggregation (I'd like to display counts on a less-detailed level at Categories) - I think the fact that the table is set to the detailed level - isn't helping. 2) I tried this in Answers - but if I do a custom formula SUM (column) - I get crazy numbers. If I select Ag Rule Sum, then I get invalid results as well. 3) I was thinking about inputting a formula at physical sources, but that doesn't work as well. I hope you can save my day. Thanks a lot!

MMA, thanks for reply - sorry for not writing sooner.....after I sit down to reply to you - I sort of figured it out.....My problem was - not using physical CASE statement....so what I did, I had to use a CASE on a physical column, and then sort results through a logical-based column. Thanks for your help.

Similar Messages

Help needed with 915G Neo2 Platinum 2 problems please help doing my head in

System
Case Sonata II 450 watt, MSI 915G Neo2 Platinum, P4 3.4 650 LGA775, 2x512 ddr2 5300 (cruical) Maxtor 200gig sata hd, Sapphire x800, NEC 3540, Sony DVD rom & floppy. My machine runs very stable, 1st problem however on start up I get 3 bleeps can anyone tell me what this means. I have tried looking in the manual but cannot find any reference. The usb dongle that came with the mb is installed & the are 4 green lights on. 2nd problem if I try to load the digi cell software this causes the pc to freeze were I have to switch off at the wall. Thank you for the help.
I have now installed a new mb & I am still getting the 3 beeps. I have ran memtest & the ram passed does anyone have any other idea's.
Thank you for the help.
Report to moderator 84.92.165.224

please help, i am going to throw myself out of the window.

Please help before my head explodes!

Hi, I need help with my Airport Extreme (AE) please.
History - I bought an AE last year as our network range was very limited - I'd previously tried upgrading routers and changing providers etc. We're currently with Sky and have a sky router.
Setup the AE and it changed our lives. More than one connection could be supported at a time and even my son's X-Box connected easily, previously we had an ethernet cable running up the stairs.
We've got an iMac, 2 PC's (pretty old), a MacBook, 2 ipad and 2 iphones. All worked well and we had no problems even when my son was on his X-Box live account.
Then Lion X came out and we upgraded, bringing with it Airport Utility 6.0. The airport extreme stopped working and we could no longer connect to the internet from upstairs. Having read forums etc, I deleted AU 6.0 and reinstalled AU 5.6.
I can now get the AE up and running and AU 5.6 tells me it is reporting no problems and is connected to the internet. However, although the AE is visible and responds to AU 5.6 it does not appear on the list of wireless networks on any device. I've tried everything I can think of, reset the wireless router and the AE to factory settings many times - to the point where I'm doubting my own sanity.
I tried today to re-install AU 6.0 but that turned out to be a minefield and I abandoned it.
All my wireless connections are in good order I've tested them all. They can all see the AE through AU but not through Wi-Fi settings. The light on the AE is green and AU tells me it is connected to the internet.
I'm PC literate and I know UNIX, pretty new to Apple though (apart from the iPhone). I think the terminology is confusing me. My experience of Wi-Fi has been pretty much plug and play and this is driving me nuts.
Any ideas?
Thank you in advance...

Hi, I've got it all working now but only by connecting my AirPort Extreme to the router via an Ethernet Cable. The whole point is it should be wireless. Can anybody point me in the right direction?
Thank you.

Please help: Playlists and Play Counts from iPod?

I got a new computer and have downloaded iTunes. I've Added my music from my external drive, but my Playlists and Counts weren't in the Music file on my external drive.
I attached my iPod and Cancelled the Sync-up so that I could look for files on the iPod and copied over the following that looked like the might be useful:
iTunesControl
iTunesDB
iTunesPlaylists
iTunesPrefs
Preferences
SysInfo
winPrefs
IC-Info.sidb
iEKInfo
Does anyone know if I could put any of these files into my iTunes folder on my new Vista system and would that bring the playlists and everything over? Then I could sync with my new computer and everything should be the same as the old. Thank you!

