MMC problem with IDS CS3 on x64 Windows 2008 Server

Hi,
I have installed IDS CS3 5.0.3 on Windows Server 2008 x64. It works fine on the command line and the service starts up OK. However, when I go to MMC and try to add the plug-in to configure my instances, the IDS plug-in is not in the list.
This is not a problem on a 32-bit installation. Therefore I assume it is something to do with 32/64 bit versions of MMC. (I had a similar issue with ODBC configuration, there are two configuration apps installed (32 and 64bit), one has a shortcut in the admin tools and I need the other one)
Can anyone shed any light on this or had the same problem?
And I can't go to CS4 yet.
thanks,
owen.

At a command prompt, try:
cd C:\Program Files (x86)\Adobe\Adobe InDesign CS3 Server
regsvr32 InDesignServerMMC64.dll
(substituting correct install path, if that isn't right)
Note 'InDesignServerMMC64.dll', not 'InDesignServerMMC.dll' - MMC requires an x64 compiled snap-in when run on an x64 OS.
That should bring up a dialog saying regsvr32 succeeded.You may need to have opened the console window as administrator for that to succeed on 2008 Server.
Then re-launch mmc.exe & it should appear.
-Brendan O'Shea

Similar Messages

Problem with update SCCM client to Sp1 CU3 on Windows 2008 server

Hi all,
I have problem with update SCCM client on Windows 2008 Server to 2012 Sp1 CU3. I have sent to deployment package with update (SP1 Cumulative Update 3 - server update) on four servers and after few minutes I have got in Monitoring\Deployment details four
this same errors in "Asset Details":
USER Message ID
Status type Description
NT\AUTHORITY\SYSTEM 1006
Error 3003
I love that types of error... which is har to find answer on google :-( I have tried but I haven't find any constructive :-( Did you met with something similar? Which log I should check (sorry - I'm still noob in SCCM2012) to update actual SCCM Client SP1
(5.00.7804.1000) to SP1 CU3 (5.00.7804.1400)?
Thank you.

I see in fodler with CU3 updates, are four packages:
- SP1 Cumulative update 3 - x64 client update
- SP1 Cumulative update 3 - x86 client update
- SP1 Cumulative update 3 - server update
- SP1 Cumulative update 3 - console update
It will be stupid but... maybe I should deploy x64 client update package?

How to install Cisco Work 3.2 on Windows 2008 Server Standard R2

Hi Everyone,
I have got Cisco Works LAN Management 3.2. But the problem is that i have a Windows 2008 Server Standard R2 and when i try to install, it fails. What I read from the below link is that it supports
"Windows 2008 Server Standard and Enterprise Edition with Service Pack 1 and 2. Both 32-bit and 64-bit operating systems are supported on the above versions."
http://www.cisco.com/en/US/partner/prod/collateral/netmgtsw/ps6504/ps6528/ps2425/data_sheet_c78-534877.html
Please help me out on how i should install on the Windows 2008 Server Standard R2. If there is any patch or any other way out.
Awaiting your response.
Farid

Hi ,
LMS 3.2 is not supported on Windows 2008 Server Standard R2.
here is the supported platoform for LMS 3.2
http://www.cisco.com/en/US/docs/net_mgmt/ciscoworks_lan_management_solution/3.2/install/guide1/prereq.html#wp1110367
Thanks,
Gaganjeet

Little Problem with Photoshop CS3

Hi, I have a little problem with Photoshop CS3, I'm not sure if this's because a Windows option that I messed up, but the thing is that I didn't touch any options, or some kind of preferences.
I'm talking about the "little windows" (I don't know the correct name) that come from, in this case, the Filter and Analysis options, they're coming down from their right side, and usually, the come down from their left side. This is really annoying.
Not big deal, but I can't really work properly. I hope you guys can help me, and this's my first post, I hope I didn't break any rule.

Thanks Mylenium, that was the problem, I don't even have a tablet, but that fixed my problem =)
Thanks again.

Problem with tv@nywhere plus on windows 8

hi
i have a problem with tv@anywhere plus on windows 8. i can setup the pvr plus app completely but when i open that and click on "watch and record dtv program" icon, i will see an error that says: "invalid class string!"
i think this problem should be for its driver because i'm using windows 8 64bit and the driver is for windows 7, i couldn't find an appropriate driver for windows 8 on MSI driver downloads, as matter of fact it didn't exist.
so what should i do for my problem?

