MMC Error

Microsoft management console error while opening group policy object, and also The active directory sites not shown in the list

Problem signature:
Problem Event Name:   APPCRASH
Application Name:   mmc.exe
Application Version:   6.3.9600.16384
Application Timestamp:   5215ef8f
Fault Module Name:   gpmgmt.dll
Fault Module Version:   6.3.9600.16384
Fault Module Timestamp:   5215e5c7
Exception Code:   c0000005
Exception Offset:   000000000013c2af
OS Version:   6.3.9600.2.0.0.272.7
Locale ID:   1033
Additional Information 1:   d45c
Additional Information 2:   d45ca13067593f2d038eef079932b125
Additional Information 3:   df47
Additional Information 4:   df47f1570c5e65c39f98706ba5847707
Kindly do the needful for close this error and give a solution..

Similar Messages

Exchange Server 2013 Toolbox MMC Error ConsoleInitialize.ps1 not recognised

Hello, after installing and configuring Exchange 2013 during a migration from 2010 (with both versions still running), I am now receiving a ConsoleInitialize.ps1 System.Management.Automation.RemoteException exception when trying to run the Management Toolbox
(I am really after the Queue Viewer).
This is the same when trying to connect locally on the server and remotely on a client computer with Management Tools installed - I can use EMC without any errors locally or remotely.
I have tried various fixes found around the net, including:
Changing the Identity of the Classic and DefaultAppPools in IIS and resetting - from LocalSystem to ApplicationPoolIdentity
Adding the roles to Exchange Organisation Management in AD
Disabling SSL on the Powershell virtual Directory and setting auth to anonymous
I have not tried recreating the Powershell virtual directory as mentioned on a few sites, as I have not been able to test that in the lab, and I am not sure how it affects the powershell session that I am doing it from.
The only thing that I can think that could be an issue is that Ex2010 is still up and running, could it be that Management Tools is looking at the old server, instead of the new?
Can anyone point me in the right direction with this one?
I can post more info if required.
Thank you.
Xpost here: http://serverfault.com/questions/666054/exchange-server-2013-toolbox-mmc-error-consoleinitialize-ps1-not-recognised

Hi,
If the EMS and EMC work properly, I think the powershell cannot be the problem. Is it possible to build up a new Exchange 2013 Server in test environment and make a replacement of
the ConsoleInitialize.ps1 file?
Thanks,
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Simon Wu
TechNet Community Support

DPM MMC Error

Hi there
I'm having a problem on my Systems Center DPM server when using the management console. Each time I click on "Recovery" or when I click on "Management" I get the following error:
"MMC has stopped working"
I am running Microsoft System Center 2012 R2
This is the message in Event Viewer:
The description for Event ID 999 from source MSDPM cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
An unexpected error caused a failure for process 'mmc'. Restart the DPM process 'mmc'.
Problem Details:
<FatalServiceError><__System><ID>19</ID><Seq>0</Seq><TimeCreated>2/9/2015 10:20:27 AM</TimeCreated><Source>DpmThreadPool.cs</Source><Line>163</Line><HasError>True</HasError></__System><ExceptionType>NullReferenceException</ExceptionType><ExceptionMessage>Object
reference not set to an instance of an object.</ExceptionMessage><ExceptionDetails>System.NullReferenceException: Object reference not set to an instance of an object.
at Microsoft.Internal.EnterpriseStorage.Dls.UI.ObjectModel.LibraryManagement.Drive.ReadGlobalProperties(OMSqlContext sqlContext)
at Microsoft.Internal.EnterpriseStorage.Dls.UI.ObjectModel.LibraryManagement.TapeDrive.ReadGlobalProperties(OMSqlContext sqlContext)
at Microsoft.Internal.EnterpriseStorage.Dls.UI.ObjectModel.LibraryManagement.Library.UpdateDriveInformation(OMSqlContext sqlContext)
at Microsoft.Internal.EnterpriseStorage.Dls.UI.ObjectModel.LibraryManagement.Library.GetDriveCollection()
at Microsoft.Internal.EnterpriseStorage.Dls.UI.Cmdlet.GetLibrary.RemoveSpuriousStandaloneTapeLibraries(DpmServer dpmServer)
at Microsoft.Internal.EnterpriseStorage.Dls.UI.Cmdlet.GetLibrary.CallBack(Object[] paramsList)
at Microsoft.Internal.EnterpriseStorage.Dls.UI.Cmdlet.GetLibrary.ProcessRecord()
at System.Management.Automation.CommandProcessor.ProcessRecord()</ExceptionDetails></FatalServiceError>
the message resource is present but the message is not found in the string/message table

