MMC Password Problem for E71 and Possible Solution

Hi,
I wanted to share with you the following (took me some time to figure it out...).
On E71 there is a possibiity to remotely lock the phone via an SMS with a specific code you can define. Now if you didn't protect the MMC with an own password before, after the remote lock, the MMC will become protected and the password for it is the SMS code you used for the remote lock. Note that the SMS code doesn't have to be the same as the code with which you unlock the phone itself after the remote lock (except of course if you define them both to be the same).
I hope it helps, at least for some cases. Funny that this is not described in any manual or whatsoever (at least I couldn't find it)....
This was tested on the E71-1 (33), RM-346, product code 0558786), FW Version 100.07.76, with an original Nokia 8GB microSD-HC MMC memory card.
Cheers,
dubi
Solved!
Go to Solution.

I had this same problem. My memory card suddenly getting corrupted, but I managed to solve it. I believe the source of the problem is the Remote Lock and the Device Lock of the unit. I have an E63 unit (same as E71).
The problem started after I enabled the Device Lock and Remote Lock of my E63 unit. After a couple of hours, I tried to manage my apps in the memory card. To my surprise, it's corrupted! I didn't panic because I believe I could retrieve the files with my PC. But when I inserted my memory card to a memory reader into my PC, the card is unreadable. I had a feeling that the card is really corrupted. But how? I just got this unit almost a day ago. I didn't do anything odd. I'm an OOP-Design Patterns oriented programmer so I'm not newbie when it comes to best practices.
As I searched the web, I found that there are cases too that had this same exact problem. And their guess is also the Device Lock.
So what I did is I disable the Remote Lock and the Device Lock. I checked my memory card and it's still corrupted!
So, I turn off my unit and turn it on again, it's still corrupted!
I removed the memory card while the unit is on (Make sure you use the remove memory card feature of your unit!!!) and then reinserted the card, and it worked.
In summary, to solve this memory corrupted problem. Try disabling the Remote Lock and Device Lock. To disable the Device Lock, revert the password to "12345" (Do not type the quotes). Remove the memory card (Use the remove memory card feature of your unit!!!). Re-insert card and problem fixed.

Similar Messages

Why does Apple not give a list of error messages and possible solutions? I have the (-54) error continually that has suddenly appeared and cannot find a solution, even though other users seem to have the same problem.

Why does Apple not give a list of error messages and possible solutions? I have the (-54) error continually that has suddenly appeared and cannot find a solution, even though other users seem to have the same problem.

This is a user to user forum. Apple isn't here and won't answer you. You need to contact Apple directly. You can use the Contact button at the bottom of the screen.

TS1559 I have this problem explained above, and the solution that is given on this website didn´t work for me. I need help...

iOS: Wi-Fi settings grayed out or dim - Apple Support
I have this problem explained above, and the solution that is given on this website didn´t work for me. I need help...

iOS: Wi-Fi or Bluetooth settings grayed out or dim
One user reported that placing the iPod in the freezer fixed the problem.
Also heating sometimes works. See:
Why can't I select my wifi settings?
A trick that works frequently with iPhones:
Settings > AirPlane Mode ON, Do Not Disturb ON
Power down and wait 5-10 minutes
Power up
Settings > AirPlane Mode OFF, Do Not Disturb OFF
If not successful, an appointment at the Genius Bar of an Apple store is usually in order.
Apple Retail Store - Genius Bar

Password Problem for some applications:

Password Problem for some applications: I'm unable to download Adobe Reader, Microsoft updates. I have no password set to start the computer, applications such as Pages, Numbers, Keynote require no password for updates.
When I try to update Microsoft or Adobe Reader, first I try with no password, I get a hint and I know exactly what it means, but still unable to download. I don't know enough about passwords as to why some I can download and others I can't. So I don't know what I should read. I'm the only user of this computer and prefer not to have to deal with passwords. I'm using a MacBook Pro, Mac OS 10.9.3

