MMBE - Open order quatity
on the stock overview report, i want to know what the column open order quantity represents...
Hello,
Open order qty in stock overview displays the total qty of that order which has been ordered in purchase orders(s) and not yet delivered.
Suppose we order have 3 purchase orders for 200, 300 & 500 qty of a particular material and we have received 150, 200 & 480 qty for each POs respectively.
So when we execute MMBE, it will show 170 qty [(200-150)(300-200)(500-480)] as open order qty.
You can see the open purchase orders by selecting, a particular line (plant or storage location) and go to extras - open purchase orders (Shift + F2) or you can use t.code ME2M with selection parameter as WE101.
To remove a particular purchase order qty from open order qy, or open PO list, you can tick the 'delivery completed' indicator in PO-Item details - delivery tab.
Regards
Gregory Mathews
Similar Messages
-
Dear all gurus,
I'm checking the total qty as of today for a material A which is stored in plant-P1, storage location SL1 and SL2.
However, if I use the MMBE, I can see both of the storage locations but without any unrest-used qty at all. When I scroll to the right, I can see that both storage locations are having some open order qty.
When I use SE16N to view the MARD table, why I only can see the SL1 record only?
Which table will keep track all the open order qty?
Thanks in advance.
Regards,
Edwin FuHi ,
Go to ME2L or ME2N select plant , purchase group and etc and scope of list should be ALV . Once you execute you will get report . Here go to change layout as per your requirement and save it . Covert report in to local file . Here you can find pending or yet to deliver items or open order qty .
Reward if helpful,.
Regards
RB -
Material Stock along with open order qty
Dear All,
Is there any standard report where in i can get the stock of any material at a location along with the Open purchase order qty
for multiple item
in mmbe i can get only single item wise ...
kindly guide.
Shailesh PanchalDear,
There is no std report as per ur requirement, u need to develop a Z-report for ur requirement.
Make use of table MARD for UR Stock, and
open PO qty check table EKET (Scheduling Agreement Schedule Lines)
Open Po Qty = field: MENGE(Scheduled Quantity)-field: WAMNG(Issued Quantity) and also check
In EKPO table field ELIKZ is for Delivery completed
PO's for which this flag is not ticked are considered as open PO to get Open order Qty u need to check fields
MENGE Order quantity
WEPOS Goods receipt
Diff bet these two fields is Open Order Qty
Regards,
Gopala.S -
Open Orders status against Stock
C024 doesn't show current avail. stock and open orders against that stock...like MD07or MD04 etc..
If I use the MD04 or MD07 screens I am doing things the hard way but without Mimi, do you have any other suggestions?
Thank you for your help in advance.Joye,
MMBE can also give you the stock and open order figures. But you cannot get that in CO24. If it is really required probably you need to create a Custom transaction of your own after copying the standard CO24 transaction.
Regards,
Prasobh -
Display Totol Stock & Open Order Quantity for line item while creating SO
Dear Experts,
We have requiremet that while creating SO (VA01) for each item it sould show the message (Popup Screen) about Total Stock & Total Open Oder quantity for that material when user enters the material, plant & storage location in line item.
Please let me know your ideas in detail if anyone knows about this....
Thanks in Advance
Best Regards
VenkateshDear Venkatesh
It is a standard if you create sale order, whatever stock is available in MMBE, it will show during availability check but additionally if you want to see open orders, then you have to go for additional enhancement.
thanks
G. Lakshmipathi -
Report for open orders and amount of product confirmed
Hi All,
Can some one give me an idea on a report which shows open orders and also shows amount of product confirmed against these open orders?
Thanks,
Neelima.Hi Veni,
Incomplete order are the order's in which some data is missing so that particular order can't be further processed, that is what you could check through "Incompletion Log". Whereas Open orders are the orders which are open for further processing viz. deliver billing(but open order is a complete order i.e. no data missing).
Check this program:
*& Report ZGM_OPENPO *
REPORT ZGM_OPENPO NO STANDARD PAGE HEADING LINE-SIZE 132 LINE-COUNT 36(2).
TABLES: t001w, "Plants/Branches
ekko, "Purchasing Document Header
ekpo, "Purchasing Document Item
marc, "Plant Data for Material
mara. "General Material Data
DATA:
BEGIN OF itab OCCURS 0,
matnr LIKE marc-matnr,
werks LIKE marc-werks,
beskz LIKE marc-beskz,
mmsta LIKE marc-mmsta,
END OF itab.
DATA: BEGIN OF iekpo OCCURS 0,
ebeln LIKE ekpo-ebeln,
menge LIKE ekpo-menge,
aedat LIKE ekpo-aedat,
wemng LIKE eket-wemng,
END OF iekpo.
DATA: BEGIN OF iekko OCCURS 0,
ebeln LIKE ekko-ebeln,
lifnr LIKE ekko-lifnr,
bedat LIKE ekko-bedat,
ekgrp LIKE ekko-ekgrp,
END OF iekko.
selection-screen:begin of block b1 with frame title text001.
SELECT-OPTIONS werks FOR ekpo-werks OBLIGATORY.
SELECT-OPTIONS matnr FOR ekpo-matnr.
SELECT-OPTIONS beskz FOR marc-beskz.
SELECT-OPTIONS bsart FOR ekko-bsart.
selection-screen:end of block b1.
INITIALIZATION.
AT SELECTION-SCREEN ON werks. "Validate for werks
SELECT SINGLE * FROM t001w WHERE werks IN werks.
IF sy-subrc 0. MESSAGE e429(mo). ENDIF.
AT SELECTION-SCREEN ON matnr.
SELECT SINGLE * FROM mara WHERE matnr IN matnr.
IF sy-subrc 0. MESSAGE e429(mo).ENDIF.
START-OF-SELECTION.
SELECT * FROM marc INTO CORRESPONDING FIELDS OF TABLE itab WHERE werks IN werks AND beskz IN beskz AND
matnr IN matnr.
SELECT ebeln FROM ekpo INTO CORRESPONDING FIELDS OF TABLE iekpo
FOR ALL ENTRIES IN itab WHERE matnr = itab-matnr AND loekz EQ space.
SELECT ebeln lifnr bedat ekgrp FROM ekko INTO CORRESPONDING FIELDS OF
TABLE iekko
FOR ALL ENTRIES IN iekpo WHERE ebeln = iekpo-ebeln AND bsart IN bsart.
SELECT ebeln menge aedat FROM ekpo INTO CORRESPONDING FIELDS OF iekpo
FOR ALL ENTRIES IN iekpo WHERE ebeln = iekpo-ebeln. MODIFY iekpo INDEX sy-dbcnt.
ENDSELECT.
SORT iekpo BY aedat.
DELETE ADJACENT DUPLICATES FROM iekpo COMPARING ebeln.
SELECT wemng FROM eket INTO CORRESPONDING FIELDS OF iekpo FOR ALL ENTRIES IN iekpo WHERE ebeln = iekpo-ebeln.
MODIFY iekpo INDEX sy-dbcnt.
ENDSELECT.
END-OF-SELECTION.
DATA : file_name TYPE string.
file_name = 'c:\pay_det\open_po1.xls'.
DATA : BEGIN OF it_join_fields OCCURS 0,
field_name(20),
END OF it_join_fields.
CLEAR it_join_fields.
it_join_fields-field_name = 'ebeln'.
APPEND it_join_fields.
CLEAR it_join_fields.
it_join_fields-field_name = 'menge'.
APPEND it_join_fields.
CLEAR it_join_fields.
it_join_fields-field_name = 'aedat'.
APPEND it_join_fields.
CLEAR it_join_fields.
it_join_fields-field_name = 'wemng'.
APPEND it_join_fields.
CLEAR it_join_fields.
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
BIN_FILESIZE =
filename = file_name
filetype = 'ASC'
APPEND = 'X'
write_field_separator = 'X'
TABLES
data_tab = iekpo
FIELDNAMES = it_join_fields
IF sy-subrc 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
LOOP AT iekpo.
IF iekpo-menge NE iekpo-wemng.
WRITE:/4 iekpo-ebeln,21 iekpo-menge ,46 iekpo-aedat, 56 iekpo-wemng.
ENDIF.
ENDLOOP.
if sy-subrc 0. write / 'no data exist for this plant'. endif.
TOP-OF-PAGE.
uline 1(80).
WRITE :/ sy-vline, 20 ' OPEN purchase ORDERs report' color 5,
80 sy-vline.
uline 1(80).