I'm afraid TV@nywhere Plus is a bit outdated for Win8. There is no update so far since 2010. Could be MSI won't add Win8 support if it would be anyway possible.

Printing problems with InDesign CS3 running on OS 10.6

I recently upgrade my old G4 Mac (OS 10.4) to a new Mac Mini running OS 10.6.6. I am still running CS3 and have encountered only one problem. When I print multiple copies documents from InDesign that contain several layers, each copy is processed separately, so that it can take several minutes just to send the print job to the printer if I'm printing over 20 copies. Then once the print job is processed the printer pauses between every copy, which is tripling the printing time. If I print a simpler document with only one or two layers it processes all the copies at once, as it should. I am printing on an Okidata 6150 color laser printer.
I never had this problem on my old computer. I'm wondering if this is one of the "unsupported" bugs of running CS3 on Snow Leopard. I want to make sure that this is a problem unique to running CS3 with Snow Leopard before I go ahead and upgrade to CS4 or CS5.
computer: Mac Mini core 2 duo 2.4 ghz processors, 4 gb RAM, printer: Okidata 6150 DN color laser printer.

Hi again Peter
It is version 5.0.4. I updated it when I newly installed it a week ago in my new computer, and then again updated it just yesterday.
I might mention that before I got my new computer, I was running Mac OS 4.11, and was using InDesign 3.0. I had bought InDesign CS3 about a year ago, but hadn't gotten around to using it since version 3.0 had been working fine, and I was used to it. Then, when I got my new computer, I decided it was time to use the newer version. However, while using InDesign 3.0 with the old Mac OS 4.11, a printing problem popped up there, too, a few months ago... and it also involved printing problems with Adobe Reader. I contacted Adobe, and they sent me a patch which fixed it. I will contact Adobe again if need be, although I thought I'd start here first to see if it was a common enough problem that someone might be able to provide a free and routine answer.
Richard
Date: Tue, 15 Jun 2010 20:10:13 -0600
From: [email protected]
To: [email protected]
Subject: Printing problems with InDesign CS3 with Mac OS 10.6.3
I neglected to ask what version of indesign CS3 you are using. I also
notice that Mac OSX 10.6.4 has just been released. It actually
addresses some CS3-specific issues, though they seem to be related to
launching the apps, not printing. It may be worth trying to update,
nonetheless.
Peter Truskier
Premedia Systems, Inc.
510-655-4454
>

Problem with 10.2.0.5 patch on Windows 2008 Server R2 64bit

Hello
I have HP server with Windows 2008 Server R2 64bit. I installed
latest 64-bit version of Oracle Database 10.2.0.4 and everything works fine and later installed the patch 10.2.0.5 (64 bits) as the Oracle maintains that with the R2 version of the system it is necessary to correct work.
Now, after uploading the patch database starts and closes
after about 15 minutes and my alert log file is changed to the binary version which do not see anything (means that after patch installation (10.2.0.5) the alert log file isn't normal text file and it looks like that:
Źýţ cśy iµ•eű .Ź ťy ťy Ř®y hčN)
You can read only the beginning and it's very large - 13 Mb after unpacking from ZIP.
Can anyone met with this configuration and knows how to solve
problem?
This is the link to my strange alert log file:
http://www.2shared.com/file/22MFap1V/alert_orcl.html
I attached my spfile.ora file too:
http://www.2shared.com/file/gUmID0fh/SPFILEORCL.html

Your alertlog is corrupted, it could be something about a virus or even a problem with disk drives. Have you scanned your server with anti-virus software? Have you scanned the disks?
Last questison: Have you upgraded your database after you installed the patch?
SQL> SHUTDOWN IMMEDIATE
SQL> STARTUP UPGRADE
SQL> SPOOL patch.log
SQL> @ORACLE_BASE\ORACLE_HOME\rdbms\admin\catupgrd.sql
SQL> SPOOL OFFIf not, please read the "readme" file which comes with patchset (do not just run the above commands without reading Oracle documention).
Best Regards,
Gokhan
If this question is answered, please mark appropriate posts as correct/helpful and the thread as closed. Thanks

I am facing problem with adobe illustrator cc in windows 8,it closes automatically after few secons,please help

I am facing problem with adobe illustrator cc in windows 8,it closes automatically after few secons,please help
[ link removed by moderator ]

Sign in, activation, or connection errors | CS5.5 and later
Mylenium

AHCI Problems with DW CS3

I have problems with DW CS3 when I use the AHCI mode in BIOS.
Then DW can not start. But I need a solution. Since I do not want
to buy DW CS4 although this runs without any problems.

