MMS issue with iPhone 4?

So luckily I have not had any of the issues that a lot of people seem to be having and I'm loving my new phone, but something happened last night and I'm not sure if it's an apple issue or an AT&T issue.
I took a picture and tried to send it via MMS to two friends of mine (that I MMS quite frequently).  Both of them received the following error message:  
"One or more of the message components have been deleted by MMS Adaptation. Either the message was too large or the components were unsuitable for your terminal."
I tried to resending several times but they keep getting that message.  One of them has an iPhone 3G and one a Blackberry of some sort.
Any ideas what may be going on?   

Last night was the first time I had attempted to send a picture via MMS on my new Iphone4. I took a picture with the phone and attempted to send it but kept getting a red exclamation point indicating failure. It would load to about 98% and then fail. I tried rebooting etc but nothing helped. This morning I did two things and finally got it to successfully send a picture.
1. I turned on location services for the camera
2. I cleared all history/cookies/cache (setting>safari>clear history/cookies/cache
I took a new picture with the iphone4 and sent it successfully. I turned off the location services for the camera and tried to send a previously failed picture and again it failed. I turned the location services back on for the camera and the previously failed picture went through successfully.
Either there is an intermittent problem causing the issue or the location services has to be "ON" for camera in order to send a picture via MMS. Give it a try and see what happens.

Similar Messages

  • Known MMS issue with iPhone 4?

    I recently upgraded my wife's phone from the original iPhone to the iPhone 4, however she cannot send MMS. Text messages work fine. I called AT&T and after about 40 minutes on the phone with them they didn't have an answer, they stated they reset the carrier settings and had me reset network and all settings. I restored the phone as new, and still nothing worked. The lovely folks at AT&T did give us a follow up call back on 12/27/10 stating the this is a known issue on Apple's end with people who have upgraded to iPhone 4 ios 4.2.1.
    So, do you know about this? Any suggestions?
    MMS is on, Data is on...

    Hello,
    I am in the same boat. On phone with AT&T for over an hour, transferred to tech. support. Mms on, reset settings, 3G and cellular on. I also upgraded from original iPhone to iPhone 4. Finally tech told me that it's because it shows I still have the original iPhone and that someone has to manually go in and change the setting. She couldn't do it, her supervisor did not have access. She said that ticket was issued and it can take up to 32 hours, it's been close to 48 hours and nada. She is suppose to call me back today. The only thing I did not try is to set up phone as new. The rep said that it's on AT&T's end.
    Please let me know if you get your wife's fixed.

  • I am having issue with iphone 5 bluetooth , not able to connect honda CRV

    I am having issue with iphone 5 bluetooth , not able to connect to my honda CRV

    Don't know if you could consider this an Apple issue. I know you are probably frustrated, and I am not defending Apple here, just saying that the iPhone does not update to support individual automobiles, the automobile manufactures update to support the Bluetooth profiles.The iPhone has the latest Bluetooth stack and supports a number of things. Problems generally revolve around the manufacturer not supporting the lastest Bluetooth version and have to update their systems. Check with Honda, they are probably aware of this, and if you search the forum, you will find a number of posts regarding the CR-V.

  • Is anyone having Mic issues with iPhone 5?

    Is anyone having Mic issues with iPhone 5? Speakerphone works but not the mic, on phone calls and memos.
    Took it to local Genius campus and after taking off the back screen and case, they blew air into the mica and it worked for about 20 mins.
    I can't have a ready can of air around every time the mic goes out.
    Anyone else had similar issues?

    I am having a similar problem. I had the iPhone 5 delivered yesterday. On most of the calls I tried, the person on the other end could hear me just fine on speakerphone, but not on the regular mic. It was garbled, or I would cut in and out. I could always hear the other person clearly.
    I just got back from a Genius Bar appointment where they gave me an entirely new phone. The issue exists on this one also, though now it seems like the audio is more muffled than garbled or spotty. Again, speakerphone works, and I can hear the other person clearly.
    I had originally restored backup from my 3GS, but before I went to the Genius Bar I restored to factory settings just to be sure it wasn't a software issue (it wasn't, apparently). I did not restore from the old phone for this new handset either.
    Thanks for any suggestions...frustrating, for sure!