WRITE:/ sy-vline , 4 'PURSCHASE ORDER' COLOR COL_HEADING,
20 sy-vline, 21 'ORDER QUANTITY' COLOR COL_HEADING,
45 sy-vline, 46 'item change' color col_heading, 55 sy-vline,
56 'RECIEVED QUANTITY' COLOR COL_HEADING, 80 sy-vline.
uline 1(80).
END-OF-PAGE.
WRITE :/ 'PAGE NUMBER' ,SY-PAGNO.
Hope this helps you.
Regards,
Chandra Sekhar -
Report for open order and shipped qty summary
Dear Folks,
Can any one please help me.
Report for open order summary Vs shipped quantity
what are the related programs to it.
throw some light on it.>
arpita b wrote:
> Dear rohit
>
> Iam asking about any report which compares or give details of open order vs shipped qty.
>
> Any sis report is available for this?
Hi Arpita,
There is no such sis report available. You will have to configure and create two seperate reports and do the comparison.
If you want, I will send you the list of all T.codes used to generate reports in SD.
Revert back to me if you need the same.
Regards,
Swapna D. -
Open order qty,Delivered qty,issued qty, and closing stock---Tables
Gurus,
I need to Prepare a report which will show open order qty,Delivered qty,issued qty, and closing stock.
Please help me with table names where i can find .
Regards
venu gopalHi,
Try EKPO & EKBE tables..
Thx
Raju -
Open orders and Shipped not billed orders
Hi All,
What is the fastest way to calculate the open orders amount and shipped not billed amount for a given customer.
Thanks
Venugopal ReddyCan u try this option and see if this is increasin your performance.
For the billing documents ...
Goto table VBUK and check the fields LFSTK = 'C' " Delivery completed and
FKSTK NE 'C' . "billing open
At header level check that GBSTK ne C "over all processing status is open .
This will yield you the list of open Invoices ..
You need to bring in the select query with a join on VBRK and VBUK ..
once u get the list of open invoices then calculate the open qty from VBRP and VBUP where VBUP-GBSTA ne 'C'.
here pick the qty from vbrp and sum it up to check the open qty.
just like this ..
SELECT vbeln
fkart
kunag
gbstk
INTO TABLE it_billing_h
FROM vbrkuk "VBRKUK is a DB view " VBAK+VBUK
WHERE vkorg IN so_vkorg
AND vtweg IN so_vtweg
AND spart IN so_spart
AND kunag IN so_kunnr
AND gbstk NE 'C'.
IF NOT it_billing_h[] IS INITIAL.
SELECT c~vbeln
c~posnr
c~matnr
c~fkimg "---->open qty
d~fksta
d~fksaa
d~uvfak
d~fkivp
d~fssta
d~gbsta
INTO TABLE it_billing_items
FROM vbrp AS c JOIN vbup AS d
ON dvbeln EQ cvbeln
AND dposnr EQ cposnr
FOR ALL ENTRIES IN it_billing_h
WHERE d~vbeln EQ it_billing_h-vbeln
AND d~gbsta NE 'C'.
use control break and sum the qty ..
hope this helps ,
Regards,
Vijay -
Open Order Quantity for open sales orders
Is there a standard SAP Report that gives the open order quantity for every open sales order. "Open" is defined as any order quantity that has not shipped. Delivery creation is not the same as shipment. VA05 Report does not contain enough information to calculate the open order quantity for an ERP-based backlog report.
Try VA05 schedule lines standar variant...include status fields and both ordered qty and confirmed qty. In SAP standard system order status, status A means open orders fully (Nothing shipped, everything opened). Status B means in process orders (Partially processed - shipped). Status C means complete orders (Nothing opened). As there is no delivered qty in VA05, you need to download to excel the file and calculate the difference between both qty fields for each A and B status. That is a way to get the missing qty to be delivered or open qty as you stated.
Hope it helps.
Jorge Fernandez -
How to get the open order quantity for a material
Hi All,
We need to get the open order quantity for materials. At present we are using the following logic...
SELECT VBAKVBELN VBAPPOSNR VBAP~KWMENG
INTO TABLE IT_VBAP
FROM VBAP
INNER JOIN VBAK ON VBAKVBELN = VBAPVBELN
INNER JOIN VAPMA ON VAPMAVBELN = VBAPVBELN
AND VAPMAPOSNR = VBAPPOSNR
INNER JOIN VBUP ON VBUPVBELN = VBAPVBELN
AND VBUPPOSNR = VBAPPOSNR
WHERE VAPMA~MATNR = IT_OUTPUT-MATNR
AND VAPMA~WERKS = IT_OUTPUT-WERKS
AND VBAK~AUART IN S_AUART
AND VBUP~GBSTA NE 'C'.
But the Query takes quite a long time as it does a full range scan on all the tables. Is there any way the query can be improved, may be by creating an index etc? Or is there anyother way by which i can get the required data?
Any input is appreciated.
Regards
Brain.This could help.
*& Report: zsdvr055 date written: 03/24/00 *
*& Author: Brian Huntley last update: 03/24/00 *
*& Program Title: Open Order Report *
*& Description: This report will create a list of sales documents *
*& that are open (contain at least one item that is not shipped). *
*& The report will sort by ship-to customer name and by sales *
*& document number. *
*& Tables: *
*& Files: *
*& Transactions: *
*& Changes: *
REPORT ZSDVR055 LINE-SIZE 255.
TABLES: VBPA,
VBAP,
VBUP,
VBAK,
VBKD,
KNA1,
VBEP,
VBFA,
LIKP,
LIPS,
EKET,
T171T.
define hashed table for selected ship-to and sold-to SO's
TYPES: BEGIN OF TVBPA_TYPE,
VBELN LIKE VBPA-VBELN, "sales document
POSNR LIKE VBPA-POSNR, "item number
PARVW LIKE VBPA-PARVW, "partner function
KUNNR LIKE VBPA-KUNNR, "customer number
END OF TVBPA_TYPE.
DATA: TVBPA TYPE HASHED TABLE OF TVBPA_TYPE
WITH UNIQUE KEY VBELN POSNR PARVW WITH HEADER LINE.
define internal table for all selected SO's
DATA: BEGIN OF ITAB0 OCCURS 0,
VBELN LIKE VBPA-VBELN, "sales document
END OF ITAB0.
define internal table for all selected SO items
DATA: BEGIN OF ITAB OCCURS 0,
VBELN LIKE VBAP-VBELN, "document number
POSNR LIKE VBAP-POSNR, "item number
MATNR LIKE VBAP-MATNR, "material
ARKTX LIKE VBAP-ARKTX, "description
PSTYV LIKE VBAP-PSTYV, "item category
KDMAT LIKE VBAP-KDMAT, "customer material
NETWR LIKE VBAP-NETWR, "net value
WAERK LIKE VBAP-WAERK, "currency
KWMENG LIKE VBAP-KWMENG, "quantity
ERDAT LIKE VBAP-ERDAT, "entry date
NETPR LIKE VBAP-NETPR, "net price
KPEIN LIKE VBAP-KPEIN, "pricing unit
PRCTR LIKE VBAP-PRCTR, "profit center
ERNAM LIKE VBAK-ERNAM, "entered by
AUART LIKE VBAK-AUART, "order type
VKORG LIKE VBAK-VKORG, "sales organization
VTWEG LIKE VBAK-VTWEG, "distribution channel
VDATU LIKE VBAK-VDATU, "requested date (header)
BNAME LIKE VBAK-BNAME, "name of orderer
KUNNR LIKE VBAK-KUNNR, "sold-to customer
BZIRK LIKE VBKD-BZIRK, "sales district
KURSK LIKE VBKD-KURSK, "conversion rate
BSTKD LIKE VBKD-BSTKD, "customer PO
LFGSA LIKE VBUP-LFGSA, "overall delivery status
FKSAA LIKE VBUP-FKSAA, "overall billing status
KUNWE LIKE VBPA-KUNNR, "ship-to customer
NAME1 LIKE KNA1-NAME1, "ship-to customer name
ORT01 LIKE KNA1-ORT01, "ship-to address
REGIO LIKE KNA1-REGIO, "ship-to region (state)
LAND1 LIKE KNA1-LAND1, "ship-to country
END OF ITAB.
create internal table for open orders
DATA: BEGIN OF ITAB1 OCCURS 0,
KUNNR LIKE VBAK-KUNNR, "sold-to customer
KUNWE LIKE VBPA-KUNNR, "ship-to customer
VBELN LIKE VBAP-VBELN, "document number
POSNR LIKE VBAP-POSNR, "item number
ZDATE1 LIKE VBEP-EDATU, "requested date
ZDATE2 LIKE VBEP-EDATU, "scheduled date (confirm)
ZDATE3 LIKE VBEP-EDATU, "committed date
ZQTY1 LIKE VBAP-KWMENG, "qty ordered
ZQTY2 LIKE VBEP-BMENG, "backlog qty
ZEXTD LIKE VBAP-NETWR, "backlog net value
ZDESC(30) TYPE C, "backlog description
END OF ITAB1.
