MMC Error : Abap WP node

HI,
I am unable to find abap work procress node in the MMC.
How can i retrive it, But the server is up. this occured during upgrade.
I am able to login to the system on SAP level..
Regards,
Mag.

Hi,
Follow the steps to add the system in MMC console.
1) Go to dos prompt: -
\usr\sap\<SID>\exe\uc\NTI386 & execute the command sapstartsrv
2) Give the details & user as SAP Service<SID> & click on the checkbox of Use Environment & there give user as <sid>adm
3) Add for all the instances, which are running on the same server& then open SAPMMC console & start the server.
Please reward points if usefull
Regards,
Rakesh.

Similar Messages

Jcontrol.exe stops with Error executing Bootstrap Node in EP

Hello Everybody,
We have Enterprise Portal 6.0 installed on our system with 1 GB RAM .The jcontrol.exe gets stopped in MMC ,the developer trace gives the error :
Error executing Bootstrap Node
Iam trying to restore Portal Application on another server with 2 GB RAM.I have taken OS level Offline backup of the system and restored it on another server of 2GB RAM.After that when I boot the server again
jcontrol.exe gets stopped giving the same problem in developer trace:
Error executing bootstrap node
I want to change memory parameters for the system through configtool as given in note 723909 but iam even not able to connect to configtool,while connecting to configtool the error message given is
Error connecting to DB
Although i hv manually through command prompt shutdown and started the database but still gives the same problem?
How to change the various memory parameters then? Kindly revert at earliest.Kindly revert to the issue at earliest as this is urgent and iam struggling with this issue since many day.Ur reply if found useful shall be awarded points.
Regards,
Saumya

Hi,
I would go with Michael's suggestion about system copy. I don't think just copying the files from one machine to another would serve the purpose. Let's not forget it's a totally different server all together and while installations, there are references to hostnames.
Java system copy would be an ideal solution or i would suggest you to go for an upgrade of the same old server for RAM related issues.
Regards,
Sunil

Again SAP MMC Error

Hi
      I stopped SAP MMC thru   all tasks -> stop
      Later when   I used all tasks->start
Servers are not started Even after 2 hrs
What could be the reason and
qpkdk137807\saploc\J2E\JC00\work\dev_jcontrol.log contains following information
-> arg[06] = -syncSem=JSTARTUP_WAIT_ON_2240
-> arg[07] = -jvmOutFile=C:\usr\sap\J2E\JC00\work\jvm_bootstrap.out
-> arg[08] = -stdOutFile=C:\usr\sap\J2E\JC00\work\std_bootstrap.out
-> arg[09] = -locOutFile=C:\usr\sap\J2E\JC00\work\dev_bootstrap
-> arg[10] = -mode=BOOTSTRAP
-> arg[11] = pf=C:\usr\sap\J2E\SYS\profile\J2E_JC00_qpkdk137807
-> lib path = PATH=C:\j2sdk1.4.2_08\jre\bin\server;C:\j2sdk1.4.2_08\jre\bin;c:\sapdb\programs\bin;c:\sapdb\programs\pgm;c:\j2sdk1.4.2_08\bin;.;c:\sapdb\programs\bin;c:\sapdb\programs\pgm;c:\j2sdk1.4.2_08\bin;.;%path%;C:\usr\sap\J2E\SCS01\exe;C:\usr\sap\J2E\JC00\exe;C:\usr\sap\J2E\SYS\exe\run
-> exe path = PATH=C:\j2sdk1.4.2_08\bin;C:\usr\sap\J2E\JC00\j2ee\os_libs;c:\sapdb\programs\bin;c:\sapdb\programs\pgm;c:\j2sdk1.4.2_08\bin;.;c:\sapdb\programs\bin;c:\sapdb\programs\pgm;c:\j2sdk1.4.2_08\bin;.;%path%;C:\usr\sap\J2E\SCS01\exe;C:\usr\sap\J2E\JC00\exe;C:\usr\sap\J2E\SYS\exe\run
[Thr 2244] Tue Jan 10 12:29:08 2006
[Thr 2244] *** ERROR => invalid return code of process [bootstrap] (exitcode=66) [jstartxx.c   1433]
[Thr 2244] JControlExecuteBootstrap: error executing bootstrap node [bootstrap] (rc=66)
[Thr 2244] JControlCloseProgram: started (exitcode = 66)
[Thr 2244] JControlCloseProgram: good bye... (exitcode=66)
Regards
Rakesh

