MMS with SMIL part Display problems
Hi, A freind of me has just bought a new Nokia 6700 Classic
The problem is when he recieve an MMS with the SMIL presentation File, he has "can't display the SMIL part" !!!
Do you have any idea about this problem ?
Txs
Just an FYI / update to this unresolved issue. I tried re-scanning the pictures and the new scans behave normally. I think what happened was that I rotated the pictures to make them upright when examining the 'event' as a whole; then somehow the program lost the rotation information (though I don't remember a crash I did have a couple during the long process); so when I tried to go from thumbnail to full size to edit that information was gone and somehow defaulted to 'blank'. That's my best guess, anyway as the issue was resolved by re-scanning.
Similar Messages
-
ThinkPad Twist with USB3 dock display problem
I have a ThinkPad Twist running Windows 8 driving a single external display through a Lenovo USB3 dock. When I extend my screen across both displays or if I close the laptop and just use the external display, then the display periodically goes black and then recovers. If I duplicate the laptop screen onto the external monitor all is good.
Sometimes this is caused by UAC and other password requests. In that case the screen stays black until I respond to the pop-up on the laptop screen. I understand that this is a security feature. Other times it seems to happen spontaneously. Several times I have sat and watched the external display go black for a few seconds then recover several times a minute without any user activity. I don't think that's related to a security feature.
I also have a Lenovo X1 Carbon running Windows 8. When using it with the same USB3 dock I have never experienced this issue.I was in the same scenario, my company bought a Twist for testing but we want Windows 7 because we can't train everyone on using Windows 8.
I finally found a project on SourceForge that seems to be working great.
http://yeokhengmeng.com/2013/01/auto-rotate-screen
I had to install the ThinkVantage Active Protection System before the program would function.
http://support.lenovo.com/en_US/downloads/detail.page?DocID=DS014892
It's a simple install, you calibrate the different rotations of the laptop, read the README it will tell you how to get going, it takes 5 minutes.
I added it as a startup item for all users but I had to follow these instructions to get rid of a security prompt.
http://www.technipages.com/disable-publisher-could-not-be-verified-messages.html
I've been testing it and it's almost better than using the built-in button because it's automatic. -
Can anyone help me with a little display problem in IE7 please?....
I have just uploaded a new site which has been created using Dreamweaver CS4 for Windows. There is no problem viewing the site in IE 8, or in Firefox.
The site is basically a gallery of images. For some of the main images I've used little magnifying glass 'plus' symbols, which are simply linked rollover png images that take you to a larger version of the image. In IE7 (and I presume in older versions too) these little symbols aren't displaying in the correct position on each of these pages, they've jumped and are incorrectly displaying over the top, left corner of the main image.
Here's the link:
www.sjcillustration.com
Firstly, why is this happening in IE7 and yet all's fine in IE8 or in Firefox, and secondly, can anyone tell me how to fix it please?
(I was going to attach the corresponding CSS file but don't see an attach file button.......)
Cheers!Hi Cristian, thanks for responding so speedily!
On the homepage, click on the 'diagrammatic' thumbnail for example, then click on the 'volcano' thumbnail, when the volcano page appears, you should see the little magnifying glass plus rollover image under the main image to the right. As I said, on these specific pages, in IE 7 the symbol jumps to the top left of the main image.
For your info, I have seen this problem on my older XP pc, which runs IE 7. All is fine on my newer Vista pc, which is using IE8 & Firefox.
Maj -
Retention of applications initially installed with other ID & Display problem on yahoo
Hi all.
1. How do one retain applications installed through other ID's on the Ipadwithout Itunes asking to replace them?
2. Some messages received on Yahoo are not being displayed, what is the remedy for this?
Thank you allhi,
1) i would say you can just put differen't ID's into the ipad etc and download or use them in that and then change them back to anther ID. the only problem would then be getting them to your computer or icloud on anthere ID. apple has made it so that you have one ID and you can then have them all on your devises. They don't want you useing more then one ID as they can't see if you are just trying to take one of your friends app's music etc. as this would brake the copyright on them apple can not let this happen cos of this.
