MMC Console -- install fails on 64 bit systems (both W7 and VISTA Ultimate)

Hi all
was trying to install trial version (ABAP) on W7 X-64 bit
MMC snap in console fails to install -- message SAP MMC snap in
This installation does not support 64 bit Windows operating systems -- please use the the corresponding 64 bit version of the installer.
I tried also running in "Compatability mode" same error.
Since this has to be installed first I didn't bother installing the rest.
Any news -- these days 64 bit CPU's are the norm even on smaller laptops so I'm a bit surprised this doesn't work on a 64 bit Windows system.
With a decent amount of RAM in the system I don't won't to be restricted to 3GB on a 32 bit system anymore .
So very surprised here that this doesn't work.
Any news on a 64 bit update.
(It works on the 32 bit version of W7 running under a VM but I really want to run it on a 64 bit system on a physical machine).
Cheers
jimbo

Windows has its own list of boot OSs, and default, from msconfig. It will sit and wait for xx-seconds on startup in Windows if you want to boot from an alternate.
As to whether Apple's OS Switcher (aka startup disk bootcamp control panel or tray icon) sees both, I had Windows Home Premium and Ultimate 64, and pretty sure OS X saw both. That was pre-Leopard and before there were 64-bit Apple drivers.
I can't think of any scenerio of wanting to mix 32-bit and 64-bit on the same paritition, you realize you can't install the one over the other and must do a clean install.
When I added a partition out of main partition (I wanted to put search index and page file on their own partition) those partitions aren't seen - are hidden - to Leopard.

Similar Messages

Can you download a 32 bit installer for photoshop elements 12 to install on a 64 bit system (windows 7)

can you download a 32 bit installer for Photoshop elements 12 to install on a 64 bit system (windows 7). Thanks in advance

yes, if you follow all 7 steps you can directly download a trial here: Adobe Photoshop Elements 12 Direct Download Links, Premiere too | ProDesignTools
and activate with your serial number.
if you have a problem starting the download, you didn't follow all 7 steps, or your browser does not accept cookies.
the most common problem is caused by failing to meticulously follow steps 1,2 and/or 3 (which adds a cookie to your system enabling you to download the correct version from adobe.com).
failure to obtain that cookie results in an error page being displayed after clicking a link on prodesigntools.com or initiates the download of an incorrect (eg, current) version.

I get an "install failed" message. "Recovery system can't be created-click restart to return to previous version of OS X." This doesn't work. My Mac continues to try to install Mountain Lion. What is the elegant way to get my system back?

I get an "install failed" message. "Recovery system can't be created—click restart to return to previous version of OS X." This doesn't work. My Mac continues to try to install Mountain Lion. What is the elegant way to get my system back?

The first time I attempted to install ML was on a late 2011 MBP. It ran for three minutes then gave me the error message: Could not install OSX due to an unexpected error. I was using the original ML install app, not a USB or other drive.
After a couple of restarts wiht the same result I saw a message to the effect that the install was trying to close open apps. I closed apps manually a few times to no avail. I shut down instead of restarting then booted into Safe mode (hold down the shift key when starting) and that did it. The install went smoothly after that.
I since installed ML in two iMacs using a cloned copy of the install app on a USB drive. This time I shut down the computers and booted into Safe Mode first and there were no problems.
I don't know if this issue is the one causing you these problems but it is a simple enough solution to try.
Jay

Reader doesn't install on my Win 7 64 bit system. HD and install are both fresh but get an error that there is previous information?? concerning an install.

Like it says: Reader doesn't install on my Win 7 64 bit system. HD and install are both fresh but get an error that there is previous information?? concerning an install.

Please give the full, and exact, message. Thanks.

I have a MAC, Ive just installed OS10.10.3 operating system in it and I can't open Photoshop. This is a wide spread problem that involves Java and Photoshop software. Since you produce both these products , I turn toward you to direct me to the best "Fi

I have a MAC, Ive just installed OS10.10.3 operating system in it and I can't open Photoshop. This is a wide spread problem that involves Java and Photoshop software. Since you produce both these products , I turn toward you to direct me to the best "Fix"?

Go here Mac OS X Yosemite (10.10) compatibility FAQs | CC

How to create the Business System both sender and receiver in SAP XI / PI

Dear All
kindly let me know how to create the Business System both sender and receiver in SAP XI / PI
Regards
Blue

Hi,
If by any chance you are not able to find these....
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/xi/workingwithSystemLandscapeDirectory+%28SLD%29&
http://help.sap.com/saphelp_nw04s/helpdata/en/24/8fa93e08503614e10000000a114084/frameset.htm
http://help.sap.com/saphelp_nw70/helpdata/en/f1/92b248db68409487661ff13239127d/content.htm
Regds,
Pinangshuk.

