MMPV Conversion

Hi,
When i try to run MB1C i get an error "Posting only possible in periods 2010/12 and 2010/11 in company code xxxx"
when i check MMRV the current period is 12/2010, but i am trying to close the period 12/2010 in MMPV but it says 'No Conversion' . Can anyone please assist what i am missing here
Thanks

Hi,
Error: in MB1C
Posting only possible in periods 2010/12 and 2010/11 in company code XXXX
Message no. M7053
Diagnosis
The posting date entered is not within one of the permitted posting periods (current period/previous period).
This can be due to one of two reasons:
The correct current period has not been set in the system.
For the system, the first of the entered periods is the current period. At the beginning of a new period, your systems administrator must change the current period in the material master record, using the function "Shift periods". This has not yet been done.
You have entered a wrong date in the field "Posting date".
Procedure
Check the posting date and correct it if necessary. If your input is correct, inform your systems administrator that the "period shifting" (period-end closing) process has not yet been completed. Copied from M8022
MMPV LogL O G
Mode: Check and close period
Client:110
Period entered (month/year):012011
CoCd 1000: table T009B incomplete; no c
Period closing complete; log issued.
Thanks

Similar Messages

Period conversion in mm

Hi
iam able to post me21n i got the regarding period conversion i made a mistake while entering period in mmpv instead of 5th period i entered 8 according to indian calender and i saved it,sir's is there any solution for this again i can give 5th period.
Thanks

I understand that the earlier setting was a mistake, but what is stopping you from specifying the correct period now in OMSY?

Program mmpv wrong period filled in.

I got a problem with the periodes. In program mmpv I did do something wrong. The date I put in was 30/07/2008 instaed of 30/06/2008. So at the moment the periode that is open is periode 09 not periode 08.
And it has to be 08.
Can you change the mmpv into periode 08.
Mmpv ( now the result is : ) our current period has to be 08/2008 not 09/2008
Close Period for Material Master Records
L O G
Mode: Check and close period
Client: 623
Period entered (month/year): 08 2008
Incorrect period in control rec. of CoCd 0754; no conversion The current period (month/year) of the control record is 09 2008
Period closing complete; log issued.
Please can you change the period in the period 08/2008
Edited by: Ian Wong on Jun 30, 2008 6:26 PM

Change the period from 09 to 08 using MMPI transaction.
Follow the instruction in SAP Note 487381.
Maintain parameter (SU01/ SU2/SU3 t-code) MMPI_READ_NOTE with current date as paramter value in YYYYMMDD format before using MMPI transaction.
All users using MM -period related transaction must either stop using the transaction or log out.

Incorrect period in control rec. of CoCd HITA; no conversion

Hi All
While changing the posting period in GR creation, I am getting the below error:
Incorrect period in control rec. of CoCd HITA; no conversion
The current period (month/year) of the control record is122006
Seeking for expert's help.
Regards
Vidya

hi ,
       one thing u have to do, go to t-code mmpv or obyc
                          company code -
                             period- 08.09 (like month)
                         fiscal yaer -2009
                                                         execute,

Cannot close period 3/1998 with MMPV

Hi all,
   I try to close period 3/1998 with mmpv . But i get an error "The specificed year 1998 is not the current carendar year".
   When i try with 3/2007 and execute. i got an error
Close Period for Material Master Records
L O G
Mode: Check and close period
Client: 000
Period entered (month/year): 03 2007
Incorrect period in control rec. of CoCd 0001; no conversion The current period (month/year) of the control record is 03
1998
Period closing complete; log issued.
E N D
What 'd i do?
BR,
Prachya

Hi All,
   I Had faced this Problem go to T.Code: OMSY There check CoCd : 0001 in which year & Month Till Closing period is there. As per your query it must be in 1998 03.
So Now Go to MMPV CoCd: 0001 (your Cocd)
Period : 04
Fiscal Year : 1998
It Gives a Warning Message as :
The specified year 1998 is not the current calendar year (Press Enter)
Period is closed for 04 1998 in this way you do for all months till you Get Calender year 2007.
I thing This Solve your Problem.
Regards,
Pherasath