2) if you mean in mail when it say this message can't be displayed it means that your ipad has not downloaded the email yet try the bottem left and refresh it, if these doesn't work then i would go back to the main mail screen and try it then or just wait for it to download. -
Need help with 21" imac display problem. The resolution seems to be unsual, everything on the desktop background goes off the screen. The resolution is set at 1920 x 1080
Quit the game and restart the iPad.
To quit the game - Go to the home screen first by tapping the home button. Quit/close open apps by double tapping the home button and the task bar will appear with all of you recent/open apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner to close the apps. Restart the iPad. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
If that doesn't work try this.
Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. -
Display Problem with my Mac Pro and LG Flatron Wide Monitor in Mountain Lion
After upgrading to Mountain Lion, my Mac Pro has display problems with my LG Flatron display. The image is displayed with a black bar on the right and on the bottom. And the left side of the content is not visible. I tried every resolution available in the Display System Preferences, they are different in terms of how big the black bars are, and what part is not visible, but none of them are correct. I held down the option key to try to detect displays or switch to resolutions that are not normally available. When I restart the image is lined up with the display, but if the display ever goes to sleep or gets turned off, the image reverts to being off center, and the only way I can get it back is to restart... The interesting thing is that this monitor works fine with the same machine if I reboot using BootCamp into Windows 7. The Monitor also works fine, connecting the same connector to a Mac Mini, although that mac mini is running 10.6 and not Mountain Lion. I've reset the SMC and restarted countless times, I don't see any other levers to pull or things to try...
That card is for a PC it may not give you Startup and Option-Boot screens.
The 7950 "Mac Edition" card has a very distinctive look:
http://www.sapphiretech.com/presentation/product/product_index.aspx?cid=1&gid=3& sgid=1157&pid=1777&psn=&leg=0&lid=1 -
Dual Display Problem with new MacBook Pro
Hi All,
I just got a new MacBook Pro Core 2 Duo and a 30" Dell LCD Monitor. Both are AWESOME products, BTW. But I am having a weird issue with running both displays.
If I sleep/wake the computer so that I'm never running with dual displays, everything seems fine. However, no matter what I try, I eventually get a system hang if both displays are active at once.
For example, if I turn the MBP off, attach the monitor, and power up, the MBP will get to the login screen. As soon as it hits the logon screen, it hangs.
If I hot-plug the monitor while the system is running, it will detect the new display and activate it as a secondary desktop. But, in anywhere from 5 seconds to 15 minutes (varies each time) the MBP display will turn off and the system hangs.
To me, it seems like a video driver bug or something similar to that?
Thanks!To those of you that inquired, NO, I have not yet resolved this problem.
I took the laptop into the Apple store, and they decided that it needed a new logic board. Then, once they received the part, and I took the laptop in for repair, they didn't replace the logic board. The guy on the bench reset the PRAM and decided that the problem was resolved. I took it home, and within about 20 minutes the same thing happened.
When I took it back to the store, I was unable to reproduce the problem for the mac Genius.
It still does it, I I just haven't had a chance to take it back to the store to try to reproduce the problem again. -
Problem with repaint of display after a click event
Hi,
I have a problem with repaint of display. In particular in method keyPressed() i inserted a statement that, after i clicked bottom 2 of phone, must draw a string. But this string doesn't drawing.
Instead if i reduce to icon the window, which emulate my application, and then i enlarge it, i see display repainted with the string.
I don't know why.
Any suggestions?
