MMBE stock overview - S Loc Level stock not getting displayed - ECC 6 0

Hello,
In ECC 6,0 Version, in the MMBE (stock overview) stock is getting displayed only at the Plant level. It is not showing at levels below for eg. S Loc level/Valuation type level. Is there any setting to be activated for this?
Can any one throw some light?
Thanks
Regards
Kumaran

Hi
Before executing MMBE
have you selected on the initial screen the following :-
Selection of Display levels
COCD
Plant
Storage location
batch and
special stock
thanks
Prasanna
awrd if usefull

Similar Messages

G/L Account mentioned on line level does not get hit in Journal entry on GRPO and AP Invoice in SAP B1 9.0 PL - 11

Hi,
G/L Account mentioned on line level does not get hit in Journal entry on GRPO and AP Invoice in SAP B1 9.0 PL - 11
I am creating an independent AP Invoice, there are two issues:
1. On line level G/L Account field is not open for selection
2. I have then selected and updated the account on Form Settings. Same account gets updated on line level.
In Journal Entry selected G/L account on line level shall be hitted. But it does not put any effect on JE. Accounting is set by Warehouse. It picks up accounts from warehouse only.
Need help its urgent.
Thanks in advance.

Invoice is Item Type.
G/L Accounts are set by Warehouse. But if explicitly we are want to change the account on line level in that case, it is not getting reflected in Journal entry. On AR Invoice same scenario works perfectly. On line level I can change the accounts explicitly and have the effect on Journal entries.
Issue seems to be on AP side only.
As required please find attached the screen shots.
JEwith mapped GL Account on Warehouse
JEwith different GL Account on line Level via Form Settings
Thanks & Regards
Sonil

MD06 Issue - Planned orders not getting displayed

Hello,
Planned order with the exception "Newly created order proposal" does not get displayed in MD06 with the option "Only Unprocessed MRP Lists" in the processing indicator.
I am running MD06 report with the following parameters:
Plant
MRP Controller
Exeception Group - All exception selected except 8-Terminations
Processing indicator - Only unprocessed MRP LIsts, Only with new exceptions
My material which has a newly created planned order thorugh MRP run with exception "1 - Newly created order proposal" does not get displayed.
Only when I specify Only processed MRP lists or All MRP LIst in the processing indicator, this material gets displayed. The planned order is for a Stock Transfer order to this plant (receiving plant). How is the MRP LIst processed?
Please help me out with this issue.
Sincerely,
Ketan

Hi Ketan,
When you execute the MD06 report, you would find a column with the heading CI, if am right it would be just after the MRP cntlr, here you would find a Pencil & a tick mark. If you find them both, it means the row is unprocessed, but if you find only a tick mark it means that the row is processed.
So now check for the planned order, it would be just a tick mark & hence would be showing only for the processed MRP list or all MRP lists.
To process a row or unprocess, just click on the icon & it changes.
Check & revert if it answers your query.
Regards,
Vivek

Problem in BADI, error message not getting displayed

Hello Experts,
I am facing a strange problem in BADI.
The requirement is that the user should not be allowed to change the plant field
on the screen of standard MM transctions for PO/PR amendment.
I have written the code in separate BADIs for PO and PR.
I am displaying an error message if the user tries to change the field.
For PO, it is working fine.But for PR, the same code is not working.
The control is going over to the BADI for PR and rest of the code is working fine.
But the error message is not getting displayed for PR amendment.
Can anybody please suggest the possible cause of problem and some solution to it.
Thanks in advance.