Hi,
Have you checked up , if all the services have been started .
Check up if the main services are started ,such as
SAP<instance>_00
SAP<instance>_01
SaposCol
SecondaryLogon
Server
Distributed File System
Computer Browser
Also verify if the database instance is started.
If it is fine,Try manually starting jcontrol.
It will give you a message on why it cannot start.Let us examine further after that.
Please check up the bootstrap logs
Regards,
Harish

Web-dynpro application -ERROR: ICF service node "/sap/bc/webdynpro/sap/zqm_cto_arr_general1" does not exist (see SAP Note 1109215) (termination: ERROR_MESSAGE_STATE)

i have created my web-dynpro application in development. and sent to quality . whenever i will execute my dynpro in quality i got one message
ERROR: ICF service node "/sap/bc/webdynpro/sap/zqm_cto_arr_general1" does not exist (see SAP Note 1109215) (termination: ERROR_MESSAGE_STATE)
whenever i saw sicf transaction my web-dynpro is not seen . my dynpro application name is more then 15 character. what i will do . please give me valuable suggestion.....

Hi Ashok,
for your requirement the application is not exist in particular place. It means, the webdynpro application is saved at different package or different location.
Please change the webdynpro component name and save it in particular request in package, then transport it to quality ..(development server )
then go to SICF t.code .. sap->bc->webdynpro->sap->find out your application and activate the service of your webdynpro application.
Now test it ... this solution might helpful to you .
Regards,
Naveen M

Error in BPM - Error when processing node '0000000065' ParForEach index

Hi All,
I have an issue .. I have done 1:n mapping successfully and would like to place the Send step in loop instead of a Block .. The reason being I have the count of how many times the Send step should executed for multiline.. I need to receive an Acknowledgement for each send step.. If I dont receive the required number of Acknowledgements then .. I need to revert back some Creations which is a business requirement ..
So .. I have initialized a container operation variable i to '0' .. Then the loop condition is i < count .. Send the multi-container .. Receive the Response .. If dont receive the desired response for any one of the multi-line then I need to do a cancellation process in a loop again .. So .. now I am getting an Exception "Error when processing node '0000000065' (ParForEach index 000000)
Message no. SWP088" in the loop step ..
It is fine if somebody can suggest alternate logic can be applied as well but first preference to use a loop which consumes lesser system resources ..
Kindly look into the Issue
Regards,
Raj
Edited by: raj2112 on Sep 21, 2010 2:34 PM

if you use a loop step, you will send one message per time. ussing block step you have parallel processing ussing ParForEach. now is for X reason the item cannot be created, do a roll back in the target system. the problem here you will do the rollback once the last message reach.
the other posibility is to handle application ack in the sender step. it will let you know it the message was processed success and this ack could be the end condition of your block step. but you cannot use this with loop step.
take a look to this
http://help.sap.com/saphelp_nw04/helpdata/en/55/65c844539349e9b1450581ab44a5e6/frameset.htm

DAC message while running execution plan - "Error while loading nodes"

I have just installed and setup Informatica 8.6.1, DAC, BI apps 7.9.6 for a Oracle Ebs R12.1.1 source instance
In informatica I have defined 2 relational sources "DataWarehouse" and "ORA_R1211" - the same names as in physical data sources of DAC
I have mentioned the flatfile parameter as "ORA_R1211_Flatfile" in DAC
after successfully build, when I run the ETL the error "Error while loading nodes" occurs.
the log file shows the following details:
START OF ETL
20 SEVERE Sat Apr 23 21:57:58 GST 2011
ANOMALY INFO::: Error while loading nodes.
EXCEPTION CLASS::: java.lang.NullPointerException
com.siebel.etl.engine.core.SessionHandler.getNodes(SessionHandler.java:2842)
com.siebel.etl.engine.core.SessionHandler.loadNodes(SessionHandler.java:473)
com.siebel.etl.engine.core.ETL.thisETLProcess(ETL.java:372)
com.siebel.etl.engine.core.ETL.run(ETL.java:658)
com.siebel.etl.engine.core.ETL.execute(ETL.java:910)
com.siebel.etl.etlmanager.EtlExecutionManager$1.executeEtlProcess(EtlExecutionManager.java:210)
com.siebel.etl.etlmanager.EtlExecutionManager$1.run(EtlExecutionManager.java:165)
java.lang.Thread.run(Thread.java:619)
21 SEVERE Sat Apr 23 21:57:58 GST 2011
* CLOSING THE CONNECTION POOL DataWarehouse
22 SEVERE Sat Apr 23 21:57:58 GST 2011
* CLOSING THE CONNECTION POOL ORA_R1211
23 SEVERE Sat Apr 23 21:57:58 GST 2011
END OF ETL
*****************

