MMS Messaging.. can it be done?

Take a picture and want to send it via MMS to another phone??? I have not found a way to do it.. It sends it thru my email account, and then comes back with an error. I am trying to send it to another AT%T phone. email address I put in per the AT&T rep is [email protected]
Any suggestions?

Try one of these
http://discussions.apple.com/thread.jspa?messageID=4914435&#4914435

Similar Messages

  • MMS message can not be sent or received until data connection is restored.

    Error:  MMS message can not be sent or received until data connection is restored?     Droid X wont send or receive pictures.

    I had this same issue.  I downloaded APN Settings Shortcut from the play store and it worked for a day then it stopped again.  The solution is easier than that... download the Verizon Messages app... bingo - NO more issues...

  • My group MMS messages can't be received, only sent?

    How do i fix this? I was able to receive and send earlier but now I can't, I can receive regular texts and iMessages fine but not getting any MMS and i know that there are messages being sent to me. Someone else in the group chat says that they receive my messages and respond but obviously I'm not getting any. I've restored my phone, restarted it, turned on/off group text, imessage, cellular data but nothing works

    I realize the need to stay connected with your son. I just have a few questions so that I can further assess the situation.
    Are you able to send him a text message from an email address?
    Do you get the error message right away or does it take some time to send first?
    Do you have usage controls or any other restrictions on his line.
    Lastly, can you send a message to another number? 

  • Is it possible to send an MMS message?

    I don't know if its just me but i cant see any way of sending a picture message. Can it be done if so how?
    All I can see is a way of sending the picture as an email.
    Any help would be appreciated.
    Also for some reason my iphones ringing volume keep turning itself down and it always goes to the same volume, almost off. It happens intermittently is there a reason for this?

    MMS messages can be sent through you email setup. MMS messages can not be sent like an SMS.
    There is not any information as to if/when it will be added. You can send feedback to Apple with a request to add it. You will not be the only one to do this (I have done this as well).

  • Saving Recived MMS Message

    Hello every boday,
    I would like to know how mms message can be saved once received. Do I have to save every part in a separate file or is there a way to save the mms message and one whole mms file??
    can anybody help me?
    yours
    jimale
    Edited by: jimcaale on Jun 15, 2008 11:38 PM

    Well, I wouldn't dare to call you an idiot
    If you open iTunes and directly afterwards close it again you wouldn't expect to "save" your library 'cause nothing has changed. But even if you import, rename etc., all actions are completed instantly. It would be "bad" programming to occupy system resource for such a long time after exiting a program...
    I agree with you, that it is not a real error message. Probably iTunes way to say, that it can't close because there is still some action going on in the iTunes folder (bij the antivirus program).
    Anyway, I had this message too and only after I excluded the folder from my antivirus program it was gone.

  • Can't retrieve content when someone sends me an MMS message

    Hi folks
    I can't seem to retrieve content from MMS messages when they are sent to me. All the settings are there as far as I know and it's also set to automatically retrieve them but it won't seem to work. 
    I have a Curve 3G 9300 Smartphone and am on O2. It's a pay as you go but have a data plan and can use the internet and email with no problems whatsoever. 
    Any suggestions? 

    Well I don't know if it works the same way in the US but here in the UK we have to ask O2 to turn off MMS on our contracts. It should be set up that way by default but is sometimes not. When that is done you get the text asking you to go to the web site to view and including the pin number needed.

  • Is there any way that a normal SMS message (i.e. A green message) can be sent through to an iPad? I have linked my iPad to my phone but I don't want certain messages getting through. If I turn my imessenger off, does this mean these won't go to my ipad?

    Is there any way that a normal SMS message (i.e. A green message) can be sent through to an iPad? I have linked my iPad to my phone but I don't want certain messages getting through. If I turn my imessenger off, does this mean these won't go to my ipad?

    SMS is a voice cell service and since the iPad does not have voice cell circuitry, it does not natively support SMS or MMS. There are third-party apps in the iTunes Store that purport to send SMS, but I have no personal experience with any of them.
    If I turn my imessenger off, does this mean these won't go to my ipad?
    If you disable Messages in the Restrictions on the iPad, then it will not be able to send nor receive messages. Or you can change the email address used for Messages on either the iPad or the iPhone. The iPad will then only receive messages sent via that address.
    For more information, see:
    http://support.apple.com/kb/HT3529
    Regards.

