MMR -STORAGE BIN ENABLE
deal all,
Material master plant storage view storage bin field was disable mode. i m trying to make it enable, checked in oms9 already its in optional only. field reference, mater type, mm01 all i have checked its in optional entyr. any setting required for making enable.
The bin field at material master storage location view becomes only accessable if you enter a storage location at the organisation pop-up when you start accessing the material master.
if you dont specify a storage location, then the field is not visible
Similar Messages
-
Enable Storage Bin (MARD-LGPBE) in Logistics Store Retail (tx MM42)
Hello
I need enable storage bin (MARD-LGPBE) in Logistics Store Tab in transaction MM42 in subscreen Warehouse Data but I don't know how, can someone help me?
I don't work with Warehouse Management Module.
Thanks.Thanks Ramesh.
But how do i go about finding which exit, should i write the code in ? Do i have to write it in the PAI module of that screen, by creating a new module?
Edited by: Imran on Mar 5, 2008 7:58 PM -
Change Storage Bin Number in 309 movement type
Hi Gurus,
I have problems with creation TO for movement type 309(material to material posting), when i want to create the TO for that movement type, i can't change the destination bin.. The destination bin field in that TO is disable, how to make that field enable?
I try to add an user exit after creation of that TO, the user exit is MWMTO001.. so the user exit used for change the storage bin number after the TO created.. but that user exit never triggered after TO created.. How it could happen?
Any suggestion, how to change the storage bin number when i want to create TO from 309 movement type(material to material posting)?
Kind Regards
KenHi Kris,
Ya, i already create the bin number, for example i material A fixed to bin 00001 and material B fixed to bin 00002, when i do movement 309 from material A to material B, why the bin goes to 00001? why not goes to bin 00002? Because material B is fix to bin number 00002..
For your solution, i just can change the bin during confirmation of the TO? Because, in this case, confirmation of that TO done by external system, so the external system will send idoc to SAP to confirm that TO..
Regards
Ken -
Need to enter the storage bin manually
Hi Team,
Currently while posting the IM movement type 311, storage type(FIFO) search strategy is configured for stock removal process.
Now the requirement is for certain materials, while doing the transaction, we don't want to pick the bin automatically(by using the FIFO), we want to enter the Storage bin manually, please suggest.
Advanced Thanks,
AN Reddy.Hello A.N Reddy,
There is a confusion here. Are you talking about WM or EWM.
If it is WM, then, I would suggest you to enable, Manual Storage Bin Input for respective WM Movement Type in WM Movement Configuration. That will request you to enter Storage Bin Manually during TO Creation.
If it is EWM, For your process type, Make Search Seq field as Blank and keep your Putaway Rule as " No Putaway Rule ". This will request to you to enter the storage bin Manually during Warehouse Task Creation Process.
In EWM Outbound Process, you have to empty your search criteria in your Pick Rule.
Regards,
Sathish -
HIya Gurus,
I have got a requirement where the user is gonna change the Storage bin via a report. I have created the report with the input enabled field for the new storage Bin to be entered. Now i need to overwrite this new value in the database. I am trying to use CALL TRANSACTION via MM02 but the select views are differ for materials.
Can any one help me out with any alternative like a BAPI or if there is a possibility to use Call transaction without the select views.
Your suggestions are valuable to me,
Thanking You,
ZIaHiya Gautham,
Thanks for your Quick reply. I just checked BAPI_MATERIAL_SAVEDATA , it doesnt have any storage bin field in it. Can you please eloborate on your view about this BAPI.
Thank you very much.
Cheers,
ZIa -
Hi Experts,
While doing the goods issue while confirming the production order (Mvt 261), i am getting error message for the component " Storage bin 01 does not exist (check your entry) Message no. L9 009"
I dont know why it is only checking storage bin as 01, where as stock is maintained in other bins also,
Whether i am missing any point in this.
Pl help.
regards
UtsavHi,
Find out why movement type for a component is looking for 01 as storage bin.
I am also finding out this issue.
It must be some fixed bin assigned at storage type level in material master.
