MMPV for last month of year

Hi Guru's
I am going to open MM period through MMPV for jaunary 2010.
i am puting period = 01 and Fiscal year 2010
and getting error message that " 2010 is not your current cleander year.
so what is my fiscal year in this case??
seeking your help.
Regards,

Hi
Check it out in the FI whether they opened the fiscal year in FI or not. Check with transaction OB52, whether FI has opened their periods or not.
If not, then let them opened it first then you have to open MM period.
Regards
Imran

Similar Messages

Sales report for current month and year a go month

i could you please guide me builting report for current monthwise for current month and year a ago month
report parameter month_year='06-2010'
tables = sales and below are the table fields
customer_id
invoice_dt
invoice_am
thanks
nhm

Okay, Still you did not mention how you will pass value in report while generating.
Anyway the query with UNION ALL will work. For Example.
I am assuming that the parameter for date/month you will pass in range like 01-JUN-2010 to 30-JUN-2010
SELECT customer_id, SUM(curr_value) curr_value, SUM(past_value) past_value
FROM
SELECT customer_id, NVL(SUM(invoice_amount),0) curr_value, 0 past_value
FROM sales
WHERE invoice_dt BETWEEN :P_FROM_DATE AND :P_TO_DATE -- here P_FROM_DATE and P_TO_DATE will be the date range for current year as i showed above.
AND -- Any Condition goes here...
GROUP BY customer_id
UNION ALL
SELECT customer_id, 0, NVL(SUM(invoice_amount),0)
FROM sales
WHERE invoice_dt BETWEEN ADD_MONTHS(:P_FROM_DATE,-12) AND ADD_MONTHS(:P_TO_DATE,-12) -- This add_months function for the previous year same month.
AND -- Any condition goes here...
GROUP BY customer_id
GROUP BY customer_idNow using the above query you can design the tabular report as you showed the format.
-Ammad
Edited by: Ammad Ahmed on Jul 3, 2010 7:55 PM
added GROUP BY

Why I can only download 20 photos for last month from the photostream while I have more than 3GB photos kept in iCloud? Many thanks.

Why I can only download 20 photos for last month from the photostream while I have more than 3GB photos kept in iCloud? My iPhone was stolen and the photos in it are very precious to me. Many thanks.

On a new device you can only download what is currently stored in "My Photo Stream" in iCloud. iCloud keeps up to the last 1000 photos, but only the photos, that have been added during the last month. Older photos may be removed, when the time is up. On other devices you may be seeing older photos as well in "My Photo Stream", that will depend on the available storage on those devices, and when the Photo Stream has been enabled on those devices, see: My Photo Stream FAQ - Apple Support
If you are seeing other photos in the Photo Stream on other devices, that you want to save, mail them to you from the other devices.
Have you tried to restore your iPhone from the last iCloud backup of the old phone? The backup will contain the photos in the Camera Roll, but not the photos in Photo Stream. iOS: Back up and restore your iOS device with iCloud or iTunes

STAD Report for last month

Hi,
   Iam getting stad report for last one week,iam not getting the stad report for last month.i want to get stad report for particular day in last month.how to rectify the same.
Thanku

Hi,
rsau/local/file /usr/sap/LID/DVEBMGS00/log/
you will have to set DIR_AUDIT parameter instead of it.
Set the following parameter with reference value:
Parameter                                  Description                                   Reference Value
DIR_AUDIT                  Directory for security audit files          S:\ECP-AUDIT\ECP\DVEBMGS00\ECP_security_audit_log
FN_AUDIT                  Name of security audit file                   ECP_AUDIT_++++++++.AUD
rsau/enable                  Enable the Security Audit Log                       1
rsau/max_diskspace/local       Maximum space for security audit file                 2147483647
rsau/max_diskspace/per_day Maximum size of all security audit files per day            (If you wish, otherwise let it be default '0')
rsau/max_diskspace/per_file      Maximum size of one single security audit file             (If you wish, otherwise let it be default '0')
rsau/selection_slots              Number of filters to allow for the Security Audit Log            (If you wish, otherwise let it be default '2')
rsau/user_selection              Defines the user selection method used inside kernel functions         (If you wish, otherwise let it be default '0')
activated profile in sm19,still iam not getting audit log for last week in sm20.
After Proper setting of Security Audit log parameters, the Application Server needs to be restarted to make the changes effective. You will only get the Audit Data since the activation of valid Security Audit parameter.
Regards,
Bhavik G. Shroff

How do I know what transactions executed by specific user for last month

All
We have a request to find out what transactions are executed by secific user
for last couple of months.
Is there any report in SAP would tell me ?
Please advise.
From
PT.