  • I don't have a 3G so i use Sms/Mms messaging when i have wifi. My co'iphone users receive my text messages but i cant receive theirs because it sends as an imessage. HELP thanks

    I Don't have a 3G on my iphone 4. So when i dont have a wifi, i send text through SMS/MMS messaging. I can receive and send SMS/MMS messages to non iphone users. I can also send the same messages to my co iphone users but i cant receive theirs because it sends as imessage. someone help me pls. Thnks

    The only way to get around that, since you do not have a data plan, is to completely disable iMessage. While you can turn on the switch for Send As SMS on, which could send your messages as SMS when not connected to Wi-Fi and data is not turned on, it could also find your messages lost in the server and never delivered. Also, anyone sending to you would have to be set up the same way. You can check out this support document for deactivating iMessage. iOS: Deactivating iMessage
    iMessage requires an active data connection for both the sender and receiver to work properly.

  • I AM TRYING TO FORWARD TX MESSAGES TO MY COMPUTER, CAN THIS BE DONE?

    I AM TRYING TO FORWARD TX MESSAGES TO MY COMPUTER, CAN THIS BE DONE?

    You should be able to forward them to your e-mail, or you could use a text backup app from Google Play that will backup your texts and e-mail them to you (SMS Backup and Restore is an example).

  • I am trying to pair my cell phone and tablet using Messages   App,  but only MMS messages will come through on my tablet.   I've tried pairing and unpaired,  reinstalling app on my tablet,  and can't figure it out.   Any idea how to fix this?

    I am trying to pair my cell phone and tablet using Messages   App,  but only MMS messages will come through on my tablet.   I've tried pairing and unpaired,  reinstalling app on my tablet,  and can't figure it out.   Any idea how to fix this?
    Thanks

    I Shared my most ridiculous situation but didn t log under your problem.
    sorry, I gave you your answer under sunshine99 or Dianna. I want out and you want in.
    if you not find just email me at [removed]
    thanks
    Personal information removed as required by the Verizon Wireless Terms of Service
    Message was edited by: Admin Moderator

  • HT201250 i'm getting message: can't be opened because you don't have permission to see its contents. and he operation can't be completed because an unexpected error occurred (error code -8003).

    I took my computer in to have the Backup restored onto my computer after having a new harddrive put onto my 1year 1/2 old MacBook Pro. When i got it home there was a new User that i had to logout of to getting into my normal user. Don't know why this was, just figured the Mac guys that installed my backup did this for some odd reason. Today i could not open any of my files in the backup on the time machine. All the folder had line going thought them and when i clicked on them I revieved this message: can’t be opened because you don’t have permission to see its contents. After talking with that same mac store. I decided to just delete all the files out of the time machine as it was just put back on my computer and i have everything i need. Hours later when i tried to empty the trash i got this messsage: the operation can’t be completed because an unexpected error occurred (error code -8003).
    Any advise how to fix my problem?
    thanks in advance

    While you see a single trash can, in reality there are trash folders on each mounted volume.  I don't use TM but what you are describing implies that a TM drive is no different with the way trash is treated.  So when the TM is unmounted the trash folder on there is gone and thus the trash looks empty.  Remount the drive, the trash folder on it now causes the trashcan to look like something is in it.
    If TrashIt! could not remove the file, I'm sorry, you will need to use the terminal.  We can do this one step at a time so you only have to copy/paste the lines into terminal (except the first time).  So launch Terminal (in utilities).  You might want to make the window that is shown a bit larger with the grow box since it's pretty small.
    This first line is the only exception to the copy/pasting since you have to enter some information.
    sudo ls -laR /Volumes/your-TM-volume-name/.Trashes
    where your-TM-volume-name is the name of your TM volume.  That's the part you have to fill in since I don't know it.
    When you hit return the sudo in that command will cause a prompt for your admin password.  Enter it and hit return again.  Note the password will not be shown as you type it.  Post the results so I can tell you what to do next.
    Note this ls command is not doing anything but listing the files in the TM's .Trashes folder.  Remember I said each drive has it's own trash folder.  .Trashes is it.

  • I downloaded an album and one single song just fine and then bought a second song and I keep getting an error message that says, You don't have enough access priviledges.  What can I do to download this song?

    I downloaded an album and one single that I purchased just fine and then purchases another single and I keep getting an error message that says, You don't have enough access priviledges.  What can I do to get this song?  I am just going to have to ask for a refund and forget it?

    What version of iPhoto do you have installed?  Is if one of the versions shown as not compatible in this screenshot?
    If it is then go to the App Store and download iPhoto 9.5.  It will be free if you have an iPhoto 9 or later verson currently.
    OT

  • Since my update to 4.4.4 I can no longer send or receive MMS messages.  What gives?????

    Since the latest update to 4.4.4 I can no longer send or receive MMS messages.  What gives????

        DrEvey,
    Let's get your MMS messages sending and receiving again!  Are you receiving an error message? Has this been occuring everywhere? Is your cellular data turned on? Please share some details so we can further assist.
    TrevorC_VZW
    Follow us on Twitter @VZWSupport

  • Can't install itunes on windows 7 machine. I keep getting A message stating that I don't meet min. requirements, but the machine has more than enough. What do I need to do to correct this?

