MN04 not working for free text PO

Hi All,
I have maintained a condition record through MN04 in purchase organisation, company code and vendor combination. This condition record is working fine for regular purchase orders. But it is not working for free text PO's. Could you please guide me why is it so?
I am maintaining same purchase organisation, company code and vendor combination for free text PO also. Question is why it is working for a purchase order with material inside it and why it is not working for purchase order with out material.
Thank you all in advance

Hi,
Seems you are using a custom print program and form. I would suggest to change the program to SAPFM06P, form routine as "ENTRY_NEU" and the form as "MEDRUCK" in NACE transaction for the output type and check the scenario again. Also cross check the settings with the KBA: 1829682 - Output type is not determined in Purchase order
If its getting triggered, then check the custom program and the form with the help of technical team.
Regards,
AKPT

Similar Messages

ALV Filter : Not working for a text field - Strange problem

Dear All,
I have a Z-program where the ALV filter is not working on a particular text field.
The output on that text field is as below :
ABCD
JKLM
YYZZ
ABCD
JKLM
ABCD
JKLM
YYZZ
YYZZ
When we try to filter on YYZZ, it gives blank list. But for other options given abobe it works fine.
I know it is because of the negative sign , but how can we over come this problem ?
Thanks in advance,
Sandip.

Hi Sandip,
Use 'LOWERCASE' in the fieldcatalog.
For the particular text field when you are appending the Fieldcatalog structure to the Fieldcatalog Table
( Suppose LS_FIELDCAT)
Then check the LOWERCASE field.
(LS_FIELDCAT-LOWERCASE = 'X' )
This will serve the purpose.
Regards,
Sourav

Query SQ07 Translation not working for default text

HI Experts,
In a query created with EN as default language, when execute - the selection screen will show the tiltle text (such as - Report-Specific Selection, Output Specification & Layout)
I am unable to translate these selection text to other language using SQ07.
When execute in different language - all text are translated except these 3 still remains in EN.
Do you know where can I change the text?
Should it not be standard and being translated automatically when log on to different language?
Kindly advice.
Thank You

Thanks Sajid,
But are you suggesting to go into the program which was generated by SAP once created the query and do a change mode in SE38 ?
Isnt it not encourage to change from there & we need to register the object and get the access key ?
Correct me if i am wrong.
Any suggestions ?
Thank You.

Allow Custom Text Entry for Drop down not working For Dynamic form

Dear All,
In drop down field Allow custom text entry is working fine if the form is save as a static pdf form file.But if the form is save as a Dynamic pdf form file it is not working.I can enter custom text in drop down field but after filling it up when I click on next field the text from the drop down is disappearing.
If any body can please help me to solve this problem.
Thanks a lot in advance
Regards
Rakesh

Dear Jimmypham,
Thanks a lot for your quick response.But it's not working for me.I have even tried with a form having only single field and save it as a dynamic pdf file.In that form also it's not working.The text which I have entered is disappearing when I click outside of this field.
Can you please help me to find out the solution for this problem.
Regards
Rakesh

Sound not working for text alert just vibrate

Sound not working for text alert just vibrate and no sound on keyboard

I'm having the same problem, it just started today (11/13/2012).
Settings > Sounds> Text Tone = Tri-tone
Lock Sounds = On
Keyboard Clicks = Off
The mute button is also in the correct place (ring, not mute).

Form Designed in LiveCycle will not work for End User

Please Help!
I am a newbie to Adobe LiveCycle but recognized the utility in the program, so decided to give it a while to try and streamline some of my employer's forms. After spending too much time learning how to design a form (much to the dislike of my boss), I am finally going to have to ask for some help. So here's the deal:
I've designed a dynamic pdf in LiveCycle with two master pages and two repeating flowed subforms. The first repeating subform is basically an expanding table intended to be used as a photographer's log where they can log each photo taken with the camera. The expanding table has some code with a button at the top for the end user to enter the number of photos on the photo roll, click submit, and table expands to however many instances of rows are needed for each photo that was taken. The second subform is basically an image field and text fields used as photo captions/photo compilation pages. When the end user clicks submit on the first subform to expand the table, I also have javascript in that click event to also create same amouint of instances of the second subform (the photo compilation page(s)). Each text field for the photo caption on the second subform is populated by the data entered into the photo log table cells. I was able to find a script to correctly populate those fields for each instance of the table. Wish I had the form here, but it's at work at the moment.
My problem is this: I've scratched and clawed to get all of the forms expanding correctly and the scripts populating each instance of the fields correctly and everything works great in LiveCycle preview. I then saved the form as PDF for use by my field crew personnel (whom all use, at the very least, Adobe Pro 9, but most Pro X). I sent the new form to them and they move it to their desktop, open it with Adobe Pro, and populate all of the fields and everything works swimmingly. However, once they save it, it gets all jumbled and they can't even print it. We even thought we found a workaround by entering all data and printing to PDF, but even that has turned out to not work. I checked to make sure that I designed and saved the form in LiveCycle for use with the Adobe Pro versions, but still not working for my end users.
Anyone have any thoughts on my long explanation?? Please HELLLLPPPP!

The error(s) occur when trying to save the document. I want each user to tell the first page how many rows they will need in the photo log table, so they would enter however many photos were taken in the box: "Number of Photos on Roll:" ---> Then click the "Submit" cmd button. That should expand the table. Once it expands, it should also add the same amount of instances of the photo compilation page (2nd Page) as there are rows in 1st page table. Then the user will populate each cell of the table on page 1 with data. The data entered into the page 1 table cells will populate the text fields (photo caption) in Page 2 once the user clicks on the "Populate Captions!" cmd button in the lower left corner of the table on Page 1.
The problem is in the distributing of the form to the user so they can save the form after populating the data. I did a test run this morning and for some reason it did do the "print to PDF" correctly for 5 photos on the roll (though this has not been happening every time and especially for a large number of pages, ie. 80 photos). However, after entering the data for 5 rows on page 1 and then populating the 5 photo compilation pages, I saved a copy as "Save As PDF" and closed the document. Then re-opened the copy in Acrobat Pro X. The new copy:
-had 5 additional rows added to Page 1
-Duplicates of some of the fields
-Only retained the 1st instance of the Second Page (Photo w/ Caption) and not all fields were populated
Again, this all works fine in the LiveCycle Preview but not anywhere else. I do not have this set up to be linked to an external data source (YET) but there is javascript in the cmd buttons. I also do not want to distribute this form to end users and then collect the data back from them. I want them to be able to save a copy of my LiveCycle designed form, open in Adobe Pro, populate the data and save as many copies as needed for form production.

