MMS settings missing

I'm using my iPhone 3GS with Orange Austria where MMS should work. The problem is, it doesn't.
When I try to send a MMS the status bar goes up to about 90%, then stops and after some time I get an error message that it couldn"t send the MMS.
The solutions I found were all talking about entering the right network operator settings under Settings - General - Network - Cellular Data.
The problem I have is that the menu entry Cellular Data is missing on my phone.
Any ideas?

I went to the Orange store and asked for a new iPhone. They said they could send it in which would take about two weeks (probably tryed to alienate me). Only when I agreed they started to look at the phone.
They tried some time to send an MMS and suddenly it worked
The explanation was that the Orange servers need some time to recognice my phone sending MMS and that it takes up to 10 attempts to send the first MMS successfully.
Well done Orange!

Similar Messages

  • NOKIA 2220 cant accept MMS settings sent by servic...

    hi, i have been using my Nokia 2220 since May 2010, but until now, i cant send or receive MMS. My service provider had sent MMS settings several times but my phone keeps on rejecting them with an error message that says like only 20 files can be received etc...
    Another problem with my phone is the sms display time is incorrect. I have already set the correct time and date and i got to display them on the screen, but whenever i receive a text message or i send a text message, the time sent or received is not the same as what is displayed on the screen. I need help, pls! thanks

    The same settings configuration that works for the old Nokia models should work for the new 6700c as well.
    If you know the details of the settings for your operator (could be found from operators web page) you could try to create the settings by yourself, Menu->Settings->Configuration->Personal Config Sett. and then add and multimedia msg. Hope it helps.

  • MMS settings in Europe

    If you have an iPhone 3G and are looking how to set MMS for you phone, it could be usefull go to help.benm.at using Safari on the iPhone. Than tap on Mobileconfigs, choose your country and company. Settings will be done automatically.

    Vangelis290189 wrote:
    there is no problem guys . The MMS settings are "hidden" somewhere in the messaging settings . I cannot guide you step by step cause my C7 is on vacation to NOKIA care islands !!!
    av8rboi wrote:
    post no.3 by jimmy ireland is totally correct. Try the steps.
    Of course there is a problem. MMS settings entries appear and can be selected inside the messaging settings but from there they can't be deleted or edited no matter how long you tap and hold on to them.
    Anyway the nokia care shop acknowledged the problem and now the phone is in for repair...

  • Mms settings from ATT on nokia 300

    I am unable to send or receive MMS on my Nokia 300 through ATT in the U.S. does anyone have the configuration info for this? Thanks

    Hi pbnok,
    Thanks for your first message on the forums.
    Just a few questions on your device, did you buy phone in the U.S? 
    Also have you tried contacting your network provider in order for you to recieve your mms settings? Normally once you put in your new sim card it should automatically add these settings for you. So if this hasn't happend then in this instance I would try to contact AT&T for them to send you these settings. 
    Also have you checked to make sure the message centre number is correct? 
    For the AT&T network it should be  +13123149810 but also have a look at the below link:
    http://www.wireless.att.com/support_static_files/KB/KB38686.html
    Let me know if any of this helps.
    Regards
    Raoul_Duke
    If you find this post helpful, a click upon the white star at bottom would always be appreciated.
    If it also solves your problem, clicking ACCEPT AS SOLUTION below it will benefit other users!

  • Nokia Lumia 920 internet and MMS settings

    For the Lumia 920 our local cellular company(Du UAE) is not able to provide Internet, MMS settings. Nokia has launched this device exclusively with Du(UAE). Can you please help in this regard. How we can configure our handset to use all features in it. Local Nokia care is not responding to this questions.
    Thanks,
    Nodirbek
    Moderator's notes: Post moved to own thread.

    The Lumia 920 is designed to extract network information from the sim card if the information is on the sim. Sounds like their sim may not contaiun this information. If this is the case, you can manually set it up. We won't have the settings for your network so they will have t o give you that. Once you have the settings, goto Settings>Accesspoint>Add, and just fill in the boxes with the information provided by your network. This list will also tell you what information you need. Would be an idea to have this page open when you ring your network. 

  • Lumia 900 MMS Settings (Where is Network Pofile Ap...

    I have an unlocked (By Rogers Canada) Lumia 900 that I purchased outright as I travel a lot and it's nice to be able to insert a SIM card locally to the location I'm currently in. I'm using it mainly on Fido (Rogers owned carrier). Everything works great except MMS.
    I know for whatever strange reason WP7 doesn't have a Settings option to manually configure MMS settings. I read that Nokia had released a Network Profile App but I don't see it in the Lumia section of the Market. Read a couple of comments on the web that the app was removed. Why was it removed? This is something that should have been preinstalled!
    Is Nokia releasing a Network Profile App for the Lumia 900?
    Also read frustration from some people who indicated that the app has to have the provider listed to configure the MMS Settings.
    It's really easy, all you need is an MMS Configuration app that allows a user to manually enter their own carrier settings!