Yes...the pages from the book display perfectly in dw8, but
not in DWcs3.
I found that by commenting out the "clear:left;" under "#nav"
the page displays properly in DWcs3, too. That leaves open the
question of "why".
Thanks.

Printing problems with InDesign CS3 with Mac OS 10.6.3

I am not new to InDesign... I have CS3... but I am brand new to Mac Snow Leopard (OS 10.6.3). Although I can open CS3 and use the application, I cannot print with it. None of my other applications has printing issues... just CS3. Any suggestions?
Richard

Hi again Peter
It is version 5.0.4. I updated it when I newly installed it a week ago in my new computer, and then again updated it just yesterday.
I might mention that before I got my new computer, I was running Mac OS 4.11, and was using InDesign 3.0. I had bought InDesign CS3 about a year ago, but hadn't gotten around to using it since version 3.0 had been working fine, and I was used to it. Then, when I got my new computer, I decided it was time to use the newer version. However, while using InDesign 3.0 with the old Mac OS 4.11, a printing problem popped up there, too, a few months ago... and it also involved printing problems with Adobe Reader. I contacted Adobe, and they sent me a patch which fixed it. I will contact Adobe again if need be, although I thought I'd start here first to see if it was a common enough problem that someone might be able to provide a free and routine answer.
Richard
Date: Tue, 15 Jun 2010 20:10:13 -0600
From: [email protected]
To: [email protected]
Subject: Printing problems with InDesign CS3 with Mac OS 10.6.3
I neglected to ask what version of indesign CS3 you are using. I also
notice that Mac OSX 10.6.4 has just been released. It actually
addresses some CS3-specific issues, though they seem to be related to
launching the apps, not printing. It may be worth trying to update,
nonetheless.
Peter Truskier
Premedia Systems, Inc.
510-655-4454
>

I am having problem with Photoshop CS3 hanging

I am having a lot of problems with Photoshop CS3 hanging and crashing. Particularly when I open hi-res photos and click on tools, like the type tool. Is anyone else experiencing this problem? Any suggestions on how to fix the problem?
Thanks.

Buy more RAM, plain and simple. Sounds the program is severely suffocating. for on-screen display fonts need also be rasterized, which also costs RAM, even if they otherwise remain native vectors. How much memory do you have? as a short term solution, you may wish to increase the program's RAM usage in the prefs, but it may not resolve the issues entirely.
Mylenium

Hi, I have a problem with fonts because in the window I can't see the font, they are transparent. how can I fix this?

Hi, I have a problem with fonts because in the window I can't see the font, they are transparent. how can I fix this?

giadad,
It sounds as this issue:
Open System Preferences and go to Accessibility. Next, select Display from the source list along the left, then check the box labelled Reduce transparency.
It was first presented in this post #15 by TheUlser:
https://forums.adobe.com/message/6854594#6854594
It has been described on this Adobe page:
http://capitalmacservice.com/font-preview-working-illustrator-cs-5-yosemite-fix/

Radeon Drivers problems with BootCamp Windows 2008 Server R2

Hello !! I have some troubles with BootCamp and Windows 2008 Server R2... I can't find any graphic drivers for my AMD Radeon HD 6490 !! Heeeelp please
(I Have a Macbook Pro i7)

Shoooryuken, did you ever get this problem resolved? I have thhe same issue...
I have the 2011 MacBook Pro 15" 2.0ghz Quad Core i7 with integrated Intel HD Graphics 3000 and AMD Radeon 6490M.
I just installed Windows Server 2008 R2 (Which is based on Windows 7) using Boot Camp. After I installed it, the I only have 3 resolution options, all of which are stretched. I checked the device manager and found that the Apple Instal DVD did not work and only a "Standard VGA Graphics Adapter" was installed. It also reports a whopping 16MB of graphics memory
I downloaded the "detect and install" driver utility from AMD (http://support.amd.com/us/gpudownload/Pages/index.aspx) and it detected my correct OS and downloaded something (driver maybe?). When I clicked install, I recieved this message: "AMD Catalyst Mobility cannot be downloaded due to incompatible hardware/software on your computer. Your computer does not contain a proper graphics adapter."
I don't really know why Windows does not detect the graphics card. Right now I am trying to install the Intel graphics drivers for the Intel HD 3000 integrated graphics... I will report back if I get the integrated graphics running...

