MMS for SNMP with eDir 8.8.2

Hello,
We have been using MMS for NetWare, Windows and Linux, with the NDSTRAP.NLM providing eDirectory monitoring with eDir 8.7.3 on NetWare
We are moving to eDir 8.8.2, and I was wondering if NWTRAP will still work, or do we need to configure the DSSNMPSA.NLM? i notice that there are two different MIBs that basically have the same traps, but different OIDs. What gives...?
Cheers,
Dennis.

dgerol,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://support.novell.com/forums)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://support.novell.com/forums/faq_general.html
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/

Similar Messages

What are the settings for apn data and mms for iphone 4 on straight talk?

what are the settings for cellular data network APN DATA and MMS for Straighttalk sims on IPhone 4?I cant send or recieve pictures.My service keeps losin signal constantly saying no service then 1 bar,2 bars,3 bars...then back down to no service.It drops calls.Iv been trying to find out the answer to this problem for 2 weeks!I have no Profile selection in my settings either to do wat its showing online on one website.and have entered numerous diffrent APNs and none have worked!!!!PLEASE HELP!!!

They're asking a question about carrier settings for their iPhone. I think that has everything to do with Apple.
Maybe they did already ask Straight Talk. I've called Straight Talk before... they're not too helpful.
You know, this forum would be much friendlier if people in this forum would quit squabbling, & posting comedic replies, not too mention name calling (like I did), when people are just needing some help.
It's also frustrating that people stick up for the guy who doesn't help, but rather takes the time to post some smart alec reply. Granted, I shouldn't have name-called... some people just frustrate me when they act like that.
Admittedly, there ARE some grey areas when it comes to carrier questions... but let the moderators do their job when someone is asking innappropriate stuff. And if the mods aren't chiming in, then that's a good indication that what the thread is about IS in fact Apple related.

Building Net-SNMP with gcc and Solaris 10's Forte-built Perl

The 5.0.9 Net-SNMP that come with Solaris SPARC is too old for our users. Building the latest version appears to be basically impossible and I'm just about to bail and just build yet another version of Perl for Solaris 10 so it will work. But on the chance that someone has done this:
I am trying to build Net-SNMP 5.4.1.2 with the Sunfreeware gcc. The configure script seems to ignore the --disable-perl-cc-checks flag:
./configure with-perl-modules disable-perl-cc-checks
configure: error: This build is using a GNU C compiler (gcc) while Perl has been compiled with a non-GNU (or non-working) compiler (cc). This likely won't work for building with Perl support. Either specify a different compiler (--with-cc=PATH), disable this check (--disable-perl-cc-checks) or build without Perl (--without-perl-modules).
Has anyone successfully done this? I was hoping to get a successful configure run, then build the binaries, and then further tweak the perl makefiles with "GCC=/usr/perl5/5.8.4/bin/perlgcc" or something.

configure: error: This build is using a GNU C compiler (gcc) while Perl has been compiled with a non-GNU (or non-working) compiler (cc). This likely won't work for building with Perl support. Either specify a different compiler (--with-cc=PATH), disable this check (--disable-perl-cc-checks) or build without Perl (--without-perl-modules).The perl supplied by Sun should be compiled with Sun Studio and the error mentioned above seems to reflect this.
So, either build perl first with sunfreeware's gcc and then move on to net-snmp or install and use Sun Studio instead of gcc so perl is happy.
alan

Vpdn: searching for snmp oid to log out vpdn session

Hello colleagues,
Cisco 7204 works as vpdn server.
There are two problems:
1) I'm searching for snmp oid to log out , terminate vpdn session
2) radius server does not receives snmp statistics of incoming traffic of vpdn users.
Please is anyone able to assist me?
aaa new-model
aaa authentication login default local
aaa authentication ppp default group radius local
aaa authentication ppp VPDN local group radius
aaa authorization network default local group radius
aaa accounting delay-start
aaa accounting update periodic 3
aaa accounting exec default start-stop group radius
aaa accounting network default start-stop group radius
aaa session-id common
vpdn enable
vpdn-group 1
! Default PPTP VPDN group
description HOMENET
accept-dialin
protocol pptp
virtual-template 3
interface Virtual-Template3
ip unnumbered Loopback1
peer default ip address pool vpdn-pool
no keepalive
ppp authentication chap VPDN
snmp-server community xxxxxxx RW
snmp-server chassis-id 0x0E
snmp-server enable traps tty
radius-server host x.x.x.x auth-port 1812 acct-port 1813
radius-server timeout 60
radius-server key 7
radius-server authorization permit missing Service-Type
Best regards, Petr Akimov