Please help me.modified your code little
don't draw in keyPressed
import java.io.IOException;
import javax.microedition.lcdui.Canvas;
import javax.microedition.lcdui.Command;
import javax.microedition.lcdui.CommandListener;
import javax.microedition.lcdui.Display;
import javax.microedition.lcdui.Displayable;
import javax.microedition.lcdui.Graphics;
import javax.microedition.lcdui.Image;
public class PlayerCanvas extends Canvas implements CommandListener{
Display display;
Displayable dsp11;
private Image play, pause, stop, next, previous = null;
private int gamcode;
private Command quitCmd = new Command("Back", Command.ITEM, 1);
public PlayerCanvas(Display display,Displayable dsp11){
this.display =display;
this.dsp11 =dsp11;
addCommand(quitCmd);
createController();
setCommandListener(this);
display.setCurrent(this);
protected void paint(Graphics g)
g.setColor(255,200,150);
g.fillRect(0, 0, getWidth(), getHeight());
if (play != null){
g.drawImage(play, getWidth()/5, getHeight()-50, Graphics.BOTTOM | Graphics.HCENTER);
if (stop != null){
g.drawImage(stop, getWidth()/5, getHeight()-10, Graphics.BOTTOM | Graphics.HCENTER);
if (next != null){
g.drawImage(next, (getWidth()/5)+10, getHeight()-30, Graphics.BOTTOM | Graphics.LEFT);
if (previous != null){
g.drawImage(previous, (getWidth()/5)-30, getHeight()-30, Graphics.BOTTOM | Graphics.LEFT);
/////this will draw on key UP
g.setColor(0,0,0);
System.out.print(gamcode);
if(gamcode==Canvas.UP){
g.drawString("PROVA",10, 0, 0);
}else if(gamcode==Canvas.DOWN){
g.drawString("DIFFERENT",10, 30, 0);
private void createController()
try {
play = Image.createImage("/icon3.png");//replace your original images plz
pause = Image.createImage("/icon3.png");
stop = Image.createImage("/icon3.png");
next = Image.createImage("/icon3.png");
previous = Image.createImage("/icon3.png");
} catch (IOException e) {
play = null;
pause = null;
stop = null;
next = null;
previous = null;
if (play == null){
System.out.println("cannot load play.png");
if (pause == null){
System.out.println("cannot load pause.png");
if (stop == null){
System.out.println("cannot load stop.png");
if (next == null){
System.out.println("cannot load next.png");
if (previous == null){
System.out.println("cannot load previous.png");
protected void keyPressed(int keyCode)
repaint();
if ( (keyCode == 2) || (UP == getGameAction(keyCode)) ){
gamcode = UP;
repaint();
else if ( (keyCode == 8) || (DOWN == getGameAction(keyCode)) ){
gamcode =DOWN;
repaint();
else if ( (keyCode == 4) || (LEFT == getGameAction(keyCode)) ){
else if ( (keyCode == 6) || (RIGHT == getGameAction(keyCode)) ){
public void commandAction(Command arg0, Displayable arg1) {
// TODO Auto-generated method stub
if(arg0==quitCmd){
display.setCurrent(dsp11);
} -
I have Iphone 5 and have an issue with deleting part of the messages in Imessage conversation. The trash button is not displayed to delete part of the imessage. I see only delete all option. Is it a bug?
Hi An Iphone user,
If you are having issues deleting a specific message from an iMessage conversation (not seeing the Trash icon), you may want to double-check that you are following the steps outlined in the following article:
How do I delete a message?
To delete a message, tap and hold the message bubble, then tap More.
Tap Delete All to delete all the messages. Or tap to select the messages you want to delete, then tap .
After you delete a message, you can recover it only by restoring from a backup.
Send messages with your iPhone, iPad, or iPod touch - Apple Support
Regards,
- Brenden -
The box and button lines are not displayed or are mis-sized, if they appear at all; problem varies with the website and page style.
The threads I found in discussions mentioned a couple pages that are no longer active/cannot be opened -- so these solutions don't work.
When starting version 5x and 6beta I get information certain add-ons are STILL incompatible with these versions?
Are there any work-arounds or patches?I am having this problem too. Just like WinOnBatch the problem started for me around firefox 5.0.1.
I have not been able to get rid of this problem. I have tried creating a new profile, restarting firefox in safe mode. disabling extensions 1 by 1. When I built this computer I did a clean install of firefox 5.0.1, and 2 weeks later with no extensions the problems came back. At that point I had the Java and flash plugins only.