Hi,
please try this walkthrough:
https://support.microsoft.com/kb/3008149
Seidl Michael | http://www.techguy.at | twitter.com/techguyat |
facebook.com/techguyat |
youtube.com/techguyat

SAp J2ee Engine-Could not open MMC: error"could not open libsapu16vc71.dll"

Hi,
When I am trying top open MMC console to start the server getting an dialog box error "Could not open libsapu16vc71.dll". If I click OK its terminating.
Any body have idea where I need to check the logs regarding this?
please check this and help me.
Thanks
Venkat.

Hi,
Check following link.
[Re: Can't access MMC;

Nokia 6120 MMC error msg - file corrupted

I've programmed a security code for my memory card and now I get an error message saying that my memeory card is corrupted and i should reformat. It's a brand new phone and i haven't had time to back up my MMC to the P.C. Don't want to loose the info on the card. What now?

You might be able to salvage some files in your corrupted memory card by getting hold of a software that is bundled with digital cameras for recovering files on a memory card. There are freeware versions that works the same way on the web but you must have also a memory card reader to be connected to a PC/Laptop to run this program.
Knowledge not shared is knowledge wasted!
If you find it helpfull, it's not hard to click the STAR..

Deployment Workbench MMC Error

Problem,
I am getting MMC console error while opening deployment Workbench at few locations.
Error:
MMC has detected an error in a snap-in and will unload it
FX:-{ffb8695a-66b4-4929-abb6-15cb8bd2ae3d}
Type 'Microsoft.BDD.Workbench.WrapperException' in assembly
Exception type:
System.Runtime.serialization.SerializationException
Thanks in Advance
Dinesh Vinay
Thanks & Regards, Dinesh Sundaram

I've just had this issue. Here's how I fixed it.
PS C:\> Import-Module 'C:\Program Files\Microsoft Deployment Toolkit\Bin\MicrosoftDeploymentToolkit.psd1'
PS C:\> Get-MDTPersistentDrive
Name Path Description
DS001 \\Server01/Distribution MDT Deployment Share
PS C:\> Remove-MDTPersistentDrive -Name DS001
Messed up rights to the remote server share or something.
Blog: http://scriptimus.wordpress.com

ADUC MMC error in Windows Server 2012

That is not true at all. It works just fine with server 2012. There are some things like IE settings for 10 that do not show up unless you are running WIndows 8

Full error message:
MMC cannot open the file C:\Windows\System32\dsa.msc
This may be because the file does not exist, is not an MMC console, or wascreated by a later version of MMC. This may also be because you do not havesufficient rights to the file.
I have been encountering this error on our 2012 DC for the past two weeks orso. All Administrative accounts are affected by this error. No one can run theADUC MMC. (we have another DC we're doing our work from)
If I create a new MMC and add the snap in - it works. I just cannot open thebuilt in ADUC console. (sites and services and domains and trusts both workfine btw) I have spent several hours trying fixes I have managed to findthrough google, all to no avail. Has anyone encountered this error and actuallybeen able to fix it?
tried SFC, replacing the dsa.msc from another server, checked...
This topic first appeared in the Spiceworks Community

E71 - MMC error during decrypion

Hi,
I am not native English user so forgive me some strange sentences. I hope You do.
Let's go to a problem:
I wanted to decrypt MMC in my E71 and during operation phone did off and then on and asked for SIMCODE. I put it and it came back and started encrypting card.
When I decrypeted MMC there are some files I can not read. I did an imge of it as You do the disc image. If I put this image back- the MMC_Tool Software asked for format (I did it) and it restore an image to the card. The image takes the same space as card was full but the files are not readable. I have a big folder FOUND.0000 with files *.CHK and the other folders like images, videos etc- whole not openable with 32 kB space.
Do You have any ideas what to do to have the data back?
Thaks in advanec for advices.