Hello PT,
If you use the search for the term "How do I know what transactions executed by specific user for last month" then I guarantee you some good hits in the result, and further more detailed search terms to use...
Cheers,
Julius
(this time in response to the correct thread...)

Getting the data for last month of every year

Hi,
How to declare the date if we want to pull the data from the December of every year.
For example if the query is run in march 2015 and they want the historical data it should pull only the data from dec 2014.
In the same way if they ran the query in future jun 2016 and if they want to historical data it should pull only data from dec 2015.
It should not coded manually. Please help me with date format that need to used.
BALUSUSRIHARSHA

Please follow basic Netiquette and post the DDL we need to answer this. Follow industry and ANSI/ISO standards in your data. You should follow ISO-11179 rules for naming data elements. You should follow ISO-8601 rules for displaying temporal data. We need
to know the data types, keys and constraints on the table. Avoid dialect in favor of ANSI/ISO Standard SQL. And you need to read and download the PDF for:
https://www.simple-talk.com/books/sql-books/119-sql-code-smells/
A table has to have a key to be table. Here is my guess at a repair job:
CREATE TABLE Test_Data
(pu_id INTEGER NOT NULL
REFERENCES PU(pu_id),
pu_date DATE DEFAULT CURRENT_TIMESTAMP NOT NULL,
PRIMARY KEY (pu_id, pu_date),
x_count INTEGER,
y_count INTEGER);
Identifiers are not numeric in a good schema. What math do you do with them? They are also the key in the table that models the entity they identify. Where is the PU table (and what is a PU anyway)?
INSERT INTO Test_Data
VALUES
(28, '2014-01-01', 10, 20), -- crap! No key in this mess!!
(28, '2015-01-01', 30, 20), --
(28, '2014-12-12', 10, 20),
(28, '2015-02-02', 10, 20);
A PIVOT is not a query and not even part of SQL. It is how Microsoft programmers who do not know RDBMS or have a report writer violate the tiered architecture of SQL. We also do not use XML mixed in SQL. It is a bitch to maintain, has poor performance and again
violates the tiered architecture principle.
A query is not sorted because it is a table. A file in COBOL can be sorted and that seems to be what you really want to write.
Old COBOL love the Sybase CONVERT() string function to avoid SQL temporal data.
We never use SELECT * in production code; Google it. Not only are you generating code, you are generation bad code.
Since SQL is a database language, we prefer to do look ups and not calculations. They can be optimized while temporal math messes up optimization. A useful idiom is a report period calendar that everyone uses so there is no way to get disagreements in the DML.
The report period table gives a name to a range of dates that is common to the entire enterprise.
CREATE TABLE Month_Periods
(month_name CHAR(10) NOT NULL PRIMARY KEY
CHECK (month_name LIKE <pattern>),
month_start_date DATE NOT NULL,
month_end_date DATE NOT NULL,
CONSTRAINT date_ordering
CHECK (month_start_date <= month_end_date),
etc);
These report periods can overlap or have gaps. I like the MySQL convention of using double zeroes for months and years, That is 'yyyy-mm-00' for a month within a year and 'yyyy-00-00' for the whole year. The advantages are that it will sort with the ISO-8601
data format required by Standard SQL and it is language independent. The pattern for validation is '[12][0-9][0-9][0-9]-00-00' and '[12][0-9][0-9][0-9]-[01][0-9]-00'
This will port and waste time calling string function row by row.
--CELKO-- Books in Celko Series for Morgan-Kaufmann Publishing: Analytics and OLAP in SQL / Data and Databases: Concepts in Practice Data / Measurements and Standards in SQL SQL for Smarties / SQL Programming Style / SQL Puzzles and Answers / Thinking
in Sets / Trees and Hierarchies in SQL

Table for Material Quantity and Value for particular month and year

Hi All
My requirement is that for a particular month and year I want to know the stock quantity and stock value for a particular material for a given plant.From which SAP table can I get this data as I want to fetch data for my Y report?
Regards
Satish Kumar

Hi,
You can use MB5B table as suggested earlier.also you can use:
MBEW-VMKUM --> stock for previous month period
MBEW-VJKUM --> stock for previous year period
PLease view these links which migh tbe helpful to you:
http://help.sap.com/saphelp_47x200/helpdata/en/39/55fee3bc6111d4b3960050dadf0791/content.htm
TableStock
Thanks
Nisha

Function module for getting month and year of the previous month (say -6)

Hi,
Is there a function module that will get you the month and year of say, a month before, and as far as 11 months ago.
For example, say today is 6/2007. I want 7 months ago.
How do i get this value?
What function module or method is available?
Points will be rewarded and responses will be appreciated.
Thank You,
John