define internal table for SO schedule lines
DATA: BEGIN OF ITAB2A OCCURS 0,
WADAT LIKE VBEP-WADAT, "planned goods issue date
VBELN LIKE VBAP-VBELN, "document number
POSNR LIKE VBAP-POSNR, "item number
WMENG LIKE VBEP-WMENG, "qty ordered
BMENG LIKE VBEP-BMENG, "qty confirmed
END OF ITAB2A.
define internal table for SO item request dates
DATA: BEGIN OF ITAB2B OCCURS 0,
EDATU LIKE VBEP-EDATU, "delivery date
VBELN LIKE VBAP-VBELN, "document number
POSNR LIKE VBAP-POSNR, "item number
WMENG LIKE VBEP-WMENG, "qty ordered
END OF ITAB2B.
define internal table for SO item commit dates
DATA: BEGIN OF ITAB2C OCCURS 0,
EDATU LIKE VBEP-EDATU, "delivery date
VBELN LIKE VBAP-VBELN, "document number
POSNR LIKE VBAP-POSNR, "item number
ROMS1 LIKE VBEP-WMENG, "committed qty
END OF ITAB2C.
define internal table for SO item deliveries
DATA: BEGIN OF ITAB3 OCCURS 0,
VGBEL LIKE LIPS-VGBEL, "sales document
VGPOS LIKE LIPS-VGPOS, "sales document item
VBELN LIKE LIKP-VBELN, "delivery number
POSNR LIKE LIPS-POSNR, "delivery item number
WADAT LIKE LIKP-WADAT, "planned GI date
WADAT_IST LIKE LIKP-WADAT_IST, "actual GI date
LFIMG LIKE LIPS-LFIMG, "actual qty delivered
ERDAT LIKE LIKP-ERDAT, "date created
ERZET LIKE LIKP-ERZET, "time created
END OF ITAB3.
define internal table for SO item / delivery cross reference
DATA: BEGIN OF ITAB4 OCCURS 0,
VBELV LIKE VBFA-VBELV, "sales document
POSNV LIKE VBFA-POSNV, "sales document item
VBELN LIKE VBFA-VBELN, "delivery number
POSNN LIKE VBFA-POSNN, "delivery item
VBTYP_N LIKE VBFA-VBTYP_N, "document category
RFMNG LIKE VBFA-RFMNG, "qty delivered
PLMIN LIKE VBFA-PLMIN, "plus/minus flag
END OF ITAB4.
define local variables
DATA: ORDR_QTY LIKE VBEP-WMENG, "order qty
CONF_QTY LIKE VBEP-BMENG, "confirmed qty
NOCONF_QTY LIKE VBEP-BMENG, "qty not confirmed
DELV_QTY LIKE VBEP-WMENG, "qty delivered
NODELV_QTY LIKE VBEP-WMENG, "qty not delivered
REMAIN_QTY LIKE VBEP-WMENG, "qty remain to get conf date
REQ_DATE LIKE VBEP-EDATU, "request date
COM_DATE LIKE VBEP-EDATU, "committed date
DELV_QTY1 LIKE VBEP-WMENG, "preceding delivery qty
REMAIN_QTY1 LIKE VBEP-WMENG, "qty remain to get reqest date
REMAIN_QTY2 LIKE VBEP-WMENG, "qty remain to get commit date
THIRD_QTY LIKE VBEP-WMENG, "3rd party no PO qty
SO_STOCK LIKE MSKA-KALAB, "sales order stock
ZPRICE LIKE VBAP-NETPR, "unit price USD
ADRS1(40) TYPE C, "concatenated city and region
ADRS2(45) TYPE C, "city, region and country
ADRS3(80) TYPE C, "name, city, rgn, ctry
ZCNTR TYPE I. "counter
define select options
SELECTION-SCREEN BEGIN OF BLOCK BLK1 WITH FRAME TITLE TEXT-001.
SELECT-OPTIONS: S_VKORG FOR VBAK-VKORG DEFAULT '1000',
S_VTWEG FOR VBAK-VTWEG DEFAULT '10' NO-DISPLAY,
S_SPART FOR VBAK-SPART DEFAULT '00' NO-DISPLAY,
S_KUNNR FOR VBPA-KUNNR MATCHCODE OBJECT DEBI,
S_KUNWE FOR VBPA-KUNNR MATCHCODE OBJECT DEBI.
SELECTION-SCREEN SKIP.
SELECT-OPTIONS:
S_BZIRK FOR VBKD-BZIRK,
S_PRCTR FOR VBAP-PRCTR,
S_MATNR FOR VBAP-MATNR MATCHCODE OBJECT MAT1,
S_ERNAM FOR VBAK-ERNAM,
S_ERDAT FOR VBAP-ERDAT.
SELECTION-SCREEN END OF BLOCK BLK1.
AT SELECTION-SCREEN.
IF S_KUNNR IS INITIAL AND S_KUNWE IS INITIAL.
MESSAGE E005(ZM) WITH TEXT-100.
ENDIF.
MAIN PROGRAM
INITIALIZATION.
INCLUDE ZSYHEADR.
START-OF-SELECTION.
PERFORM 100_GET_SO_ITEMS.
PERFORM 200_GET_NO_DELIVERY.
PERFORM 300_GET_NO_GOODS_ISSUE.
PERFORM 400_GET_PARTIAL_DELIVERY.
PERFORM 500_GET_THIRD_PARTY.
PERFORM 900_CREATE_LIST.
FORM 100_GET_SO_ITEMS
FORM 100_GET_SO_ITEMS.
get SO's for selected ship-to and sold-to customers
REFRESH TVBPA.
IF NOT S_KUNNR IS INITIAL.
SELECT VBELN POSNR PARVW KUNNR
FROM VBPA INTO TABLE TVBPA
WHERE KUNNR IN S_KUNNR AND PARVW = 'AG' AND VBELN < '0080000000'.
ENDIF.
IF NOT S_KUNWE IS INITIAL.
SELECT VBELN POSNR PARVW KUNNR
FROM VBPA APPENDING TABLE TVBPA
WHERE KUNNR IN S_KUNWE AND PARVW = 'WE' AND VBELN < '0080000000'.
ENDIF.
DESCRIBE TABLE TVBPA LINES ZCNTR.
IF ZCNTR = 0.
WRITE: /1 'No data found for selection'.
STOP.
ENDIF.
eliminate duplicate SO's
LOOP AT TVBPA.
CLEAR ITAB0.
MOVE TVBPA-VBELN TO ITAB0-VBELN.
APPEND ITAB0.
ENDLOOP.
DELETE ADJACENT DUPLICATES FROM ITAB0.
get SO detail
SELECT VBAP~VBELN VBAP~POSNR VBAP~MATNR VBAP~ARKTX VBAP~PSTYV
VBAP~KDMAT VBAP~NETWR VBAP~WAERK VBAP~KWMENG VBAP~ERDAT
VBAP~NETPR VBAP~KPEIN VBAP~PRCTR VBAK~ERNAM VBAK~AUART
VBAK~VKORG VBAK~VTWEG VBAK~VDATU VBAK~BNAME VBAK~KUNNR
VBKD~BZIRK VBKD~KURSK VBKD~BSTKD VBUP~LFGSA VBUP~FKSAA
FROM VBAP INNER JOIN VBUP ON VBUP~VBELN = VBAP~VBELN AND
VBUP~POSNR = VBAP~POSNR
INNER JOIN VBKD ON VBKD~VBELN = VBAP~VBELN AND
VBKD~POSNR = VBAP~POSNR
INNER JOIN VBAK ON VBAK~VBELN = VBAP~VBELN
INTO TABLE ITAB FOR ALL ENTRIES IN ITAB0
WHERE VBAP~VBELN = ITAB0-VBELN AND VBAP~MATNR IN S_MATNR AND
VBAP~ERDAT IN S_ERDAT AND VBAP~PRCTR IN S_PRCTR AND
VBAP~ABGRU = SPACE AND VBKD~BZIRK IN S_BZIRK AND
VBAK~VKORG IN S_VKORG AND VBAK~VTWEG IN S_VTWEG AND
VBAK~SPART IN S_SPART AND VBAK~KUNNR IN S_KUNNR AND
VBAK~ERNAM IN S_ERNAM.