Hi,
Mark the current EP as completed and re-assemble the subject area, generate parameters and build the EP and run the load.
Thanks,
Navin KumarBolla

How to resolve "Internal error: ABAP Report cannot be loaded" error

Hi All,
I am new to SAP.Please help me out from this problem.
When I am trying to debug BSP page, in debugging mode it shows "Internal error: ABAP Report cannot be loaded" error and then dumps.
In transaction ST22 it shows this dump something like this
Runtime Errors         MESSAGE_TYPE_X
The current application program detected a situation which really
should not occur. Therefore, a termination with a short dump was
triggered on purpose by the key word MESSAGE (type X).
    1 FUNCTION AC_SYSTEM_FLUSH .
    2 *"----
    3 ""Lokale Schnittstelle:
    4 *" IMPORTING
    5 *"     VALUE(CALLED_BY_SYSTEM) TYPE C OPTIONAL
    6 *" EXCEPTIONS
    7 *"      CNTL_SYSTEM_ERROR
    8 *"      CNTL_ERROR
    9 *"----
   10   data: sysubrc like sy-subrc.
   11
   12   CALL FUNCTION 'AC_FLUSH_CALL'
   13        EXPORTING
   14             SYSTEM_FLUSH = 'X'
   15             CALLED_BY_SYSTEM = CALLED_BY_SYSTEM
   16        IMPORTING
   17             MESSAGE_NR   = sysubrc
   18             MESSAGE_TEXT = SY-MSGLI.
   19
   20   sy-subrc = sysubrc.
   21
   22   CASE SY-SUBRC.
   23     WHEN 0.
   24     WHEN 1.
   25 *     system_error
   26       MESSAGE ID 'CNDP' TYPE 'X' NUMBER 007 RAISING CNTL_SYSTEM_ERROR.
   27     WHEN 2.
   28 *     method_call_error
>>>>>       MESSAGE ID 'CNDP' TYPE 'X' NUMBER 006 RAISING CNTL_ERROR.
   30     WHEN 3.
   31 *     property_set_error
   32       MESSAGE ID 'CNDP' TYPE 'X' NUMBER 006 RAISING CNTL_ERROR.
   33     WHEN 4.
   34 *     property_get_error
   35       MESSAGE ID 'CNDP' TYPE 'X' NUMBER 006 RAISING CNTL_ERROR.
   36     WHEN OTHERS.
   37       RAISE CNTL_ERROR.
   38   ENDCASE.
   39
   40 ENDFUNCTION.
Thanks in advance
Sunil Choudhury

Hi Sunil,
The reason for this could be anything, anyways look up for an OSS note with the error message first.
As a workaround, you can try to use the classic debugger instead of the new ABAP debugger and see if it works.
You should be logged into SAP via SAP GUI when you are debugging BSP.
Regards
Chen

Reg:bsp error in ICF node

hi ,
i had developed a BSP Application in sap 4.7 ,but when i test it iam getting the below error .
certain ICF nodes must be released in transaction SICF for the BSP Extensions HTMLB
SAP/BC/BSP/SAP/SYSTEM
SAP/BC/BSP/SAP/PUBLIC/BC
SAP/PUBLIC/BSP/SAP/PUBLIC/BC
could any one help me out regarding this issue.
Thanks & Regards
Satish.