    Kosh wrote:
    Lumia 900 models which are currently available in the US and CAN region either come with MMS settings pre-installed or should get these from the SIM when going through the Device First Usage (DFU) procedure. For this reason the Network Setup app is not available in these regions for the Lumia 900.
    Kosh here is OUR problem with this and you need to go back to the people who gave you this information and inform them of this so they understand.
    There are two carriers that carry the Lumia 900 in North America, AT&T in the US and Rogers in Canada. Both carry the handset branded to their respective company and while each company likes to "lock" users into contracts to subsidize handsets, both of these companies allow users to purchase the Lumia 900 outright. As long as one is not in a contract to subsidize the handset, both (AT&T and ROGERS) CAN AND WILL provide their customer with an UNLOCK code. This is something they started doing recently, probably to keep the respective regulatory bodies in each country from forcing new policies on them. Whatever the reason, people like myself who purchased the handset outright and RECEIVED an unlock code do so because we want ot own the handset. We may travel and purchase sim cards in the countries we travel too. We may have multiple services and have the option of using the handset with any of those services or we may simply (as much as the carrier hates it) opt to switch carriers in the future.
    It's not really practical for us to be resetting our phones to configure it for a new SIM card and the information you provided doesn't work anyways. I've tried it. With this said, the Lumia 800 sold by Telus in Canada allows you to configure the MMS settings through the Diagnostic app. The Lumia 900 does not and we need to do it in these cases.
    Please provide whoever gave you this answer with the information in this reply. Unfortunately Nokia does not (they should) sell unbranded handsets directly to consumers in North America. And for whatever strange reason, Microsoft forgot to include the option to configure MMS settings in the OS like they do with data APN. Given the fact that both AT&T and ROGERS WILL PROVIDE CUSTOMERS WITH UNLOCK CODES, there is no reason why Nokia shouldn't allow the Network Setup App to be available in the North American marketplaces. I'm sure Nokia and these two companies would rather have it there then having customers like myself going to the FCC/CRTC to petition new policies against their respective carriers.
    Please pass this information along as many of us need to configure MMS settings either through the NETWORK SETUP app or the Diagnostic App. We don't care as long as we can when we need to do so!

  • Nokia (maybe all s40v2) Wap,MMS settings a MESS

    Whats with the WAP,MMS settings on these phones? God, iv had phones for years but this new system is a killer... I went to 5 club nokias and NO ONE can find out how i can manually inser the settings... I have tried 1000 ways and still cant make it work... How is this possible? SMS with settings from the provider wont be recognized by the phone, and still manually you cant make throuh it..
    Is there anyone here from nokia or someone that knows what i can do?
    Thanks

    try these one go to Menu- Control panel- Settings- look for Destination or Access point then you can check your connections for internet, mms,etc. i dont know if were the same options or settings coz im using E52 just try it.
    NOKIA E52-1
    034.001
    RM-469

  • Nokia 2220, mms settings

    Hi,
    Probably a stupid question but I don't manage to find an accurate answer in the FAQs
    How to enter MMS settings on nokia 2220?
    Regards,
    surasuri

    Its not necessary to enter them manually, instead contact your operator and ask them to send you MMS settings, once received configuration SMS, open it, go to Options>save>it'll ask if to set them as defaults>select "Yes" and thats it. now try to send MMS.
    Good Luck.
    Previous Phones: 6600, 7610, 6230, 6230i, 1100, 1112, N70, N73, N95, N95 8GB, 5800XM, 5230, C5, iPhone 3GS, SE Xperia X10, N900, N8, SE Xperia Arc
    Current Phones: Nokia N9, iPhone 4

  • T-Mobile USA MMS Settings?

    Since the C7 is now offered, is there a chance that the MMS settings might get fixed for us N8 owners?

    Well, don't know, but for while why don't try this http://www.howardforums.com/showthread.php/1679362-T-Mobile-N8-customers-YaPN-mod-works-%28Large-MMS...

  • IPhone 4 MMS settings?

    I currently have a factory unlocked iPhone, and am having a hard time configuring the MMS settings. I know I have to manually enter the setting (which I have), however I am unable to find out where to imput the MMS settings. It is somewhere within the phone, or does it require the iPhone Config tool like changing the APN settings.
    Anyone have any idea?

    Settings > Messages > MMS Messaging > ON
    Note that this setting may not appear if your carrier doesn't support MMS or you're using a carrier that doesn't officially support iPhones (no carrier config file).
    The [User Guide|http://manuals.info.apple.com/enUS/iPhone_iOS4_UserGuide.pdf] is your friend.
    Message was edited by: modular747

  • Vodafone mms settings anyone?

    i have an unlocked 3g on vodafone and cant get any settings to work. i live in cyprus but maybe uk or any other country settings would work. i remember i got the 3g working with settings from another country..
    Anyone that could kindly provide us with workins mms settings for voda?
    thanks

    Dude. You're a legend. Thankyou.
    I was midway through writing a tirade about Vodafone, no visual voicemail, tethering or MMS and their price gouging plans. And then you showed me the light.
    thanks

  • How to delete mms settings nokia C6-01

    How to delete mms settings nokia C6-01

    Don't have a comparable model with Symbian at hand, but see
    Menu > Settings
    Connectivity > Settings
    In "Destinations" you should be able to remove/delete the MMS access point.