IF SY-SUBRC <> 0.
WRITE: /1 'No data found for selection'.
STOP.
ENDIF.
loop thru SO items
LOOP AT ITAB.
get ship-to customer
IF NOT S_KUNWE IS INITIAL.
CLEAR TVBPA.
READ TABLE TVBPA WITH TABLE KEY VBELN = ITAB-VBELN
POSNR = ITAB-POSNR PARVW = 'WE'.
IF SY-SUBRC <> 0.
READ TABLE TVBPA WITH TABLE KEY VBELN = ITAB-VBELN
POSNR = '000000' PARVW = 'WE'.
ENDIF.
MOVE TVBPA-KUNNR TO ITAB-KUNWE.
ELSE.
CLEAR ITAB-KUNWE.
SELECT SINGLE KUNNR FROM VBPA INTO ITAB-KUNWE
WHERE VBELN = ITAB-VBELN AND POSNR = ITAB-POSNR AND
PARVW = 'WE'.
IF SY-SUBRC <> 0.
SELECT SINGLE KUNNR FROM VBPA INTO ITAB-KUNWE
WHERE VBELN = ITAB-VBELN AND POSNR = '000000' AND
PARVW = 'WE'.
ENDIF.
ENDIF.
IF NOT ITAB-KUNWE IN S_KUNWE.
DELETE ITAB.
CONTINUE.
ENDIF.
get ship-to customer address info
SELECT SINGLE NAME1 ORT01 REGIO LAND1 FROM KNA1
INTO (ITAB-NAME1, ITAB-ORT01, ITAB-REGIO, ITAB-LAND1)
WHERE KUNNR = ITAB-KUNWE.
MODIFY ITAB.
ENDLOOP.
SORT ITAB BY VBELN POSNR.
ENDFORM.
FORM 200_GET_NO_DELIVERY
get detail for SO items w/ no deliveries for order document types
(ZZOR, ZZC1, ZZCO, ZZRP, ZZRW, KE, KR, ZCHP, ZPSO, ZZNC)
FORM 200_GET_NO_DELIVERY.
LOOP AT ITAB WHERE AUART = 'ZZOR' OR AUART = 'ZZC1' OR
AUART = 'ZZCO' OR AUART = 'ZZRP' OR AUART = 'ZZRW' OR
AUART = 'KE' OR AUART = 'KR' OR AUART = 'ZCHP' OR
AUART = 'ZPSO' OR AUART = 'ZZNC'.
select if delivery status = A (not delivered)
IF ITAB-LFGSA = 'A'.
assign values to detail fields
CLEAR ITAB1.
ITAB1-KUNNR = ITAB-KUNNR.
ITAB1-KUNWE = ITAB-KUNWE.
ITAB1-VBELN = ITAB-VBELN.
ITAB1-POSNR = ITAB-POSNR.
IF ITAB-KURSK = 0.
ITAB-KURSK = 1.
ENDIF.
IF ITAB-KPEIN = 0.
ITAB-KPEIN = 1.
ENDIF.
select schedule lines for SO item and write to internal table itab2a
SELECT WADAT VBELN POSNR WMENG BMENG
FROM VBEP INTO TABLE ITAB2A
WHERE VBELN = ITAB-VBELN AND POSNR = ITAB-POSNR.
select sched lines w/request date and write to internal table itab2b
SELECT EDATU VBELN POSNR WMENG
FROM VBEP INTO TABLE ITAB2B
WHERE VBELN = ITAB-VBELN AND POSNR = ITAB-POSNR AND
WMENG <> 0.
select sched lines w/commit date and write to internal table itab2c
SELECT EDATU VBELN POSNR ROMS1
FROM VBEP INTO TABLE ITAB2C
WHERE VBELN = ITAB-VBELN AND POSNR = ITAB-POSNR AND
ROMS1 <> 0.
SORT ITAB2A BY WADAT.
SORT ITAB2B BY EDATU.
SORT ITAB2C BY EDATU.
ORDR_QTY = 0.
CONF_QTY = 0.
NOCONF_QTY = 0.
calculate the unconfirmed qty for a SO item
LOOP AT ITAB2A.
CONF_QTY = CONF_QTY + ITAB2A-BMENG.
ORDR_QTY = ORDR_QTY + ITAB2A-WMENG.
ENDLOOP.
NOCONF_QTY = ORDR_QTY - CONF_QTY.
LOOP AT ITAB2A WHERE BMENG <> 0.
PERFORM GET_REQUEST_DATE TABLES ITAB2B
USING ITAB2A-BMENG REQ_DATE.
PERFORM GET_COMMIT_DATE TABLES ITAB2C
USING ITAB2A-BMENG COM_DATE.
ITAB1-ZDATE1 = REQ_DATE.
ITAB1-ZDATE2 = ITAB2A-WADAT.
ITAB1-ZDATE3 = COM_DATE.
ITAB1-ZQTY1 = ITAB-KWMENG.
ITAB1-ZQTY2 = ITAB2A-BMENG.
ITAB1-ZDESC = 'no delivery, confirmed'.
calculate net value for backlog qty
ZPRICE = ( ITAB-NETPR / ITAB-KPEIN ) * ITAB-KURSK.
ITAB1-ZEXTD = ITAB1-ZQTY2 * ZPRICE.
if order type is consignment return (KR), reverse sign
IF ITAB-AUART = 'KR'.
ITAB1-ZQTY1 = ITAB1-ZQTY1 * -1.
ITAB1-ZQTY2 = ITAB1-ZQTY2 * -1.
ITAB1-ZEXTD = ITAB1-ZEXTD * -1.
ENDIF.
APPEND ITAB1.
ENDLOOP.
get request date for SO item
IF NOCONF_QTY <> 0.
PERFORM GET_REQUEST_DATE TABLES ITAB2B
USING NOCONF_QTY REQ_DATE.
PERFORM GET_COMMIT_DATE TABLES ITAB2C
USING NOCONF_QTY COM_DATE.
ITAB1-ZDATE1 = REQ_DATE.
ITAB1-ZDATE2 = '99991231'.
ITAB1-ZDATE3 = COM_DATE.
ITAB1-ZQTY1 = ITAB-KWMENG.
ITAB1-ZQTY2 = NOCONF_QTY.
ITAB1-ZDESC = 'no delivery, not confirmed'.
calculate net value for backlog qty
ZPRICE = ( ITAB-NETPR / ITAB-KPEIN ) * ITAB-KURSK.
ITAB1-ZEXTD = ITAB1-ZQTY2 * ZPRICE.
if order type is consignment return (KR), reverse sign
IF ITAB-AUART = 'KR'.
ITAB1-ZQTY1 = ITAB1-ZQTY1 * -1.
ITAB1-ZQTY2 = ITAB1-ZQTY2 * -1.
ITAB1-ZEXTD = ITAB1-ZEXTD * -1.
ENDIF.
APPEND ITAB1.
ENDIF.
ENDIF.
ENDLOOP.
ENDFORM.
FORM 300_GET_NO_GOODS_ISSUE
get detail for SO items w/deliveries and no goods issue for
doc types (ZZOR, ZZC1, ZZCO, ZZRP, ZZRW, KE, KR, ZCHP, ZPSO, ZZNC)
FORM 300_GET_NO_GOODS_ISSUE.
get detail for deliveries w/no goods issue
SELECT VBELN WADAT WADAT_IST ERDAT ERZET
FROM LIKP INTO (LIKP-VBELN, LIKP-WADAT, LIKP-WADAT_IST,
LIKP-ERDAT, LIKP-ERZET)
WHERE WADAT_IST = 0.
select if actual qty delivered <> 0
CLEAR LIPS.
SELECT POSNR VGBEL VGPOS LFIMG
FROM LIPS INTO (LIPS-POSNR, LIPS-VGBEL, LIPS-VGPOS, LIPS-LFIMG)
WHERE VBELN = LIKP-VBELN AND LFIMG <> 0.
select if goods movement status on delivery = A (no goods issue)
CLEAR VBUP.
SELECT SINGLE WBSTA FROM VBUP INTO VBUP-WBSTA
WHERE VBELN = LIKP-VBELN AND POSNR = LIPS-POSNR.
IF VBUP-WBSTA = 'A'.
CLEAR ITAB3.
ITAB3-VGBEL = LIPS-VGBEL.
ITAB3-VGPOS = LIPS-VGPOS.
ITAB3-VBELN = LIKP-VBELN.
ITAB3-POSNR = LIPS-POSNR.
ITAB3-WADAT = LIKP-WADAT.