Oh what a tangled web we weave. I read up on keychain and I don't understand what I'm reading. Right now I cannot download my email on my computer, I can access it through the cloud. I'm sure it will be the same for the other iCloud feathers. When I go to preferences and select iCloud when ever I try to sign in I get some dialog box it shows up "A keychain cannot be found to store 1076701306. It doesn't matter whether I reset it or cancel it out iCloud preferences remains grayed out.
In keychain access on the left side under keychains and Read's local item, systems, and systems roots.
When I select local items nothing shows up to the right under the name column even when down under all items is selected nothing shows up. And nothing shows up to the right when under categories I selected the other options password etc. On the other hand when I select under keychains systems, systems roots I do get items to show up on the right side under names under all items, passwords, etc. Where do I start?

So is it just me, or is Mavericks a bust? My MBP runs way hotter now. I don't have time for trial and error solutions. Is Apple offering a way to downgrade back to Mountain lion? I want out of Mavericks ASAP.

So is it just me, or is Mavericks a bust? My MBP runs much hotter since the upgrade. Why do I need ot sit around watching Activity Monitor, manually controlling my fans, and deleting extensions that I enjoy using. Don't even get me started on the Quicktime/Mov issues. I had none of these issues on Mountian Lion. Searching these forums, I see it's not just me. Why would Apple release a new system w/o peoperly testing it on MBPs?
I don't have time for trial and error solutions. I've tried the obvious ones. No help. Is Apple offering a way to downgrade back to Mountain lion? Or better yet, a Mavericks update that adresses these problems? As of now, I want out of Mavericks ASAP.
My processor is 2.6 GHz Intel Core i7.
8 GB 1600 MHZ DDR3 memory.
13inch MBP purchased ust over a year ago- 1-13.

jonny a wrote:
Nope, it'a not just me, see above. And yup- I'm backed up, But I don't own a Mountain lion install disc. That's why I was posting here in the first place. Thanks
Nobody owns a ML install disc - ML was only ever distributed as a download from the Mac App Store.
If you have a Time Machine backup, you can boot into recovery mode and restore from your Moutain Lion TM backup volume. If you have a system clone, then you can boot from the clone, and just clone ML back onto your internal drive.
Going back to your previous installation from a backup should be trivially simply if you have the backup in hand.

I will be buying the new IMac 27 inch in December. Would like input on the best configuration for photographic and possibly video processing-dream machine!

I will be buying an IMac 27 inch in December. What is the best configuration for photo and possibly video processing.Does one need a Mac Pro? Dream machine!

Just to explain what I just wrote to Laundry Bleach:
Why is there no iDVD on my new Mac?
https://discussions.apple.com/docs/DOC-3673
UPDATE & ADDENDUM:
But even though you can still buy iLife 11 that includes iDVD 7 from Amazon, Apple now make it difficult to install:
Poster jhb21939 posted this in another thread:
“when I attempted to load iDVD into a new iMac. A notice came up on the screen stating that the 'Authorisation Licence' had expired on 25 March this year (2012).
I contacted the Apple support team and eventually, I was told that the Licence had been withdrawn and could no longer be used.”
In other words Apple are now so adamant that we don’t use iDVD that they have tried to make it impossible to install.
In response, Old Toad posted this solution:
“You can still use it one all of your Macs. If you get an invalid certificate message just set your Mac's clock to sometime before early 2011 and run the installer. After you're done reset the time back to the correct time.” He added this comment:
“It began after iDVD and iWeb were discontued and they were dropped from the Apple Store. All I can think of is the certificate was set to expire after a certain time period after the intitial iLife disc was released.
I've been able to use the installer even without setting back the date. I just clicked on the Continue button and it would work as expected. For some it would not continue unless the date was set back.”
The latest anorexic iMacs just announced do not even include a CD drive! Proof positive that Apple virtually prohibit the use of DVDs - although the newly announced Mac Minis do include a Superdrive.
Yet, they still include iMovie! Heaven alone knows or understands what you are supposed to do with your newly edited masterpiece - except make a low quality version for YouTube?