Hi
See the sample BADI code for PR which raises an exceptions and do accordingly
BAdI Name: ZPUR_RFQ (Implementation name) Purchase Requisitions
Definition Name: ME_REQ_POSTED
Interface Name : IF_EX_ME_REQ_POSTED
Implementing Class: ZCL_IM_PUR_REQ
Method :            POSTED
METHOD if_ex_me_req_posted~posted .
DATA : v_mtart TYPE mtart.
DATA l_s_eban TYPE ueban.
LOOP AT im_eban INTO l_s_eban.
    IF l_s_eban-estkz NE 'B'.
      CLEAR v_mtart.
      SELECT SINGLE mtart INTO v_mtart FROM mara WHERE matnr = l_s_eban-matnr.
      IF v_mtart EQ 'ZERS' OR v_mtart EQ 'FHMI' OR v_mtart EQ 'UNBW'.
        MESSAGE e000(zm_msg) WITH 'You are not allowed' 'to create PR for stock items'.
      ENDIF.
    ENDIF.
    IF l_s_eban-knttp NE 'F' OR l_s_eban-pstyp NE '9'.
      IF l_s_eban-knttp NE 'A'.
        IF ( l_s_eban-pstyp NE '9' AND l_s_eban-pstyp NE 'D' )
           AND l_s_eban-matnr EQ space.
          MESSAGE e000(zm_msg) WITH 'You cannot create'
            'a PR without material number'.
        ENDIF.
      ENDIF.
    ENDIF.
ENDLOOP.
ENDMETHOD.
<b>Reward points for useful Answers</b>
Regards
Anji

Condition tab in STO is not getting displayed

Hi,
While creating STO, the Condition tab in Line Item is not getting displayed.
Why it is not getting displayed? Where do I need to change the configuration?
Do I need to maintain any Pricing Procedure in MM?
Please guide.
Regards,
PK

Hi,
Check whether you have maintained Schema determination for respective document type and STO.
below mentioned is the navigation path to maintain the same.
> spro - materials management - purchasing - conditions - define price determination process - define schema determination - Determine Schema for Stock Transport Orders
Here maintain the Purchasing Schema group , Document type & pricing procedure for STO.
Standard Pricing procedure for STO is RM2000.
Hope this is helpful..
Regards,
Vamshi

Material cost not getting displayed in CN41N

Hi Gurus,
When we execute CN41N, Materials assigned to the Network activity are visible but the cost of each material is not getting displayed against it (under Proj. Cost Plan Column) and it is appearing as '0' whereas, it is appearing as an accumulated cost against the activity. I checked SAP notes for this problem, though I could see some notes which are very close to the problem but all are for Release 600 whereas we are using 604 (ECC 6.0). Have anyone encountered such problems or whether the cost will not appear against Material in CN41N.
Awaiting your valuable suggestions.
thanks in advance.
Vinodh

I have seen planned cost of material against material itself in structure report like CN41, CN41N under following conditions:-
1. Valuated Project Stock
2. Material is created using Reservation for WBS or PR+Res for WBS Procurement indicators.
3. Costing relevancy box ticked for material
4. Statistical Cost element exists for Inventory account.
I have not seen planned cost for non-stock item or material with res for network in project. This is purely based on my experience and I dont have any notes or help document to validate my statement.

Data is not getting displayed in the report from an Infoset.

Hi All,
I am having a report based on an infoset. This report is displaying the data in the Dev. envmt. When it is transported to the QA, it is not displaying the data in the BEx as well as RSRT, in the QA envmt. The patch levels of both the Dev. and QA are the same. The Queries are same in the Dev and QA also.
While trying to display the data from the infoset (rt.click- display data), i am able to view the data, in the QA.
Could anyone please suggest why the data is not getting displayed in the query designer.
Thanks & Regards,
A.V.N.Rao

Hi Ashish,
I ran the "ZPS/!ZPS" in RSRT where ZPS is the infoset name. In Dev, it displayed the values. In QA, it displayed the below messages:
ECharacteristic 0TCAKYFNM does not exist. Check authorizations
WThere are calculated elements. These results are bracketed [ ]
and below that, it displayed the values for Number of records. But, it has not displayed the values for the other figures.
Does this has any impact in QA.
Thanks & Regards,
AVN Rao.