MMPV : meaning of an error

Hi, i'm working with MMPV the details of data input are
from company code XX
to company code XX
period 07
fiscal year 2010
or
date
Check and close period enabled
all other options disabled.
and i'm getting this error.
Mode: Check and close period
client 100
Period entered (month/year) 072010
Interruption
found no society with their permission. without conversion *
please help me i need close previous period. thanks.
Edited by: Juan Valenzuela on Jul 1, 2010 7:36 PM

Hi Juan,
To close previous period there are 2 options
1) Key in fields
From Co code : XYZ
To Co code : XYZ
Enter period 07 (here enter 04 if your fiscal year starts from April month )
Fiscal Year 2010
Execute
2) Key in fields
From Co code : XYZ
To Co code : XYZ
Date : 01.07.2010 (here keep Period and Fiscal year fields as blank)
Execute
Hope its clear to you now ! I think you should be able to close it successfully
Regards,
Uzair Hussain

MMPV Table

Hi,
When i try to run MB1C i get an error "Posting only possible in periods 2010/12 and 2010/11 in company code xxxx"
when i check MMRV the current period is 12/2010, but i am trying to close the period 12/2010 in MMPV but it says 'No Conversion' . Can anyone please assist what i am missing here
Thanks

If I done MMPV

Conversion of Characteristic Values to SIDs is taking long time

Hi Experts,
Cube load is taking more than 7 hrs to complete for 6 million records. Max time is at Conversion of Characteristic Values to SIDs. Cube consists of 500 fields. Load is from DSO to Cube. DSO has 10 fileds with no SID flag check for activation. Remaining fields in the CUBE are pouplated looking in to other DSO's. Start and End routines are executing very fast. How to fasten Conversion of Characteristic Values to SIDs step. I need to load 15 million records daily as part of delta. any suggestions.
Thanks
Sunil

Hi Sunil,
Go through the below link, it will be useful
http://aq33.com/business-warehouse/Articles-05269.html
Regards,
Marasa.

11i to r12 Conversion - help needed

Hi
My client is doing re-implementation of r12 and migrating from 11i to r12. I need help particularly on conversions side. The client is a SaaS company. they are considering to bring open and history transactions and applied/unapplied receipts to r12 AR.
- how to migrate revenue scheduled open/closed invoices from 11i to r12 since rev schedules for a SaaS company is expected to be long terms. and how to make sure that rev schedules are correct upon migration to r12??
- for partially paid invoices how to make sure that the same partially paid amount reflects in r12 upon conversion? can a negative line amount equalling to paid amount be a possible solution??
- upon migration do the closed invoices have to be converted as open and receipts re-applied after migration in r12 or they can be brought in as-is with status closed?
- if customer paid for an invoice using a credit card in 11i and upon migration it came to notice that the credit card is no longer used by the customer so how to re-apply the same receipt in r12 which was applied in 11i using that credit card. do we have to enable it in r12 just for closing the invoice? what could be possibilities?
please anyone if can answer would be very helpful
Thanks
-MS

It depends on the dpi. Usually 72dpi = 72 pixels per inch.
1000/72 = 13,88888 inch
1 inch = 25,4 mm
13,88888 * 25,4 = 352,7777 mm
You do the arithmatic with a calculator.
To do the same with pictures, you can do it in any image editor. Even Preview.app :
!http://www.wyodor.net/_Discussions/PreviewResize.png!

IMessage beta loose all saved conversations when I open and close a window.

iMessage beta looses all saved conversations when I open and close a window.
Just reporting this bug... Could not find anyother place to do it.
Jonathan

I thought it was doing that also. But I found that if I start a new chat with someone I was messaging before, then the old messages re-appear in the messages window.

Is there a way to selectively edit a conversation in iMessages instead of clearing the entire conversation? Like you can do on the iPhone for instance.

Is there a way to selectively edit a conversation in iMessages instead of clearing the entire conversation? Like you can do on the iPhone for instance.

Did you find an answer to your question?
Would it also apply to Mountain Lion's Messages?
Thanks

I need to delete myself from a Group Conversation.

My idiot friends added me to a group conversation and i cannot leave it. Each time i ask them to start a new conversation and not include me they refuse. My phone has been ringing non stop for 3 days now and i need to find a way to get out of this conversation so that i can go to class, do my homework and sleep at night!!! I can turn my phone onto Airplane mode but when it is in this mode I cant receive the important phone calls and text messages that i need to answer.
Somebody please help me.
If there is no way to leave this conversation somebody please tell me where i can find a virus that will shut down their phones.
Thanks
WN

See this Video on Freeing Up Disc Space
http://macmost.com/what-to-do-when-your-hard-drive-is-full.html

In Thunderbird while trying to move conversation results to an archive folder; if some of the results are already in the folder it will not move any.