  • Is there any issue with iphone 6 64gb storage?

    Is there any issue with iphone 6 64gb storage?

    Not sure why you would be led to believe that has anything to do with storage.
    Try a reset: Simultaneously hold down the Home and On buttons until the device shuts down. Ignore the off slider if it appears. Once shut down is complete, if it doesn't restart on it own, turn the device back on using the On button. In some cases it also helps to double click the Home button and close all apps BEFORE doing the reset.

  • HT4946 audio issue with iphone 4 with video recording

    audio issue with iphone 4 with video recording

    http://www.iphonebackupextractor.com/
    Basic troubleshooting steps.
    Check out the new remodeled MacOSG website! 24-hour Apple-related news & support.
     MacOSG: An Apple User Group  iTunes: MacOSG Podcast  Follow us on Twitter: MacOSG

  • I have lot of issues with iphone it ***** after spending so much money!!!

    I have lot of issues with the iPhone. First I cant forward the messages that people sent me, second you can't receive or send a picture mail directly from phone to phone, the sounds and the speaker is so low you can barely hear and has lot of static when you turn on the speaker phone, and you cannot connect to itunes store with the internet you have through AT & T it keeps asking you for Wi Fi and says cannot connect to itunes store, and you can't send address to other phones that really *****
    I mean these features are so simple any cheap phone can do it why not iphone they say it is so advance over the other phones. apple should really work on this. i think that is the reason people still prefer black berries or other phones. iphone is cool as they say it is but it is not that impressive at all if you can do basic features like these!!!!

    Did you do any research before buying your iphone?
    "First I cant forward the messages"
    Always been that way
    " you can't receive or send a picture mail directly from phone to phone"
    Yes you can. People can send an MMS to your e-mail address, instead of your phone number. You can e-mail a pic to their phone - they will receive as n MMS. Do a forum search as this has been explained thousands of times.
    "you cannot connect to itunes store with the internet you have through AT & T"
    It is called the itunes wi-fi store for that very reason.
    " you can't send address to other phone"
    Again, nothing new.
    Perhaps you should spend more time researching before you spend the money.
    If you are within the return window, take the iphone back to the store and get you money back - less restocking fee - consider it the cost of not researching.

  • Bluetooth buggy issues with iphone 5s after ios 8 upgrade

    I am having issues with my Handsfreelink in my 2013 Honda Pilot after the ios 8 upgrade.Basically, music works the phone does not. 
    What I have tried:
    1) Hard reset
    2) deleted and re-setup all bluetooth settings on both phone and car
    I suspect this is a bug in ios8 that needs to be addressed. On a sidenote I am also unable to plug my phone into the USB port on the car, now says unsupported.

    The same thing happened to me on my 2012 Subaru Outback.  I'm not sure this will help you since you have a Honda, but I'm posting this just in case.
    I paired the audio on my car with my iPhone 6.  However, when I turned the car off and back on again, the iPhone would not pair automatically.  I had to manually connect the iPhone with the car.  Turns out there are two separate bluetooth pairings on my car: one for phone which allows up to 5 devices and one for audio which allows only one device.  So I did the second bluetooth pairing for the phone (had already done the audio), and that fixed it.  YMMV

  • Issue with iPhone 5 (AT&T) when reconnecting to LTE.

    I recieved my iPhone 5 (on AT&T) a few days ago and have noted an issue with the LTE connection when you try to reconnect after loosing my signal.
    In the morning, for example, I will have a good LTE connection, then I go to work where the cell signal is fairly spotty, at best, in the building. I will notice my signal switch to Edge (not even 3G...but Edge, of all things). Then when I leave work the phone won't reconnect to LTE, even after toggling the LTE and cellular data on and off. It just sits on Edge and won't even load my email. I have to restart my phone to get a connection again.
    Has anyone else had this problem? I hope it's just a software issue that can be fixed with a future (hopefully a near future) update.
    (And don't go using the "AT&T is horrible" argument. I have a good number of friends would would say the same of Verizon. It's a weak argument...like playing the "race card" in a debate.)