Default Value is not getting displayed in SUN ONE Ldap

Hello,
I have created an attribute in slapd.user_at.conf and it is associated in slapd.user_oc.conf.
The attribute default value is given through SUN ONE Console. But, In our application the default value is not getting displayed.
We need the default value to run our applicatin. Can anyone help me for this issue
Regards,
K. Senthil Kumar

Hi anandkumar,
I belive this issue can be resolved by changing the Query proprties for the perticular field.
Kindly check the Field proerties in query designer and ensure that Text is enabled ather than Key.
__Field property check up:__Go to query designer->click onn the field-> Right hand side in properties click on display tab-> select Text in drop down menu of Display as tab.
FURTHER CHECK UP: check the master data avaiulability for the perticular info object, if masterdata is not available, do the text data for txt data availability in report level.
Hope this helps you!!
Best Regards,
Maruthi

PF No. Not getting displayed in payslip

Dear All,
The PF No. is not getting displayed in the payslip. In pe51 transaction for the form created under Single fields i can see the table maintained as p0587as Table and Table field as EEPFM. The master data is maintained for this employees in IT 0587 and the dates are also maintained correctly but this specific data of PF number is not reflecting in cluster tables. PC00_m40_clstr - > EPF table.
In EPF table i can see the trust ID but the PF number is not getting displayed..
Could anyone of you suggest how to proceed further..
Regards,
Srikanth

Hi Rohith,
Thanks for your response. We are currently on ECC 604 and SP Level 45.
As mentioned earlier here the issue is with PF number. As far as Pan # is concerned we don't have any issue.
The PF number is not getting read in the payroll log itself however it is reading Trust ID field. The data is maintained in IT 0587 for all employees and in PE51 both table and table field are mapped correctly for Provident Fund number Single field. Could anyone suggest and let us know why the PF number is not getting fetched in the payroll log..
Regards,
Srikanth

Values not getting displayed for members which doesnt have parents

Hi
I created a product dimension with 4 levels .For members which doesnt have parents,data is not getting displayed in JavaClient.
The values for members which doesnt have parents are getting displayed in the view created for the measures which are dimensioned by Product .I mapped the same view in the CWM2 work space ,but value is not getting displayed for members which doesnt have parents ,but values are getting displayed for members which have parents for measures.
Is it a bug , we were able to do it in Express ..
Can anybody help us in doing this.??
Thnx in Advance......

Hi,
This assumes that the members which do not have parents are mapped to the top level in the hierarchy. If they are at a level below the top level then they are not part of the hierarchy and therefore would not be displayed. So this sounds like expected behaviour.
Hope this helps
BI Beans PM Team
Oracle

SAP Fields not getting displayed on the BDT screen

Hello Gurus,
I am trying to add 2 custom fields on to the claims management screen. The following steps were followed to add 2 fields on to the claims Management subclaim screen.
1. Create a field group Zxxxxx1 with the two fields attached to it as input enabled.
2. Create a View Zxxxxx2 attach the created field group Zxxxxx1, then create a subscreen screen add two fields to the screen and make them as input enabled. Then attached the subscreen to the View.
3. Create a PBO and PAI function modules for the screen and attach it to the View Zxxxxx2.
4. Create a section Zxxxxx3 and attach the view Zxxxxx2 to the section.
5. Attach the section to the Subclaim Overview Screen.
6. Inspite of doing all the above steps the screen is not getting displayed or the Function module PAI / PBO / FMOD is not being called.
Since I am attaching the section to a standard screen sequence I am not doing any modification to the screen sequence and screen sequence catagory.
Kindly let me know the steps I am missing in the configration of 2 new fields via BDT.
Reagrds,
Shiva

Hi Shiva,
did you create your own Z BDT application? Is it set to be active?
I have no access to any claims management system: Does the claim object support divisibility? If so, have you assigned the correct data set in your view?
Also, if you have your own Z BDT application and the claim object does support divisibility, did you assign the Z application to the divisibility view?
Regards,
Frank
Message was edited by: Frank Vieregge