The file you're wanting is the database ITL file:
http://support.apple.com/kb/HT1660
The path on Vista is \Users\[your username]\Music\iTunes\iTunes Library.itl , I believe. You need to get the ITL file from your old PC if you want to keep your ratings & playcounts.

Apple, please help. Problems with counter on .Mac front page.

This problem has been there for quite some time already. Kindly look into this.
Thanks.
http://discussions.apple.com/thread.jspa?threadID=1081633
http://discussions.apple.com/thread.jspa?threadID=1081518
http://discussions.apple.com/thread.jspa?threadID=992846

Apple won't help via these forums; instead send your feedback to .Mac support via the form at the bottom of this link...
http://www.apple.com/support/dotmac/publishing/

Please help break our java parser

Hello,
We are working on making a Java code parser that will insert timestamp before and after any synchronized events (including wait(), notify() and notifyall()). It will parse in the source code, remove comments and carriage returns (replacing with spaces). It will then replace �{� with � { �, �;� with �; �, and also have
while(stringA.indexOf(". ")>0)
replace(". ", ".");
We'll then splitting the source code by spaces and check each of the tokens to see if they are a synchronized method. If it isn�t then simply return the token however if they are we will add our logging around the token and then return that (i.e. logHere(); wait(); logHere().
Is there any other possibilities that are not covered by the way we parse a Java code?
Thanks for your help and time!
-Team NN

The problem I have is I can make the tree using an array but I need to know how to turn this into code to make the RegularExpression object to be returned.
ie if RE entered by user is a|b, I know how to make it |ab in array
if RE entered by user is ab, I know how to make it .ab in array
I need to know how I can than use this to recursively generate the RegularExpression object. I don't have trouble with + and '|', but I dont know how to use a recursive method to return new sybol
Example: If Regularexpression is abc I am able to get a string from the array .a.bc
How do I make this a RE object. The tree is right associative so I know you have to use a preorder traversal, any ideas.
Thanks for the help before hand.
Thank you

Please help me understand cycle count

The other day, the cycle count of my MBPR 2014 was 5 and it was fully charged, but when the battery went down to 54%, the cycle count went up to 6.
I thought 50% usage of the battery is only half cycle, and if that holds true, my MB's cycle count should remain 5 until I have used more than 50% of the battery, right?

Now if you discharge to 60 percent and recharge it will be 2 cycles.
How so? If I only consumed 40% of the battery before recharging, why would that count as 2 cycles? Now I'm more confused.
About battery cycles
Use of your Mac notebook battery accrues in the form of charge cycles. A charge cycle means using all of the battery’s power, but that doesn’t necessarily mean a single charge. For instance, you could use your notebook for an hour or more one day, using half its charge, and then recharge it fully. If you did the same thing the next day, it would count as one charge cycle, not two, so it may take several days to complete a cycle.
That's according to support.apple.com

Please Help. Itouch Keeps Losing Charge

I have bought my wife an Itouch for her birthday. I have set it up on her PC with Itunes, added music and downloaded some TV shows and fully charged the player. I then turn it off by holding the little button at the top and when the red slider comes up, slide it to the right and power goes off.
When I turn the Itouch on either one or two days later, the battery is dead and it needs fully charging again.
Am I doing something wrong?? Am I not shutting it down properly?
Please help. Thanks

No head phones at all at this stage so it can't be that. All I have done is connect it to the computer, go into Itunes and add some songs and films ready to give it to her for her birthday.
When I charge it, I charge if fully until the little symbol in the charging box changes from that lightning symbol to the fully charged symbol.
I have given the Itouch to my wife today, a day early so she can play with it all day and see how the battery copes.
Thanks again so far for the help.

Songs minutes display - please help!

