MMBE TRX

Hi,
The transaction MMBE shows the material with base on the company code, plant, storage location and batch. But for one material appears also the STORAGE BIN. I really dont know why the system shows that information and where the system is taken this information.
Thanks in advance for the help
Regards
Enzo

Hi Arif Mansuri:
Thanks you for the answer, but, this number appeared in the report without stock, under the storage location position.
If in the report MMBE introduce the number in the batch field, the system shows information about the material, and shows the "batch number" with out any value in the Unresticted use, Qual. inspection and reserved. But when I click on that number the system say that is not a Batch.
Then I go to MSC3N and I insert the number in the Batch field, and the system shows me the following message:
"Batch XXXX does not exist".
So, in MMBE the number appeared in a Batch position, but then when I go to look for that Batch the system says, It does not exist".
My question is: Why the report MMBE show a Storage bin information? Where the system is taking that info? Why its shows like a bacth?
Thanks in advance for the help
Regards
Enzo

Similar Messages

MMBE On-order stock columns

Hi,
in trx MMBE when on-order stock column wiil be again 0 ?
I postes a goods receipt and MIRO but it remains with the quantity of the only one PO I created...
Best regards

Hi,
In MMBE Under on stock column will show the open purchase order qty stock. You can cross check with ME2M, enter Material & in selection parameter enter WE101 which shows the open PO of material. Then go to MMBE for same material it will show same qty which shows in open PO.

MMBE Sales order stock.

Hi,
in my system, trx MMBE shows me that Sales order stock is equal to 1.
Who is the owner of this stock my company or the customer ?
I have in plant X, 132 pcs in unrestricted use. I don't know if 132 include or not 1 piece of sales order stock.
Regards

Hi
I think that sales order stock is managed separately from the rest of the stock.
Yes this statement is 200 % correct provided the sales order is created with the item category in which the special stock indicator is marked with E during sales order creation
It will not get mixed with unrestricted and managed separately as you said
Suppose material X qty is 100 units in MMBE in unrestricted and now a sales order is created say for 10 units with its item category marked with E during sales order creation and say the order no is 2525 then once again in MMBE if you check unrestricted will be 90 and sales order stocks will be 10
So it will not get mixed and if you double click the sales order then the order no 2525 will be shown
That means that 10 units cannot be used for any other purpose other than 2525
Regards
Raja

Runtime Error in MMBE- s yntax error occurred in program "SAPLMBBS " in inc

Hi Gurus,
Runtime Error in "MMBE" Transaction -
The following syntax error occurred in program "SAPLMBBS " in include "LMBBSU07
" in
line 76:
"The column name "MATNR" has two meanings . ."
Any Input is Highly appreciated.
Thanks and Regards,
Selva

Hi,
This looks like an ABAP runtime error and the program concerned is a standard program. Please check the include and try debugging, suggest a breakpoint in line 76.
Thanks

Stock Quantity at Mc.9 and MMBe is not Matching

Hello,
The stock Quantity for a prticular material in MMBE is not matching with stock qunatitty in MC.9 and Mc.5
Can you please suggest me how to resolve this.
Thanks & Regards,
SAGAR

Hello,,
MMBE is the correct value for the current stock quantity. MC.9 and the other reports use tables S031/S039 or thereabouts, which is updated incrementally each month using the previous month's record and the issues / receipts during the month. Once the file gets corrupted - and it does - in our case about 5% of records are incorrect - that incorrectness is perpetuated in the following months, and the difference remains forever.
You can determine that the S031 record is in error by starting with the current month and looking at the Val stk rec qty and the val stk iss qty movements and the valuated stock, which will allow you to calculate what the stock at the end of the previous period should be. Run MC.9 for the previous period, check the valuated stock corresponds to that calculated, and repeat with the movements. You can do this in yearly periods until you find the error and then go down finer. I find that most of our corruption occurred in the first few months of using SAP.
If anyone knows of a method to regenerate the whole record in the S tables
I would be grateful for the info.
Conclsion:MMBE reads the current stock, while MC.9 or MC.5 are transactions that are feeded from infomation structures (which are updated with lower priority than stock tables). If an update of a infostructure fails, then there is no harm to the stock table update, but your statistics are just out of sync then.
So in short, you can trust MMBE, but no the statistic transactions
Regards
Mahesh Naik.