I checked in MMR, but no fix bin is assigned in WM2 view. Field is blank. No entry is maintained.
Or check movment type setting what is the source
Where to check this?
Also check any storage bin created for production supply storage type.
Where to check this?
Also youmay need to check any special Movement indicator in material master WM 1 view.
This field is blank in MMR. -
Row consolidations of same material in storage bins.
Hi Experts,
we have a requirement below,
. Current Process: Inventory Analysts utilize an established query in SQ00 to enable them to perform row consolidations of same material in storage bins to maximize storage bin capacity and create empty storage bins in warehouses .
Example: Row 621 only has 1 pallet and that pallet will fit in row 625(Row) of which only has 31 but the max is 32 in that bin. Again you see bins 725 and S-27(material) only have 1 pallet each and can fit easily in 715 as it only has 15 pallets but can hold 32.
. The analyst take the data from this query and manually create a Row Movement sheet to give to the forklift drivers to perform the assigned movements.
1) is it possible SAP to do automate this task?
2)Can SAP logically determine this equation?
3) Is it possible SAP to generate this spreadsheet and go ahead and create the TO in the background?
Please do the need full ASAP, Quick response is highly appreciated .
Thanks and Regards,
ChiranjeeviOf course you can do this, but not with SQ based reports.
You will need to code a custom ABAP report.
First you will need to find best matches in storage bins, then use BAPI for TO creation.
You will easily have all the info from the source and destination bins from your matching
table/data. You can search forums for more info on this BAPI, but I can tell you it is pretty
easy to use even for an inexperienced ABAP-er.
I have created a report for this in my company a while ago, but didn't implement automatic
TO creation since we wanted to give our WH people freedom and didn't want to create a huge
amount of TOs which need to be cancelled if WH workers don't have time to perform this action.
But this is a great tool for any warehouse, especially with bulk non-mixed storage types with
a large number of bins.
Regards -
Picking from another storage bin
During picking TO creation the system automatically determines the source storage bin from where the materials should be picked. Lets say the items to be picked are not there and cannot be picked. In this case the operator should be enabled to pick from another storage bin, however the system does not allow this. (This is via mobile data entry and in a bulk SU manages st. type).
Is there a way to allow picking from another storage bin? If not, can the TO be created without any source determination? Even if I switch off picking strategy, the system expects entry of source bin at TO creation.Hi,
With out a source storage bin , pick TO cannot be created currently. If at all you want a different source bin, you have to cancel the TO, block the current bin and then recreate the TO. That is an exceptional case and should be handled inside the system.
Thanks
Vinod. -
Dear Gurus,
We have configured our WMS successfully with FIFO enabled environment. Now we are implementing barcode and we are interested to get issuance storage bin which is WMS proposing for issuance. Is there any BAPI for which we can determine storage bin for a material from which system will issue after posting.
Regards,
FRI have written my own BAPI to get required results so problem resolved.
Regards,
FR -
Hi Folks,
Picklist should show the storage bin from material master.
whats the tcode to check this ?
Thanks & Regards,
Raju.Hi Raju,
in MMR - WM 1 view storage bin is available. Do you face any problem to pick this field?
or
Are you looking something different ?
what is the application type you are using for pick list - I guess its V6- Handling Unit
Regards,
ReazuddinMD -
Report for Material - Storage Location - Storage Bin
All SAP Gurus,
Is there any standard report available in which we can find out the storage bins for list of materials?
(We have not implimented Warehouse MAnagement)
Regards,HI,
You need to have Warehouse management in place in order to view the storage bins for materials,
MMBE of MM cannot give you the idea of storage bins.
Hope this helps.
Regards,
Prasanna
Award pls if helpful. -
Storage bin Capacity utilization is greater than 100%
Hi,
Via LS03N, I can found that some capacity utilization is greater than 100%, this must be incorrect, what's the reason? is there any report to update the capacity utilization for storage bin?
Kindly please advise.