Auto_lexer (stemming) not working for other languages(other than english)

Hi All,
We are planning to use AUTO_LEXER instead of MULTI_LEXER and observed that stemming is not working for German where as it is working for English when I use AUTO_LEXER. I even used query templates but of no use.
But when i use MULTI_LEXER, creating sub lexers for German and Enlgish, Stemming is working for German also after changing the session language and setting stemmer of wod list to German (Which is expected).
Following is the code for AUTO_LEXER creation:
CREATE TABLE test_auto_lexer(pkey NUMBER(5,0),
lang_index VARCHAR2(3),
content_text CLOB,
CONSTRAINT test_auto_lexer_pk primary key (pkey))
INSERT INTO test_auto_lexer(pkey,lang_index,content_text)
VALUES (1,'eng','I drive a bike')
INSERT INTO test_auto_lexer(pkey,lang_index,content_text)
VALUES (2,'eng','I drove a bike')
INSERT INTO test_auto_lexer(pkey,lang_index,content_text)
VALUES (3,'eng','I have driven a bike')
INSERT INTO test_auto_lexer(pkey,lang_index,content_text)
VALUES (4,'eng','Just check for other things')
INSERT INTO test_auto_lexer(pkey,lang_index,content_text)
VALUES (5,'eng','always drive a car')
INSERT INTO test_auto_lexer(pkey,lang_index,content_text)
VALUES (6,'eng','it is nothing')
INSERT INTO test_auto_lexer(pkey,lang_index,content_text)
VALUES (7,'ger','Ich fahre ein Fahrrad')
INSERT INTO test_auto_lexer(pkey,lang_index,content_text)
VALUES (8,'ger','Ich fuhr ein Fahrrad')
INSERT INTO test_auto_lexer(pkey,lang_index,content_text)
VALUES (9,'ger','Ich habe ein Fahrrad gefahren')
INSERT INTO test_auto_lexer(pkey,lang_index,content_text)
VALUES (10,'ger','Aktivieren Sie einfach für andere Dinge')
INSERT INTO test_auto_lexer(pkey,lang_index,content_text)
VALUES (11,'ger','immer Auto fahren')
INSERT INTO test_auto_lexer(pkey,lang_index,content_text)
VALUES (12,'ger','es ist nichts')
INSERT INTO test_auto_lexer(pkey,lang_index,content_text)
VALUES (13,'ger','sprechen')
INSERT INTO test_auto_lexer(pkey,lang_index,content_text)
VALUES (14,'ger','sprach')
INSERT INTO test_auto_lexer(pkey,lang_index,content_text)
VALUES (15,'ger','gesprochen')
INSERT INTO test_auto_lexer(pkey,lang_index,content_text)
VALUES (16,'ger','tale')
INSERT INTO test_auto_lexer(pkey,lang_index,content_text)
VALUES (17,'ger','Indlæg')
INSERT INTO test_auto_lexer(pkey,lang_index,content_text)
VALUES (18,'ger','tales')
BEGIN
ctx_ddl.create_preference('auto_lexer1', 'auto_lexer');
END;
BEGIN
ctx_ddl.set_attribute('auto_lexer1','index_stems','yes');
END;
BEGIN
ctx_ddl.set_attribute('auto_lexer1','language','danish english german');
END;
BEGIN
ctx_ddl.set_attribute('auto_lexer1','alternate_spelling','german');
END;
CREATE INDEX test_auto_lexer_ix1
ON test_auto_lexer(content_text)
INDEXTYPE IS ctxsys.context
PARAMETERS ('datastore ctxsys.direct_datastore filter ctxsys.null_filter lexer auto_lexer1')
select to_char(content_Text) from test_auto_lexer where contains(content_text,
'<query>
<textquery lang="ger" grammar="context">
$fahren
</textquery>
<score datatype="integer"/>
</query>') > 0
this doesnt work even after changing the session language. My default Sesson language is AMERICAN.
Could any one help me with this, in case I am missing something here. I would be really thankful.
Edited by: Nagendra Prasad on Jan 23, 2010 12:05 AM