Hi Umadevi,
I too uninstalled the entire setup and started a fresh installation. but even then it stops at the same point (Deploy via SDM/J2EE Engine).
can u please tell me one thing do i need to congiure my server before staring installtion..
means i already configured my MS Loopback adapter and started all the services in administration tools also but agian it shows the same error.
and do we need to restart the server after every installation..
can u please send me the step by step details::
bye
G.Srinivas

MMC error: "Stop failed: 2 Invalid Credentials"

Hi,
When I want to stop an instance using MMC, after I type the credentials in the "WebService Authentication" box I get the error:
Stop failed: 2
Invalid Credentials
The user does have sufficient AIX rights on sapstartsrv, so what could be the problem?

I use the adm user. Which logs should I provide because I can´t seem to find a log that tracks the MMC steps.

SAP MMC error - MMC Could not create the snap in

I installed 3 new instances on a new server, and i get the following errors.
MMC Could not create the snap-in
MMC could not create the snap-in, the snap-in might not have been installed correctly.
Name SAP System Manager
CLSID: {633547ee-A302-11D1-Ae59-080009b07dbb}
Any Ideals.

Hi,
I got the exactly the same error. I installed GUI 7.10, and I installed the latest MMC but during installation of MMC was prompted that current version is allready newer.
Do you got some more specific answer on how did you solve this issue?
Thanks!
Best regards,
Jacco Raymakers.

Again SAP MMC Error

Hi
      I stopped SAP MMC thru   all tasks -> stop
      Later when   I used all tasks->start
Servers are not started Even after 2 hrs
What could be the reason and
qpkdk137807\saploc\J2E\JC00\work\dev_jcontrol.log contains following information
-> arg[06] = -syncSem=JSTARTUP_WAIT_ON_2240
-> arg[07] = -jvmOutFile=C:\usr\sap\J2E\JC00\work\jvm_bootstrap.out
-> arg[08] = -stdOutFile=C:\usr\sap\J2E\JC00\work\std_bootstrap.out
-> arg[09] = -locOutFile=C:\usr\sap\J2E\JC00\work\dev_bootstrap
-> arg[10] = -mode=BOOTSTRAP
-> arg[11] = pf=C:\usr\sap\J2E\SYS\profile\J2E_JC00_qpkdk137807
-> lib path = PATH=C:\j2sdk1.4.2_08\jre\bin\server;C:\j2sdk1.4.2_08\jre\bin;c:\sapdb\programs\bin;c:\sapdb\programs\pgm;c:\j2sdk1.4.2_08\bin;.;c:\sapdb\programs\bin;c:\sapdb\programs\pgm;c:\j2sdk1.4.2_08\bin;.;%path%;C:\usr\sap\J2E\SCS01\exe;C:\usr\sap\J2E\JC00\exe;C:\usr\sap\J2E\SYS\exe\run
-> exe path = PATH=C:\j2sdk1.4.2_08\bin;C:\usr\sap\J2E\JC00\j2ee\os_libs;c:\sapdb\programs\bin;c:\sapdb\programs\pgm;c:\j2sdk1.4.2_08\bin;.;c:\sapdb\programs\bin;c:\sapdb\programs\pgm;c:\j2sdk1.4.2_08\bin;.;%path%;C:\usr\sap\J2E\SCS01\exe;C:\usr\sap\J2E\JC00\exe;C:\usr\sap\J2E\SYS\exe\run
[Thr 2244] Tue Jan 10 12:29:08 2006
[Thr 2244] *** ERROR => invalid return code of process [bootstrap] (exitcode=66) [jstartxx.c   1433]
[Thr 2244] JControlExecuteBootstrap: error executing bootstrap node [bootstrap] (rc=66)
[Thr 2244] JControlCloseProgram: started (exitcode = 66)
[Thr 2244] JControlCloseProgram: good bye... (exitcode=66)
Regards
Rakesh

Hi,
Have you checked up , if all the services have been started .
Check up if the main services are started ,such as
SAP<instance>_00
SAP<instance>_01
SaposCol
SecondaryLogon
Server
Distributed File System
Computer Browser
Also verify if the database instance is started.
If it is fine,Try manually starting jcontrol.
It will give you a message on why it cannot start.Let us examine further after that.
Please check up the bootstrap logs
Regards,
Harish

SAP MMC error.