Hi
lv_period gives the month and year which is two months earlier now as we have specified lv_months as -2.
    DATA: LV_PERIOD LIKE S001-SPMON,
          LV_MONTHS(2) TYPE C VALUE '2-',
          LV_DATUM LIKE SY-DATUM,
          LV_NEWDT LIKE SY-DATUM,
        P_SPMON LIKE S001-SPMON VALUE '200601'.
    CONCATENATE P_SPMON '01' INTO LV_DATUM.
    LV_PERIOD = P_SPMON+0(6).
    CALL FUNCTION 'MONTH_PLUS_DETERMINE'
         EXPORTING
              MONTHS = LV_MONTHS
              OLDDATE = LV_DATUM
        IMPORTING
             NEWDATE = LV_NEWDT
         EXCEPTIONS
              OTHERS = 1.
     IF SY-SUBRC = 0.
       LV_PERIOD = LV_NEWDT+0(6).
     ENDIF.
WRITE :/ LV_PERIOD.
OR
Use the following FM for getting the year and the month based on date
CACS_DATE_GET_YEAR_MONTH
or
Call Function 'CCM_GO_BACK_MONTHS '.
Funny module: 03/31/2002 - 1 month = 02/31/2002
OR
RE_ADD_MONTH_TO_DATE ( Add / substract month to/from date )
Need ur reward points.
Best regards,
Ravi

Depreciation is not executed for last month and the period is closed. Giving Error in this Dep. Cycle.

Hi All,
We had a month End scenario where the depreciation for a company code is not executed for the last month and closed the period without checking it.
While running the Depreciation posting for this month we encounted a error that last motn period is closed. Can we do the depreciation without opening the period closed. Kindly let us know the options available.
Regards,
Lakshmi Narayana

Lakshmi,
There is no way you can post depreciation without opening the prior periods. Please discuss with your business and secure all necessarry approval, I believe the business has a process on this kind of situations. As long as it is fully documented, auditors will not find it wrong.
This is the best time to improve your process, think of possible ways so that business will not forget to post depreciation (e.g send automatic email during 3 days before, 2 days before., 1 day before and during the day of depreciation run).
Hope this helps.
Thanks!
Jhero

141 GB download for last month!

How accurate is the BT broadband usage in My BT? It says I have downloaded 141GB for the last month. Never downloaded anything near this astronomical amount when with Sky.
I'm on Infinity 2 so not too bothered, just very puzzled.

BarnyG wrote:
Further info. Just checked the router -
Connection time:- 26 days 02.22
Data Transmitted/Received 2.2gb/2.0gb
This bears no relation to My BT unless it resets each month. Does this happen?
Is there another stats page? Some routers are known to report erroneous values in certain places - e.g. my TG582n would max out at about 4GB up and down on the detailed stats page, but would show correct values on the Internet stats page.
Ian.
Thanks
Ian
http://www.siteguru.co.uk/be/ADSL2PlusForDummies.pdf - Having ADSL issues? Then read this PDF
Please don't click the star beside my name - too many stars makes you look like a swot!

Being billed for 13 months a year?

Hi, i've got a problem I can't fathom.
Recieved a bill (date 30thMarch) that was around twice the amount of my usual monthly bill and that stated it covered charges 1st march - 27th march and 28th march - 27th april.
At the time i phoned up to figure out why i had been charged twice as much. I was told that this was a two month bill. which sort of made sense at the time. But i then recieved a bill in april, and i had previously recieved a bill in february.
So where exactly is this extra month?
The only thing i can think of is that the bill periods for each item, Broadband talk, phone line etc. are all periods of 4 weeks....Not a month.
This means there are going to be 13 "monthly" bills in a year. Is this right? Surely the prices can't be advertised as monthly if they have to be paid 13 times a year. Any help about this would be great.

Hi EvansG,
Welcome to the forum and I am sorry for the confusion over your most recent bill.
Please have a read of the information on this link How we worked out your bill. I think that your bills have been changed to the new style billing which has included and extra one off charge to catch up to the billing period. The link above will explain why this has happened.
I hope this helps
Cheers
Sean
BTCare Community Manager
If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
We are sorry that we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)

How to use the API for DATE, MONTH AND YEAR

I would like to use the java api in .util.calender in the java api to get the date.
How to implement the API for the "DATE","MONTH","YEAR" which are available provide by java?
can someone give me in one complete code?