Let me see if I can explain my question...I've been teaching Spinning at my gym for a couple of years now. For the songs I use, I've added with information about the song in the title to help me teach. For example, we may do something different during each chorus in a song. So if a song has 3 chorus' at :33, 1:45, 2:10, I add that at the end of the title and the information scrolls through as I am teaching. It keeps me from having to keep a notebook with my teaching notes. I have an ipod classic. We also now have an ipod nano. My ipod classic *counts the song up* - it starts at :00 and goes to the end. Our newer nano *counts the song down*. Does anyone know how I can change the newer ipod to count up like the older one does?? *PLEASE HELP*

Doesn't it count DOWN on the lower right corner and count UP on the lower left corner (below the progress bar)? I don't have a nano, so maybe it's different.

Please help this dummy...How this program works??

Hi, I am new in Java...I just bought a book and start to learn the java from that book. Here is one of the project exercise and seems that it is difficult for me to understand the flow of the program.
class HelpClassDemo {
public static void main(String args [])
throws java.io.IOException () {
char choice;
Help hlpobj = new Help;
for(;;) {
do {
hlpobj.showmenu();
do {
choice = (char) System.in.read () ;
} while (choice == '\n' | choice == '\r');
} while ( !hlpobj.isvalid (choice) );
if(choice == 'q' ) break;
System.out.println("\n");
hlpobj.helpon(choice);
Thats what the program code. I don't understand especially after the " } while( !hlpobj.isvalid(choice)); " part. And i don't know what is !hlpobj means....
Please help.....

is it indicated the opposite of hlpobj object or the
opposite of isvalid method?the opposite of the result of isvalid method.
if isvalid method returns true then the opposite of true which false because of the not sign(!)
*/

Join with count() issue, please help!

Hello All,
I have this (probably really simple) issue that I cannot seem to resolve...I have 2 tables here (tbl_system_engineer and tbl_task_request)...(only relevant columns are listed below)
tbl_system_engineer
- id NUMBER
- full_name VARCHAR2
tbl_task_request
- tr_number NUMBER
- submitted_on_date DATE (date task was submitted)
- ass_comp_date DATE (date task is due)
- closed_date DATE (date task was officially closed)
- requestor NUMBER (the system engineer id, the person who created this task)
The query is supposed to summarize how many of the system engineers tasks are as followed:
- "past completion date" - how many tasks have tbl_task_request.closed_date > tbl_task_request.ass_comp_date OR SYSDATE > tbl_task_request.ass_comp_date for the engineer
- "Approaching Completion Date" - how many tasks have a tbl_task_request.ass_comp_date in this month but not "past completion date" for the engineer
- "On Schedule" - how many tasks have a tbl_task_request.ass_comp_date > the end of SYSDATE month and year
The result set rows are supposed to look like...
"System Engineer full name", past completion date count, approaching completion date count, on schedule count
Please help!

Hi,
Welcome to the forum!
That's an example of a Pivot , where you want to GROUP BY a combination of columns, and have some of the columns appear as different columns, not different rows.
The way to do that is to GROUP BY the expression(s) for which you want rows, and use CASE expressions for the others.
For example:
SELECT       e.full_name
,       COUNT ( CASE
               WHEN r.closed_date     > r.xyz_comp_date
               OR    SYSDATE          > r.xyz_comp_date
               THEN 1
              END
            )     AS overdue
,       COUNT ( CASE
               WHEN xyz.comp_date     < ADD_MONTHS ( TRUNC(SYSDATE, 'MONTH')
                                                  , 1
               AND   r.closed_date     <= r.xyz_comp_date
               AND   SYSDATE          <= r.xyz_comp_date
               THEN 1
              END
            )     AS approaching
,       COUNT ( CASE
               WHEN xyz.comp_date     >= ADD_MONTHS ( TRUNC(SYSDATE, 'MONTH')
                                                  , 1
               THEN 1
              END
            )     AS on_schedule
FROM       tbl_system_engineer     e
JOIN       tble_task_request     r     ON     r.requestor     = e.id
GROUP BY e.full_name
;I don't have versions of your tables, so I can't actually test this. I suspect that some consideration for NULLs needs to be added to the CASE conditions.
if you post a little sample data (CREATE TABLE and INSERT statements, relevant columns only) then people can test their ideas.
Sometimes, especially when the columns are mutually exclusive, it's simpler to calculate a value in a sub-query, telling with which column of output each row is associated. That computed value is then used in very simple CASE expressions in the main query,
Among the annoying features of this site is ithat ir replaces what it thinks are naughty words with s. I suspect that happend in your post. I assume all the columns with ** are the same, for which I substituted above.