QS41_Code are not getting displayed

Dear Experts,
Scenario is,
1.     T-Code QS41
2.     Under code groups (of any catalogue) certain codes have been created.
3.     The same entries can be viewed through tables QPCT and QPCD.
4.     Unfortunately we could not see the codes in transaction code QS41, QS42 and QS43.
5.     We checked for authorization related object. But in spite of full authorization codes are not getting displayed.
6.     The message that we got is No entries found that match selection criteria Message no. SV004
Few more inputs,
u2022     Recently patch SPKE500053 for HCM module has been updated in system. Earlier level was SPKE500043.
u2022     Patch SAPKB64021 was updated for BASIS / BW/ ABAP. Earlier level was SAPKB64020.
We are worried that because of these patch upload are we facing this issue? Or else kindly let us know if another solution can be applied
Best Regards,
Anand Rao

Hello Anand
I think that is the sap note to be implemented. i had also come across same issue but do not remember the OSS note number
please look into the below link also for reference
Link: [http://www.sapfans.com/forums/viewtopic.php?f=7&t=316640]
Regards
Gajesh

First Cell value in the first row of the structure not getting displayed

Hi Friends,
We've got one structure at rows level, there as per our requirement i've taken around 12 "New Selections", that's ok i'm getting everthing fine, but whatever the new selection i put on the top of that structure in that, the First Cell Value for the first column not getting displayed...
I'm really wondering, this is the first time that i'm facing this kind of problem... what might be the reason & what is the solution for that...
just awaiting for your inputs...
Regards,
Balaji Reddy K.

There is no declarative way to do this as the table rows are stamped. This means there is no way to can access a value like (row+1).attributename
So there is some coding needed. Check http://lucbors.blogspot.de/2012/02/adf-11g-fancy-master-detail-or-how-to.html and http://lucbors.blogspot.de/2012/02/adf-11g-even-fancier-multi-master-multi.html which might help you to implement your case.
Timo

Total is not getting displayed in the ALV output.

Hi,
Total is not getting displayed in the ALV output.
I m using :REUSE_ALV_BLOCK_LIST_APPEND & REUSE_ALV_BLOCK_LIST_DISPLAY
Are there any issues with it as the same settings are working fine with REUSE_ALV_LIST_DISPLAY
source code:
DATA: layout TYPE slis_layout_alv,
      IT_eventS TYPE slis_t_event,
      fcat   TYPE slis_t_fieldcat_alv WITH HEADER LINE,
      rec_fcat TYPE slis_t_fieldcat_alv WITH HEADER LINE.
TYPES: BEGIN OF ty_tab,
      belnr TYPE dberchz-belnr,
      belzart TYPE dberchz-belzart,
      net TYPE dberchz-nettobtr,
      END OF ty_tab.
DATA: lt_tab TYPE STANDARD TABLE OF ty_tab.
SELECT belnr belzart nettobtr
FROM dberchz
INTO TABLE lt_tab[]
WHERE belnr eq '000000000001'.
if sy-subrc ne 0.
ENDIF.
* defining layout
layout-colwidth_optimize = 'X'.
layout-def_status = 'X'.
*defning event
*event
*defining field catalog
fcat-col_pos = 1.
fcat-fieldname = 'BELNR'.
fcat-tabname = 'LT_TAB'.
APPEND fcat.
fcat-col_pos = 2.
fcat-fieldname = 'BELZART'.
fcat-tabname = 'LT_TAB'.
APPEND fcat.
fcat-col_pos = 3.
fcat-fieldname = 'NET'.
fcat-tabname = 'LT_TAB'.
fcat-do_sum = 'X'.
APPEND fcat.
*calling alv
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_INIT'
EXPORTING
    i_callback_program             = 'YZ_PLR'
*   I_CALLBACK_PF_STATUS_SET       = ' '
*   I_CALLBACK_USER_COMMAND        = ' '
*   IT_EXCLUDING                   =
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_APPEND'
EXPORTING
    is_layout                        = layout
    it_fieldcat                      = fcat[]
    i_tabname                        = 'LT_TAB'
    it_events                        = IT_EVENTS[]
*   IT_SORT                          =
*   I_TEXT                           = ' '
tables
    t_outtab                         = lt_tab[]
* EXCEPTIONS
*   PROGRAM_ERROR                    = 1
*   MAXIMUM_OF_APPENDS_REACHED       = 2
*   OTHERS                           = 3
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_DISPLAY'
Thanks,
Gaurav