MMBE stock overview - S Loc Level stock not getting displayed - ECC 6 0

Hello,
In ECC 6,0 Version, in the MMBE (stock overview) stock is getting displayed only at the Plant level. It is not showing at levels below for eg. S Loc level/Valuation type level. Is there any setting to be activated for this?
Can any one throw some light?
Thanks
Regards
Kumaran

Hi
Before executing MMBE
have you selected on the initial screen the following :-
Selection of Display levels
COCD
Plant
Storage location
batch and
special stock
thanks
Prasanna
awrd if usefull

Getting Values of MMBE transaction

Hello all,
I need to get the Values of the MMBE transaction and use those values in my report for calculation. Can anybody suggest a way to execute the MMBE tranasaction from my report and get the values in a table.
Regards,
Vijayakumar

Vijay,
Submit MMBE program in your zprogram by passing the values to the MMBE selection screen for ex
SUBMIT MMBE Program WITH p_werks = p_werks
EXPORTING LIST TO MEMORY AND RETURN.
and then use
LIST_FROM_MEMORY
LIST_TO_ASCI
LIST_FREE_MEMORY
Or copy MMBE program as zmmbe and then use EXPORT IMPORT concept to get the final internal table values into your zprogram.
K.Kiran.

Manual Layout data not saving to trx cube

Hello BPS Experts,
I am trying to load some data using manual planning. I open the layout and enter the values and press save. I do not find any requests / data in the cube.
case 1) No error / warning
I do not get any error during the save function in the layout. What could be the possible step I am missing. What could be the root cause..
case 2) message - No data to be saved
sometimes i get a message 'No data to be saved'. And that data is not getting saved. What could be the reason of this message.
Regards,
BWer
Message was edited by: BWer

Hello BWer,
One of the main reasons for data not saving from a layout into a Trx cube, is if there is no key figure being updated. The value of the key figure being posted should <> 0.
If you choose the option to display transaction data in your layout, then, only data with key figure values <> 0 will be displayed.
Sunil

Stock is available in MMBE but delivery isnt created

Dear friends,
Stock for a material is available under unrestricted stock in a plant, as can be seen in MMBE. But at the time of creating a delivery, system throws up an error saying " Required quantity exceeds available stock"
I feel that some stock might be blocked against some open sale orders. Could this be the reason?
I also deleted one open sale order, still delivery couldnt be created.
Kindly advice.
Regards,
Ronald

Dear Ronald
Please check in VL21 whether any delivery is created without doing PGI for the same material. In this case also, you wont be able to post the goods issue for another delivery.
Also go to VA02, input the sale order and ensure that the quantity what you are to do delivery is flowing in confirmed quantity. If not, do availabillity check and then retry.
thanks
G. Lakshmipathi

TRX F150 -Dunning

Dear colleagues,
Further to the lauch of trx F150 for dunning I get a spool and I could print it but I need to turn it into a pdf and send it to an e-mail customer's address.
In case I have a spool that has several reminders for payment relating to different customers, there is a problem! That, because of the fact I can't share a document for 2 or more receivables and I can't send it to each customer by mail.
How can I solve this problem?
Thanks in advance.
Luca Stella

Dear friend
Agreed. However, live situation is User has performed Dunning run for all customer by mistake, where is not suppose to. and this dunning run is ended up with "Duning printout terminated" error.
If we fix the termination reason and complete the dunning then all outputs will go to customers automatically by e-mails from SAP. and we want to stop this.
hope I am clear and the requirment we are looking at...
best reg
S. Habib Pasha.