In the future, please begin a new thread for a new question and provide a link to a related question.
According to the online documentation, Oracle only supports stemming for English, Dutch, French, German, Italian, Spanish, and Japanese. Oracle does not support Russian stemming, although you may have gotten some accidental results, due to identifying it as a different language and applying stemming rules for that language. The following manual sections show the languages available for the index_stems attribute of the basic_lexer and stemmer attribute of the basic_wordlist:
Basic_lexer attributes:
http://docs.oracle.com/cd/E11882_01/text.112/e24436/cdatadic.htm#CIHHBAAD
Basic_wordlist attributes:
http://docs.oracle.com/cd/E11882_01/text.112/e24436/cdatadic.htm#g1019326
Also, please see the following note:
Features not available in 11.2.0.3:
http://docs.oracle.com/cd/E11882_01/readmes.112/e22488/toc.htm#BABDGGDB
"Certain Oracle Text functionality based on third-party technologies, including AUTO_LEXER and CTX_ENTITY, have been disabled in this release (reference Bug 12618046). For BASIC_LEXER, the usage of the INDEX_STEMS attribute values that depend on third-party technologies, is also affected. If this impacts an existing application, contact Oracle Support Services for guidance."
Also, the auto_lexer has been replaced by the world_lexer, which only has one attribute:
http://docs.oracle.com/cd/E11882_01/text.112/e24436/cdatadic.htm#BHCJEGFJ
I don't work for Oracle, so I don't know why they do things the way they do.
So, you need to stick with the basic_wordlist for stemming, not the lexers. However, you may get better performance by combining the multi_lexer with the basic_wordlist, as the multi_lexer eliminates time spent on automatic language detection. But, you need to remember not to use the index_stems with your lexer, since it will conflict with the wordlist. I am not experiencing any time problems as you have. Please see the demo below. I have provided the whole script below that, so that you can reproduce it on your system. If you still have problems, then it may be due to differences in versions.
-- demo:
SCOTT@orcl_11gR2> select * from v$version
2 /
BANNER
Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
PL/SQL Release 11.2.0.1.0 - Production
CORE     11.2.0.1.0     Production
TNS for 64-bit Windows: Version 11.2.0.1.0 - Production
NLSRTL Version 11.2.0.1.0 - Production
5 rows selected.
SCOTT@orcl_11gR2> select value from v$nls_parameters
2 where parameter = 'NLS_CHARACTERSET'
3 /
VALUE
AL32UTF8
1 row selected.
SCOTT@orcl_11gR2> DROP TABLE news
2 /
Table dropped.
SCOTT@orcl_11gR2> EXEC CTX_DDL.DROP_PREFERENCE ('my_wordlist')
PL/SQL procedure successfully completed.
SCOTT@orcl_11gR2> EXEC CTX_DDL.DROP_PREFERENCE ('global_lexer')
PL/SQL procedure successfully completed.
SCOTT@orcl_11gR2> EXEC CTX_DDL.DROP_PREFERENCE ('english_LEXER')
PL/SQL procedure successfully completed.
SCOTT@orcl_11gR2> EXEC CTX_DDL.DROP_PREFERENCE ('german_LEXER')
PL/SQL procedure successfully completed.
SCOTT@orcl_11gR2> CREATE TABLE news
2    (pkey            NUMBER,
3      lang            VARCHAR2 (2),
4      short_content CLOB)
5 /
Table created.
SCOTT@orcl_11gR2> INSERT ALL
2 INTO news (pkey, lang, short_content)
3    VALUES (1, 'en', 'I drive a bike.')
4 INTO news (pkey, lang, short_content)
5    VALUES (2, 'en', 'I drove a bike.')
6 INTO news (pkey, lang, short_content)
7    VALUES (3, 'en', 'I have driven a bike.')
8 INTO news (pkey, lang, short_content)
9    VALUES (4, 'en', 'I always drive a car')
10 INTO news (pkey, lang, short_content)
11    VALUES (5, 'en', 'This is nothing')
12 INTO news (pkey, lang, short_content)
13    VALUES (6, 'de', 'Ich fahre ein Fahrrad.')
14 INTO news (pkey, lang, short_content)
15    VALUES (7, 'de', 'Ich fuhr ein Fahrrad.')
16 INTO news (pkey, lang, short_content)
17    VALUES (8, 'de', 'Ich habe ein Fahrrad gefahren.')
18 INTO news (pkey, lang, short_content)
19    VALUES (9, 'de', 'Ich habe immer ein Auto fahren.')
20 INTO news (pkey, lang, short_content)
21    VALUES (10, 'de', 'Es ist nichts.')
22 SELECT * FROM DUAL
23 /
10 rows created.
SCOTT@orcl_11gR2> BEGIN
2    -- word list:
3    ctx_ddl.create_preference ('my_wordlist',   'basic_wordlist');
4    ctx_ddl.set_attribute      ('my_wordlist',   'stemmer',           'auto');
5    -- english lexer:
6    ctx_ddl.create_preference ('english_lexer', 'basic_lexer');
7    -- german lexer:
8    ctx_ddl.create_preference ('german_lexer', 'basic_lexer');
9    ctx_ddl.set_attribute      ('german_lexer', 'composite',       'german');
10    ctx_ddl.set_attribute      ('german_lexer', 'alternate_spelling', 'german');
11    ctx_ddl.set_attribute      ('german_lexer', 'mixed_case',       'no');
12    ctx_ddl.set_attribute      ('german_lexer', 'base_letter',       'yes');
13    -- multi_lexer:
14    ctx_ddl.create_preference ('global_lexer', 'multi_lexer');
15    ctx_ddl.add_sub_lexer      ('global_lexer', 'default',            'english_lexer');
16    ctx_ddl.add_sub_lexer      ('global_lexer', 'german',            'german_lexer');
17 END;
18 /
PL/SQL procedure successfully completed.
SCOTT@orcl_11gR2> create index search_news
2 on news (short_content)
3 indextype is ctxsys.context
4 parameters
5    ('lexer            global_lexer
6       language column lang
7       wordlist       my_wordlist')
8 /
Index created.
SCOTT@orcl_11gR2> EXEC DBMS_STATS.GATHER_TABLE_STATS (USER, 'NEWS')
PL/SQL procedure successfully completed.
SCOTT@orcl_11gR2> COLUMN short_content FORMAT A30
SCOTT@orcl_11gR2> ALTER SESSION SET NLS_LANGUAGE = 'AMERICAN'
2 /
Session altered.
SCOTT@orcl_11gR2> set timing on
SCOTT@orcl_11gR2> select * from news
2 where contains (short_content, '$drive') > 0
3 /
      PKEY LA SHORT_CONTENT
         1 en I drive a bike.
         2 en I drove a bike.
         3 en I have driven a bike.
         4 en I always drive a car
4 rows selected.
Elapsed: 00:00:00.05
SCOTT@orcl_11gR2> select * from news
2 where contains (short_content, '$drove') > 0
3 /
      PKEY LA SHORT_CONTENT
         1 en I drive a bike.
         2 en I drove a bike.
         3 en I have driven a bike.
         4 en I always drive a car
4 rows selected.
Elapsed: 00:00:00.05
SCOTT@orcl_11gR2> ALTER SESSION SET NLS_LANGUAGE = 'GERMAN'
2 /
Session altered.
Elapsed: 00:00:00.01
SCOTT@orcl_11gR2> select * from news
2 where contains (short_content, '$fahr') > 0
3 /
      PKEY LA SHORT_CONTENT
         6 de Ich fahre ein Fahrrad.
         7 de Ich fuhr ein Fahrrad.
         8 de Ich habe ein Fahrrad gefahren.
         9 de Ich habe immer ein Auto fahren
4 rows selected.
Elapsed: 00:00:00.07
SCOTT@orcl_11gR2> select * from news
2 where contains (short_content, '$fuhr') > 0
3 /
      PKEY LA SHORT_CONTENT
         6 de Ich fahre ein Fahrrad.
         7 de Ich fuhr ein Fahrrad.
         8 de Ich habe ein Fahrrad gefahren.
         9 de Ich habe immer ein Auto fahren
4 rows selected.
Elapsed: 00:00:00.16-- script for you to reproduce the demo on your system:
select * from v$version
select value from v$nls_parameters
where parameter = 'NLS_CHARACTERSET'
DROP TABLE news
EXEC CTX_DDL.DROP_PREFERENCE ('my_wordlist')
EXEC CTX_DDL.DROP_PREFERENCE ('global_lexer')
EXEC CTX_DDL.DROP_PREFERENCE ('english_LEXER')
EXEC CTX_DDL.DROP_PREFERENCE ('german_LEXER')
CREATE TABLE news
(pkey           NUMBER,
   lang           VARCHAR2 (2),
   short_content CLOB)
INSERT ALL
INTO news (pkey, lang, short_content)
VALUES (1, 'en', 'I drive a bike.')
INTO news (pkey, lang, short_content)
VALUES (2, 'en', 'I drove a bike.')
INTO news (pkey, lang, short_content)
VALUES (3, 'en', 'I have driven a bike.')
INTO news (pkey, lang, short_content)
VALUES (4, 'en', 'I always drive a car')
INTO news (pkey, lang, short_content)
VALUES (5, 'en', 'This is nothing')
INTO news (pkey, lang, short_content)
VALUES (6, 'de', 'Ich fahre ein Fahrrad.')
INTO news (pkey, lang, short_content)
VALUES (7, 'de', 'Ich fuhr ein Fahrrad.')
INTO news (pkey, lang, short_content)
VALUES (8, 'de', 'Ich habe ein Fahrrad gefahren.')
INTO news (pkey, lang, short_content)
VALUES (9, 'de', 'Ich habe immer ein Auto fahren.')
INTO news (pkey, lang, short_content)
VALUES (10, 'de', 'Es ist nichts.')
SELECT * FROM DUAL
BEGIN
-- word list:
ctx_ddl.create_preference ('my_wordlist',   'basic_wordlist');
ctx_ddl.set_attribute     ('my_wordlist',   'stemmer',            'auto');
-- english lexer:
ctx_ddl.create_preference ('english_lexer', 'basic_lexer');
-- german lexer:
ctx_ddl.create_preference ('german_lexer', 'basic_lexer');
ctx_ddl.set_attribute     ('german_lexer', 'composite',          'german');
ctx_ddl.set_attribute     ('german_lexer', 'alternate_spelling', 'german');
ctx_ddl.set_attribute     ('german_lexer', 'mixed_case',          'no');
ctx_ddl.set_attribute     ('german_lexer', 'base_letter',         'yes');
-- multi_lexer:
ctx_ddl.create_preference ('global_lexer', 'multi_lexer');
ctx_ddl.add_sub_lexer     ('global_lexer', 'default',             'english_lexer');
ctx_ddl.add_sub_lexer     ('global_lexer', 'german',              'german_lexer');
END;
create index search_news
on news (short_content)
indextype is ctxsys.context
parameters
('lexer            global_lexer
    language column lang
    wordlist         my_wordlist')
EXEC DBMS_STATS.GATHER_TABLE_STATS (USER, 'NEWS')
COLUMN short_content FORMAT A30
ALTER SESSION SET NLS_LANGUAGE = 'AMERICAN'
set timing on
select * from news
where contains (short_content, '$drive') > 0
select * from news
where contains (short_content, '$drove') > 0
ALTER SESSION SET NLS_LANGUAGE = 'GERMAN'
select * from news
where contains (short_content, '$fahr') > 0
select * from news
where contains (short_content, '$fuhr') > 0
/