Hi,
I am getting this error while starting the SAP BI 7.0 Server.
Please check the below trace file. I am only pasting half of the trace file.
Please help me how to resolve the issue.
trc file: "dev_disp", trc level: 1, release: "700"
sysno      03
sid        DEV
systemid   560 (PC with Windows NT)
relno      7000
patchlevel 0
patchno    114
intno      20050900
make:      multithreaded, Unicode, optimized
pid        9056
Tue Feb 09 02:27:52 2010
kernel runs with dp version 229000(ext=109000) (@(#) DPLIB-INT-VERSION-229000-UC)
length of sys_adm_ext is 576 bytes
SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (03 9056) [dpxxdisp.c   1239]
     shared lib "dw_xml.dll" version 114 successfully loaded
     shared lib "dw_xtc.dll" version 114 successfully loaded
     shared lib "dw_stl.dll" version 114 successfully loaded
     shared lib "dw_gui.dll" version 114 successfully loaded
     shared lib "dw_mdm.dll" version 114 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3903
Tue Feb 09 02:27:57 2010
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 5 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 5361]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not activeDpIPCInit2: start server >sapdev_DEV_03                           <
DpShMCreate: sizeof(wp_adm)          15800     (1436)
DpShMCreate: sizeof(tm_adm)          4232256     (21056)
DpShMCreate: sizeof(wp_ca_adm)          24000     (80)
DpShMCreate: sizeof(appc_ca_adm)     8000     (80)
DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528056/528064
DpShMCreate: sizeof(comm_adm)          528064     (1048)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm)          0     (96)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm)          0     (72)
DpShMCreate: sizeof(vmc_adm)          0     (1536)
DpShMCreate: sizeof(wall_adm)          (38456/34360/64/184)
DpShMCreate: sizeof(gw_adm)     48
DpShMCreate: SHM_DP_ADM_KEY          (addr: 07460040, size: 4889440)
DpShMCreate: allocated sys_adm at 07460040
DpShMCreate: allocated wp_adm at 07462090
DpShMCreate: allocated tm_adm_list at 07465E48
DpShMCreate: allocated tm_adm at 07465E78
DpShMCreate: allocated wp_ca_adm at 0786F2B8
DpShMCreate: allocated appc_ca_adm at 07875078
DpShMCreate: allocated comm_adm at 07876FB8
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 078F7E78
DpShMCreate: allocated gw_adm at 078F7EB8
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 078F7EE8
DpShMCreate: allocated wall_adm at 078F7EF0
MBUF state OFF
DpCommInitTable: init table for 500 entries
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation view
<EsNT> Using memory model view.
<EsNT> Memory Reset disabled as NT default
<ES> 1023 blocks reserved for free list.
ES initialized.
J2EE server info
start = TRUE
state = STARTED
pid = 8164
argv[0] = D:\usr\sap\DEV\DVEBMGS03\exe\jcontrol.EXE
argv[1] = D:\usr\sap\DEV\DVEBMGS03\exe\jcontrol.EXE
argv[2] = pf=D:\usr\sap\DEV\SYS\profile\DEV_DVEBMGS03_sapdev
argv[3] = -DSAPSTART=1
argv[4] = -DCONNECT_PORT=3963
argv[5] = -DSAPSYSTEM=03
argv[6] = -DSAPSYSTEMNAME=DEV
argv[7] = -DSAPMYNAME=sapdev_DEV_03
argv[8] = -DSAPPROFILE=D:\usr\sap\DEV\SYS\profile\DEV_DVEBMGS03_sapdev
argv[9] = -DFRFC_FALLBACK=ON
argv[10] = -DFRFC_FALLBACK_HOST=localhost
start_lazy = 0
start_control = SAP J2EE startup framework
DpJ2eeStart: j2ee state = STARTED
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG CPS=> DpLoopInit, ICU ( 3.0 3.0 4.0.1) [dpxxdisp.c   1629]
Tue Feb 09 02:27:58 2010
***LOG Q0K=> DpMsAttach, mscon ( sapdev.visu.com) [dpxxdisp.c   11753]
DpStartStopMsg: send start message (myname is >sapdev_DEV_03                           <)
DpStartStopMsg: start msg sent
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
Tue Feb 09 02:27:59 2010
CCMS: Initalizing shared memory of size 60000000 for monitoring segment.
Tue Feb 09 02:28:01 2010
CCMS: start to initalize 3.X shared alert area (first segment).
DpJ2eeLogin: j2ee state = CONNECTED
DpMsgAdmin: Set release to 7000, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c   1050]
DpMsgAdmin: Set patchno for this platform to 114
Release check o.K.
Tue Feb 09 02:28:38 2010
ERROR => W0 (pid 8240) died [dpxxdisp.c   14441]
ERROR => W1 (pid 7912) died [dpxxdisp.c   14441]
ERROR => W2 (pid 6280) died [dpxxdisp.c   14441]
ERROR => W3 (pid 6868) died [dpxxdisp.c   14441]
my types changed after wp death/restart 0xbf --> 0xbe
ERROR => W4 (pid 8396) died [dpxxdisp.c   14441]
my types changed after wp death/restart 0xbe --> 0xbc
ERROR => W5 (pid 3196) died [dpxxdisp.c   14441]
my types changed after wp death/restart 0xbc --> 0xb8
ERROR => W6 (pid 7916) died [dpxxdisp.c   14441]
ERROR => W7 (pid 6012) died [dpxxdisp.c   14441]
ERROR => W8 (pid 7232) died [dpxxdisp.c   14441]
my types changed after wp death/restart 0xb8 --> 0xb0
ERROR => W9 (pid 3224) died [dpxxdisp.c   14441]
my types changed after wp death/restart 0xb0 --> 0xa0
ERROR => W10 (pid 3648) died [dpxxdisp.c   14441]
my types changed after wp death/restart 0xa0 --> 0x80
DP_FATAL_ERROR => DpWPCheck: no more work processes
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
NiWait: sleep (10000ms) ...
NiISelect: timeout 10000ms
NiISelect: maximum fd=1589
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Feb 09 02:28:48 2010
NiISelect: TIMEOUT occured (10000ms)
dump system status
Workprocess Table (long)               Mon Feb 08 20:58:48 2010