Hi can anyone please help me! My I phone is in recovery mode i lost it and it was returned to me fully working. I ran an update and it shut down. I have loads of pics and vids of my little girls including my youngest counting to ten for the first time.

Hi can anyone please help. My I Phone is in recovery mode. I have loads of pics and vids including my little girl counting to ten for the first time.
Can I recover these files or have I lost them? I lost the phone last week and it was returned working but with an update to install I did this and it shut down.
If anyone can please help I would be eternally in your debt I have loads of sentimental pctures in here but cant get to them.

Sorry, but if it's in recovery mode, anything on the phone is already gone. If you had PhotoStream turned on, hopefully the photos will still be out there.
You have no choice at this point but to restore from your last backup.

I am using iphone5 and when sending sms within 160 characters i am getting 2 sms counts deduction & i hear the message send sound twice. what is wrong here. can some one please help me here???

i am using iphone5 and when sending sms within 160 characters i am getting 2 sms counts deduction & i hear the message send sound twice. what is wrong here. can some one please help me here???
APPLE need to do something here!!!!!!1

Hi...
Thanks for your repaly .
and i am not bale to post a question in developer forum i tried hard but i didnt get .Can you plz explain me how to post a question in developer forum this is very helpfull for me.Because i never did this thing.

Bluetooth is neither detected nor working. In the system preferences under BLUETOOTH header it says "No information found". Bluetooth icon is not appearing on desktop either. Please help.

Bluetooth is neither detected nor working. In the system preferences under BLUETOOTH header it says "No information found". Bluetooth icon is not appearing on desktop either. Please help.

Yes....It happens all the time. I also erased my HD and installed Snow Leopard but with no success. Tried lots of REBOOTING but nothing worked for me.As I have already installed the new OSX I think there is no need to go through the below procedure. What do you suggest?
Before you go through the ritual of reinstalling the entire system just try to do a "factory reset" of your bluetooth environment. To do this you need to run the Bluetooth Explorer which is a utility installed as part of XCode.
1. Launch Bluetooth Explorer.
2. Select the "Modify Software & Device Configuration" from the Utilities menu.
3. Keep the first 4 checkboxes checked (one will say "Full factory reset").
4. Click "Perform actions" button (lower right of window).
5. Reboot (possibly the Reboot NOW button will work, if not just do a normal reboot).
Hopefully that will clear your problem(s) so you can re-pair your bluetooth devices.
Good luck.

Can you please help to understand how the firefox decides on the Expires date for a cached javascript file ( my server did not set any Expire header, but firebox set it down).

# Question
Can you please help to understand how the firefox decides on the Expires date for a cached javascript file ( my server did not set any Expire header, but firebox set it down). I tried to understand but different javascript file gets different Expires date value when it is being cached. Please help me as I tried lot and could not get proper answer for this. Thanks in Advance.

Try posting at the Web Development / Standards Evangelism forum at MozillaZine. The helpers over there are more knowledgeable about web page development issues with Firefox. <br />
http://forums.mozillazine.org/viewforum.php?f=25 <br />
You'll need to register and login to be able to post in that forum.

Mma - please help - breaking my head - Count of calculated Indicator

Similar Messages

Maybe you are looking for