Hello –
I received a reply from the developer of the script, and listed below is the new code that was suggested:
#!/bin/bash
value=`snmpwalk $1 -v1 -c $2 .1.3.6.1.2.1.25.1.5.0 | cut -d " " -f4`
if [[ value -gt $3 ]]
then
echo " $value Users Online, Critical!"
retval=2;
else
     if [[ $value -gt $4 ]]
           then
           echo " $value users online, Warning!"
           retval=1;
           else
           echo " $value Users online, fine."
           retval=0;
           fi
fi
exit $retval;
I checked the server in question, and there were two, 2, user logins active on the system. I ran the snmpwalk command, and the output was the following:
HOST-RESOURCES-MIB::hrSystemNumUsers.0 = Gauge32: 15
I then modified the script to include the above text, and ran it again. The output was the following:
15 users on line, Normal.
For some reason, the value of 12 appears to be that for no users logged into the system. I am not sure why that is the case.
If nothing else, progress has been made with the modification of the script. The snmp service that I have installed on the server is that which came bundled as a
feature with the server. The only thing that was not installed was the SNMP WMI Provider option.

Snmp with ActiveX

I bought IP*Works! S/SNMP V6 ActiveX,but I cannot get the message of snmp ,who have the example of snmp with Activex? could you send it to me?thank you very much

I got the full answer from NI support, here it:
Exceptions thrown from external code modules will be stored in Step.Result.Error . You can select in TestStand how you want it to handle the error by going to Configure>>Station Options>>Execution, and then setting the drop down for 'On Run-time Error' to the behavior you want.
You can program your own error handling by using the SequenceFilePostStepRuntimeError callback. There is an example on how to use this callback in the example below.
C:\Program Files\National Instruments\TestStand 3.5\Examples\Callbacks\PostStepRuntimeErrorCallback
This sequence will allow the user to choose how to handle the error. You can customize this sequence, or create your own, to handle exceptions how you desire.
Have a nice day!
Thank you & Best Regards
*I use LabVIEW 8.X & TestStand 3.5/4.0.1 versions only

LDAP import for Asset Inventory - eDir support?

After reading the docs, it seems to indicate that if you wish to do an LDAP import for Asset Inventory (for demographic data) that you can only do a one to one relationship for the main item types.
Meaning:
eDir User stuff can only be mapped to ZCM "user" stuff
Workstation stuff can only be mapped to ZCM Device stuff.
Since eDir does not have workstation things (unless you happen to be migrating from ZFD, in which case the eDir items will eventually be removed via the AWI process or no longer updated), I have to ask if eDir is truly supported?
I can see AD because users AND computers have to be in AD (well unless you wish to punish yourself and have your pc's be in a workgroup and not be in your AD Domain, but I've yet to see any customer have an AD domain and NOT have their workstations be members of said domain).
But seems the only LDAP import you could do with eDir (especially if ZCM is your first install) is user level items, but I'm not sure that would actually accomplish anything for DEVICES.
We had wanted to take the user level "location" and "department" fields and map them to the workstations. Appears the only way to do this is via the old method used by jared jennings for ZFD (I see he's updated it for ZCM as well)
Am I wrong? Is there a way to map eDir user level attributes to the device so that when you look at Site/Department on the device it has the items based up on the user that logs into it?

kjhurni,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/

SharePoint Foundation 2013 - Multi-tenant Install and OneDrive for Business with Yammer i

Hello,
After installing SP Foundation 2013 (SP1) with Partitioned service applications we have noticed that while clicking on the "yammer and oneDrive" link the below error message comes up:
_admin/yammerconfiguration.aspx
any ideas??
http://technet.microsoft.com/en-us/library/dn659286%28v=office.15%29.aspx
we have also noticed that MS mentioned "OneDrive for Business with Yammer integration doesn’t work for multi-tenancy or partitioned service applications for on-premises deployments"
ja

ULS
Application error when access /_admin/cloudconfiguration.aspx, Error=Object reference not set to an instance of an object.   at Microsoft.SharePoint.WebControls.SPPinnedSiteTile.OnInit(EventArgs e)     at System.Web.UI.Control.InitRecursive(Control
namingContainer)     at System.Web.UI.Control.InitRecursive(Control namingContainer)     at System.Web.UI.Control.InitRecursive(Control namingContainer)     at System.Web.UI.Control.InitRecursive(Control
namingContainer)     at System.Web.UI.Control.InitRecursive(Control namingContainer)     at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
=====
To me it seems SharePoint social networking features require the full SharePoint Server product AND are not available with the free SharePoint Foundation, If correct then why MS punching it here in Foundation without a friendly error message..
ja