ITAB3-WADAT_IST = LIKP-WADAT_IST.
ITAB3-LFIMG = LIPS-LFIMG.
ITAB3-ERDAT = LIKP-ERDAT.
ITAB3-ERZET = LIKP-ERZET.
APPEND ITAB3.
ENDIF.
ENDSELECT.
ENDSELECT.
SORT ITAB3 BY VGBEL VGPOS VBELN POSNR.
loop thru deliveries w/no goods issue and get SO item detail
LOOP AT ITAB3.
CLEAR ITAB.
READ TABLE ITAB WITH KEY VBELN = ITAB3-VGBEL POSNR = ITAB3-VGPOS.
IF SY-SUBRC <> 0.
IF ITAB-AUART = 'ZZOR' OR ITAB-AUART = 'ZZC1' OR
ITAB-AUART = 'ZZCO' OR ITAB-AUART = 'ZZRP' OR
ITAB-AUART = 'ZZRW' OR ITAB-AUART = 'KE' OR
ITAB-AUART = 'KR' OR ITAB-AUART = 'ZCHP' OR
ITAB-AUART = 'ZPSO' OR ITAB-AUART = 'ZZNC'.
assign values to detail fields
CLEAR ITAB1.
ITAB1-KUNNR = ITAB-KUNNR.
ITAB1-KUNWE = ITAB-KUNWE.
ITAB1-VBELN = ITAB-VBELN.
ITAB1-POSNR = ITAB-POSNR.
IF ITAB-KURSK = 0.
ITAB-KURSK = 1.
ENDIF.
IF ITAB-KPEIN = 0.
ITAB-KPEIN = 1.
ENDIF.
select delivery qty for SO item and write to internal table
SELECT VBELV POSNV VBELN POSNN VBTYP_N RFMNG PLMIN
FROM VBFA INTO TABLE ITAB4
WHERE VBELV = ITAB-VBELN AND POSNV = ITAB-POSNR AND
( VBTYP_N = 'J' OR VBTYP_N = 'T' ).
calculate total delivery qty for SO item
DELV_QTY = 0.
DELV_QTY1 = 0.
LOOP AT ITAB4.
IF ITAB4-VBTYP_N = 'J' OR ( ITAB4-VBTYP_N = 'T' AND
ITAB-AUART = 'KR').
IF ITAB4-PLMIN = '-'.
ITAB4-RFMNG = ITAB4-RFMNG * -1.
ENDIF.
determine if delivery for SO item precedes delivery w/no goods
issue (to determine request date and qty)
CLEAR LIKP.
SELECT SINGLE ERDAT ERZET
FROM LIKP INTO (LIKP-ERDAT, LIKP-ERZET)
WHERE VBELN = ITAB4-VBELN.
IF LIKP-ERDAT < ITAB3-ERDAT OR ( LIKP-ERDAT = ITAB3-ERDAT
AND LIKP-ERZET < ITAB3-ERZET ).
DELV_QTY1 = DELV_QTY1 + ITAB4-RFMNG.
ENDIF.
DELV_QTY = DELV_QTY + ITAB4-RFMNG.
ENDIF.
ENDLOOP.
get request dates for SO item
REFRESH ITAB2B.
SELECT EDATU VBELN POSNR WMENG
FROM VBEP INTO TABLE ITAB2B
WHERE VBELN = ITAB-VBELN AND POSNR = ITAB-POSNR AND
WMENG <> 0.
select sched lines w/commit date and write to itab2c
REFRESH ITAB2C.
SELECT EDATU VBELN POSNR ROMS1
FROM VBEP INTO TABLE ITAB2C
WHERE VBELN = ITAB-VBELN AND POSNR = ITAB-POSNR AND
ROMS1 <> 0.
SORT ITAB2B BY EDATU.
SORT ITAB2C BY EDATU.
loop thru request dates and delete request date entries for
quantity(s) for preceding deliveries
REMAIN_QTY1 = DELV_QTY1.
LOOP AT ITAB2B.
IF ITAB2B-WMENG > REMAIN_QTY1.
ITAB2B-WMENG = ITAB2B-WMENG - REMAIN_QTY1.
MODIFY ITAB2B.
EXIT.
ELSEIF ITAB2B-WMENG = REMAIN_QTY1.
DELETE ITAB2B.
EXIT.
ELSE.
REMAIN_QTY1 = REMAIN_QTY1 - ITAB2B-WMENG.
DELETE ITAB2B.
ENDIF.
ENDLOOP.
loop thru commit dates and delete commit date entries for
quantity(s) for preceding deliveries
REMAIN_QTY2 = DELV_QTY1.
LOOP AT ITAB2C.
IF ITAB2C-ROMS1 > REMAIN_QTY2.
ITAB2C-ROMS1 = ITAB2C-ROMS1 - REMAIN_QTY2.
MODIFY ITAB2C.
EXIT.
ELSEIF ITAB2C-ROMS1 = REMAIN_QTY2.
DELETE ITAB2C.
EXIT.
ELSE.
REMAIN_QTY2 = REMAIN_QTY2 - ITAB2C-ROMS1.
DELETE ITAB2C.
ENDIF.
ENDLOOP.
if planned goods issue date is 0, put qty in non-confirmed
get request date for SO item
IF ITAB3-WADAT <> 0.
PERFORM GET_REQUEST_DATE TABLES ITAB2B
USING ITAB3-LFIMG REQ_DATE.
PERFORM GET_COMMIT_DATE TABLES ITAB2C
USING ITAB3-LFIMG COM_DATE.
ITAB1-ZDATE1 = REQ_DATE.
ITAB1-ZDATE2 = ITAB3-WADAT.
ITAB1-ZDATE3 = COM_DATE.
ITAB1-ZQTY1 = ITAB-KWMENG.
ITAB1-ZQTY2 = ITAB3-LFIMG.
ITAB1-ZDESC = 'delivery, no goods issue'.
ELSE.
PERFORM GET_REQUEST_DATE TABLES ITAB2B
USING ITAB3-LFIMG REQ_DATE.
PERFORM GET_COMMIT_DATE TABLES ITAB2C
USING ITAB3-LFIMG COM_DATE.
ITAB1-ZDATE1 = REQ_DATE.
ITAB1-ZDATE2 = '99991231'.
ITAB1-ZDATE3 = COM_DATE.
ITAB1-ZQTY1 = ITAB-KWMENG.
ITAB1-ZQTY2 = ITAB3-LFIMG.
ITAB1-ZDESC = 'delivery, no goods issue date'.
ENDIF.
calculate net value for backlog qty
ZPRICE = ( ITAB-NETPR / ITAB-KPEIN ) * ITAB-KURSK.
ITAB1-ZEXTD = ITAB1-ZQTY2 * ZPRICE.
if order type is consignment return (KR), reverse sign
IF ITAB-AUART = 'KR'.
ITAB1-ZQTY1 = ITAB1-ZQTY1 * -1.
ITAB1-ZQTY2 = ITAB1-ZQTY2 * -1.
ITAB1-ZEXTD = ITAB1-ZEXTD * -1.
ENDIF.
APPEND ITAB1.
ENDIF.
ENDIF.
ENDLOOP.
ENDFORM.
FORM 400_GET_PARTIAL_DELIVERY
get detail for SO items w/partial deliveries for document types
(ZZOR, ZZC1, ZZCO, ZZRP, ZZRW, KE, KR, ZCHP, ZPSO, ZZNC)
FORM 400_GET_PARTIAL_DELIVERY.
process SO items for selected order types
LOOP AT ITAB WHERE AUART = 'ZZOR' OR AUART = 'ZZC1' OR
AUART = 'ZZCO' OR AUART = 'ZZRP' OR AUART = 'ZZRW' OR
AUART = 'KE' OR AUART = 'KR' OR AUART = 'ZCHP' OR
AUART = 'ZPSO' OR AUART = 'ZZNC'.
select if delivery status = B (partially delivered)
IF ITAB-LFGSA = 'B'.
assign values to detail fields
CLEAR ITAB1.
ITAB1-KUNNR = ITAB-KUNNR.
ITAB1-KUNWE = ITAB-KUNWE.
ITAB1-VBELN = ITAB-VBELN.
ITAB1-POSNR = ITAB-POSNR.
IF ITAB-KURSK = 0.
ITAB-KURSK = 1.
ENDIF.
IF ITAB-KPEIN = 0.
ITAB-KPEIN = 1.