might be you are running out of memory

VMS- IDS MMC error message

Hi, I have IDS 4215 and a VMS, i had no free space problem on the machine and i solved it, now when i try to run anyservice within the IDS MMC such as editing the signatures configuration or diplaying the sensors that are supposed to be added to the sensor group, i got the following message:
"The list of monitored devices couldn't be loaded from the database, IDSSystem unable to create SQL statement: null"
So how can i solve this problem and restore the functionality of the VMS , until now i cannot even see the sensor which i added before in the VMS although i can ping it successfuly .
Regards

This is normally caused if the size of the database or the amount of free space is very very low. You stated that free space reached a very low level and you solved it. Make sure that you free up some more space and then check the status..

MMC Error : Abap WP node

HI,
I am unable to find abap work procress node in the MMC.
How can i retrive it, But the server is up. this occured during upgrade.
I am able to login to the system on SAP level..
Regards,
Mag.

Hi,
Follow the steps to add the system in MMC console.
1) Go to dos prompt: -
\usr\sap\<SID>\exe\uc\NTI386 & execute the command sapstartsrv
2) Give the details & user as SAP Service<SID> & click on the checkbox of Use Environment & there give user as <sid>adm
3) Add for all the instances, which are running on the same server& then open SAPMMC console & start the server.
Please reward points if usefull
Regards,
Rakesh.