    After talking to an Apple rep, I first tried reset teh network settings, but that didn't have any effect. Then I went and completely reset the phone to factory spec and restored the phone...which seems to have done the trick. Now I'm getting and holding a strong 4G connection in the stockroom that previously completely killed my signal.

  • Apple TV buffering issues with iPhone 4s and iPad 2

    Hi all,
    I just got me an Apple TV 2nd gen (yeah, I know, ordered 2 days before the presentation of the new one). So far so good, the device is up and running, connects just fine to my Airport Express router and all.
    However, if I try to stream a video from my iPad (2) or my iPhone (4S), the results are quite horriffic. The iPad videos would buffer for a very long time before they start and then quite fast after that the buffering problems restart. It's pretty impossible to play a video fluently of more than 20 seconds. If I'd try from my iPhone it's even worse with videos being 1080p, the thing just never plays, eventually the preloading process stops on the mirroring mode is cut.
    I have to point out, all my devices are in the same room (WiFi) so the signal is the best it can be.
    This is honestly quite surprising AND disappointing to be honest, given I bought the device mostly for that, so I can stream videos from my phone and pad.
    Tell me, am I doing something wrong, or the video streaming over those devices is just a marketing gimmick with nothing real behind it?
    Would it matter if I change my router from Airport express to Airport extreme?
    Thanks!

    I have the same issue with ATV3 and iPhone 4S. Everything works properly, no buffering issues when watching netflix, vimeo, youtube BUT when I try mirroring even a small 15sec iPhone movie it stutters and buffers and results to a choppy playback..same with larger mp4 files such as 1-1.5GB, buffers forever and never plays, I just re-encoded the same movie to 700MB and plays perfectly..
    Why Apple, why?..so close..I can accept the bigger movie files issue, but not being able to playback properly an iPhone movie is funny..I recorded a movie with lower bitrate through Filmic Pro (Economy mode, up to 16Mbps)
    and plays properly.
    Is there an upcoming software update going to solve the problem or is it hardware related and therefore not fixable.
    Please don't reply with a network related answer, by 2012 we know how to set up our networks and everything else runs flawlessly.
    I'll apreciate a fast answer, we love Apple, but if it can't play an iphone movie (or a high quality movie from iTunes) it's just not up to my standards.
    Thanks again.
    JP

  • Home Sharing issues with iPhone 6 Plus

    Hi guys,
    I'm having problems with streaming music and video on my iPhone 6 plus from my Macbook Pro (mid 2010 model) using iTunes' Home Sharing . I am able to stream without any issues using my iPhone 4S and my Apple TV, however.
    I am using iTunes version 12.0.1.26, iOS 8.1.2, and OSX 10.9.5.
    Using my 6 plus, I am able to connect to my iTunes library, both music and video. Album art shows up for music but no cover art for the videos. So, all in all, I am able to see the contents of my library.
    However, when I try to play songs, a couple things may happen. First, nothing plays for about 10 seconds; then a second or two of the song plays followed by silence again, appearing as if it's buffering. Second thing that may happen is that a second or two plays immediately followed by silence. If I press next to play the next song, what usually happens is that nothing plays, although the song title does appear.
    As seen in this video, I don't have any issues with my WIFI connection or internet speed, as demonstrated using the iPhone 4S and Apple TV.
    I have no clue as to why this is happening.
    Hopefully someone could shed some light with this issue. Please feel free to comment. I'm open to and appreciate any suggestions while Apple tries to find a solution. Thanks.

    UPDATE
    So, after working with the guys at Apple, they we were to provide a solution.  Now I have no problems using Home Sharing with my iPhone 6 Plus!!!
    (I should add that I have the Linksys Advanced Dual-Band N Router (E2500))
    The issue was fixed by giving one of the wi-fi channels a different name, thus splitting the channels into 2.4 GHz and 5 GHz.  Then, I connected my iPhone to one channel (2.4 GHz) and my MacBook Pro to the other channel (5GHz).  In this configuration, I have had no issues streaming my music and video.
    It seems that the problem is some kind of interference between both devices when using the same channel (i.e., when both the 2.4 GHz and 5 GHz channel share the same name).