IPhoto -share to email not working-The email server didn't recognize your username/password combination- for hotmail and big pond- since apple technical support re-hotmail on iPhone.

iPhoto -share to email not working-The email server didn’t recognize your username/password combination- for hotmail and big pond- since apple technical support re-hotmail on iPhone.

in the iPhoto preferences ==> accounts delete your e-mail account and reenter it
OR
IMHO the better solution is to set Apple mail as the email client in the iPhoto preferences
LN

I have an Ipad My apple ID and password works for Ibooks and Icloud but when I try to get into the app store it doesn't show my entire email address on the account. When I try to get into the app store it tells me my password is incorrect. How can I corr

I have an Ipad My apple ID and password works for Ibooks and Icloud but when I try to get into the app store it doesn't show my entire email address on the account. When I try to get into the app store it tells me my password is incorrect. How can I correct this? I have been emailing support but so far they have been no help

Open the App Store app, go to the Featured pane, swipe to the bottom, tap the Apple ID and sign out. Tap again and sign in with the Apple ID of your choosing.

How to enable password request for restart and shutdown?

Hi,
I'm neither a Linux nor an Arch Linux newbie, but inexperienced regarding this particular issue.
I want to enable password request for restart and shutdown and want to know if I'm mistaken, because trial and error might become to time-consuming while working on a project.
I read https://wiki.archlinux.org/index.php/Al … o_shutdown.
$ ls -hAl /usr/bin/shutdown
lrwxrwxrwx 1 root root 9 Apr 22 03:02 /usr/bin/shutdown -> systemctl
If I try to run $ shutdown -hP 28 or $ shutdown -c nothings happens, I need to run $ sudo shutdown -hP 28 and $ sudo shutdown -c and type a password. That's the way I want it.
If I e.g. run $ shutdown -r now no password is needed. I want to disable this. It should behave the same way as shutdown -hP/-c behave. I want to type
$ sudo shutdown -r now or $ sudo systemctl reboot etc. and then the password should be required.
$ sudo grep -vn "#" /etc/sudoers | grep [[:blank:]]
72:root ALL=(ALL) ALL
73:rocketmouse ALL=(ALL) ALL
The user "rocketmouse" should have all permissions after typing a password, but not without typing the password.
IIUC what's written at https://wiki.archlinux.org/index.php/Polkit, I need to edit
$ pkaction | grep login
org.freedesktop.accounts.set-login-option
org.freedesktop.login1.attach-device
org.freedesktop.login1.flush-devices
org.freedesktop.login1.hibernate
org.freedesktop.login1.hibernate-ignore-inhibit
org.freedesktop.login1.hibernate-multiple-sessions
org.freedesktop.login1.inhibit-block-idle
org.freedesktop.login1.inhibit-block-shutdown
org.freedesktop.login1.inhibit-block-sleep
org.freedesktop.login1.inhibit-delay-shutdown
org.freedesktop.login1.inhibit-delay-sleep
org.freedesktop.login1.inhibit-handle-hibernate-key
org.freedesktop.login1.inhibit-handle-lid-switch
org.freedesktop.login1.inhibit-handle-power-key
org.freedesktop.login1.inhibit-handle-suspend-key
org.freedesktop.login1.power-off
org.freedesktop.login1.power-off-ignore-inhibit
org.freedesktop.login1.power-off-multiple-sessions
org.freedesktop.login1.reboot
org.freedesktop.login1.reboot-ignore-inhibit
org.freedesktop.login1.reboot-multiple-sessions
org.freedesktop.login1.set-user-linger
org.freedesktop.login1.suspend
org.freedesktop.login1.suspend-ignore-inhibit
org.freedesktop.login1.suspend-multiple-sessions
org.freedesktop.machine1.login
IOW I need to replace every yes and no etc. with auth_admin in $ grep -v lang /usr/share/polkit-1/actions/org.freedesktop.login1.policy.
Am I mistaken?
Regards,
Ralf

