MMR-MRP1

Hi,
While i am working on MRP/CBP, i am facing a error as 'Specify a valid procedure'...
The procedure which i followed is as follows
1.MRP is activated to relevant plant through navigation
spro - mm - cbp - Planning - Activate material requirements planning
2.Creating a material...
I took material type as ROH(Raw material)
Industry - Mechanical
At mrp1
Mrp type = VB
Lot size = FX
i entered the max stock, reorder point and mrp controller = 001
but it throwing a error as 'Specify a valid MRP procedure'...
But my frds are not getting any problem during this procedure.
I refered OPPR, OMDQ, OMD0(i am not able to understand what changes to be done)
But i am not understanding why the problem is coming.
Regards,
Madhu Kiran.

Kiran
Manintain the Reorder Point & Fixed lot size
Thanks
Siva

Similar Messages

  • What are the views/fields that we can't change by Mass maintenance of MMR(material master record)?

    Hello friends,
              I would like to know the fields/views that we can not change by using mass maintenance of MMR if there are open PO for that particular material in concern. Likewise there was a question in SAP certification exam having options: "base unit of measure", "material type" and so on....

    in general you can change any field that can be changed in MM02. if the field is grayed then you cannot. e.g. if you make use a MRP profile. and in this profile the maintenance of those fields is disabled then you cannot do it MM17 either.

  • MRP group field can not be displayed in MRP1 view

    Hi all
    MRP group field can not be displayed in MRP1 view
    please guide me
    thx

    Hi avinash
    consulte your MM guy material master screen group and selection is done by MM guys in general. There they can do setting for this.
    Also why you need MRP group. If it is maintained. It should be done properly otherwise it will create lot of problems.
    Regards
    J . Saravan

  • Conditions in Purchase Order - No scroll bar/Sales Tax value not in mmr

    Hello,
    I am stuck in a weird problem where I have created a Condition Calculation Schema, assigned it to Schema group and assigned that schema to vendor, but when i open my condition in the PO, it does not give me scroll bar i.e. I have calculation Schema with around 10+ conditions, but when I try to put all the conditions in PO at one time, the scroll bar doesnot come up and without it, I cannot view all my conditions in the PO. Its saving the conditions though as seen in report, but cannot display it in PO without the scroll bar. Any ideas?
    Another assignment is that sales tax value and % should not increase the mmr value at time of GR, but when I do GR its adding the sales tax value to mmr value, my requirement is just Gross price be added to mmr, not sales tax value/%. I tried the Statistical checks in Calculation Schema, but to no vail, at GR the sales tax value is being added to the mmr record. Any ideas?
    Lots of points awarded for answer/answers.
    Any clue will help
    Thank you/Afshad
    Edited by: Afshad Irani on Jan 14, 2009 10:27 AM
    Edited by: Afshad Irani on Jan 14, 2009 2:32 PM
    Edited by: Afshad Irani on Jan 15, 2009 6:19 AM

    Q Another assignment is that sales tax value and % should not increase the mmr value at time of GR.
    Ans:
    Dear Afshad,
    Reference to your question, you need to do few settings in your Condition Type and Pricing Schema, if you need Sales Tax value & % not to include in your Material value.
    1 - In SPRO, Check that in your condition type, Control data 2 tab, Accruals check box should not be selected.
    2 - In your Calculation Schema, against your condition types for Sales Tax % and Sales Tax Value, select the check box for Manual & Statistics.
    3 - Also in your Calculation Schema, you should not select any account key in AccKey (Account Key) and in Accruals colomns.
    If any one of these setting is not defined, the valuation price for your material will be increased due to the fact that your settings for Condition type and Calculation Schema is allowing the same to hit the value of your material directly.
    Hope it works for you.
    Regards
    Jibran

  • Problem in entering stock as well as closing posting period for MMRs

    Dear All,
    Whenever I do goods receipt (tcode: MB1C, movement type: 561)  and enter, it gives the error "Posting only possible in 2007/05 and 2007/04 in CoCd XXXX. I know I need to close posting periods for MMRs. But the while doing that using MMPV for 2007/06 and CoCd XXXX, it comes to a screen stating following:
    <b>Client YYY
    Period entered (month/year) :06 2007
    Incorrect period in control rec of CoCd XXXX; no conversion The current period of record (month/year) is 05 2007</b>
    Alternatively, I try to close period thru OMSY and change period on "Pe" column, a window pops up saying "The CoCd XXXX no longer be initialised"
    Can anyone help on this? I'm stuck and can't go further. Reward points assured.