From the Java Developers Almanac 1.4:
    Calendar cal = new GregorianCalendar();
    // Get the components of the date
    int era = cal.get(Calendar.ERA);               // 0=BC, 1=AD
    int year = cal.get(Calendar.YEAR);             // 2002
    int month = cal.get(Calendar.MONTH);           // 0=Jan, 1=Feb, ...
    int day = cal.get(Calendar.DAY_OF_MONTH);      // 1...
    int dayOfWeek = cal.get(Calendar.DAY_OF_WEEK); // 1=Sunday, 2=Monday, ...

Week function gives wrong result for last week in year

Week(CreateDate(2011,12,25)) returns 51 - correct
Week(CreateDate(2011,12,26)) returns 53 - wrong
It looks like all last weeks of the year are 53 whereas the next year with 53 weeks should be 2015.
See http://tuxgraphics.org/toolbox/calendar.html for example.
I am running CF9 on Windows 7 with Java V6 update 29.
This is causing me a problem. Any ideas for a workaround?
Doug

Here is my general solution for my cfc which seems to work for all dates up to 2100 at least.
Hope it can help if you need a Week function to replace the CF one.
<cffunction name="getISOWeekNum" access="public" returntype="Numeric" hint="Gets ISO week number in which date occurs.">
    <cfargument name="date" type="date" required="true" hint="Date for which you wish to know the week number">
    <cfset var weeknum = 0>
    <cfset var isLeap = isLeapYear(Year(date))>
    <cfset var dayInWeek = dayOfWeek(date)>
    <cfset var isoDayOfWeek = iIf(dayInWeek GT 1, dayInWeek - 1, 7)>
    <cfset var nearestThur = dateAdd("d", 4 - isoDayOfWeek, date)>
    <cfset var fourthDayOfYear = createDate(year(nearestThur), 1, 4)>
    <cfset var fourthDayInWeek = dayOfWeek(fourthDayOfYear)>
    <cfset var fourthIsoDayOfWeek = iif(fourthDayInWeek GT 1, fourthDayInWeek - 1, 7)>
    <cfset var firstThur = dateAdd("d", 4 - fourthIsoDayOfWeek, fourthDayOfYear)>
    <cfset var lastWeek = iIf(fourthDayInWeek EQ 8 OR (isLeap AND fourthDayInWeek EQ 7), 53, 52)>
    <cfset var firstIsoDayOfFirstWeek = dateAdd("d", -(fourthIsoDayOfWeek-1), fourthDayOfYear)>
    <cfset var firstIsoDayOfLastWeek = dateAdd("d", -7, firstIsoDayOfFirstWeek)>
    <cfset var lastIsoDayOfFirstWeek = dateAdd("d", 6, firstIsoDayOfFirstWeek)>
    <cfset var weekDiff = iIf(dateCompare(date, firstIsoDayOfFirstWeek, "d") EQ -1, 0, 1)>
    <cfif dateCompare(date, firstIsoDayOfFirstWeek, "d") EQ -1 AND dateCompare(date, firstIsoDayOfLastWeek, "d") NEQ -1>
        <cfset weeknum = lastWeek>
    <cfelseif dateCompare(date, lastIsoDayOfFirstWeek, "d") NEQ 1 AND dateCompare(date, firstIsoDayOfLastWeek, "d") NEQ -1>
        <cfset weeknum = 1>
    <cfelse>
        <cfset weeknum = weekDiff + (dateDiff("d", firstThur, nearestThur) / 7)>
    </cfif>
    <cfreturn weeknum>
</cffunction>
Doug

It works the first time, but after the first syncring it says. Sync encountered an error whike syncring: Unknown Error. Sync will atomatically retry this action). Please help my Favorit Browser for last 8-9 years. Thanks To The Tema Behind It...

The rules about donations

Hi crogs571
The first sync report shows an error with the history:
<pre><nowiki>1415979204255 Sync.Status DEBUG Status for engine history: error.engine.reason.record_upload_fail
1415979204255 Sync.Status DEBUG Status.service: success.status_ok => error.sync.failed_partial
1415979204255 Sync.ErrorHandler DEBUG history failed: <html>
<head><title>413 Request Entity Too Large</title></head>
<body bgcolor="white">
<center><h1>413 Request Entity Too Large</h1></center>
<hr><center>openresty/1.7.0.1</center>
</body>
</html></nowiki></pre>

Date shows as correct day-January(for any month)-correct year;

For example: 2011-09-05 shows as 5 January 2011.
This is transferred onto all date stamps on documents in mail, i-photo etc
In mail inbox I can correct the issue by narrowing the time, date column, wwhich then shows correct numerical date values, but 'January' is still incorrectly printed on reply emails etc.
This is a serious problem as we have to keep logs of correspondence etc.
Has anyone experienced a similar problem?

System Preferences>Language & Text>Formats.
Set it up the way you want it.

MMPV for last month of year

Similar Messages

Maybe you are looking for