In OSS note <b>517484</b> on https://websmp204.sap-ag.de/notes , and there we can find that for BSP following services should be activated!
<b>Goto SICF Tcode & activate the below nodes:</b>
/default_host/sap/bc/bsp/sap
/default_host/sap/bc/bsp/sap/system
/default_host/sap/bc/bsp/sap/public/bc
/def ault_host/sap/public/bc (available for 620 with Support Package 34)
/default_host/sap/public/bc/ur (available for 620 with Support Package 34)
/default_host/sap/public/bsp/sap/public
/default_host/sap/public/bsp/sap/public/bc
/defaul t_host/sap/public/bsp/sap/system
/default_host/sap/public/bsp/sap/htmlb (as of Release 620 Support Package SAPKB62026)
Note: After you activate the BSP service, the corresponding application services must also be activated.
Raja T
Message was edited by:
Raja Thangamani

Back ground job error ABAP/4 processor: CONVT_OVERFLOW

Hi all,
i getting the error ABAP/4 processor: CONVT_OVERFLOW while executing the Zprogram(custom) in background.
This background job is failed at move statement.
what may cause this error?
please help me regarding this issue>
thanks in advance.

Hi PR ,
check ST22 , in that ananlysis screen see for the arrow make from where dump is tiggered .
so here u have to look in.
this error comes when there is type miss match.
Regards
Peram

OBIEE Error 'Root XML Node nqw not found in island!'

Hello,
After I altered my Hyperion Essbase structure, my OBIEE Reports don't open.
I increase one generation in my accounts hierachy, and now when I try open my OBIEE reports, I get the follow error:
"Root XML Node nqw not found in island"
Any help?
Thanks,

Hi Naresh,
I hope you have resolved the issue by this time.
In my case, it was related to an invalid filter on the report.
I have removed the filter by updating the report .xml file from Catalog Manager.
Hope this helps other with similar issue.
Thanks,
Ravi

I have an error of invalid node structure

I have an error of invalid node structure. Can I save my data from my hard drive? Is it even fixable?

Invalid Node Structure is not a hardware failure, it never was (you may still have a hardware failure, but the Invalid Node error is not indicative of this problem.
Still, Disk utility will certainly fail to fix it, and DiskWarrior will probably fail too.
But don't despair. Try this, and don't give up till you've tried it at least three times.
First, get the name of the partition of the failing volume.   You can get it most easily by finding your disk in Disk Utility, selecting your partition (not the drive) and type cmd-i.    Look for "Disk Identifier" right at the top.
Then, open up Terminal, and type this:
sudo /sbin/fsck_hfs -yprd /dev/disk5s2
substituting your disk identifier for the one already here.   Keep the "/dev/" part.   Enter your password, and wait. It may take a while. I have had this fail several times before finally working so its important to keep trying.   It's faster than a reformat!!!
If the afflicted disk is your startup disk, you will need to do this in recovery mode: restart the computer, hold down option, and wait for the disk options to appear.   Select that, then proceed to Disk Utility and then Terminal as described above.
Good luck, and always keep a backup!
chris watts

Error converting DOM nodes into SOAP nodes

Hi,
i am doing an http call using http binding activity in oracle soa suite 11g.The http call requires some header information.When I pass the header information through headers in invoke activity and invoke the http call,I get an error " Error converting DOM nodes into SOAP nodes".What might be the reason and how to solve it.
Naresh

Hello,
It appears your code is trying to repeat messagePart itself. Split Joins strictly adheres to a WSDL definition for incoming and outgoing messages.
Instead of repeating <RootElement> which is defined as single occurance in your message definition within WSDL, you should find a way to tweak the WSDL to have "repetitive node which will become single message after split" within 1 Root element.
This will call for having need of implementing transformation within split join based on need of target input message. Below is the example:
WSDL contains:
<wsdl:message name="inputMessageName">
     <wsdl:part name="partInput" element="rootElement"/>
</wsdl:message>
What your current xml structure is(please note how message itself is repeating below while it has been defined as single in wsdl, unfortunately there is nothing maxOccurs for message in WSDL definition , although you can define multiple parts but that is not case here):
<soap:Body>
<rootElement>
</rootElement>
<rootElement>
</rootElement>
<rootElement>
</rootElement>
</soap:Body>
What Split-Join expects(If you have existing wsdl then you need to tweak it to conform to below kind of structure then use transformation within split join to convert it into correct xml structure for outgoing):
<soap:Body>
<rootElement>
     <repetitiveElementSpecificToIndividualSplitRequest/>
     <repetitiveElementSpecificToIndividualSplitRequest/>
     <repetitiveElementSpecificToIndividualSplitRequest/>
</rootElement>
</soap:Body>
I hope this helps.
Regards,
Ankit