Hi. I often use the conversation search option when archiving my emails from inbox. I find this a very useful method of finding trails where I and multiple people have responded to each other. However If I have already moved one or more of these emails into the archive folder and select all to move, Thunderbird will not move any. I then need to individually select those that need to be moved.
Although not a major issue I use this regularly and often come across the problem. a recent fix which allows location tab to remain on in search helps but does not resolve this issue. A slightly annoying problem and I was wondering if any one else has this issue. Also is anyone looking into a solution?

FCPx answer: At least the answer that worked for me...
I had the same problem, as I believe many others had.
In my case the problem was with one of OSX Mavericks' new features: APP NAP.
It looks like this is ON by DEFAULT for ALL Applications and that FCPx, or Compressor for that matter, will not work if this is enabled on them.
I just disabled App Napp on FCPx and now it works, again, like a charm.
This is how you disable App Nap: http://reviews.cnet.com/8301-13727_7-57612009-263/how-to-disable-app-nap-in-os-x -mavericks/
I hope this helps,
Mariano

Import conversion data table from SAP R/3 into value mapping table in XI

Hi:
    Somebody knows how to import a table with conversion data that are in SAP R/3 and to take it to a value mapping table in XI?
    The purpose is to use a mapping table that can change in the future. Must I use a ABAP programming that retrieve data and build the value mapping table?
    If so, how I specify in the ABAP programming the group id, the scheme, the agency and the corresponding value?
    Please, help me.
    Regards!!!

Hi David,
please refer to this section in the help: http://help.sap.com/saphelp_nw04/helpdata/en/2a/9d2891cc976549a9ad9f81e9b8db25/content.htm
There is an interface for mass replication of mapping data. The steps you need to carry out to use this are:
+Activities
To implement a value-mapping replication scenario, proceed as follows:
       1.      Register the Java (inbound) proxies.
To do so, call the following URLs in the following order in your Internet browser:
¡        http://:/ProxyServer/register?ns=http://sap.com/xi/XI/System&interface=ValueMappingReplication&bean=localejbs/sap.com/com.sap.xi.services/ValueMappingApplication&method=valueMappingReplication (for the asynchronous replication scenario)
¡ http://:/ProxyServer/register?ns=http://sap.com/xi/XI/System&interface=ValueMappingReplicationSynchronous&bean=localejbs/sap.com/com.sap.xi.services/ValueMappingApplicationSynchronous&method=valueMappingReplicationSynchronous (for the synchronous replication scenario)
You only need to perform this step once (for each installation).
       2.      Application programming
The ABAP program must perform the following tasks:
¡        Read the value mapping data from the external table
¡        Call the outbound proxy used to transfer the data to a message, which is then sent to the Integration Server
       3.      Configuration of the replication scenario in the Integration Directory
This involves creating all the configuration objects you need to execute the scenario successfully. One special aspect of the value-mapping replication scenario is that the receiver is predefined (it must be on the Integration Server). The sender, however, is not predefined in the replication scenario and can be defined to meet your individual requirements.
For example, you can use the shipped ABAP proxies.
In the case of the receiver communication channel, choose the adapter type XI. Ensure that you configure a channel for the Java proxy receiver in this case.
Enter the path prefix /MessagingSystem/receive/JPR/XI for this purpose.
+
Regards
Christine

In Pages 5, Maverick, How do I stop automatic conversation of URLs to hyperlinks and seeing them underlined

There used to be a preference setting in Pages. Now it seems gone in Pages 5. So how do I stop automatic conversation of URLs to hyperlinks and seeing them underlined in text. Sometimes I want it, but not always.

The preference setting to turn off links is gone. When you enter content that triggers link detection, a link character style gets applied. Right-click on the link, choose Edit Link from the menu, and then Remove.
To prevent Pages from automatically detecting links, visit Edit > Substitutions > and deselect Smart Links.

MMPV Conversion

Similar Messages

Maybe you are looking for