Cascading Select Lists - Not Working for me

I am trying to implement Denes Kubicek's Ajax Cascading Select List solution.
http://apex.oracle.com/pls/otn/f?p=31517:119
But it is not working for me.
I'm a newbie to APEX and checked the forum for advice on cascading select lists. I saw the thread for
"Cascading Select Lists - Not Working" posted by sue and the replies by Varad Acharya, but I'm still
having issues of not seeing the alerts, not able to run the pl/sql process in SQL Workshop, and not
getting the expected results.
I have a list of countries (US - USA, CA - CANADA, etc.) and a list of states for each country. When a
user selects a country I would like to show the list of states within that country.
This is what I've done so far:
Defined an application process:
Process Point: On Demand: Run ... by a page process.
Name: CASCADING_SELECT_LIST1
Process Text:
BEGIN
OWA_UTIL.mime_header ('text/xml', FALSE);
HTP.p ('Cache-Control: no-cache');
HTP.p ('Pragma: no-cache');
OWA_UTIL.http_header_close;
HTP.prn ('<select>');
HTP.prn ('<option value="' || 99 || '">' || '- All States -'
|| '</option>'
FOR c IN (SELECT state_code || ' - ' || state_desc d, state_code r
FROM tbk_state
WHERE country_code = :cascading_selectlist_item_1)
LOOP
HTP.prn ('<option value="' || c.r || '">' || c.d || '</option>');
END LOOP;
HTP.prn ('</select>');
END;
defined and application item:
Name: CASCADING_SELECTLIST_ITEM_1
Build Option: - No Build Option -
Created a 'Form on a table with report' as follows:
Page 5: Report on TBK_HARDWARE_LOCATION
Page 6: Form on TBK_HARDWARE_LOCATION
in HTML Header of the page attributes for 'Form on TBK_HARDWARE_LOCATION' I have:
<script language="JavaScript" type="text/javascript">

</script>
<script>
function get_select_list_xml1(pThis,pSelect){
var l_Return = null;
var l_Select = html_GetElement(pSelect);
alert ('Dept no=' + pThis.value);
var get = new htmldb_Get(null,html_GetElement('pFlowId').value,
'APPLICATION_PROCESS=CASCADING_SELECT_LIST1',0);
get.add('CASCADING_SELECTLIST_ITEM_1',pThis.value);
gReturn = get.get('XML');
// gReturn = get.get();
alert('Enames=' + gReturn);
if(gReturn && l_Select){
var l_Count = gReturn.getElementsByTagName("option").length;
l_Select.length = 0;
for(var i=0;i<l_Count;i++){
var l_Opt_Xml = gReturn.getElementsByTagName("option");
appendToSelect(l_Select, l_Opt_Xml.getAttribute('value'),
l_Opt_Xml.firstChild.nodeValue)
get = null;
function appendToSelect(pSelect, pValue, pContent) {
var l_Opt = document.createElement("option");
l_Opt.value = pValue;
if(document.all){
pSelect.options.add(l_Opt);
l_Opt.innerText = pContent;
}else{
l_Opt.appendChild(document.createTextNode(pContent));
pSelect.appendChild(l_Opt);
</script>
On Page 6: 'Form on TBK_HARDWARE_LOCATION' I have the following items (plus some others):
Name: P6_COUNTRY_CODE
Display as: Select List
HTML Form Element Attributes: onchange="get_select_list_xml1(this,'P6_STATE_CODE');"
Source Used: Only when current value in session state is null
Source Type: Database Column
maintain session state: Per session
Source value or expression: COUNTRY_CODE
Named LOV: LIST OF COUNTRIES
Name: P6_STATE_CODE
Display as: Select List
Source Used: Only when current value in session state is null
Source Type: Database Column
maintain session state: Per session
Source value or expression: STATE_CODE
Named LOV: - Select named LOV -
List of Values definition:
     select state_code || ' - ' || state_desc d, state_code r
     from tbk_state
     where country_code = :P6_COUNTRY_CODE
     order by 1
LIST OF COUNTRIES is defined as:
select country_code || ' - ' || country_desc d, country_code r
from tbk_country
order by 1
Now to the problem:
I run page 5 (the report) to see the list of locations and then I try to edit a record (page 6). When I
try to select a different country I get the following error (on IE):
"Problems with this web page might prevent it from being displayed properly or functioning properly.
In the future, you can display this message by double-clicking the warning icon displayed in the status
bar.
Line: 17
Char: 5
Error: Object expected
Code: 0
URL: http//cmrac4.cm.timeinc.com:7777/pls/htmldb/f?
p=114:6:1413254636072443110::::P6_HARDWARE_LOCATION_ID:2
I don't see any of the alert messages.
I also tried to run the application process code in the SQL - Command Processor (I replaced
:cascading_selectlist_item_1 with 'CA' or 'US') and got the following:
The XML page cannot be displayed
Cannot view XML input using XSL style sheet. Please correct the error and then click the Refresh
button, or try again later.
Only one top level element is allowed in an XML document. Error processing resource
'http://cmrac4.cm.timeinc.com:7777/pls/...
<select><option value="99">- All States -</option><option value="X1">X1 - X1</option><optio...
Can someone help me please?

Varad,
First, thank you for taking the time to try to help me with this problem.
When I view the page's source code (here are the first few lines):
<html lang="en-us">
<head>
<script src="/i/javascript/core.js" type="text/javascript"></script>
<link rel="stylesheet" href="/i/css/core.css" type="text/css" />
<script language="JavaScript" type="text/javascript">

</script>
<script>
function get_select_list_xml1(pThis,pSelect){
var l_Return = null;
var l_Select = html_GetElement(pSelect);
//alert ('Dept no=' + pThis.value);
var get = new htmldb_Get(null,html_GetElement('pFlowId').value,
'APPLICATION_PROCESS=CASCADING_SELECT_LIST1',0);
get.add('CASCADING_SELECTLIST_ITEM_1',pThis.value);
gReturn = get.get('XML');
// gReturn = get.get();
//alert('Enames=' + gReturn);
if(gReturn && l_Select){
var l_Count = gReturn.getElementsByTagName("option").length;
l_Select.length = 0;
for(var i=0;i<l_Count;i++){
var l_Opt_Xml = gReturn.getElementsByTagName("option");
appendToSelect(l_Select, l_Opt_Xml.getAttribute('value'),
l_Opt_Xml.firstChild.nodeValue);
get = null;
function appendToSelect(pSelect, pValue, pContent) {
var l_Opt = document.createElement("option");
l_Opt.value = pValue;
if(document.all){
pSelect.options.add(l_Opt);
l_Opt.innerText = pContent;
}else{
l_Opt.appendChild(document.createTextNode(pContent));
pSelect.appendChild(l_Opt);
</script>
It looks like line 17 is:
var l_Select = html_GetElement(pSelect);
I'm still not sure why I'm getting this error and why it's not working?
Thanks,
Eti