ThanksFor the capacity checks, the remaining capacities or the used weight in the storage bin master data are updated with every putaway or picking. If you change the inspection method in the current operations or you change capacity or weight data of materials or storage unit types, you then need to make a comparison of the data. You can make this comparison with report RLS10200. First read the documentation before you start the report.
-
Not Printing the source storage bin in the layout
Hi Gurus
As i am printing the layout to pick the goods for delivery, in which iam not getting the source storage bin for some deliveries only. sometimes its picking and some times not, what has been the reason behind it. i have take the help of an Ababper to check the conditions if any for that filed. but i cannot find any.
Please help me,
Thanks in advance,sorted out by setting the SPAD - Device types
format, just added the zxxx format to this and now it is working -
T.code for viewing stock at storage bin
Hi all,
What is the t. code used for viewing the stock at storge bin?I know this is WM question but your help is appreciated.
Regards,
ShailendraHi,
Following are the T-Codes:
LS26 Warehouse stocks per material
LI05 Inventory History for Storage Bin
LX02 Stock List
LX03 Bin Status Report
MB52 List fo warehouse stocks on hand
Regards,
Suresh' D. -
Cancel (reverse) Return Order, PGR not possible due to storage bin in 904
Hi gurus hope someone can explain in detail with transaction what am I missing since I'm MM guy and dont know very well SD transactions but here's my scenario,
There is a return order with a delivery (1110500002), then PGI (651), this drive me to process a Tansfer Req to move it from 904 to 010 storage type, and then do the billing, up to here the process is going well.
The problem comes when trying to reverse the above described process, I start with reverse the bill sith VF11 and then try to cancel the PGI ( PGR) with VL09 but system says "Storage bin 001 904 1110500002 does not exist (Check your entry)"
This is why I'm trying to fix the issue as MM guy, but I don't know why the error comes, this bins in 904 should be dynamic and create temporaly the bin 1110500002 which is the delivery that was created when the first return order was created.
I dont know if this error is related to MM movement types or to some config at the delivery type, o maybe the process we are following is not the correct for this because in transaction OMLR for IM 651 there is WM 651 but for 652 IM it's WM counter part is the general GI 255 mvt type so
Just to mention what I think that need to happen for the reverse of the return process is to cancel the bill then cancel the delivery and at this point negative stock should come into 904 bin 1110500002 and the creation of a TR to move from 010 to 904 after doing this TO then stock in 904 will be zero.
Please advise on how this process should happen.
Regards.Hi TQ,
Thanks for your reply, but I didn't understand what you mean with compare material master, compare it with what? And also I am not really sure that this could be the problem because I have this issue only when reversing the return, this means when I do the return the stock actually goes to 904 1110500002 so this means that the material has mantained correctly WM views in the material master.
Can you elaborate more in detail how you solved your error few months ago?
Thanks and regards
Maybe you are looking for
-
Printing from InDesign CS4 on Mac Snow Leopard to HP officejet pro K5400
I recently started using a Mac Snow Leopard with InDesign CS4; for awhile it printed fine. Then, dealing with a book mss, I had to get InDesign to convert the document to a PDF, and since that time, the Officejet Pro k5400 will only print in what app
-
even is catalyst cs 5.5 two of my problems do not resolve. bad video quality in fullscreen. i have some videos for offline view (768x576 @ 2600 kbps) but still fullscreen view is messed up, all blocky, not proper video interpolation. in vlc or any ot
-
IChat 5.0.1 keeps asking to accept buddy's messages (AIM)
I already have buddies on my buddy list and have privacy set to block only specific people. When these buddies IM me, it always asks if I want to accept their messages if there isn't an existing IM window conversation with them. How do I fix this?
-
How do you get rid of the trial version? I have paid, tried logging off and back in but neither Photoshop nor lightroom will let me come off the trial. What haven't I done?
-
X201 Wireless switch Hardware problem - PLEASE HELP
Hello everyone, I have been a regular reader of this wonderful forum and have also participated on a few questions. I have an x201 which I bought from UK 6months back. After a smooth sail for many months and just when I thought life was going good,