Trying to install Mountian Lion onto Macbook Pro and Install failed because a recovery system can't be created What do I do?

My Macbook Pro is set up to run Windows via bootcamp and I am trying to install Mountain Lion.
I cant install and has come up with an error message telling me Install Failed because it cant create a recovery system. I am not very technical and can just about spell 'Mac' so I need help
Thanks

Installer reports "This disk cannot be used to start up your computer"

Problems Installing ColdFusion 9 (64 bit) on Windows 7 and IIS 7.5

Problem: Empty response for static Files including images, CSS and js files. The response code is 200 OK, but there is no actual response (it's empty).
The ColdFusion Administration web site works correctly except it's not displaying any images, css and js. Why it is serving up dynamic content and not static is a mystery.
Installed ColdFusion 9 (64 bit) Multiserver Option on Windows 7 running IIS 7.5.
I have verified that IIS 7.5 is correctly configured for Static Content for both the handler mappings and the modules.
The Configuration for IIS 7.5 install looks like this:
The ColdFusion web configuration tools shows that it is connected to all instances of IIS.
I have uninstalled ColdFusion9 and IIS 7.5, and reinstalled many times but get the same problem: Empty responses for Static Files.
Help is appreciated.

To Clarify the blurry picture, this is what the IIS 7.5 install options look like:
Web Mgmt Tools > II6 Mgmt Compatility > IIS Metabase & II6 Compatability
WWW Services > Application Dev Features > .Net Extensibility and ASP.Net and CGI and ISAPI Extensions & ISAPI Filters
Common HTTP Features > Default Document and Directory Browsing and HTTP Errors and Static Content
Security > Request Filtering

Windows XP Pro (32-bit) and Vista Ultimate (64-bit) on the same Mac Pro HD?

Has anyone been able to install both Windows XP Pro (32-bit) and Windows Vista Ultimate (64-bit) on the same dedicated Windows hard drive? I have four HD in my Mac Pro, and one of them is dedicated for Windows (and bootable via Boot Camp). I found the following technical articles about installing Windows XP & Vista on the same hard drive (using two separate partitions) using a VMWare machine as the test system:
http://apcmag.com/howto_dual_boot_vista_and_xp_with_vista_installed_first__the_stepbystepguide.htm
http://apcmag.com/howto_dualboot_vista_with_xp__stepbystep_guide_withscreenshots.htm
Has anyone successfully installed Windows XP (32-bit) and Vista 64-bit) on the same NTFS partition?
I already have Windows XP Pro (32-bit) SP3 installed on my single NTFS hard drive. I am looking for the best way to add the Vista 64-bit installation on the same hard drive.
Any thoughts and advise are appreciated.

Windows has its own list of boot OSs, and default, from msconfig. It will sit and wait for xx-seconds on startup in Windows if you want to boot from an alternate.
As to whether Apple's OS Switcher (aka startup disk bootcamp control panel or tray icon) sees both, I had Windows Home Premium and Ultimate 64, and pretty sure OS X saw both. That was pre-Leopard and before there were 64-bit Apple drivers.
I can't think of any scenerio of wanting to mix 32-bit and 64-bit on the same paritition, you realize you can't install the one over the other and must do a clean install.
When I added a partition out of main partition (I wanted to put search index and page file on their own partition) those partitions aren't seen - are hidden - to Leopard.

Still failed to read email attachment, both Mail and Enturoge

I can't open email attachments (tif and jpg) after installation of OS X 10.6 by using Mail.
I today installed MS Enturoge but still having same problem as Mail.
Can Apple tell me why? And how to solve this problem?

Alex,
Yes, the inbound mail attachment is supported in B2B PS3 (11.1.1.4.0) but you cannot send both attachment and body to a JMS queue simultaneously from B2B. Body will be passed to the JMS queue and attachment will be written to the b2b.attachments.dir (set as B2B property in EM console) -
http://docs.oracle.com/cd/E23943_01/user.1111/e10229/app_isags.htm
Regards,
Anuj

Bootcamp and Vista ultimate 32 bit blue screen

Hello all. I just purchased my Macbook Pro (late 2008) model last night and I also did a memory upgrade from 2Gb of DDR3 to 4Gb of DDR3. And its was working great..
So i've had a macbook before but never a macbook pro. So i ran the BOOTCAMP Assistant and went through the stages of partitioning and inserting my Windows Vista Ultimate Disc. It goes through the install process and once its finished installing, it restarts and I get to where Vista says "Now configuring your system, please wait....." or something of the sort.. Anyway then it flashes a blue screen (blue screen of death) and then it reboots my Macbook.
I'm lost. I removed the partition and tried again with different versions of Vista: HomePremium, Business, and Basic, still nothing. I also tried different size partitions, still nothing. Any help will sure be appreciated. Thanks in advance