Report for material with sloc,qty available, and production order

hi friends, i need advice on getting this report for material with qty and specific sloc with the corresponding Prodn order numbers. in mb51 i could get all these details except the prodn order no. could you advice me please?

to make sure you know how to do this.
In the material document list, hit "Ctrl+F8" on your keyboard.
A window will pop up. Click on the button position and look for "order" in the list of available fields. That should do it.
Rgds.

Looking for Help with Hyperion to JAVA

I am looking for help with connecting Hyperion to Java. We are in Maryland but would be willing to work out something for remote consulting. If you have experience with connecting web services, hyperion, and Java and would be interested in about 80 hours of consulting please contact me at:[email protected] x4846

Hi,
From your description, you want to achieve the following goal:
Configure Exchange to filter the attachments if the size is over 10 MB and store it in a public folder, and then forward the email to Salesforce.
Based on my knowledge, I'm afraid that it can't be achieved. Exchange can filter messages with attachments, but it couldn't store these attachments on public folder automatically. Also, I don't see any transport rule can do it.
Hope my clarification is helpful.
Best regards,
Amy Wang
TechNet Community Support

Looking for help with respect to configuring MS Exchange server to handle attachments over 10 MB for forwarding to Salesforce (Email-to-case).

Looking for help with respect to configuring MS Exchange server to handle attachments over 10 MB for forwarding to Salesforce (Email-to-case).
Problem - SFDC does not create cases from emails that have more than 10 MB of attachments. Our clients will not go-live if their clients cannot send in emails with attachments over 10 MBs
Potential resolution - Configure MS exchange to strip off the attachments(if over 10 MB) and store it in a public folder, forward the email to Salesforce (so the case gets created or the email
is associated to an existing case), the client should have some way to know if the attachments were stripped off and should be able to dlownload the attachments and continue with case resolution.
Any help is appreicated!
Thanks

Hi,
From your description, you want to achieve the following goal:
Configure Exchange to filter the attachments if the size is over 10 MB and store it in a public folder, and then forward the email to Salesforce.
Based on my knowledge, I'm afraid that it can't be achieved. Exchange can filter messages with attachments, but it couldn't store these attachments on public folder automatically. Also, I don't see any transport rule can do it.
Hope my clarification is helpful.
Best regards,
Amy Wang
TechNet Community Support

HT5731 How can I download my TV episodes to my Macbook Pro. I bought them from my iPad2, and I looked for them with the same AppleID on iTunes Store and they wont download to my iTunes.

How can I download my TV episodes to my Macbook Pro. I bought them from my iPad2, and I looked for them with the same AppleID on iTunes Store and they wont download to my iTunes.

What country are you in ? Depending upon what country that you are in then you might be able to redownload them on your Mac's iTunes via the Purchased link under Quicklinks on the iTunes store homepage
If you're not in a country where TV programmes can be redownloaded then connect the iPad to your Mac's iTunes and use the File > Devices > Transfer Purchases to copy them over from your iPad

HT204149 What is the maximum resolution available for use with the Apple Mini DisplayPort to Dual-Link DVI adapter?

What is the maximum resolution available for use with the Apple Mini DisplayPort to Dual-Link DVI adapter?

Hey guys,
I found out an answer by myself...
The missing link : the MacBook Pro needs to be powered... as in you need to plug the charger in...
In conclusion, you simply plug everything, turn on the MacBook Pro, close the lid, and there you go !

Restriction of GR & IR for PO with specific document type

Hi,
How we can restrict doing Goods Receipt & Invoice Receipt for a Purchase order, instead they do the payment directly for the Purchase order item in FI. We need to restrict GR & IR for PO with particular document type.
Regards,
Srinivas

Hi,
Yes i do feel the same. Normally if a PO is created means system expects a GR and and IR .If you do not expect the ir means it is a free entry.
But however you can control the GR / IR through account assignment .please check the account assignment definition at SPROMMPUR-Account assignment-AAcategory.
Once the PO is created with account assignment the procurement is for consumption (non stock)
if it is a stocked procurement system will check the GR/IR indicator in the PO.
When a PO is created in MM module and the cycle is not completed , it will always show as open PO.I think the context for FI direct posting will be differrant.
Regards,