ENDIF.
select delivery qty for SO item and write to internal table
SELECT VBELV POSNV VBELN POSNN VBTYP_N RFMNG PLMIN
FROM VBFA INTO TABLE ITAB4
WHERE VBELV = ITAB-VBELN AND POSNV = ITAB-POSNR AND
( VBTYP_N = 'J' OR VBTYP_N = 'T' ).
calculate total delivery qty for SO item
DELV_QTY = 0.
LOOP AT ITAB4.
IF ITAB4-VBTYP_N = 'J' OR ( ITAB4-VBTYP_N = 'T' AND
ITAB-AUART = 'KR').
IF ITAB4-PLMIN = '-'.
ITAB4-RFMNG = ITAB4-RFMNG * -1.
ENDIF.
DELV_QTY = DELV_QTY + ITAB4-RFMNG.
ENDIF.
ENDLOOP.
select schedule lines for SO item and write to internal table
REFRESH ITAB2A.
SELECT WADAT VBELN POSNR WMENG BMENG
FROM VBEP INTO TABLE ITAB2A
WHERE VBELN = ITAB-VBELN AND POSNR = ITAB-POSNR.
get request dates from schedule line table
REFRESH ITAB2B.
SELECT EDATU VBELN POSNR WMENG
FROM VBEP INTO TABLE ITAB2B
WHERE VBELN = ITAB-VBELN AND POSNR = ITAB-POSNR AND
WMENG <> 0.
get commit dates from schedule line table
REFRESH ITAB2C.
SELECT EDATU VBELN POSNR ROMS1
FROM VBEP INTO TABLE ITAB2C
WHERE VBELN = ITAB-VBELN AND POSNR = ITAB-POSNR AND
ROMS1 <> 0.
SORT ITAB2B BY EDATU.
SORT ITAB2C BY EDATU.
SORT ITAB2A BY WADAT.
loop thru request dates and delete request date entries for
quantity(s) already delivered
REMAIN_QTY1 = DELV_QTY.
LOOP AT ITAB2B.
IF ITAB2B-WMENG > REMAIN_QTY1.
ITAB2B-WMENG = ITAB2B-WMENG - REMAIN_QTY1.
MODIFY ITAB2B.
EXIT.
ELSEIF ITAB2B-WMENG = REMAIN_QTY1.
DELETE ITAB2B.
EXIT.
ELSE.
REMAIN_QTY1 = REMAIN_QTY1 - ITAB2B-WMENG.
DELETE ITAB2B.
ENDIF.
ENDLOOP.
loop thru commit dates and delete request date entries for
quantity(s) already delivered
REMAIN_QTY2 = DELV_QTY.
LOOP AT ITAB2C.
IF ITAB2C-ROMS1 > REMAIN_QTY2.
ITAB2C-ROMS1 = ITAB2C-ROMS1 - REMAIN_QTY2.
MODIFY ITAB2C.
EXIT.
ELSEIF ITAB2C-ROMS1 = REMAIN_QTY2.
DELETE ITAB2C.
EXIT.
ELSE.
REMAIN_QTY2 = REMAIN_QTY2 - ITAB2C-ROMS1.
DELETE ITAB2C.
ENDIF.
ENDLOOP.
ORDR_QTY = 0.
CONF_QTY = 0.
NOCONF_QTY = 0.
calculate the unconfirmed qty for SO item
LOOP AT ITAB2A.
ORDR_QTY = ORDR_QTY + ITAB2A-WMENG.
CONF_QTY = CONF_QTY + ITAB2A-BMENG.
ENDLOOP.
NOCONF_QTY = ORDR_QTY - CONF_QTY.
NODELV_QTY = ORDR_QTY - DELV_QTY.
loop thru schedule lines and process entries with no related
delivery(s)
REMAIN_QTY = DELV_QTY.
LOOP AT ITAB2A.
IF ITAB2A-BMENG <> 0.
IF ITAB2A-BMENG <= REMAIN_QTY.
REMAIN_QTY = REMAIN_QTY - ITAB2A-BMENG.
ELSE.
ITAB2A-BMENG = ITAB2A-BMENG - REMAIN_QTY.
PERFORM GET_REQUEST_DATE TABLES ITAB2B
USING ITAB2A-BMENG REQ_DATE.
PERFORM GET_COMMIT_DATE TABLES ITAB2C
USING ITAB2A-BMENG COM_DATE.
ITAB1-ZDATE1 = REQ_DATE.
ITAB1-ZDATE2 = ITAB2A-WADAT.
ITAB1-ZDATE3 = COM_DATE.
ITAB1-ZQTY1 = ITAB-KWMENG.
ITAB1-ZQTY2 = ITAB2A-BMENG.
ITAB1-ZDESC = 'partial delivery'.
calculate net value for backlog qty
ZPRICE = ( ITAB-NETPR / ITAB-KPEIN ) * ITAB-KURSK.
ITAB1-ZEXTD = ITAB1-ZQTY2 * ZPRICE.
if order type is consignment return (KR), reverse sign
IF ITAB-AUART = 'KR'.
ITAB1-ZQTY1 = ITAB1-ZQTY1 * -1.
ITAB1-ZQTY2 = ITAB1-ZQTY2 * -1.
ITAB1-ZEXTD = ITAB1-ZEXTD * -1.
ENDIF.
APPEND ITAB1.
REMAIN_QTY = 0.
ENDIF.
ENDIF.
ENDLOOP.
if total unconfirmed >= total not delivered, qty is unconfirmed
IF NOCONF_QTY >= NODELV_QTY.
PERFORM GET_REQUEST_DATE TABLES ITAB2B
USING NODELV_QTY REQ_DATE.
PERFORM GET_COMMIT_DATE TABLES ITAB2C
USING NODELV_QTY COM_DATE.
ITAB1-ZDATE1 = REQ_DATE.
ITAB1-ZDATE2 = '99991231'.
ITAB1-ZDATE3 = COM_DATE.
ITAB1-ZQTY1 = ITAB-KWMENG.
ITAB1-ZQTY2 = NODELV_QTY.
ITAB1-ZDESC = 'partial delv, not confirmed'.
calculate net value for backlog qty
ZPRICE = ( ITAB-NETPR / ITAB-KPEIN ) * ITAB-KURSK.
ITAB1-ZEXTD = ITAB1-ZQTY2 * ZPRICE.
if order type is consignment return (KR), reverse sign
IF ITAB-AUART = 'KR'.
ITAB1-ZQTY1 = ITAB1-ZQTY1 * -1.
ITAB1-ZQTY2 = ITAB1-ZQTY2 * -1.
ITAB1-ZEXTD = ITAB1-ZEXTD * -1.
ENDIF.
APPEND ITAB1.
ENDIF.
ENDIF.
ENDLOOP.
ENDFORM.
FORM 500_GET_THIRD_PARTY
get detail for third party SO items
FORM 500_GET_THIRD_PARTY.
process SO items for selected order types
LOOP AT ITAB WHERE PSTYV = 'TAS' AND ( AUART = 'ZZOR' OR
AUART = 'ZZC1' OR AUART = 'ZZCO' OR AUART = 'ZZRP' OR
AUART = 'ZZRW' OR AUART = 'KE' OR AUART = 'KR' OR
AUART = 'ZCHP' OR AUART = 'ZPSO' OR AUART = 'ZZNC' ).
select if billing status <> C (billed)
IF ITAB-FKSAA <> 'C'.
assign values to detail fields
CLEAR ITAB1.
ITAB1-KUNNR = ITAB-KUNNR.
ITAB1-KUNWE = ITAB-KUNWE.
ITAB1-VBELN = ITAB-VBELN.
ITAB1-POSNR = ITAB-POSNR.
IF ITAB-KURSK = 0.
ITAB-KURSK = 1.
ENDIF.
IF ITAB-KPEIN = 0.
ITAB-KPEIN = 1.
ENDIF.
get request dates from schedule line table
REFRESH ITAB2B.
SELECT EDATU VBELN POSNR WMENG
FROM VBEP INTO TABLE ITAB2B
WHERE VBELN = ITAB-VBELN AND POSNR = ITAB-POSNR AND
WMENG <> 0.
get commit dates from schedule line table
REFRESH ITAB2C.
SELECT EDATU VBELN POSNR ROMS1
FROM VBEP INTO TABLE ITAB2C
WHERE VBELN = ITAB-VBELN AND POSNR = ITAB-POSNR AND
ROMS1 <> 0.
SORT ITAB2B BY EDATU.
SORT ITAB2C BY EDATU.
get PO number(s) for SO item and write to internal table
REFRESH ITAB4.