    Hi
    It is very clear from the meassage that the current period is 05/2007.
    You have to close this.In the screen you have to enter 05 2007.Then it will close 5 th period and opens 6th period.then close 6th period so that it open the current period 7 (If the fisical year variant is calander year).
    Regards
    Ramakrishna

  • Restrict PO  based on the maximum stock level qty in MMR

    Hi
    We have maintained Maximum Stock level in MRP1 in Material Master. Is there any facility which can restrict the Purchaser, not to raise any PO more than maximum stock level qty which is maintained in Material Master ??? how to do ?
    Is there any user exit or warning mesge settings?
    Edited by: Jayakumar Raju A.S on Jan 13, 2010 8:55 AM

    If you want do such check then you have to do that in a userexit.
    I am personally the opinion that a purchaser does not extend the PO quantity just for fun. Maybe he gets a better price if he procures a little more. It is probably a lack of training and knowledge about each others work, that a buyer does not understand what the maximum stock level is , and the planner may not understand the particular issues a buyer deals with daily.
    Bring those two together an let they explain each other the reason for the maximum stock level and the reason why the  order quantities are changed.  Maybe they will finally change the maximum stock level, maybe the buyer will not change the quantities anmore without discussing it first with the planner......

  • MMR Purchase Order Text

    Hello Guys,
    I am buidling a report in SQ01 to bring information abaout my MMR using table MARA some extra table.
    The situation is that in my MMR I have extra description for the equipment on the Purchase Order Text view which I could not find a way to bring in my Query.
    Does anyone no a way to report what we input in the MMR on Purchase Order Text view? That would be very helpfull.
    Thanks
    Carlos Araes

    Hello Guys,
    I am not sure if I was clear in my explanation. When I am creating the MMR I am adding on the MMR view Purchase Order text some extra description for the MMR which when I use it populates the PO the fields on table table EKKO or EKPO.
    The difference here it is that I am looking to bring this information from table MARA. The extra descritpion I input on MMR view Purchase Order text is not available in table MARA as well as EKKO or EKPO any way.
    From table STXH I could not identify where the input would be allocate could you give a bit more details regarding this table?
    thanks
    ARAES

  • BDC- To add ABC indicator in MM02-- MRP1

    Hi,
    I am working on BDC- To add ABC indicator in MM02--> MRP1.
    Problem -->
    In some material+ plant  - Reorder point is there. In this case I need to take additional 'BDC_okcode' for ENTER.
    HOW CAN I DO THIS? 
    I tried it with 'Select statement' between the Perform statement, but it's not working?
    IF wa_file-matnr IS NOT INITIAL.
          PERFORM bdc_dynpro      USING 'SAPLMGMM' '0060'.
          PERFORM bdc_field       USING 'BDC_CURSOR'
                                        'RMMG1-MATNR'.
          PERFORM bdc_field       USING 'BDC_OKCODE'
                                        '=ENTR'.
          PERFORM bdc_field       USING 'RMMG1-MATNR'
                                        wa_file-matnr.
          PERFORM bdc_dynpro      USING 'SAPLMGMM' '0070'.
          PERFORM bdc_field       USING 'BDC_CURSOR'
                                        'MSICHTAUSW-DYTXT(11)'.
          PERFORM bdc_field       USING 'MSICHTAUSW-KZSEL(11)'
                                         'X'.
          PERFORM bdc_field       USING 'BDC_OKCODE'
                                        '=ENTR'.
          PERFORM bdc_dynpro      USING 'SAPLMGMM' '0080'.
          PERFORM bdc_field       USING 'BDC_CURSOR'
                                        'RMMG1-WERKS'.
          PERFORM bdc_field       USING 'RMMG1-WERKS'
                                        wa_file-werks.
          PERFORM bdc_dynpro      USING 'SAPLMGMM' '4000'.
          PERFORM bdc_field       USING 'BDC_OKCODE'
                                        '=BU'.
          PERFORM bdc_field       USING 'MARC-MAABC'
                                        wa_file-maabc.
          SELECT SINGLE minbe INTO v_minbe FROM marc
                       WHERE matnr = wa_file-matnr
                         AND werks = wa_file-werks.
          IF v_minbe GT 0.
            PERFORM bdc_field     USING 'BDC_OKCODE'
                                        '/00'.
          ENDIF.
        ENDIF.
        CALL TRANSACTION 'MM02' USING it_bdcdata MODE p_mode MESSAGES INTO it_msg.