Hi
No I don't think, this is my code (based on your code) and it works fine:
TYPE-POOLS SLIS.
DATA: BEGIN OF LT_TAB OCCURS 0,
       BELNR LIKE BSEG-BELNR,
       GJAHR LIKE BSEG-GJAHR,
       WRBTR LIKE BSEG-WRBTR,
       WAERS LIKE BKPF-WAERS,
      END OF LT_TAB.
DATA: LAYOUT     TYPE SLIS_LAYOUT_ALV,
      IT_EVENTS TYPE SLIS_T_EVENT,
      FCAT       TYPE SLIS_T_FIELDCAT_ALV WITH HEADER LINE,
      REC_FCAT   TYPE SLIS_T_FIELDCAT_ALV WITH HEADER LINE.
START-OF-SELECTION.
FCAT-COL_POS       = 1.
FCAT-FIELDNAME     = 'BELNR'.
FCAT-TABNAME       = 'LT_TAB'.
FCAT-REF_FIELDNAME = 'BELNR'.
FCAT-REF_TABNAME   = 'BSEG'.
APPEND FCAT.
FCAT-COL_POS       = 2.
FCAT-FIELDNAME     = 'GJAHR'.
FCAT-TABNAME       = 'LT_TAB'.
FCAT-REF_FIELDNAME = 'GJAHR'.
FCAT-REF_TABNAME   = 'BSEG'.
APPEND FCAT.
FCAT-COL_POS       = 3.
FCAT-FIELDNAME     = 'WRBTR'.
FCAT-TABNAME       = 'LT_TAB'.
FCAT-CFIELDNAME    = 'WAERS'.
FCAT-REF_FIELDNAME = 'WRBTR'.
FCAT-REF_TABNAME   = 'BSEG'.
FCAT-DO_SUM        = 'X'.
APPEND FCAT.
FCAT-COL_POS       = 4.
FCAT-FIELDNAME     = 'WAERS'.
FCAT-TABNAME       = 'LT_TAB'.
FCAT-REF_FIELDNAME = 'WAERS'.
FCAT-REF_TABNAME   = 'BKPF'.
FCAT-DO_SUM        = SPACE.
APPEND FCAT.
SELECT * FROM BSEG INTO CORRESPONDING FIELDS OF TABLE LT_TAB
    WHERE BUKRS = 'MAAB'
      AND BELNR = '0000000001'.
LT_TAB-WAERS = 'EUR'.
MODIFY LT_TAB FROM LT_TAB TRANSPORTING WAERS WHERE WAERS = SPACE.
*CALLING ALV
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_INIT'
    EXPORTING
      I_CALLBACK_PROGRAM = 'ZPROVAMAX5'.
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_APPEND'
    EXPORTING
      IS_LAYOUT   = LAYOUT
      IT_FIELDCAT = FCAT[]
      I_TABNAME   = 'LT_TAB'
      IT_EVENTS   = IT_EVENTS[]
    TABLES
      T_OUTTAB    = LT_TAB[].
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_DISPLAY'.
I've also inserted a currency field
Max

'@' not getting displayed in the ALV report

Hello,
I am facing a strange issue in the ALV report display. A string starting with '@' is not getting displayed and says "default icon " on the report. and this is varying from system to system for the same user.
can anyone please help me in resolving the issue.
Thanks in advance.
Thanks and Regards,
Santhosh Guptha N.

@ is a default value as per ALV internal process. This is used in icons .
I think this is causing the confusion.
Check in the fieldcat if there is any adjsutment to be made to handle this.
Br,
Vijay

MMBE stock overview - S Loc Level stock not getting displayed - ECC 6 0

Similar Messages

Maybe you are looking for