  • Sync issues with iPhone 6 Plus and iTunes

    I'm having issues with syncing my iPhone and iTunes.
    I am running: Mavericks 10.9.3 | iTunes 11.4 | iOS 8.0.2
    Every time I try to sync my iPhone 6 Plus with iTunes, the sync process gets stuck on step 5 of 5 (waiting for changes to be applied).  The longest this has occurred for is 2hrs.  After this time I have stopped the sync and ejected my iPhone.
    I had another issue with my phone when playing music.  When going to play music, I was given the error message saying that the song could not be found.  I connected my iPhone to iTunes and went to the tab in summery page, 'on this iPhone'.  I found the song and could see that next to the song was a small what looked like dotted grey circle.  After Googling this, I found a video saying that if i was to remove all my music and then add it again, this should fix the problem with this song.  I did this and this was when the issue occurred again.
    I unticked the option to remove all music but the sync did not finish. So I cancelled the sync, ejected my iPhone and tried again.  This time, the summery page of my iPhone said there was no music on my iPhone and the 'on this iPhone'  tab, this all so said there was no music however, my music was still on my iPhone including the song that would not play.  All played ok.
    I have read lots in the Apple forums about lost of difference reason this may be happening.  Things like bugs in iOS 8, app updates being transferred during the sync process, the latest iTunes version has bugs and even a dodgy USB cable could cause it.  My iPod running iOS 5 syncs all ok but I get this problem as well on my iPad Air.
    I all so had this issue with my old iPhone 4S.  The problem occurred when running iOS 7 and 8 on the 4S.  When I had it on the 4S, I did a restore of the 4S 4 times and thought I had found the issue down too a dodgy app.  However, now that it has happened on my new iPhone and still not using that app, could this be an issue with my Mac/iTunes?
    I am in contact with Apple Care, but this is such a long process. 
    So if anybody could please offer any advice on this or steps to try to maybe solve the issue, it would be really helpful.   Or if anybody is experiencing the same problem, it would be good to know its not just my devices and Mac producing this sync problem.
    I will update my post with any information provided by Apple Care as and when I get it.
    Thanks for reading and thanks for your time.
    Mark. 

    Hi,
    Just wanted to updated my original post and give some more information on this issue that I'm having with my iOS devices running iOS 8.0.2 and iTunes 11.4.
    Firstly I just want to updated my details about what version of Mavericks I'm running.  I'm running 10.9.5 - I put the wrong version down in my original post.
    So over the last week, I have had a few phone calls with Apple Care an am dealing with a senior technical advisor about this issue.
    I have been given some instructions that I am currently working through to see if it solves the sync issue with iTunes and my iOS devices. 
    The Apple Care advisor has pointed out that a iTunes version issue with music that I have ripped to iTunes and the current iTunes version could be what is causing the problem.  For example, every song that I have purchased from iTunes since having an account, I was told are all exactly the same the same when it comes down the to data/information about that track/album that iTunes stores with the music but when it comes to music that I have added to iTunes myself from a CD,  this was added and encoded with the version of iTunes that was running at the time of adding the music.  So going through all the music that I added to iTunes over the last 10 years, you can imaging that there was lots of mixed version of iTunes linked to lots of different music.
    At the moment, I'm having to go through all my music and find any that I have added and create a new ACC version of that music and delete the old version.  However, due to the amount of music that I have, this is going to take a long time.  When I was on the phone to the Apple Care advisor, we did several albums as a test and they all synced over to my iPhone.  This may just have been luck though at that time.
    Now, I'm not saying that this will solve the problem that I have with the sync issue but I am going to try it and see how I get on.  The only down side to this fix as far as I can see at the moment, is  that when it's all done, I think I will have to fully restore all my iOS devices to get music on to them.
    I will of course updated this topic when I have got through all my music and tried to sync my iOS devices.
    Thank you all for your comments.

  • 8.1 did not fix Bluetooth issue with iPhone 5 and car

    8.1 didn't fix my issue with Bluetooth. I can receive calls and play music thru my Mazda CX-9 but I cannot make outgoing calls. My daughter has same issue with her iPhone 5 in her car so it has to be glitch with Apple yet. Please help. I'm so totally frustrated and I'm not eligible for iPhone 6 until January.

    I found there is another contact group list as part of the Bluetooth sync menu; altering that took care of the issue.
    This is a non-issue.