    Hi,
    Try to use Bapi and see ..Please find the sample code.
    LOOP AT t_itab INTO wa_itab.
        CALL FUNCTION 'CONVERSION_EXIT_MATN1_INPUT'
          EXPORTING
            input        = wa_itab-matnr
          IMPORTING
            output       = wa_headdata-material
          EXCEPTIONS
            length_error = 1
            OTHERS       = 2.
        IF sy-subrc <> 0.
          MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
                  WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
        ENDIF.
    prepare the follwing structres ( plantdata,headdata, plantdatax)       .
    * Select the MRP view
        wa_headdata-mrp_view =  'X'.
    * Call the Bapi to create the MRP view.
        CALL FUNCTION 'BAPI_MATERIAL_SAVEDATA'
          EXPORTING
            headdata       = wa_headdata
            plantdata      = wa_plantdata
            plantdatax     = wa_plantdatax
          TABLES
            returnmessages = t_return.
    ENDLOOP
    Regards,
    Nagaraj

  • Difference "abc indicator" in MRP1 & "cc phys inv ind" in plant data stor1

    Hello,
    we want to do cycle counts and I noticed that there are two different field in the material master for that.
    I think they have a different purpose?
    "ABC indicator"  field in MRP1 view
    and
    "cc phys inv ind" field in plant data/ stor 1 view
    Can somebody please explain the difference?
    Thanks
    Anne

    MC40 and MC41 dont need customizing, setting can be made in selection screen.
    ABC analysis for cycle count MIBC needs customizing.
    In MRP1 view the field name is MARC-MAABC while on storage location view the field name is MARC-ABCIN.
    The one on storage location view is used for cycle count, and includes ABC and D, and is caclulated by MIBC transaction.
    The indicator in MRP1 view is calculated and updated by MC40 and MC41 transaction
    MICN is the only one that can update the indicator used for cycle counting.
    if you execute both transaction with same settings, then there should be the same result.
    However, pretty often the cycle count indicators are precalculated by MICN based on consumption, but then individual items are changed to get a different indicator for specific reasons.
    You may have a low value item, which is very important for your processes.
    Based on consumption values it may get indicator C, but if you have differences on that item then it is a critical factor for your business, hence you want count it more often, thus you would manually change it to B or even A. (which can be done directly from the MICN report)
    The focus on both indicators can be equal in many companies, but may also be different in other companies, hence you need 2 indicators for ABC analysis

  • Foreign trade data for MMR&CMR

    Hi All,
    Is it manditory to create the MMR with Foreign Trade/Export dara tab for Export Materials, if we select this for what are all settings we have to do.
    I am getting an error while doing the billing "DOCUMENT XXXXX HAS BEEN SAVED (FOREIGEN TRADE DATA INCOMPLETE"
    bcz while creating the MMR I have selected the Foreign Treade/Export data tab.
       And similarly while creating the CMR for Exports is there any tab/field I need to take, if so plz inform me.
    Thanx&Regards,
    Ramu

    Hi Ramu,
    While creating Entries if you try to attach Procedure which is not defined for the Country SA then system will give you this error.
    Do as Follows:
    IMG - SD - Foriegn Trade - Basic Data for FT - Define Procedure  & Default values.
    First Define Procedure for teh Country.
    Then add new entry in Procedure Default. While adding note that in case of Default value for procedure, system gives you option to select from allowed procedure.
    These procedures are the one you maintained earlier.
    If the procedures are not linked then it will give error
    "Entry SA 02  does not exist in T616 (check entry)"
    Hope this help you.
    Regards,
    Dnyandeo H. Ainarkar

  • Delete a planned order for materials changed to ND (No planning) MRP1 view

    Hi guys !
    1. I changed the MRP Type "reorder point" to "no planning" (ND indicator in MRP1 view) for some materials.
    2. ¿There is a process to regenerate or delete the planned order created before or have to be a manual process, for example from MD15?
    Regards & thanks in advanced !