When firefox 6 was released I did another fresh install (uninstalled firefox, went through my hard disc and deleted any reference to firefox and mozilla. Did the same in the registry, then run a registry cleaner and restarted the computer) before I installed firefox 6 and the problem was happening in less than a week. The I said to hell with it and re-created my entire profile from scratch and installed all my old extensions (updated them off course). 2 weeks ago it got really sever and I couldn't see any buttons on the chome interface and all web pages I visited were displaying really messed up. The only way i can describe it is kinda like greentech70 screenshots but on every inch of the application window. Like a really bad screen tearing effect.
The only thing that seem to help is when I downgraded to firefox 3.6.18. That fixed it but like greentech70 I have security and privacy concerns, so upgraded to firefox 6 again as the issue went away for 1 day, then came back but not as severe. since then I have been downgrading to firefox 3.6.18 re-installing java and flash, then upgrading back to firefox 6. It keeps the problem minimised but im still plagued by it. I also wonder if its a problem with firefox's 6 graphical engine. -
ITunes 11.1.3.8 on Windows 8.1 64 bit display problems with CD tracks and Internet Radio
Recently installed iTunes 11.1.3.8 on a Windows 8.1 64 bit machine and I have the following problems:
1) Inserting a CD in order to listen or import tracks I get no display of tracks when I click the CD drive in the side bar. The list has only white and gray lines where the tracks should have been listed and the top of the table contains some grabbed display from Music table (i.e. the first track that was displayed in Music but only 2/3 of the line. The status bar at the bottom of the iTunes window shows correct information about the number of tracks and total playing time.
2) Hitting the play button while on this CD Drive listing starts the playback but the tracks play in random sequence even though shuffle play is not selected (not blue to be precise). In the zone with track name, playback progress, elapsed and remaining time and other track options the indications are correct.
3) Importing the CD works but the tracks are imported in random order. Track information from CDDB providers is accurate eventhough nothing is displayed while selecting CD drive as per problem 1). Imported tracks in Music show in random order. This is also strange because when I was importing something from a CDDB indexed CD or even a non indexed one the tracks were always imported in the order they were written on disc.
4) Going to Music -> Internet I get the same white and gray lines with no stations displayed but this time the status bar reads Zero Stations. Obviously I can't select/listen anything
I'd say I'm quite experienced with iTunes, using it since 2005 but never had problems of this type. Some assistance would be helpful. I smell a bug that maybe shows up in my particular configuration. Searched everywhere, maybe not good enough, but couldn't find something even similar.i have the same problem no radio stations at all bit shabby hate technolgy now adays
-
Display Problems With My Powermac G5
I just got a used Powermac G5. It's the first-generation G5 machine, the Power Mac 7,2 model, which shipped with OSX 10.2 on it and the one I got had been sitting in a closet since the days of Jaguar and never upgraded.
Way back when I had only one computer, an eMac running OSX 10.4 (standard install that it came with), I created a bootable backup of it on a Firewire drive and of late I've been using that as a boot drive to test new Macs I want to add to my collection (since new purchases often come with pulled hard drives or no operating systems, and I need an easy way to make sure it starts up before I pay for it). It's usually worked, but this one doesn't. It boots off the external drive and will happily run OSX 10.4 off it, but the display is all glitched; it's mostly black and white with a few colours and virtually unusable. Funny thing is that to the extent I can view it at all, I looked at System Preferences— it claimed the monitor had defaulted to 8-bit colour but that it had actually loaded the graphics card's driver and recognised the card as an ATI Radeon 9600, the stock card for that model and also the stock card for the eMac I cloned that copy of OSX 10.4 from.
Only problem is that I don't think the stock card is still in that machine, as it's been heavily modified. It came with an ADC connector, which is now removed in favour of a second DVI connector (which is a pity; given the tendency of old computers to come in lots, I have a buildup of ADC monitors) and System Profiler claimed 256 MB of onboard video RAM which is a bit much for a 9600 which I believe only came with 64.