Urgent clearing data in container for free text

I HAVE A CONTAINER FOR FREE TEXT.
I HAVE A CREATE BUTTON IN MY SCREEN EWHEN I PRESS CREATE IT ASKD FOR ID AND FREE TEXT THEN I SAVE AND IT GETS SAVED IN A ZTALE TABLE.
WHEN AFTER SAVING IT I GO TO INITIAL SCREEN AND PRESS CREATE AGAIN THEN IT ASKS FOR ID AND IN THE CONTAINER I SEE THE FPREVIOUS TEXT.
CAN YOU GUYS LET ME KNOW AS TO WHAT I NEED TO DO.
I TREID CLEARING AND REFRESHING MYTABLE WHICH I HAVE USED IN THE FOLLOWING CODE.
pbo
if editor is initial.
CREATE OBJECT TEXTEDIT_CUSTOM_CONTAINER
EXPORTING
CONTAINER_NAME = 'TEXTEDITOR1'
EXCEPTIONS
CNTL_ERROR = 1
CNTL_SYSTEM_ERROR = 2
CREATE_ERROR = 3
LIFETIME_ERROR = 4
LIFETIME_DYNPRO_DYNPRO_LINK = 5.
IF SY-SUBRC NE 0.
add your handling
ENDIF.
CREATE OBJECT EDITOR
EXPORTING
PARENT = TEXTEDIT_CUSTOM_CONTAINER
WORDWRAP_MODE = CL_GUI_TEXTEDIT=>WORDWRAP_AT_FIXED_POSITION
WORDWRAP_TO_LINEBREAK_MODE = CL_GUI_TEXTEDIT=>FALSE
EXCEPTIONS
OTHERS = 1.
refresh mytable.
call METHOD editor->SET_TOOLBAR_MODE
EXPORTING TOOLBAR_MODE = 0.
*call METHOD editor->SET_ENABLE
*EXPORTING ENABLE = ' '.
CALL METHOD editor->set_readonly_mode
EXPORTING
readonly_mode = 1.
ENDIF.
CLEAR MYTABLE.
FREE MYTABLE.
endif.
IF SY-SUBRC NE 0.
CALL FUNCTION 'POPUP_TO_INFORM'
EXPORTING
TITEL = V_REPID "--> program name
TXT2 = SPACE
TXT1 = 'Error in flush'.
ENDIF.
tHANKS
let me know
swathi

For example, this program works really well with saving long text using the SAVE_TEXT function. Here you need to create the object/id in SE75. For this program you enter the id on the right like 999999 and enter the text on the left, execute and the text is saved, now change the id to 999998 and hit enter, notice the text is blank, now enter 999999 again, notice the text for this id has come back, this is because the program uses READ_TEXT to retrieve the text.
report zrich_0001.
data:
      dockingleft type ref to cl_gui_docking_container,
      text_editor    type ref to cl_gui_textedit,
      repid type syrepid.
data: begin of header.
        include structure thead.
data: end of header.
data: begin of lines occurs 0.
        include structure tline.
data: end of lines.
data: textlines type table of tline-tdline,
      wa_text type tline-tdline.
data: xthead type thead.
parameters: p_id(10) type c.
at selection-screen.
if p_id is initial.
    message e001(00) with 'Enter an ID'.
endif.
at selection-screen output.
repid = sy-repid.
if dockingleft is initial.
    create object dockingleft
                exporting repid     = repid
                          dynnr     = sy-dynnr
                          side      = dockingleft->dock_at_left
                          extension = 300.
    create object text_editor
                exporting
                     parent     = dockingleft.
endif.
if p_id <> space.
    xthead-tdobject = 'ZPT_DET'.
    xthead-tdid     = 'Z001'.
    xthead-tdname = p_id.
    clear lines. refresh lines.
    call function 'READ_TEXT'
      exporting
        id                            = xthead-tdid
        language                      = sy-langu
        name                          = xthead-tdname
        object                        = xthead-tdobject
      tables
        lines                         = lines
     exceptions
       id                            = 1
       language                      = 2
       name                          = 3
       not_found                     = 4
       object                        = 5
       reference_check               = 6
       wrong_access_to_archive       = 7
       others                        = 8.
    clear textlines.
    loop at lines.
      wa_text = lines-tdline.
      append wa_text to textlines.
    endloop.
endif.
call method text_editor->set_text_as_r3table
     exporting
           table              = textlines
     exceptions
           others             = 1.
start-of-selection.
call method text_editor->get_text_as_r3table
     importing
           table              = textlines
     exceptions
           others             = 1.
* Set SAPscript Header
clear header.
header-tdname = p_id .         "Name
header-tdobject = 'ZPT_DET'.       "Object
header-tdid = 'Z001'.              "Id
header-tdspras = sy-langu.
* Move text from container to function module table
clear lines. refresh lines.
loop at textlines into wa_text .
    lines-tdline = wa_text.
    append lines .
endloop.
call function 'SAVE_TEXT'
       exporting
            client   = sy-mandt
            header   = header
       tables
            lines    = lines
       exceptions
            id       = 1
            language = 2
            name     = 3
            object   = 4
            others   = 5.
Yes, this is implemented using a selection screen, but the same principals apply and this can be easily converted to a dynpro application.
Regards,
Rich Heilman

Search Bar is not working for me in windows 7 32 bit OS

Search Bar is not working for me in windows 7 32 bit OS'''bold text'''

Hi Sameer,
There's no version of Windows Vista that is supported, regardless of service packs. You can always upgrade to Windows 7, though.
Your other option is to use Brackets, the open source editor that Edge Code is based on. It still supports Vista for now. The downside is that Brackets lacks some features of Edge Code: Kuler integration, Edge Inspect integration, and Edge Web Fonts code hints -- although all of those except Kuler are offered as optional Brackets extensions too (you just have to install them).
Hope that helps,
- Peter

RequestFocus() not working for JTextArea

requestFocus() is not working for JTextArea.
A validation message is displayed and when clicked on 'ok', requestFocus() does not work. Cursor is not shown in the text
area.
Any suggestions/solutions pls?

here is the sample code:
public boolean checkData()
String comment = commentArea.getText().trim();
if( comment.length() < MN_COMMENT || comment.length() > MX_COMMENT )
showError(COMMENT_ALERT);
commentArea.requestFocus();
return false;
return true;
Focus is lost. TextArea is in scroll pane. Scroll pane is contanined in a container pane and pane is for JDialog.
RequestFocus() is working for JRE 1.5.0_07. But its not working for JRE 1.5.0_0 and lower versions.