    >
    FRANCISCO RODRIGUEZ wrote:
    > Dear  kumar kumar,
    >
    > Before put the question, i was testing the MRP with delete & create new planned order but it doesnt work..why? because when you changed the material to ND, the MRP transactions like MD01, MD02, MD03, send a error message: "Material not plannig" so they does not consider the material anymore.
    >
    >  Definitly, i think to delete in a manual process (MD15).
    >
    > Thanks to everybody.
    Dear,
    even i know ND will not plan ( MRP )
    My view was before changing to ND, delete the existing header material demand & Run MRP
    with option 3, so that system will delete all plan orders of this material ( No Manual process )
    Anyways Good Luck !!!
    Regards
    Madhu

  • Extend ABC Code clasification to include code = "D" MRP1 field -  tx MM01

    Hi All
    I need to extend ABC Code clasification to include code = "D"  in MRP1 - ABC Indicator field in TX MM01, can someboby tell me how pls!!
    thks in advance

    you cannot have a D for this field.
    See transaction MC40 which is used to calculate and update this field.  There is nothing to add a D in the analysis strategy section. So you would need to re-write this transaction as well if you want a D.
    Instead use the CC - Abc indicator field in storage location view. Here you can have a D.

  • Maximium lot  size is 200 in MRP1 view.I have purchase order which 400 qty

    Maximium lot  size is 200 in MRP1 view.I have purchase order which 400 qty , but my system is allowing to  pick 400 qty, can you please say wat may be the reason
    regards
    sakthi

    Hello,
    As others others experts are saying your maximum lot size will only work for MRP run not for manual created PR.
    The system takes this value into account during the automatic lot size calculation for planned orders and production orders. The lot size of the individual orders cannot exceed this value
    Regards.
    Alok Tiwari

  • Entry in fields to make compulsory /Required Entry for QM tab fields in MMR

    Dear Gurus ,
    I need to make some fields as Required Entry in Quality Management tab of Material Master record
    So that the users compulsorily need to fill data before saving the MMR. The fields which I want to
    make compulsory are visible after clicking the "Inspection setup" button in the QM tab , the various
    fields are "post to insp. lot", "inspection with task list" etc. like this about 10 fields ,
    I went in OMS9 , but could not find the field ref. group for table RMQAM  , also could not find these
    fields in OMSR.
    Please guide how to make these fields compulsory. Thanks in advance.

    >
    Anil Shan wrote:
    > Dear Gurus ,
    >
    > I need to make some fields as Required Entry in Quality Management tab of Material Master record
    > So that the users compulsorily need to fill data before saving the MMR. The fields which I want to
    > make compulsory are visible after clicking the "Inspection setup" button in the QM tab , the various
    > fields are "post to insp. lot", "inspection with task list" etc. like this about 10 fields ,
    > I went in OMS9 , but could not find the field ref. group for table RMQAM  , also could not find these
    > fields in OMSR.
    >
    > Please guide how to make these fields compulsory. Thanks in advance.
    I don't think this is possible in standard...since all this fields (ticked or un-ticked) flow from the configuration of Inspection types in QM...you have to see there in QM configuration whether anything is possible...
    Regards,
    Indranil

  • Tax Classification of MMR

    Dear Experts,
    I have an issue with tax classification of material master ,
    In MMR i have maintained  three tax categories ,with deffreent tax classifiaction , and  i want to access  record of only one last 3rd  tax classifiaction from MMR in sales order ,
    but in my case in SO it is accessing 1st  tax classifiation only , if i see in pricing analysis it is showing 1st classifiaction combination ,is missing where as i maintained record for 3rd tax classification combination it is not accessing in SO,
    So anybody advoise how to solve this issue
    Early reply will be appriceated 
    Caprin,,,,,,,,

    Hi,
    Laxmi
    Thanks for u r reply
    U r right, but ii my case system showing only 1st tax classification from MMR,for example,
    1st is MWST tax category and classification code is E-Excise
    2nd is UTXJ tax category and classification code is  E-Excise
    3 rd is ZYXJ tax category and classification code is 1-Normal
    The above setting is in MMR,
    and i have maintained condition record for 3rd condition type, When i create a SO system showing ZYXJ mandotory record is missing, it is showing missing for E combinastion in analyasis ,
    Can you help me,how to access only 3rd tax condition record in SO
    Caprin.......

Maybe you are looking for