After some experimentation, I learned that this machine WILL boot OSX 10.5 from my external drive (but with the same issues). I also learned that it already has an operating system installed— OSX 10.2, the one it shipped with. This one works without the graphical issues, and its system profiler continues to insist that the machine has a Radeon 9600 graphics card. (I haven't had the chance to open it up and check, but it seems strange.) The Displays panel will not allow me to select any resolution other than the current one.
I wonder if any of this is caused by my use of an Acer monitor; would it be happier with an Apple monitor? Are special drivers required? The two operating systems I booted from the external drive both came from systems with built-in displays.By sheer luck, one of my newer acquisitions came with an OSX 10.4 install DVD, so I decided to take it for a spin in the G5 to see if it was really the graphics card or just some driver issue caused by the fact that the systems on the external drive were default installs pulled from other computers and not "universal" installs.
When I booted off the install disc, the display was glitched as with any other attempt to boot OSX 10.4, but I was able to muddle my way through an install nonetheless, and when I finished, the completed install had a perfectly functional display!
Well, functional except that the display panel of System Preferences still can't select anything other than the monitor's native resolution.
I still think it's some sort of software issue; the machine's default OS provides a functional display, a "universal" install of OSX 10.4 provides a functional display, but a default install pulled from an eMac or a Macbook, and the limited system one gets booting off an install disc produces a glitched display.
Apparently, there's an ATI driver package for the 9600 PC + Mac edition available to download; maybe that will fix the displays panel in System Preferences? -
External Display Problem with x301
Hi everybody,
I have a external display Problem with my x301.
Ether direct attachment or via Lenovo USB Display Port Device, the external monitor (22" Benq LCD) starts to flickr after a couple of minutes and the external display shuts off.
Any ideas on this?
Thanks a lot
Chrisi have the same problem with X200 and the X200 ultrabay Docking station.
No idea yet ... -
Hi. I'm having a problem with iTunes. It seems to be a display problem.
Here's the link:
http://i40.tinypic.com/1zlqaoh.jpg
Reinstalling iTunes does not help. The same problem occurs.
Any help would be appreciated.Hello, Welcome to discussions. You will want to check out the technical troubleshooting below that will provide more assistance.
http://support.apple.com/kb/TS2030 -
Display problem in JRE1.5 same works with 1.4.2
I have a complex swing GUI code with JTree that has display problem. The code works well with JRE1.4.2. When opened with JRE1.5_<> the display is not working. Resizing with a mouse displays though. Programmatic resize doesn't work.
I suggest you compile with 1.5 using the appropriate values of the -source and -target options to the javac command that cause it to emit 1.4 code - and see what happens.
And also review the changes and bug fixes made between the two Java versions that you're comparing, looking for changes that account for the difference you're seeing.
Maybe you are looking for
-
Are there any limitations in the Student Edition
Hi, I just purchased the Student Adobe Creative Cloud. Are there any limitations? Also, can I put this on both of my personal computers, or just one? Thanks!
-
After upgrading to OS 10.6.7, when I insert a purchased CD, iTunes no longer accesses Gracenotes. I now have to manually type in the song titles. I tried Advanced > Get Track Titles but it doesn't work. Any suggestions?
-
Controller detected its ip address by machine with MAC Address
Hi I am getting error "Controller detected its ip address x.x.x.x using my machine with MAC address xx:xx:xx:xx:xx:xx"when i upgrade my Cisco Wireless Controller 5508 from 7.0.116.0 to 7.4.110.0. Any suggestion Regards
-
Global Catalog binding thru JNDI
Hi, Has anyone tried binding to the Global Catalog thru JNDI, if Yes can you send some pointers on how to achieve it. TIA, Raj.
-
Multiple ISPs & single IP/MPLS/ADSL infrastructure
Actually very soon we'll have an IP/MPLS core network with ADSL access network. What we are going to do is to make several ISPs to use the IP/MPLS core in order to provide internet to their users. Can we configure an MPLS VPN for each Service Provide