SELECT VBELV POSNV VBELN POSNN VBTYP_N RFMNG PLMIN
FROM VBFA INTO TABLE ITAB4
WHERE VBELV = ITAB-VBELN AND POSNV = ITAB-POSNR AND
VBTYP_N = 'V' AND RFMNG <> 0.
calculate total delivery qty for PO item
DELV_QTY = 0.
LOOP AT ITAB4.
IF ITAB4-PLMIN = '-'.
ITAB4-RFMNG = ITAB4-RFMNG * -1.
ENDIF.
DELV_QTY = DELV_QTY + ITAB4-RFMNG.
ENDLOOP.
loop thru PO's for SO item
LOOP AT ITAB4.
select delivery lines for PO item
SELECT EINDT EBELN EBELP MENGE FROM EKET
INTO (EKET-EINDT, EKET-EBELN, EKET-EBELP, EKET-MENGE)
WHERE EBELN = ITAB4-VBELN AND EBELP = ITAB4-POSNN.
PERFORM GET_REQUEST_DATE TABLES ITAB2B
USING EKET-MENGE REQ_DATE.
PERFORM GET_COMMIT_DATE TABLES ITAB2C
USING EKET-MENGE COM_DATE.
ITAB1-ZDATE1 = REQ_DATE.
ITAB1-ZDATE2 = EKET-EINDT.
ITAB1-ZDATE3 = COM_DATE.
ITAB1-ZQTY1 = ITAB-KWMENG.
ITAB1-ZQTY2 = EKET-MENGE.
ITAB1-ZDESC = '3rd party item'.
calculate net value for backlog qty
ZPRICE = ( ITAB-NETPR / ITAB-KPEIN ) * ITAB-KURSK.
ITAB1-ZEXTD = ITAB1-ZQTY2 * ZPRICE.
APPEND ITAB1.
ENDSELECT.
ENDLOOP.
if total delivery qty < order qty, put remaining in non-confirmed
IF DELV_QTY < ITAB-KWMENG.
THIRD_QTY = ITAB-KWMENG - DELV_QTY.
PERFORM GET_REQUEST_DATE TABLES ITAB2B
USING THIRD_QTY REQ_DATE.
PERFORM GET_COMMIT_DATE TABLES ITAB2C
USING THIRD_QTY COM_DATE.
ITAB1-ZDATE1 = REQ_DATE.
ITAB1-ZDATE2 = '99991231'.
ITAB1-ZDATE2 = COM_DATE.
ITAB1-ZQTY1 = ITAB-KWMENG.
ITAB1-ZQTY2 = THIRD_QTY.
ITAB1-ZDESC = '3rd party item, no PO'.
calculate net value for backlog qty
ZPRICE = ( ITAB-NETPR / ITAB-KPEIN ) * ITAB-KURSK.
ITAB1-ZEXTD = ITAB1-ZQTY2 * ZPRICE.
APPEND ITAB1.
CONTINUE.
ENDIF.
ENDIF.
ENDLOOP.
ENDFORM.
FORM 900_CREATE_LIST
process open business detail and create list
FORM 900_CREATE_LIST.
if internal table is empty, write message and exit
DESCRIBE TABLE ITAB1 LINES ZCNTR.
IF ZCNTR = 0.
WRITE: / 'No Data Found for Selection'.
STOP.
ENDIF.
SORT ITAB1 BY KUNNR KUNWE VBELN POSNR.
loop thru sorted table and create list
LOOP AT ITAB1.
IF ITAB1-ZDATE1 = SPACE.
ITAB1-ZDATE1 = '99991231'.
ENDIF.
IF ITAB1-ZDATE3 = SPACE.
ITAB1-ZDATE3 = '99991231'.
ENDIF.
get SO item detail
CLEAR ITAB.
READ TABLE ITAB WITH KEY VBELN = ITAB1-VBELN
POSNR = ITAB1-POSNR BINARY SEARCH.
print sold-to and ship-to customer header info
AT NEW KUNWE.
CLEAR KNA1.
SELECT SINGLE NAME1 FROM KNA1 INTO KNA1-NAME1
WHERE KUNNR = ITAB1-KUNNR.
CONCATENATE ITAB-ORT01 ITAB-REGIO INTO ADRS1 SEPARATED BY ', '.
CONCATENATE ADRS1 ITAB-LAND1 INTO ADRS2 SEPARATED BY ' '.
CONCATENATE ITAB-NAME1 ADRS2 INTO ADRS3 SEPARATED BY ' '.
FORMAT COLOR 1 INTENSIFIED OFF.
WRITE: /1 'Sold-to:', 10 ITAB1-KUNNR, 18 KNA1-NAME1,
56 'Ship-to:', 65 ITAB1-KUNWE, 73 ADRS3.
FORMAT RESET.
SKIP.
ENDAT.
print out backlog detail
CLEAR T171T.
SELECT SINGLE BZTXT FROM T171T INTO T171T-BZTXT
WHERE SPRAS = SY-LANGU AND BZIRK = ITAB-BZIRK.
WRITE: /1 ITAB1-VBELN,
13(6) ITAB1-POSNR NO-ZERO,
21 ITAB-MATNR,
41 ITAB-ARKTX,
83 ITAB1-ZDATE1,
95 ITAB1-ZDATE3,
107 ITAB1-ZDATE2,
119 ITAB-ERNAM,
129 ITAB-BZIRK, 135 T171T-BZTXT,
157(20) ITAB-BSTKD,
179(12) ITAB1-ZQTY1 DECIMALS 0,
193(12) ITAB1-ZQTY2 DECIMALS 0,
207(16) ITAB1-ZEXTD DECIMALS 2,
225 ITAB1-ZDESC.
AT END OF VBELN.
SKIP.
ENDAT.
print footing at ship-to customer
AT END OF KUNWE.
SUM.
ULINE: /193(12), 207(16).
FORMAT COLOR 1 INTENSIFIED OFF.
WRITE: /1 'Total: Sold-to:', 18 ITAB1-KUNNR,
25 '/', 27 'Ship-to:', 36 ITAB1-KUNWE,
193(12) ITAB1-ZQTY2 DECIMALS 0,
207(16) ITAB1-ZEXTD DECIMALS 2.
FORMAT RESET.
SKIP 2.
ENDAT.
AT LAST.
SUM.
ULINE: /193(12), 207(16).
FORMAT COLOR 1 INTENSIFIED ON.
WRITE: /1 'Report Total:',
193(12) ITAB1-ZQTY2 DECIMALS 0,
207(16) ITAB1-ZEXTD DECIMALS 2.
FORMAT RESET.
ENDAT.
ENDLOOP.
ENDFORM.
FORM GET_REQUEST_DATE
subroutine to get request date for SO item
FORM GET_REQUEST_DATE TABLES FTAB STRUCTURE ITAB2B
USING CONF_QTY REQ_DATE.
DATA: REMAIN LIKE VBEP-WMENG, "qty remaining
CNTR TYPE I, "loop counter
TAB_INDEX TYPE I. "table index
initialize
REMAIN = 0.
REQ_DATE = SPACE.
get first request date from table
TAB_INDEX = 1.
READ TABLE FTAB INDEX TAB_INDEX.
if request date not found, set request date to blank
IF SY-SUBRC <> 0.
REQ_DATE = SPACE.
EXIT.
ELSE.
REQ_DATE = FTAB-EDATU.
ENDIF.
calculate quantity remaining for request date
REMAIN = FTAB-WMENG - CONF_QTY.
if qty remaining > 0, update request date with qty remaining
IF REMAIN > 0.
FTAB-WMENG = REMAIN.
MODIFY FTAB INDEX TAB_INDEX.
if qty remaining = 0, delete request date (so next request
date will be used for next confirmed qty)
ELSEIF REMAIN = 0.
DELETE FTAB INDEX TAB_INDEX.
if qty remaining < 0, find next request date and update
ELSE.
CNTR = 0.
WHILE REMAIN < 0 OR CNTR < 10.
DELETE FTAB INDEX TAB_INDEX.
TAB_INDEX = TAB_INDEX + 1.
READ TABLE FTAB INDEX TAB_INDEX.
REMAIN = REMAIN + FTAB-WMENG.
CNTR = CNTR + 1.
ENDWHILE.
IF REMAIN = 0.
DELETE FTAB INDEX TAB_INDEX.
ELSEIF REMAIN > 0.
FTAB-WMENG = REMAIN.
MODIFY FTAB INDEX TAB_INDEX.
ENDIF.
ENDIF.
ENDFORM.
FORM GET_COMMIT_DATE
subroutine to get commit date for SO item
FORM GET_COMMIT_DATE TABLES CTAB STRUCTURE ITAB2C
USING CONF_QTY COM_DATE.