You'll need to create a rules file which uses javascript.
https://wiki.archlinux.org/index.php/Po … tion_rules
// /etc/polkit-1/rules.d/10-admin-shutdown-reboot.rules
polkit.addRule(function(action, subject) {
if (action.id == "org.freedesktop.login1.power-off" ||
action.id == "org.freedesktop.login1.power-off-ignore-inhibit" ||
/*...SOME_MORE_IDS_HERE...*/
// return polkit.Result.AUTH_ADMIN_KEEP;
return polkit.Result.AUTH_SELF_KEEP;
Last edited by progandy (2015-06-21 17:42:35)

8.0.2 - problem 1 - unable to scroll screen when the keyboard is present. Huge problem for emails and other cloud based providers that allow for data entry. We need a fix ASAP!

8.0.2 - problem 1 - unable to scroll screen down or up when the keyboard is present. When typing text, I am unable to see the text I am writing due to this problem. Huge problem for emails and other cloud based providers that allow for data text entry. While the keyboard is present, I am unable to scroll down to see the text, the screen automatically scrolls back up to the top of the screen. We need a fix ASAP!

Have you tried resetting your iPad? You will not lose any data. Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

Hi everybody, adobe muse does not start at the first attempt after installation. know the reason and possible solution? (on iMac 27 retina - latest edition)

Hi everybody, adobe muse does not start at the first attempt after installation. know the reason and possible solution? (on iMac 27 retina - latest edition)

Hi
Are you still experiencing the issue or is it fixed now?

Password Safe for Pre2 and PC

I'm looking for a tool to store all my passwords etc. to have them available on my Pre2 and also on my PC (even if syncing them obviously is not possible automatically in webOS - which is a standard in Windows Mobile!). Up to now I only found SecuStore having both a webOS and a Windows client. Unfortunately the Windows version is 0.0.5 and I would not like to hand over my sensible data to such an Alpha version.
Does anyone have any other recommendations?
Post relates to: Pre 2 p102ueu (Unlocked EU)

If your OS for the PC is Windows XP, then you will require SP1 for WPA and SP2 for WPA2. If you're already at either of these service pack levels, then the problem might be one of two things:
o The PC wireless configuration, or
o The PC's wireless chipset.
Check out the following iFelix article on connecting a PC to an AirPort wireless network: Accessing a Airport Network with a Windows XP PC or laptop (with XP SP2) You'll see that he has several other helpful Windows links as well.

GMail and Mail 2 Step App Specific Passwords ( one for address and one for SMTP or just address...?)

when i have GMail setup as an IMAP account and synced up to my iPhone (iOS 7) MBP (Mavericks) and Mac Pro (Lion) - do i have to enter ONE "application specific password" for the EMAIL ACCOUNT and /another/ one for the SMTP server or do i just enter ONE for the email account?
all my account (GMail and otherwise) are constantly having problems in mail and i would like to resolve this single issue before i move on to troubleshooting other problems.
also. turning off two step verification is not a possibility for security reasons.
THANKS

when i have GMail setup as an IMAP account and synced up to my iPhone (iOS 7) MBP (Mavericks) and Mac Pro (Lion) - do i have to enter ONE "application specific password" for the EMAIL ACCOUNT and /another/ one for the SMTP server or do i just enter ONE for the email account?
all my account (GMail and otherwise) are constantly having problems in mail and i would like to resolve this single issue before i move on to troubleshooting other problems.
also. turning off two step verification is not a possibility for security reasons.
THANKS