Tacacs not working for 5508

Tacacs not working for 3 new 5508 WLC's...working fine for 6 old 4400 WLC's.
before 7.116 code upgrade...I remember 5508 was working on and off and now they are not.
Same configs on SW, WLC and ACS.
Debug on WLC gives..below message when Tacacs is attempted..
*aaaQueueReader: Oct 25 09:20:41.700: tplus_processAuthRequest: memory alloc failed for tplus
Any pointers for troubleshooting? Not sure why statistics show zero...?? Radius is working for users.
(wlc03) >show tacacs auth statistics
Authentication Servers:
Server Index..................................... 1
Server Address................................... 10.3.121.21
Msg Round Trip Time.............................. 0 (msec)
First Requests................................... 0
Retry Requests................................... 0
Accept Responses................................. 0
Reject Responses................................. 0
Error Responses.................................. 0
Restart Responses................................ 0
Follow Responses................................. 0
GetData Responses................................ 0
Encrypt no secret Responses...................... 0
Challenge Responses.............................. 0
Malformed Msgs................................... 0
Bad Authenticator Msgs........................... 0
Timeout Requests................................. 0
Unknowntype Msgs................................. 0
Other Drops...................................... 0
Server Index..................................... 2
--More-- or (q)uit
Server Address................................... 10.3.121.22
Msg Round Trip Time.............................. 0 (msec)
First Requests................................... 0
Retry Requests................................... 0
Accept Responses................................. 0
Reject Responses................................. 0
Error Responses.................................. 0
Restart Responses................................ 0
Follow Responses................................. 0
GetData Responses................................ 0
Encrypt no secret Responses...................... 0
Challenge Responses.............................. 0
Malformed Msgs................................... 0
Bad Authenticator Msgs........................... 0
Timeout Requests................................. 0
Unknowntype Msgs................................. 0
Other Drops...................................... 0
(wlc03) >show tacacs summary
Authentication Servers
Idx Server Address    Port    State     Tout
1    10.3.121.21     49      Enabled   5
2    10.3.121.22      49      Enabled   5
Authorization Servers
Idx Server Address    Port    State     Tout
1    10.3.121.21      49      Enabled   30
2    10.3.121.22     49      Enabled   5
Accounting Servers
Idx Server Address    Port    State     Tout
1    10.3.121.21      49      Enabled   5
We can ping the TACACS servers...