Error : ABAP/4 processor: CALL_C_FUNCTION_NO_AUTHORITY

Hi all,
We are following 3 steps while creating a payment . In the first step, a file is created wid payment information .Second step encrpts it. In the third step, mail is triggered to the person who ran the payment in F110 .
The error is some persons are getting the mail and some are not getting( error: ABAP/4 processor: CALL_C_FUNCTION_NO_AUTHORITY) .
Is this an auhtorization issue or code bug...for some eid's its failing in the FM which picks up the e-mail information .
Any suggestion will be of great help.
Regards,
Anil.S

Solved ...2 auth objects s_c_funct and s_log_com were missing in the role

Exchange Server 2013 Toolbox MMC Error ConsoleInitialize.ps1 not recognised

Hello, after installing and configuring Exchange 2013 during a migration from 2010 (with both versions still running), I am now receiving a ConsoleInitialize.ps1 System.Management.Automation.RemoteException exception when trying to run the Management Toolbox
(I am really after the Queue Viewer).
This is the same when trying to connect locally on the server and remotely on a client computer with Management Tools installed - I can use EMC without any errors locally or remotely.
I have tried various fixes found around the net, including:
Changing the Identity of the Classic and DefaultAppPools in IIS and resetting - from LocalSystem to ApplicationPoolIdentity
Adding the roles to Exchange Organisation Management in AD
Disabling SSL on the Powershell virtual Directory and setting auth to anonymous
I have not tried recreating the Powershell virtual directory as mentioned on a few sites, as I have not been able to test that in the lab, and I am not sure how it affects the powershell session that I am doing it from.
The only thing that I can think that could be an issue is that Ex2010 is still up and running, could it be that Management Tools is looking at the old server, instead of the new?
Can anyone point me in the right direction with this one?
I can post more info if required.
Thank you.
Xpost here: http://serverfault.com/questions/666054/exchange-server-2013-toolbox-mmc-error-consoleinitialize-ps1-not-recognised

Hi,
If the EMS and EMC work properly, I think the powershell cannot be the problem. Is it possible to build up a new Exchange 2013 Server in test environment and make a replacement of
the ConsoleInitialize.ps1 file?
Thanks,
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Simon Wu
TechNet Community Support

BI Installer issue with message" Error: ABAP Backend doesn't exist in SLD

Dear All
Please help me to solve this issue, during the BI Installer the process get errors message
"Error: ABAP Backend doesn't exist in SLD"
Follwoing the oss Note 983156 - BI configuration w. Template Installer
1.Logon to the SLD: http://<host>:<port>/sld. (Your configured SLD (central or local SLD))
Please check in Home -> Technical Systems -> select type ABAP. This
should have configuration of your ABAP (BI) system. yes the system already there.
2, goto http://host:port/index.html ->Web Dynpro ->Content Administrator-> Check SLD Connection
the connection is running well.
Please any one can help me to solve this issue,
Thanks and Best Regards,
Chrisna

Hi
I found your question because I wanted the answer to it too. I'm trying to connect my Java-only stack portal to my ABAP-only stack BI system using the template in NWA. I get through all the steps up to the creation of the WebDynpro JCO RFC destinations then it fails saying "ABAP Backend doesn't exist in the SLD".
I've checked the SLD and the ABAP backend most definitely DOES exist in the SLD and the SLD is being updated by both the ABAP backend and the Java portal systems thus proving a valid connection exists between the SLD and both systems I'm trying to connect.
I think I've solved it however.
I always define a TCP alias equal to the SID for any SAP system I build and I try to make all connections to <sid>.<fully.qualified.domain.name>. This separates, to a degree, the physical server from the SAP instance.
I used this alias in the BI installation template but I noticed that the ABAP backend was listed as <SID> <hostname> in the SLD (not <SID> <sid alias>). When I used the real hostname in the template it ran to completion.
The other change I made, and it's possible that this was the real reason instead of the alias/hostname issue, was that I restarted the BI system before retrying. I only did this because I was getting error messages saying there were too many active CPIC conversations and I couldn't find them to kill them off.
Hope one or other of these things might help.
Murray

MMC Error : Abap WP node

Similar Messages

Maybe you are looking for