  • Sync Issue with iPhone Contacts and Entourage Contacts

    Curious, when I update my contacts from my iPhone 3G I would expect both Entourage Contacts and my MacBook Pro address book to eventually become fully sync'd.
    This is not the case...for example I have added a photo to one contact numerous times and it does eventually update my address book contact but at some point this photo is removed. I have sync services enabled in both Entourage and System Preferences but can't figure out where the conflict exists. I have a suspicion that it is Entourage since this - as of yet - has no idea what a MobileMe cloud is.
    Any thoughts?
    Thanks!

    I am having some of the same issues and I think you are right about Entourage. Here is what I did for a temporary fix. I did a export, address archive from my address book, then I imported it back into my address book, overwriting my address in my address book, I now have 217 contacts in both my address book and iPhone. Apple has some issues with syncing and they need to get this fixed.

  • Ical syncing issues with iphone/imac after lion OS update.

    Hi All,
    I upgraded to lion and now have two issues with syncing my iphone and ipad to my imac.
    First issue is that calander entries created on the iphone/ipad do not appear in the imac calander after syncing.
    Second issue is that if I change an calander entry on my imac, the old entry and the new entry will show up on my iphone.  For example. I created an event and accidently clicked out of it before changing the name.  I then reopened that entry and changed the name and date. In my imac ical calender I only had one entry at the final date with the correct name.  When I synced my iphone and ipad however two events showed up on the iphone and ipad. The original "new event", and the event with the correct name and date.
    The same thing happened when I had the same event occuring for 5 days,  I manual copied the one event five times on the one day and then dragged them to the correct days in ical on my imac.  When I synced my iphone I had both the 5 entries on the one day, as well as the entries on the days I had dragged them to.
    In summary, now when I look at my calander in ical on my imac it looks great, but on my iphone it has all these extra entries. It is as though when it syncs it shows me all of my previous entries and changes, instead of the actual current calander.
    Any thoughts how I can get the imac and iphone icals to look the same?
    and in case you were wondering, I dont use Icloud.  I did set it up and turned it off after the duplicate entry problem that everyone has mentioned.  I dont have that duplicate entry issue anymore.
    Thanks
    Adrian

    From what your write, it is a little hard to tell, what exactly your problem is, though you may want to try the following, which helped me at time:
    step one:
    export all of your calendars one by one, including the one with entries giving you problems
    step two:
    erase all of your calendars and create a dummy character, check if syncing works with that one.
    reimport the previously exported calendars one by one, redoing the syncing routines.
    In the instances I had problems, I found that exporting and reimporting a calendar file usually did away with the problem
    Also, at least on my machines, turning on the birthday link to address book, created some problems, so you might want to try without that feature too.
    If you got everything working on one machine, another strategy can be to reinitiate syncing from that one, i.e. erase and reinstall the syncing process on the others. Just make sure you have an up to date back up of your entries.
    Dirk

Maybe you are looking for

  • Return channel in MHP

    Hello, I've connected a modem in my set-top-box and I want to connect the modem of my set-top-box with the modem of my computer. It's like communicating two computers (each with a modem) with a "hyperterminal". I think you know what I'm talking about

  • ALV Object Model - Merged Cells

    Hi all    When utilizing ALV Object Model, how do I display cells as merged when they have the same content?    Can someone help me out?    Thank you very much!

  • Using the same action sequence with multiple buttons and exclusive conditional interactions

    Hi all, first of all, pardon me for my english and if I post questions already answered, but I can't find anything about that. I'm new to flash and I decided to use Flash Catalyst to speed up the building process of a multimedia presentation for univ

  • Sky Planner and Scheduled tab

    I've had problems with "losing" programmes that I have set up to record on a weekly basis before. I tend to record a few regular weekly series and watch them in blocks when I'm in the mood. Occasionally I notice that a series has just stopped recordi

  • ORACLE EQUVALENT OF "EVALUATE" FUNCTION OF FOXPRO? or any other solution

    I have a string (varchar2) holding the following '39 + (25 /3) - 200' ,which is a argument to a function returning the value (numeric) of the expression contained in the string. for eg. Declare varstr varchar2(2000) := '10 + (75/3)*10'; value number;