Want field and table name for RESERVED coloum in MMBE

Hi ,
        There is a RESERVED coloum in MMBE and     I want this   * RESERVED* coloum in MB52   .
       I got to know that Field related to this RESERVED coloum is BDMNG coming from table RESB .
       To confirm the field and table I checked the value in BDMNG by putting join on MARA and RESB where MATNR = BAUGR.
        But I got value in BDMNG is 50 and in MMBE it is .228 for that material.
           Please tell me field and table name for RESERVED coloum. and hoe to join MARA and RESB to get exact result.
Thanks and Regards,
Ranu

Hi,
Mara-matnr is not equal to Resb-matnr and it shows no record if i do like this.
But Mara-matnr is equal to Resb-baugr, and it gives me 1 record .But porblem is that i dint get BDMNG field matching with mmbe RESEVERD coloum.

Variance in MB5B and MMBE / LS26

Hi There ,
The stock on Posting date ( T Code - MB5B ) shows zero till today, where as the Stock overview MMBE / LS26 shows the correct figure as required .
Could anybody throw some light regarding what exactly is the logic behind the MB5B report . To my understanding MMBE / LS26 should sink with each other .
Thanks in advance for your kind help !!!!!!!!!
With Warm Regards
Manoj

Hi All ,
Thanks to all of you for your kind and quick reply .
As per the request from Anand ..The MB5B shows stock received as well as stock isssued till 12-12-2006 is same , so the stock available is zero . but on the same date 12-12-2006 System allowed to do Transfer Orders with a quantity ...my presumption is that if the stock in MB5B on 12-12-2006 is zero then how System allowed to do a posting of TO with a quantity ..
MB5B I believe includes the unrestricted stock ..
Kindly assist ...thanks again in advance for your kind help .
Best Regards
Manoj

Stock Overview (MMBE) Report in BW

Dear All,
We got a scenario where :
> The Key figure values like " Unrestricted Qty"," Quality Inspection ","Blocked Stock" shows different values in R3 when compared with BW.
------> When we boiled down,came to know that the extractor (2lis_03_bf) is not picking all Batches ,as compared with R3.Hence the Keyfigure values are less and different from R3.
It would be helpful if someone could take time to help us out on how this issue can be solved.Have checked the stock against MB5B and other reports aswell and the stock qt's are fine.but just that it shows different against MMBE in R3.
Manythanks
Arun

Hi Arun,
Weather u are drilling the report to the storage location wise.
if yes the data will never match as in Inventory side for some movment type accounting documents will not generate.
For Inventory level reporting i suggest u check the UPdate rule as per ur Indusry as they only are responsible for Data in BI.
Assign Points if it helps.
Regards,
sandeep

T.code MMBE

Hi,
How to sum the total stock list displayed in T.code MMBE?
It's Urgent....
Reward points for helpful answers.

what is your release? in ECC 5.0 there's a sum on every level (total, plant, storage, batch ... ) as a default.
Edited by: Mylene Euridice Dorias on Jan 25, 2008 3:10 PM

Trx F-53, The difference is too large for clearing Message no. F5263

Hi,
I created a PO, then I posted the goods receipt, the invoice and I was trying to
post the payment by F-53 trx.
When I select an open item from the list and I try to simulate the posting by the menu (Document, simulate), system replies by:
"*The difference is too large for clearing
Message no. F5263*"
Cannot understand why it is not possible to post the outgoing payment
Regards

Dear Sappione,
did You check the tolerances?
Check in transaction OBY6 the indicator 'No forex rate diff. when
clearing in LC' is not set the amount is converted with the exchange
rate valid at clearing date, in case You're clearing in LC a foreign document.
When you post a clearing transaction with rounding
differences, those differences are posted to an additional line item
GL accounts. This account determination is customized as follows :
FBKP - Exchange rate differences -
Exchange rate difference in open items - KDF -a/c XXXXXXXXX
(Realized gain exchange rate difference)
The accounts used for rounding differences when clearing
are the realized gain/loss exchange rate accounts.
please check all the 3 suggestions.
Mauri

MMBE TRX

Similar Messages

Maybe you are looking for