Aperture 3 Hanging after upgrade and possible solution

In advance, sorry for the long post:
As many have reported already, I was also a user of Aperture staring at the beachball and finding my computer hanging completely up to the point I was ready to give it flight lessons for free. I might have done this to my MacBook Pro if I was not leaving for an overland trip to Capetown from the Netherlands in a Toyota Land Cruiser in 2 days. If you want to read about the trip: www.africaminded.com.
How did I solve the issue in my case? I hope it helps some of you.
*My aperture setup*
Before you go through all the steps below let me explain how my Aperture workflow was set up:
1. Projects in Aperture correspond to folders on my harddrives. The project folders in Aperture contain reference files to the fils on my harddrives. The folders on my harddrives have the same name as the projects in Aperture. Using the same name does not really matter much, except I find it easier to find images from aperture back on my harddrive without having to use aperture to find the images.
2. I do not have the images imported into an Aperture library because this alllows me to access the images with other applications than Aperture (Photoshop etc).
Preparations:
*Actions I took before I started with a clean Aperture:*
1. Launch Aperture with holding the shift key. This defers Aperture from processing images in the library. Tip from Apple website: http://support.apple.com/kb/HT3805
2. Show Keywords HUD and export the keyword list in a separate file onto the desktop
3. Create folder on desktop called "Exported Projects"
4. Drag project by project to the just created folder. Yes this is a painstaking long process and one I would have liked avoided but I did not find any other solution and needed one. Luckily I only had 44 projects to go through.
5. Close Aperture
6. Delete the user preferences
1. Quit Aperture if still running.
2. In the Finder go to ~/Library/Preferences. (The tilde "~" represents your Home folder).
3. Remove the "com.apple.Aperture.plist" file from the Preferences folder.
7. Move the user created presets, keyword lists, and so on...
1. Quit Aperture.
2. In the Finder, go to ~/Library/Application Support/Aperture.
3. Move the contents of this folder to your Desktop
8. Delete your old Aperture Library or move it to another harddrive. If possible do not empty the bin of your computer (just in case you need the library again - I did not after following all steps below).
9. Reinstall Aperture; Note: Make sure that you have your installation discs nearby before starting this.
1. Open the Applications folder.
2. Drag the Aperture application to the Trash.
3. Insert your Aperture installation disc and install Aperture.
4. When finished, choose Software Update from the Apple () menu to update your software to the latest version.
*Now your computer has a clean install of Aperture*
1. Launch Aperture
2. Show Keywords HUD and import the keyword list that you saved in a separate file on the desktop
3. Move the following files back into ~/Library/Application Support/Aperture:
1. Adjustment Chain Presets.plist
2. FileNamingPresets.plist
3. Metadata Presets.plist
4. MetadataSets.plist
4. Close Aperture and go to
Following the steps below allows you to keep all you metadata and rating as well. It is possible in Aperture 3 to read and import sidecar files containing metadata but this will not include the rating! So if you want to keep your metadata and your ratings, follow the steps below:
(*A) Importing Project*s
1. Launch aperture
2. File > Import >Library / Project
3. After selecting the exported project you want to import, confirm you want to merge the project
4. Which library should be used when a conflict is detected? Choose current library (and not the library/project you are importing).
5. Let Aperture take its time to merge the projects (depending on the size of the project you import this can take longer and you might see the famous beach ball for a few seconds). In the beginning it will look like Aperture does nothing or hangs again.
6. After merging the libraries are completed Close Aperture.
7. Launch Aperture and immediately select Window > Show Activity from the menu. Let Aperture process new previews (this should start automatically after opening Aperture). Show activity will give you an idea how far Aperture is when processing the images so you don't have to stress and stare at the spinning wheel in the bottom left corner.
8. After the processing has finished Close Aperture again to save the new previews and share them with iLife and iWork.
9. Repeat the above until you have imported all your projects. Remember to keep repeating step 6 to 9. This allows you to find out which project contains corrupted images or is corrupt and to deal with it separately. Importing all projects at the same time and then processing all pictures at the same time does not give you the opportunity to figure out how to get rid of the beachball!