Windows 2008 Server Enterprise R2 x64 and Perc 4/dc SCSI driver issue

Hello all, this is the first time posting so please forgive me if this has been posted here before. I did try to search this issue but zero returns.
OK, I have a Dell PowerEdge 2900. I have just put a fresh install of MS Windows 2008 ENT. Server x64. I cannot seem to find a driver for the PERC 4/dc SCSI controller I have installed. I have been told the 2003 x64 driver would work so I attempted to install that driver but was unsuccessful. Then I was told by Dell that the driver should be native to the OS. Is the driver native to 2008 Server (or, supposed to be)? Does anyone have an answer as to where I might retrieve am driver of the controller if not? Anyway, thanks in advance

Hello,
I don't have a PowerEdge 2900, but I do have a PowerEdge 2850. I'm also just a regular bloke like yourself that just happened upon your post and after I figured this driver debacle out I registered to hopefully help.
The good thing is my PERC card is the same in the PE2850 as it is in your PE2900, as I'm utilizing a PERC 4/DC. I've also managed to run into the same issue you ran into(?) trying to load Windows 2008 Server Enterprise R2 (support for 32bit processors have been removed in R2... so no more x86 versions... my poor PE2650s never stood a chance with this OS).
I can tell you officially from my experience/research Windows Server Enterprise R2 does not have support built into it for the PERC 4/DC card.
However, I was able to download the Windows 2003 x64 driver from support.dell.com and make it work after much trial and error with newer releases of the PERC 4/DC driver that were not accepted by 2k8R2.
Here's the link: http://support.dell.com/support/downloads/download.aspx?c=us&cs=RC956904&l=en&s=hied&releaseid=R100373&SystemID=PWE_PNT_P3C_2850&servicetag=FBCLP61&os=WX64&osl=en&deviceid=6396&devlib=0&typecnt=0&vercnt=1&catid=-1&impid=-1&formatcnt=3&libid=35&fileid=129549
File name (incase Dell moves it on you guys) is "perc-w2k3-6.46.3.64-A01.exe", date released 6/9/2005, build version 6.46.3.64, and the Dell revision number is A01.
Even though it states the driver is for the LSI Logic PERC 4e/Si it's sort of a mega pack including many other drivers such as the PERC 4/DC. This was much relief because I was thinking I would need to stick with Windows 2008 until I found this driver for Windows 2008 R2. :)
What I did was:
1) Downloaded the driver and extracted it to a USB drive.
2) Booted-up via the Win2k8R2 CD and when it got to the screen where it asked to install to a partition and didn't show me a partition to install Win2k8R2 to I selected the option to load a driver.
3) From the load driver option I just browsed to the directory where I extracted the files and selected that directory. If the "hide devices that are not compatible" option is selected (normally on by default) it will show you the proper driver.
4) Select the PERC 4/DC driver and then setup your partitions the way you would like them!
From there you should be able to boot into the OS... and really have some fun.
Now you have the power... I guess the choice is yours to R2 or not to R2... that is the real question. :)
Enjoy!
Dave
Thanks and this worked for a Power edge 1800, PERC 4/DC as well. Kukan

Error: SAP installation of ERP Sr3 with ORACLE 10g on Windows 2008 server

Dear all,
while installaing SAP ERP SR3 with ORACLE 10g on windows 2008 server...
we are getting error as not support.
please confirm wether this version of OS is uspported or not.
thanking you in all,
by
Animesh

actualy we tried to change Oraparam.ini file in the installation folder...
edited ... windows= 5.0, 5.1, 6.0
we had entered 6.0
Yes - that is necessary.
and started ... but after starting we are getting ERROR like unKNOWN and installation popup (OUI popup) exiting with .. error popup.
Yes - because Oracle delivers its own Java version - which is too old to run on Windows 2008.
if you suggest us to use 2003 64 bit for temporaray .... purpose.
and is there any specified procedure to UPgrade OS.
like... DB should be updated before OS upgradation.
You can run 10.2.0.4 on Windows 2003 x64 nicely and upgrade to Windows 2008. Since there is no "upgrade" (it is the highest version supported) there´s no need to do anything.
The question you have to ask is:
Why do you need Windows 2008? Is there any technical implication?
Markus

MMC problem with IDS CS3 on x64 Windows 2008 Server

Similar Messages

Maybe you are looking for