  • Nokia N96 MMS Settings Help

    Hi, My friend sent me a mms message but i cannot recieve it, says i need to define an access point first.
    Could someone help me through the settings cos i cant find much, found the option to add access point for mms, but all that came up was a wireless connection, or an option for packet data.
    Im on 3 if that helps
    Cheers
    Ross
    Solved!
    Go to Solution.

    '3' but where in the world ('3', Hutchison 3G, has/operates networks in many countries, and the settings would be different for each country).
    In any case, you can probably have the appropriate MMS settings sent to you as an SMS from '3' if you call their customer service. You may be able to order the settings from their web site, too.
    Or you can go through http://www.nokia.com/support as Nokia has at least in the past had a web page where you can order the settings to be sent for several phone models/operators.
    And if you have a phone with the "Settings Wizard" application on the phone, you can try running it to get the settings that way, too.

  • Plug-in settings missing after basic install

    ive just done a fresh install of logic 7.2 + updates to 7.2.3
    i didn't install any of the sound files or content on the disc. i just noticed that all the plugin settings are missing. anyone know where to install them? are they in with the sound files on disc 1 somewhere?
    i dont want to install all the bonus content i just want the plugin settings.

    Ian Cashman wrote:
    ive just done a fresh install of logic 7.2 + updates to 7.2.3
    i didn't install any of the sound files or content on the disc. i just noticed that all the plugin settings are missing. anyone know where to install them? are they in with the sound files on disc 1 somewhere?
    i dont want to install all the bonus content i just want the plugin settings.
    You can open the contents packages of said DVDs and find the settings by hand.
    Also, they might be installed somewhere else. Did you look in both your main Library and your User Library Suuport folders?
    Cheers

  • Power settings missing after clean install of Windows 8.1 on Helix

    After a smooth clean installation of Windows 8.1 and loading all the Lenovo drivers, software, and apps, the system runs extremely well except in the Lenovo Settings Metro App, I no longer see the option of battery life protection (to charge only up to 50%). In addition, in the Windows power settings, there are only four power profiles: high performance, balances, power saver, and fly mode.  I do have Lenovo Power Management Driver and Settings Dependency Packages installed.  Lenovo's System Update does not show any missing installations. I wonder if anyone can give me some clues. Thanks.
    Solved!
    Go to Solution.

    someotherguy wrote:
    The battery health mode setting was removed.  We don't support this setting anymore.
    The preload comes with a couple additional power profiles that we don't make available except in the preload.  However they are not anything special.  You can create your own power profile(s) in the Power control panel to do whatever you want them to do - idle timers, CPU speed, etc.
    I accepted the answer as a solution, but I frankly think the battery health mode is very important to have.
    My T400s, with both the main and ultra-bay batteries, started with about 6:30 hours of battery life (of course, under my typical work load). 4 years later as today, it still has about 4:30 hours. If I kill some processes and use IE instead of Chrome, I can get 5 hours. I think the long battery lifes have been a consequence of the setting of no start of charging until below 85%.
    To replace either battery in Helix, a lot of effort is needed. I think it makes a lot of sense to keep them health.

Maybe you are looking for

  • How do I prevent unwanted website/browser actions?

    Since a year or so, I notice a lot more unwanted things happening with my browser while I am surfing the net. For instance: -websites changing their address while keeping the appearance of a previous page. They then lead to other content usually. -we

  • Getting error message... Need help now..

    I was using my powerbook g3 and all of a sudden i get a message pop up on the screen. It says: you need to restart your computer. Hold down the power button for several seconds or press the restart button. I held down the power button for several sec

  • WM: Confirming TOs in Mobile Data Entry

    Hello, I am having a business requirement where transfer order should be confirmed with alternative unit of measure instead of base unit of measure. This can be done nicely in LT12, but we want to use Mobile Data Entry. In transaction LM06 I can't fi

  • Jdeveloper - GUI not visible in the visual design editor

    Hello everybody! Actually I'm designing a Java Desktop Application with javax.swing. using JDeveloper 11g Release 1 (Studio Edition Version 11.1.1.3.0, Build JDEVADF_11.1.1.3.PS2_GENERIC_100408.2356.5660), Java Platform 1.6.0_18 and Oracle IDE 11.1.1

  • Form 24

    Hello , I have querry regarding Form 24. TXC pc00_m40_f24 after this txc on selection screen "User parameter"there are two emplyer types Goverment and Other. When I m selecting Employer type"Other", then in form outprint it is showing me deductor nam