>show memory statistics
System Memory Statistics:
Total System Memory............: 1028820992 bytes
Used System Memory.............: 458424320 bytes
Free System Memory.............: 570396672 bytes
Bytes allocated from RTOS......: 21939008 bytes
Chunks Free....................: 29 bytes
Number of mmapped regions......: 45
Total space in mmapped regions.: 212779008 bytes
Total allocated space..........: 12015112 bytes
Total non-inuse space..........: 9923896 bytes
Top-most releasable space......: 133800 bytes
Total allocated (incl mmap)....: 234718016 bytes
Total used (incl mmap).........: 224794120 bytes
Total free (incl mmap).........: 9923896 bytes
show buffers
Pool[00]: 16 byte chunks
    chunks in pool:    50000
    chunks in use:     19030
    bytes in use:      304480
    bytes requested:   90479 (214001 overhead bytes)
Pool[01]: 64 byte chunks
    chunks in pool:    40000
    chunks in use:     14519
    bytes in use:      929216
    bytes requested:   566395 (362821 overhead bytes)
Pool[02]: 128 byte chunks
    chunks in pool:    20000
    chunks in use:     7726
    bytes in use:      988928
    bytes requested:   672853 (316075 overhead bytes)
Pool[03]: 256 byte chunks
    chunks in pool:    4000
    chunks in use:     808
    bytes in use:      206848
    bytes requested:   154777 (52071 overhead bytes)
Pool[04]: 1024 byte chunks
--More-- or (q)uit
    chunks in pool:    15300
    chunks in use:     11645
    bytes in use:      11924480
    bytes requested:   4945714 (6978766 overhead bytes)
Pool[05]: 2048 byte chunks
    chunks in pool:    1000
    chunks in use:     189
    bytes in use:      387072
    bytes requested:   355272 (31800 overhead bytes)
Pool[06]: 4096 byte chunks
    chunks in pool:    1000
    chunks in use:     36
    bytes in use:      147456
    bytes requested:   102479 (44977 overhead bytes)
Raw Pool:
    chunks in use:     186
    bytes requested:   156052303
show process memory
Name               Priority       BytesInUse BlocksInUse    Reaper
cslStoreManager    (240/ 7)              0            0      ( 0/ 0)%
System Reset Task (240/ 7)              0            0      ( 0/ 0)%
reaperWatcher      ( 3/ 96)              0            0      ( 0/ 0)%   I
osapiReaper        ( 10/ 94)              0            0      ( 0/ 0)%   I
TempStatus         (240/ 7)            424            1      ( 0/ 0)%   I
pktDebugSocketTask (255/ 1)              0            0      ( 0/ 0)%
LICENSE AGENT      (240/ 7)           2228           85      ( 0/ 0)%   I
emWeb              ( 7/ 95)        1235795        20743      ( 0/ 0)%   T 300
webJavaTask        (240/ 7)              0            0      ( 0/ 0)%
fmcHsTask          (100/ 60)              0            0      ( 0/ 0)%
apstatEngineTask   (240/ 7)              0            0      ( 0/ 0)%
rrcEngineTask      (240/ 7)              0            0      ( 0/ 0)%
spectrumDataTask   (255/ 1)        1614480           12      ( 0/ 0)%
spectrumNMSPTask   (255/ 1)          28808            3      ( 0/ 0)%
wipsTask           (240/ 7)              0            0      ( 0/ 0)%
tsmTask            (255/ 1)              0            0      ( 0/ 0)%
cids-cl Task       (240/ 7)              0            0      ( 0/ 0)%
ethoipSocketTask   ( 7/ 95)              0            0      ( 0/ 0)%
ethoipOsapiMsgRcv (240/ 7)              0            0      ( 0/ 0)%
--More-- or (q)uit
envCtrollerStatus (240/ 7)              0            0      ( 0/ 0)%
rfidTask           (240/ 7)              0            0      ( 0/ 0)%
idsTrackEventTask (239/ 8)              0            0      ( 0/ 0)%
DHCP Server        (240/ 7)              0            0      ( 0/ 0)%
bcastReceiveTask   (240/ 7)              0            0      ( 0/ 0)%
ProcessLoggingTask (240/ 7)              0            0      ( 0/ 0)%
CDP Main           (240/ 7)           3100           13      ( 0/ 0)%
sntpMainTask       (240/ 7)              0            0      ( 0/ 0)%
sntpReceiveTask    (240/ 7)              0            0      ( 0/ 0)%
cdpSocketTask      (240/ 7)              0            0      ( 0/ 0)%
grouping Task      (255/ 1)              0            0      ( 0/ 0)%
dot11a             (255/ 1)             63            3      ( 0/ 0)%
rrm Socket Task    ( 1/ 97)          35024            1      ( 0/ 0)%
rrm Socket Task    (255/ 1)          35024            1      ( 0/ 0)%
dot11a             (255/ 1)              0            0      ( 0/ 0)%
grouping Task      (255/ 1)              0            0      ( 0/ 0)%
dot11b             (255/ 1)            105            5      ( 0/ 0)%
rrm Socket Task    (255/ 1)          35024            1      ( 0/ 0)%
dot11b             (255/ 1)              0            0      ( 0/ 0)%
rrm Socket Task    (255/ 1)          35024            1      ( 0/ 0)%
apfPmkCacheTimer   (240/ 7)              0            0      ( 0/ 0)%
Apf Guest          (240/ 7)              0            0      ( 0/ 0)%
RLDP Schedule Task (240/ 7)              0            0      ( 0/ 0)%
--More-- or (q)uit
apfMsConnTask_5    (175/ 32)              0            0      ( 0/ 0)%
apfMsConnTask_4    (175/ 32)              0            0      ( 0/ 0)%
apfMsConnTask_6    (175/ 32)              0            0      ( 0/ 0)%
apfMsConnTask_7    (175/ 32)              0            0      ( 0/ 0)%
apfMsConnTask_3    (175/ 32)              0            0      ( 0/ 0)%
apfMsConnTask_2    (175/ 32)              0            0      ( 0/ 0)%
apfLbsTask         (240/ 7)              0            0      ( 0/ 0)%
apfMsConnTask_0    (175/ 32)              0            0      ( 0/ 0)%
apfMsConnTask_1    (175/ 32)              0            0      ( 0/ 0)%
apfProbeThread     (200/ 22)              0            0      ( 0/ 0)%
apfOrphanSocketTas (240/ 7)              0            0      ( 0/ 0)%
apfRogueDetectorTh (175/ 32)              0            0      ( 0/ 0)%
apfRogueTask       (240/ 7)              0            0      ( 0/ 0)%
apfOpenDtlSocket   (175/ 32)              0            0      ( 0/ 0)%
apfRLDP            (175/ 32)            424            1      ( 0/ 0)%
apfRLDPRecv        (175/ 32)              0            0      ( 0/ 0)%
apfReceiveTask     (175/ 32)              0            0      ( 0/ 0)%
mmMfpTask          (175/ 32)              0            0      ( 0/ 0)%
mmMobility         (240/ 7)           1272            3      ( 0/ 0)%
mmSSHPeerRegister (240/ 7)              0            0      ( 0/ 0)%
mmListen           (180/ 30)          99920          227      ( 0/ 0)%
tplusTransportThre (201/ 22)              0            0      ( 0/ 0)%
radiusCoASupportTr (201/ 22)              0            0      ( 0/ 0)%
--More-- or (q)uit
EAP Framework      (240/ 7)              0            0      ( 0/ 0)%
aaaQueueReader     (225/ 13)           3518           12      ( 0/ 0)%
radiusRFC3576Trans (201/ 22)              0            0      ( 0/ 0)%
radiusTransportThr (201/ 22)              0            0      ( 0/ 0)%
pemReceiveTask     (240/ 7)              0            0      ( 0/ 0)%
iappSocketTask     (240/ 7)              0            0      ( 0/ 0)%
ccxRmTask          (230/ 11)              0            0      ( 0/ 0)%
ccxS69Task         (240/ 7)            424            1      ( 0/ 0)%
ccxDiagTask        (240/ 7)              0            0      ( 0/ 0)%
ccxL2RoamTask      (240/ 7)         240424            3      ( 0/ 0)%
dot1xSocketTask    (240/ 7)              0            0      ( 0/ 0)%
Dot1x_NW_MsgTask_7 (240/ 7)              0            0      ( 0/ 0)%
Dot1x_NW_MsgTask_6 (240/ 7)              0            0      ( 0/ 0)%
Dot1x_NW_MsgTask_2 (240/ 7)              0            0      ( 0/ 0)%
Dot1x_NW_MsgTask_3 (240/ 7)              0            0      ( 0/ 0)%
Dot1x_NW_MsgTask_4 (240/ 7)              0            0      ( 0/ 0)%
Dot1x_NW_MsgTask_5 (240/ 7)              0            0      ( 0/ 0)%
Dot1x_NW_MsgTask_1 (240/ 7)              0            0      ( 0/ 0)%
Dot1x_NW_MsgTask_0 (240/ 7)            424            1      ( 0/ 0)%
dot1xMsgTask       (240/ 7)              0            0      ( 0/ 0)%
locpTxServerTask   (220/ 15)            408            2      ( 0/ 0)%
locpRxServerTask   (200/ 22)         428043         1961      ( 0/ 0)%
capwapSocketTask   ( 72/ 70)         303104          148      ( 0/ 0)%
--More-- or (q)uit
spamApTask6        (118/ 53)          25929           63      ( 0/ 0)%
spamApTask7        ( 53/ 78)          24233           59      ( 0/ 0)%
spamApTask5        (118/ 53)          23445           61      ( 0/ 0)%
spamApTask4        (118/ 53)          23513           58      ( 0/ 0)%
spamApTask3        (118/ 53)          19569           48      ( 0/ 0)%
spamApTask2        ( 53/ 78)          23809           58      ( 0/ 0)%
spamApTask1        ( 53/ 78)          22961           56      ( 0/ 0)%
spamApTask0        ( 78/ 68)          39189          106      ( 0/ 0)%
spamReceiveTask    (120/ 52)        2204024          252      ( 0/ 0)%
spamSocketTask     ( 32/ 85)              0            0      ( 0/ 0)%
Image License brok (240/ 7)              0            0      ( 0/ 0)%   I
Image License brok (240/ 7)             28            1      ( 0/ 0)%   I
IPC Main Thread    (240/ 7)              0            0      ( 0/ 0)%   I
License Client Lib (240/ 7)             96            1      ( 0/ 0)%   I
sshpmLscScepTask   (100/ 60)              0            0      ( 0/ 0)%
License Client Lib (240/ 7)             96            1      ( 0/ 0)%   I
sshpmLscTask       (100/ 60)          25783         1739      ( 0/ 0)%
sshpmReceiveTask   (175/ 32)           6697           66      ( 0/ 0)%
sshpmMainTask      (100/ 60)         208440          358      ( 0/ 0)%
mfpKeyRefreshTask (255/ 1)              0            0      ( 0/ 0)%
mfpEventTask       (255/ 1)              0            0      ( 0/ 0)%
mfpTrapForwardTask (255/ 1)              0            0      ( 0/ 0)%
clientTroubleShoot (100/ 60)        2841248            4      ( 0/ 0)%
--More-- or (q)uit
loggerMainTask     (200/ 22)              0            0      ( 0/ 0)%
debugMainTask      (200/ 22)              0            0      ( 0/ 0)%
dot3ad_lac_task    (240/ 7)          32901            3      ( 0/ 0)%
gccp_t             (240/ 7)           5864            5      ( 0/ 0)%
dot1dTimer         (240/ 7)              0            0      ( 0/ 0)%   T 300
dot1dRecv          (250/ 3)              0            0      ( 0/ 0)%
uart_session       (240/ 7)              0            0      ( 0/ 0)%
StatsTask          (240/ 7)              0            0      ( 0/ 0)%
fdbTask            (240/ 7)              0            0      ( 0/ 0)%
broffu_SocketRecei (100/ 60)             13            1      ( 0/ 0)%
SNMPProcMon        (240/ 7)              0            0      ( 0/ 0)%   T 300
RMONTask           ( 71/ 71)              0            0      ( 0/ 0)%   I
SNMPTask           (240/ 7)          61089         1064      ( 0/ 0)%
DHCP Socket Task   (240/ 7)              0            0      ( 0/ 0)%
DHCP Proxy Task    (240/ 7)              0            0      ( 0/ 0)%
dhcpClientTimerTas (240/ 7)              0            0      ( 0/ 0)%
DHCP Client Task   (240/ 7)              0            0      ( 0/ 0)%   T 600
BootP              (240/ 7)              0            0      ( 0/ 0)%   T 300
TransferTask       (240/ 7)            848            2      ( 0/ 0)%   I
osapiTimer         (100/ 60)          13024            2      ( 0/ 0)%   T 300
nim_t              (100/ 60)           2447            3      ( 0/ 0)%
dtlArpTask         ( 7/ 95)          98436            3      ( 0/ 0)%
dtlTask            (100/ 60)          41089           20      ( 0/ 0)%
--More-- or (q)uit
dtlDataLowTask     ( 7/ 95)              0            0      ( 0/ 0)%
sysapiprintf       (240/ 7)          22657            3      ( 0/ 0)%
osapiBsnTimer      ( 95/ 62)              0            0      ( 0/ 0)%
fp_main_task       (240/ 7)       153068796        26868      ( 0/ 0)%