    Can't install itunes on windows 7 machine. I keep getting A message stating that I don't meet min. requirements, but the machine has more than enough. What do I need to do to correct this?

    Are you trying to install the 32-bit version on a 64-bit machine, or vice versa?
    For general advice see Troubleshooting issues with iTunes for Windows updates.
    The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
    The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert an older version or want to try the iTunes for Windows (64-bit - for older video cards) release as a workaround for performance issues or compatibility with third party software.
    Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
    tt2

  • HT1222 I can't send photos to my friend it says "Not Delivered" my MMS Messaging is on , my Cecullar data is on , i reset the network settings and still my photo did'nt sent.

    I can't send photos to my friend it says "Not Delivered" my MMS Messaging is on , my Cecullar data is on , i reset the network settings and still my photo did'nt sent.

    It is peculiar, that Chrome, Safari, and Skype can access FB, but not the iPhoto uploader.
    Do you see any error messages/ diagnostics in the Console Window, when you try to connect to Facebook?
    Launch a Console window from Applications > Utilities and clear the Console Window. Then try to upload. Are there any new messages?
    And also launch a Terminal and have a look, if "facebook.com" is properly resolved:
    Type 
    ping facebook.com
    into the window. Do you see any transmissions? What is the IP address used?
    I see:
    PING facebook.com (173.252.110.27): 56 data bytes
    64 bytes from 173.252.110.27: icmp_seq=0 ttl=243 time=110.486 ms
    64 bytes from 173.252.110.27: icmp_seq=1 ttl=243 time=109.365 ms
    64 bytes from 173.252.110.27: icmp_seq=2 ttl=243 time=110.101 ms
    64 bytes from 173.252.110.27: icmp_seq=3 ttl=242 time=109.829 ms
    64 bytes from 173.252.110.27: icmp_seq=4 ttl=242 time=111.323 ms
    64 bytes from 173.252.110.27: icmp_seq=5 ttl=242 time=110.346 ms
    64 bytes from 173.252.110.27: icmp_seq=6 ttl=242 time=110.708 ms
    64 bytes from 173.252.110.27: icmp_seq=7 ttl=242 time=112.685 ms
    64 bytes from 173.252.110.27: icmp_seq=8 ttl=243 time=124.256 ms
    64 bytes from 173.252.110.27: icmp_seq=9 ttl=243 time=112.106 ms
    ^C
    --- facebook.com ping statistics ---
    10 packets transmitted, 10 packets received, 0.0% packet loss
    round-trip min/avg/max/stddev = 109.365/112.120/124.256/4.159 ms
    Try the same with "dig":
    dig facebook.com
    ; <<>> DiG 9.8.3-P1 <<>> facebook.com
    ;; global options: +cmd
    ;; Got answer:
    ;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 25051
    ;; flags: qr rd ra; QUERY: 1, ANSWER: 1, AUTHORITY: 0, ADDITIONAL: 0
    ;; QUESTION SECTION:
    ;facebook.com.                              IN          A
    ;; ANSWER SECTION:
    facebook.com.                    775          IN          A 173.252.110.27
    ;; Query time: 11 msec
    can you "ping" facebook?

  • Can't open an mms message

    Can't open an mms message sent to me.  get message 333 go to my album to open using password and username

    that is a carrier error, from your phone service provider.
    I would recommend you call them.
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

Maybe you are looking for

  • How can I delete my itunes account and create a new one ?

    Hi Everyone I've got a problem with my current account itunes (french) : I'm between France and Spain. I usaully use french applications but I would like to be able to pick some apps in the spanish itunes store, and in the english one (such as i alre

  • Premiere Pro CS4 Crashes every time I toggle to another application

    Dell Latitude D630 laptop w/Windows 7 Ultimate 32 bit. Running Production Premium CS4. PPro runs great except that any time I click out of it, even for the simplest function, like adjusting volume from the taskbar, PPro crashes. I previously ran CS3

  • Relevance of field BE_PO_PRICE of table BBP_PDBEI

    Hi Forum, While calling the BAPI_REQUISITION_CREATE , the field BE_PO_PRICE of  ITEM table is getting passed with value 1. Because of this in R/3 in the PR under Valuation tab , a field appears with name PO_PRICE and some value is selected in dropdow

  • Time compression

    Im trying to time compress an audio clip to be exactly 30 seconds. I''ve tried the time machine which does not let me enter an exact time & when I hit process I get an error that says "file with specified name & version number already exists" I also

  • Reporting Exits in BW

    Hi all ,      I am new to writing customer exits in BW reporting.      so need your help.      There is a tcode RRMX which is a query designer.      i have a characteristic value variable day interval      (&0I_DAYIN&) after executing it will ask for