Questions on setting up PeopleSoft FIN AP Business Unit for India with TDS

Hi,
Does anyone here have some advice for me on how to handle AP transactions for a business unit set up for India with TDS (withholding) and statutory reporting.
We are configuring AP BU for India in our existing database which has other BUs for other countries not using withholding. For India the way we understood on statutory is that all invoices must be recognised for withholding at the time of invoice entry or payment which ever ealiest. For PeopleSoft we always have to create voucher before we can make mayment so the earliest occurace will be at voucher entry that withholding should be deducted (at voucher post).
The problem that we are encountering is that if we have prepayment invoice, we can use prepaid voucher to record this. However, when we receive the final invouce and entered into PeopleSoft the voucher post reversed the original withholding lines and recreate in the final invoice with final invoice amount. This could be in different period. As for the India rule the way we understood this is that the entries that created at prepaid should not be reversed, also those withholding might already be paid to the goverment in prior period before receiving the final invoice. The final invoice should have withholding calculate just for the difference of the invoice balance.
Our other problem is on the statutory reporting that all transactions should be recorded in that particular period. Our current setup has AP close period at the end of each month which means we cannot enter invoices raised in previous period or have adjustments put in the period that already closed.
Any help and advice on how companies that has India AP business unit deal with the above mentioned issues are much appreciated.
Thank you.

Thanks Marc Sachdeva.
I don't mean where to set up withholding. I have alredy configured all withholding details and everything works fine in AP.
However, as India statutory comes in, I'd like to know how other companies handle cases like accounting entries for transactions in specific period if your system has AP/GL closed periods. Normal cases would be put entries in the next accounting period. But as my understanding on the Indian rules is that withholding must be recorded at the time of entering the invoice. So how should adjustment be made.
Another thing is the prepayment invoices, using PeopleSoft Prepaid voucher would cause the accounting entries for withholding lines to be reversed and then re-recorded when posting the final invoice (that matches with the prepaid). I would like to know how companies are dealing with such case as the TDS lines could be revsersed and recalculate in different accounting period. Also if the period that it revsered the TDS % could have changed and when the reverse happens it will recalculate withholding based on the new rate for the whole of invoice amt.
For example an invoice of 10000 INR, 50% is to be recorded and paid in advance so raise the invoice of 5000 INR in Feb. TDS is 10%.
- So vendor will be paid 4500 and 500 is for withholding.
- In April then receive final invoice of 10000 INR, record into PS as 10000 but matched to prepaid so the remaining invoice is 5000. withholding rate in Apr is now 15% so 15% should be applied to the remaining invoice of 5000 INR. As the prepaid voucher option reversed withholding lines and recalculate with final invoice total so the withholding to be deducted is calculated at 15% = 1500 (10000 * 15%).
- As the prepaid invoice withholding might have already been paid in March before the rate changed, the final invoice should have withholding of 750.
I'm not sure if my understanding of recording withholding for India is correct and whether it really needs to be recorded in the month that invoice is raised. As the way I understood and have been told it has to be recorded in that month. I.e. invoice received on 30 April must be entered into accounting period of April. Our business close AP/GL about a week before the end of month so if we receive invoice on 30th April but our AP/GL already closed on 25th Apr then 30th Apr invoice should go to May accounting period. As statutury requirement is to record this into April. How does anyone handle this?
Thanks.

For STO with billing how to take material in plant stock without cancelling excise duty

Hi,
Please suggest for STO with billing how to take material back in plant stock without cancelling excise duty.
Scenario is
Material transffered from manufacturing plant to depot,material is in transit now, but due to some reason material calls back to manufacturing plant.
Since the excise invoice is raised and material move out of factory client can not cancel excise invoice from legal point of view & client has to pay excise duty for the material movement.
Please suggest how to take back goods to manufacturing plant without cancelling excise invoice.
We have suggested client as there is no provision to take back goods to manufacturing plant without cancelling excise invoice
and to take back material to manufacturing plant stock they have to cancel excise invoice and other related documents.
But client is asking for another options.So requesting you to please suggest any alternative ways for same.
Thanks,
Amit

client can not cancel excise invoice from legal point of view & client has to pay excise duty for the material movement
I don't think, there is a statutory rule which says, manufacturer should not cancel the excise invoice generated on their Depot plant. Justification can very well be given to Excise authorities and hence, ask your client to follow the normal process by treating this as Depot returns.
G. Lakshmipathi

MMS for SNMP with eDir 8.8.2

Similar Messages

Maybe you are looking for