*(B) What to do when images are corrupted in a project?*
In case you imported a project that was corrupted or contains corrupted images that causes Aperture to hang completely and slow down your computer to a complete halt:
1. Force quit aperture
2. Reopen aperture and immediately press the shift key after launching the program. Pressing the shift key stops Aperture from rendering/processing the images you imported from the "corrupted project".
3. Select the last imported projected (the one that contains 1 or several corrupted images and gave you the beachball again).
4. Delete the project and empty the trash in Aperture as well. Do not delete the master files associated with you referenced images.
5. Move the corrupted project into a folder called "Corrupted projects". Do not throw the corrupted project away - we will deal with this one later. Just make sure they are not part of the main library you are building.
6. Quit and launch aperture. Aperture should not be processing any images anymore as you already completed that with step 8 above.
7. Complete the importing of your projects following the exact steps above, skipping the corrupted project.
Ps. In my case I found 1 project with corrupted images.
*(C) What do you do with the corrupted projects?*
1. Make sure that Aperture is not yet running.
2. Double click the corrupted project and press the shift key to defer the processing of images. This will launch aperture and treat the project as an individual library.
3. Select all thumbnails and export masters to a new folder and select "Create IPTC4XMP Sidecar File" in the pulldown list where it says "Metadata" in the export window. You should now have all master images of this corrupted project and the sidecar files containing the metadata of these images in the same folder.
4. Quit Aperture
5. Press the Alt-Key/Option-Key and Launch Aperture. Aperture should now ask you which library you want to open. Select your Main Library that contains all the projects you imported following step 1-9 above.
6. Create a new project for the images you are going to import from step 3 of section C.
7. Import the images and move them to where you want them to have. Aperture should import the non-corrupted images including their metadata (as the sidecar file of these images is in the same folder as the images). All you have lost in this case is the rating and possibly the adjustment of these images. The IPTC data will be imported by Aperture in step 9 Section C. You could survive having to redo the rating manually. Redoing the adjustments is a bit of more work, sorry.
8. Quit Aperture.
9. Launch Aperture with pressing the alt-key or option-key and select your main library as in step 5 and select "Show Activity" from the menu. You are now back into step 7 of section A. Complete step7, step 8 and 9 of section A.
*D. Congrats*
1. When all projects have imported correctly delete the projects from your harddrive to gain space.
2. Delete the temporary Aperture library created in section C step 2.
3. Re-install plug ins that you might have moved in the preparation phase (if possible 64-bit versions if available)
Congrats. You now have a completely new and well functioning new Aperture 3 library that offers you all the new features and is very fast I should say. My machine: MacBook Pro 2.93GHz with 4GB Ram.
After you think you can trust Aperture again empty your bin to gain space on your computer.
How long did this take me? All in all about 3 days but not full time luckily. How many real corrupted images? None - something else in the project data was messing everything up.

WOW!
I'm REALLY impressed by your exhaustive and detailled description!
How long did it take to write? Sure longer than the import itself...
Thank you so much. I got a working import of Ap2 lib before but your description have me various hints for handling problematic or faulty projects.
Matt

Password problems with yahoo and mac mail

I am asked almost every time now to give my password and save to key chain. This works for one email send/receive then askes again even though ive stored it!!! HELP

you need to quit the mail application completely.
then open your utilities (located within the application folder in the finder window)
in the utilities open the keychain access
on the left side in the top section choose login and in the bottom section choose passwords
locate all passwords that are listed that pertain to the yahoo email address you're having this issue with
after you remove all the email passwords from the keychain, click on the word keychain in the top left corner and quit the keychain.
close the utilties and then reopen the mail app and when promprted for the password again enter it and choose to save to the keychain. this should resolve the issue you're having.

MMC Password Problem for E71 and Possible Solution

Similar Messages

Maybe you are looking for