What's This Help not working for one entry in each header file

I have a large RoboHelp project that I have imported into Version 8 from a previous version. Prior to the import into Version 8, all of the What's This Help in the project was working perfectly; now, post-import, I have a problem.
Firstly, some background information.
My project contains a large number of individual header (.H) files, one for each dialog within the software. These header files, which have been generated and provided by our developers, contain one entry for each field on the dialog to which the header file relates. The header files are all contained within a \HTML Topics\Fields\ folder (going from the root of my Help project).
Each header file has a corresponding text (.TXT) file. These text files contain entries that correspond to the entries in the relevant header file. The text files are also contained within the \HTML Topics\Fields\ folder.
Below is an example of the contents of a header file:
#define IDH_HIERARCHY_APPEARANCE_HIEARCHY_LIST          16811
#define IDH_HIERARCHY_APPEARANCE_ADD_APPEARANCE         16812
#define IDH_HIERARCHY_APPEARANCE_REMOVE_APPEARANCE      16813
Below is the contents of the corresponding text file:
.topic IDH_HIERARCHY_APPEARANCE_ADD_APPEARANCE
Click this button to add a new row of hierarchical appearance settings to the grid.
.topic IDH_HIERARCHY_APPEARANCE_HIEARCHY_LIST
Use this grid to define hierarchy appearance settings. Each row in the grid represents a level of the hierarchy. For example, the appearance settings you define for the first row apply to the top level of hierarchy, the settings you define for the second row apply to the second level, and so on.
.topic IDH_HIERARCHY_APPEARANCE_REMOVE_APPEARANCE
Click this button to delete the selected row of hierarchical appearance settings from the grid.
The What's This Help that was part of the original project still works perfectly. However, after upgrading the project to RoboHelp Version 8, I have had to update the project to reflect changes to the software. As part of this work, I have imported some new header files and updated some existing ones - and edited the corresponding text files accordingly.
The What's This Help that is covered by the header files that I have imported since the upgrade to RoboHelp Version 8 does not work correctly; in each case, the What's This Help does not work for whichever field appears at the top of the appropriate text file. The position of the entry in the corresponding header file does not make a difference.
If I manually edit a text file to move a different entry to the top then recompile the Help project, the What's This Help does not work for the field that now appears at the top of the text file - and the What's This Help for the field that used to appear at the top of the text file now works.
I've tried everything I can think of to fix this, but nothing has worked. It seems as if there is a problem in the way RoboHelp is compiling the header and text files.
If I use Microsoft HTML Help Workshop to decompile the CHM file, then view the contents of the resulting, decompiled text files, the affected files appear as follows:
.topic IDH_HIERARCHY_APPEARANCE_ADD_APPEARANCE
Click this button to add a new row of hierarchical appearance settings to the grid.
.topic 16811
Use this grid to define hierarchy appearance settings. Each row in the grid represents a level of the hierarchy. For example, the appearance settings you define for the first row apply to the top level of hierarchy, the settings you define for the second row apply
to the second level, and so on.
.topic 16813
Click this button to delete the selected row of hierarchical appearance settings from the grid.
Note how the entry at the top - which relates to the What's This Help that doesn't work - appears differently to the other entries which do work. The name of the ID appears after ".topic" rather than the appropriate ID number.
Any help that anyone can provide me with would be very much appreciated.
Thank you,
Mark

Its working now. We just kept trying to reinstall the tools and restarting indesign. On the 4th time the buttons started working. I can't explain why it finally worked, just that it is working now.

Drill down is not working for Pivot tables,but working for chart

I have two reports and trying to navigate betwen summary report to detail report. But details report is displaying all the records .The filter condition is not working and displaying all the filters .I have Case statement in my filter.But the summary report column where the filter condition is applied is aggregated in the RPD level. Does this might be the reason ?. Is it passing different type of data type to details report ?. The filter condition is not working for Pivot table .But Chart is working fine and displaying the only selected records based on the filter condition.
Please help me with the below issue.

Hi sil174sss,
Per my understanding you are experiencing the issue with the excel report which have add the drill down action, after export to excel only the expanded nodes included and the collapsed nodes is not shown, right?
Generally, if we expand the nodes before export to excel then the excel will display the expanded details row and keep collapsed the details row which haven't expand, but we have the toggle "+","-" on the left of the Excel to help
control the expand and collapse, when you click the "+" you can expand the collapsed notes to see the details rows.
I have tested on my local environment with different version of SSRS and can always see the "+","-" as below:
On the Top left corner you can find the "1","2", this help to control the "Collapse All" and "Expand All".
If you can't see the "+","-" in the excel, the issue can be caused by the Excel version you are currently using, and also excel have limit support of this, please provide us the Excel version information and the SSRS version. You
can reference to this similar thread:
lost collapsing columns when export to excel
Please try to export other drill down report to excel and check if they work fine, if they did, the issue can be caused by the drill down action you have added in this report is not correctly, if possible, please try to redesign the report.
Article below about how to add Expand/Collapse Action to an Item for your reference:
http://msdn.microsoft.com/en-us/library/dd220405.aspx
If your problem still exists, please feel free to ask
Regards
Vicky Liu

Does br Not work for Safari Browser?

Using Safari on Vista
If you look here http://www.banquettables.pro/ When you add an item to the cart, there is a shopping cart that appears using ajax in the right column.
THIS Text Below shows up.
You may checkout online securely, or call and order 866-290-0813
We Accept Visa, MC, Discover, and AMEX.
BUT the thing is , there is a
between the 2 sentences to make a space. This works in all browsers but safari.
Does
NOT work for safari?

A BR tag just makes a line break, not an extra space between lines. It seems to be working fine in Safari. Perhaps a paragraph break <p /> i s what you want.

MN04 not working for free text PO

Similar Messages

Maybe you are looking for