DATA: REMAIN LIKE VBEP-WMENG, "qty remaining
CNTR TYPE I, "loop counter
TAB_INDEX TYPE I. "table index
initialize
REMAIN = 0.
COM_DATE = SPACE.
get first commit date from table
TAB_INDEX = 1.
READ TABLE CTAB INDEX TAB_INDEX.
if request date not found, set request date to blank
IF SY-SUBRC <> 0.
COM_DATE = SPACE.
EXIT.
ELSE.
COM_DATE = CTAB-EDATU.
ENDIF.
calculate quantity remaining for request date
REMAIN = CTAB-ROMS1 - CONF_QTY.
if qty remaining > 0, update request date with qty remaining
IF REMAIN > 0.
CTAB-ROMS1 = REMAIN.
MODIFY CTAB INDEX TAB_INDEX.
if qty remaining = 0, delete request date (so next request
date will be used for next confirmed qty)
ELSEIF REMAIN = 0.
DELETE CTAB INDEX TAB_INDEX.
if qty remaining < 0, find next request date and update
ELSE.
CNTR = 0.
WHILE REMAIN < 0 OR CNTR < 10.
DELETE CTAB INDEX TAB_INDEX.
TAB_INDEX = TAB_INDEX + 1.
READ TABLE CTAB INDEX TAB_INDEX.
REMAIN = REMAIN + CTAB-ROMS1.
CNTR = CNTR + 1.
ENDWHILE.
IF REMAIN = 0.
DELETE CTAB INDEX TAB_INDEX.
ELSEIF REMAIN > 0.
CTAB-ROMS1 = REMAIN.
MODIFY CTAB INDEX TAB_INDEX.
ENDIF.
ENDIF.
ENDFORM.
END-OF-REPORT. -
How to find open orders with amount and open deliveries?
Hi All,
I want to find out the open orders with open amount and open deliveries for a particular customer.
We need this for credit check purpose.
Kindly guide us for this.
Regards,
Satish.Hi,
To find out open order:
data: c_bef_pgi(1) TYPE c VALUE 'A',
RANGES: rg_wbstk FOR vbuk-wbstk."range for wbstk
rg_wbstk-sign = 'I'.
rg_wbstk-option = 'EQ'.
rg_wbstk-low = 'C'.
APPEND rg_wbstk.
rg_wbstk-low = 'A'.
APPEND rg_wbstk.
1.first put query on vbak table
2.Put query on vbuk table as
SELECT vbeln bestk lfstk gbstk FROM vbuk
INTO TABLE it_vbuk_open
FOR ALL ENTRIES IN it_vbak
WHERE vbeln = it_vbak-vbeln AND
bestk IN rg_wbstk AND
lfstk = c_bef_pgi.
so this wil give u open orders.
3. Then according to vbuk, get the details from vbap.
To find open delivery
1. First put query on vbak table
2. Put query on vbfa as
SELECT vbelv posnv vbeln posnn vbtyp_n vbtyp_v FROM vbfa
INTO TABLE it_vbfa
FOR ALL ENTRIES IN it_vbak
WHERE vbelv = it_vbak-vbeln AND
vbtyp_n = 'J' AND
vbtyp_v = 'C'.
3.Then from VBfa,get the details from LIkp
4.Then put entry on vbuk as
*entries from vbuk
SELECT vbeln wbstk fkstk gbstk FROM vbuk
INTO TABLE it_vbuk_del
FOR ALL ENTRIES IN it_likp
WHERE vbeln = it_likp-vbeln AND
wbstk IN rg_wbstk AND
fkstk = c_bef_pgi.
Thanks & Regards,
Anagha Deshmukh -
Reminder for open Orders of Costumer who made a New order
Hello Experts
When adding a new Order to costumer, I want a Reminder or a Pop-up Block/notice That will tell me if this Costumer already have open orders in the system.
And this for the reason of merging or combining a few orders together into one package for same costumer.
Sometimes orders shipped out without notice that another order had shipped a day before to same costumer.
Is it possible to make this kind of pop-up/block/Reminder?
Is it possible to make this reminder written in the Order Document edit?
Thank you very much for your help.
D.Medalion
sorry for some wording mistakes - English is not my native language.Dear Heather,
Thanks for trying to help me with my problem.
I am familliar with Pick & Pack and it does'nt sutible for our company. maybe in the future, but for now; the inventory quantities are not always 100% correct in our SAP records (We are a small company and still not perfect) whice causes some issues with this Manager (because it's always rely on Available qty).
But thanks again for suggesting it.
About your question: In my company, a Sales order is being made by the Clerk, Then sent to the Stocker to Pick the package, after full Packing of the pallet, the stocker notify the clerk. then the Clerk is able to produce an A/R Invoice and arrange shipping.
The problem happening when one order is being packed and put a side for waiting shipment. then another order for the same Client is being proccessed, the Stocker pick it up, and pack it. this causes a cituation of two diffrent packages for same client.
The first package could sent out during the picking of the other one or even an Hour before. it's the same principle. eventually there are two shipping cost for us. instead of pack it all together in same pallet.
I would like to create a FMS query (as gordon suggest me) to triger inside the Order form, during the adding new order. and putting the clients name. it will triger a note or warning on a rubric i choose.
IF [Cardcode] has open orders THEN note "Attention - client have open orders!" , ELSE do nothing.
I'm sorry for the non proffesional wording of the query, but this is the general idea that i have.
Maybe Heather , you could help me formulate this query.
Thanks a lot.
D.Medalion -
Report to show open orders and valuation type
Hi,
Is there a report in SAP that shows the open orders and the valuation type of the materials in those orders?
thanksHi jay,
What is the definition of Open orders according to your company?
Is it Sales orders created but not delivered? or
Is it Delivery created for the Sales order but not done PGI? or
Is it Sales orders but not billed?
Accordingly you must decide. Just VA05 will give list of orders where you can take from the Status updation whether it is delivered or not. But apart from that, if you need any report relating to Open orders, you need to develop a Z report which will help your company. Just ask your business user how he wants. Based on that you can decide.
Thanks and regards.
Augustine Ponraj -
Open Orders and blocked deliveries
Hi,
We have different blocks in Deliveries. The requirements is deliveries which are blocked i.e delivery created but no picking and PGI happened,should be visible as open orders as they will take the total quantity required for the open orders for production planning and other reports.
How to do this?
If any customized report to be prepared, how can we check that the order will be going for a block due to credit?
Regards,
AjitDear Ajit
You can see a standard report VL21 in which all deliveries created but not PGId will be displayed. For the status of the delivery, you can check in LIKP table.
thanks
G. Lakshmipathi -
Is ther a FM to get the open order qty for a particular material &salesorg?
Hi experts,
I have requirement to find the open order qty for a given sales org (plant will be even better ) and material in my report. I do not want to use the standard tables as i need to fetch all records without any time restriction.So it is takin a lot of time.
I know i can find it in va05 but i want to know if ther is some standard function module which can serve this purpose.
Kindly help.
regards
AshwinThanks for the reply,
Can you kindly elaborate what i need to pass to the function module ?
What do I have to pass in the tables LVBMTV and LSELTAB ?
In which field will i get the open quantity for the material and salesorg ?
Kindly help,
Regards
Ashwin
Maybe you are looking for
-
Update for RDP 8.1 Windows 7 SP1 changed explorer right click context menu
I have a 4 pcs and 3 nas drive on my network. previous to the update I could view my pcs and nas drives in explorers right pane left click one and access the folders on it. since the update I can no longer do this because "remotedesktopconnection"
-
My ipad has gone into recovery mode after an "error occured" whilst trying to update it. Will it come out of recovery on it's own? There is a lot of data I want to save before restoring it to factory settings
-
CO-PA Report: Incorrect Drill-Down to Line Item Report result (KE32 / KE34)
Hi There We have created a CO-PA report and assigned the ability to call up the CO-PA Line Item report (KE24). When we drill-down from a cell within the report for an actual amount for a specific period, the line item report displays the line-items f
-
Thumbnails missing from DNG files in Finder
I have been converting Canon CR2 files to DNG files for archiving using Adobe DNG Converter 8.1. Conversion completed without issue and the files located in the appropriate folder on an external hard drive. Checking the folder I found the DNG files s
-
Export And Import Agreements in B2B 11g (After renaming)
Hi All I am aware about the process to Export and Import the B2B agreements in Oracle B2B 11g. But, I want to export an agreement, rename the agreement name, Channel Name, Trading Partner name and re-import in the same instance. For e.g. If I have an