Exchange 2013 EMS throwing Access Denied error and Toolbox giving MMC error

Hi,
I am getting a very strange problem with an Exchange 2013 server deployed at a customer's site. After some hours of usage, EMS or Toolbox will not open and will throw below errors. However, if I restart the server, everything works fine for some hours before
the error start coming again. This does not affect mail flow or ECP but, I wonder if something is going wrong in the background and may cause a severe failure in future.
I tried hard but could not find the source of the problem.
EMS error:
VERBOSE: Connecting to CARISSA.skc.mru.
New-PSSession : [carissa.skc.mru] Connecting to remote server carissa.skc.mru failed with the following error message
: Access is denied. For more information, see the about_Remote_Troubleshooting Help topic.
At line:1 char:1
+ New-PSSession -ConnectionURI "$connectionUri" -ConfigurationName Microsoft.Excha ...
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : OpenError: (System.Manageme....RemoteRunspace:RemoteRunspace) [New-PSSession], PSRemotin
gTransportException
+ FullyQualifiedErrorId : AccessDenied,PSSessionOpenFailed
VERBOSE: Connecting to CARISSA.skc.mru.
New-PSSession : [carissa.skc.mru] Connecting to remote server carissa.skc.mru failed with the following error message
: Access is denied. For more information, see the about_Remote_Troubleshooting Help topic.
At line:1 char:1
+ New-PSSession -ConnectionURI "$connectionUri" -ConfigurationName Microsoft.Excha ...
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : OpenError: (System.Manageme....RemoteRunspace:RemoteRunspace) [New-PSSession], PSRemotin
gTransportException
+ FullyQualifiedErrorId : AccessDenied,PSSessionOpenFailed
VERBOSE: Connecting to CARISSA.skc.mru.
New-PSSession : [carissa.skc.mru] Connecting to remote server carissa.skc.mru failed with the following error message
: Access is denied. For more information, see the about_Remote_Troubleshooting Help topic.
At line:1 char:1
+ New-PSSession -ConnectionURI "$connectionUri" -ConfigurationName Microsoft.Excha ...
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : OpenError: (System.Manageme....RemoteRunspace:RemoteRunspace) [New-PSSession], PSRemotin
gTransportException
+ FullyQualifiedErrorId : AccessDenied,PSSessionOpenFailed
VERBOSE: Connecting to CARISSA.skc.mru.
New-PSSession : [carissa.skc.mru] Connecting to remote server carissa.skc.mru failed with the following error message
: Access is denied. For more information, see the about_Remote_Troubleshooting Help topic.
At line:1 char:1
+ New-PSSession -ConnectionURI "$connectionUri" -ConfigurationName Microsoft.Excha ...
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : OpenError: (System.Manageme....RemoteRunspace:RemoteRunspace) [New-PSSession], PSRemotin
gTransportException
+ FullyQualifiedErrorId : AccessDenied,PSSessionOpenFailed
VERBOSE: Connecting to CARISSA.skc.mru.
New-PSSession : [carissa.skc.mru] Connecting to remote server carissa.skc.mru failed with the following error message
: Access is denied. For more information, see the about_Remote_Troubleshooting Help topic.
At line:1 char:1
+ New-PSSession -ConnectionURI "$connectionUri" -ConfigurationName Microsoft.Excha ...
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : OpenError: (System.Manageme....RemoteRunspace:RemoteRunspace) [New-PSSession], PSRemotin
gTransportException
+ FullyQualifiedErrorId : AccessDenied,PSSessionOpenFailed
Failed to connect to an Exchange server in the current site.
Enter the server FQDN where you want to connect.:
Hope someone has a solution to this.
Pramod

Hi
It can be possibly a WIN RM Issue. Run
winrm quickconfig and see whether u are able to connect
If you are unable to connect then Try reinstalling the WinRM
Import-Module ServerManager
Remove-WindowsFeatureWinRM-IIS-Ext
Add-WindowsFeatureWinRM-IIS-Ext
Also check if you have a certificate assigned to the Default Web Site - HTTPS Binding/Port 443, and Exchange
Back End web site - HTTPS binding/Port 444
Remember to mark as helpful if you find my contribution useful or as an answer if it does answer your question.That will encourage me - and others - to take time out to help you Check out my latest blog posts on http://exchangequery.com Thanks Sathish
(MVP)

MMC Error

Similar Messages

Maybe you are looking for