George Frazee wrote:
On my whitebook I had Vista Business running without error on a 20GB partition.
I am sure that it could be done. However, the chances of problems are very high. Microsoft recommends at least 40 GB.
http://www.microsoft.com/windows/windows-vista/get/system-requirements.aspx

Problem with the new 64-bit edition of iTunes -- Windows Vista Ultimate

Very recently, I upgraded from Windows Vista Ultimate 32-bit to the 64-bit edition. I also downloaded the 64-bit edition of the Windows-based iTunes.
My individual iTunes music files were stored on a separate internal hard drive that was never a part of the upgrade overhaul (C: drive was upgraded to the 64-bit edition; my iTunes files are located on the D: drive).
After opening iTunes, I immediately went to Edit > Preferences > Advanced (tab) and changed the "iTunes Music folder location." I located my iTunes folder on the D: drive and clicked "Select Folder."
Unfortunately, nothing happened. Meaning, iTunes does not recognize any of the files located within this iTunes folder. This is the exact same iTunes folder that I used under the 32-bit edition of the OS.
I have nearly 50 GB of music files, none of which are now part of my music file library.
What's going on?

Chris CA wrote:
If the songs are not tagged correctly (title, album, artist at a minimum), they will go into Unknown.
If they are tagged correctly, go to iTunes prefs -> Advanced and uncheck *Keep iTunes music folder organized* then close the prefs.
Re-open prefs and recheck *Keep iTunes music folder organized*.
All my music was imported from CDs using iTunes.
After unchecking "Keep iTunes music folder organized" it doesn't make any difference. Virtually everything is in "Unknown."
I can't believe this..... it's like iTunes doesn't recognize its previous handywork.
Very frustrating!
If anyone know a way to quickly clear this up, let me know.

Can Premiere 5.1 be installed on a 64-bit system?

I upgraded a Vista 32-bit to Win 7 64-bit and now cannot seem to install. A message indicates I should check the 32-bit or 64-bit compatability.
Thanks for any assistance.

Got you, and thanks for that clarification. You want the Premiere - Premiere Pro CS4 & Earlier Forum. Not sure of the answer, but someone there can help you.
Good luck,
Hunt
[Thread moved from Premiere Elements Forum]

New install fails at checking file system. HELP!

I just installed arch for the first time and followed everything very carefully. They only part that i was heasitant about was where to install the MBR. I installed it on the SDA. not sda 1 or sda2 ect.......i think that is what went wrong but dont know how to fix it.....or it might be something completely different. can someone help?

JoeKer wrote:
fsckd wrote:To answer your question on reformatting the boot partition, using a different linux system, mount it, perhaps on /mnt/brokenboot. Then, copy the files over to another disk by cp -rp /mnt/brokenboot /anotherdisk/. Unmount the broken boot. Format it using mke2fs. Mount it again. Copy the files back. You may need to reinstall grub afterwords.
i would do that but boot is ext2.....it ooks lke the problem is wth the superblock of root.....any ideas?
Then why did you write this:
JoeKer wrote:so i really just want to rewrite the /boot partition as ext 2 or 3 and be done with it but cant figure out how to do this.....can anyone tell me exactly what is written in boot? could i boot into a live cd and try to fix it from there? (like system rescue cd)
Meh, figure out what your problem is before asking for help, and when people ask you for more info, give it.

Browser Install Fails, it says "Firefox has stopped working" and it does not install. I cant use your browser.

I had few issues with Mozzilla browser so i uninstalled it completely and tried to re install it again. But when i try to reinstall it , it does not install fully , it breaks half way and says, Firefox has stopped working. I cant install Firefox now. Can you help.

Try this instead:
*Download the full Firefox installer and save the file to the desktop<br>http://www.mozilla.org/en-US/firefox/all.html
*Start the installation with a double-click on the desktop icon
Make sure that your security software isn't causing problems.
Boot the computer in Windows Safe mode with network support (press F8 on the boot screen) as a test to see if that helps.
*http://www.bleepingcomputer.com/tutorials/how-to-start-windows-in-safe-mode/

MMC Console -- install fails on 64 bit systems (both W7 and VISTA Ultimate)

Similar Messages

Maybe you are looking for