MOBI with BOE and mobile server on different servers
Hi Experts,
We need to set up a BO MOBI with BOE and Mobile server on two separate servers.
In such a configuration, how does the two servers communicate?
What should be the VAS and VMS server configurations? especially the external hostnames in the files?
We are looking for a non Blackberry(proxy) deployment.
We have installed the software,however the windows services of Authserver and the Job servers are not available in the mobile server instance
Any help would be highly appreciated.
I figured it out. I had to re-run the schconfig utility on UNIX and reconfigured the server from localhost:9710 to the actual server name.
Similar Messages
-
BO MOBI with BOE and Mobile server on two separate servers
Hi Experts,
We need to set up a BO MOBI with BOE and Mobile server on two separate servers.
In such a configuration, how does the two servers communicate?
What should be the VAS and VMS server configurations? especially the external hostnames in the files?
We are looking for a non Blackberry(proxy) deployment.
We have installed the software,however the windows services of Authserver and the Job servers are not available in the mobile server instance
Any help would be highly appreciated.Hi Experts,
We need to set up a BO MOBI with BOE and Mobile server on two separate servers.
In such a configuration, how does the two servers communicate?
What should be the VAS and VMS server configurations? especially the external hostnames in the files?
We are looking for a non Blackberry(proxy) deployment.
We have installed the software,however the windows services of Authserver and the Job servers are not available in the mobile server instance
Any help would be highly appreciated. -
BI Schedule and Presenation Server on Different Servers Configuration
I'm having a problem getting my iBots to run and deliver the information to the catalog with the following configuration:
2 Presentation Servers on Windows with IIS for NTLM authentication (via a Load Balancer)
OBIEE Server and Scheduler, and Presenation Server on Solaris (the Presentation Server on Solaris will be turned off)
The catalog between the 2 Windows Servers are are shared. When I create an iBot on the Windows the request is sent to the Scheduler on Solaris and errors out with the following message:
[nQSError: 77006] Oracle BI Presentation Server Error: A fatal error occurred while processing the request. The server responded with: Path not found (
/shared/_ibots/Test Email from UAT)^M
Error Codes: U9KP7Q94^M
My question is why does the scheduler send the alert to the Presentation Server on the Solaris box and not the shared Presentation Server with the shared catalog on the Windows Servers. Am I missing something in the configuration?
Thanks,
ChuckI figured it out. I had to re-run the schconfig utility on UNIX and reconfigured the server from localhost:9710 to the actual server name.
-
PXE boot issue with DHCP and SCCM server on different subnets
I'm working with a client on the operating system deployment module of SCCM.
Their network configuration currently has a single large subnet for client
computers with a DHCP server on the same subnet. The SCCM subnet is
configured on a seperate subnet with no DHCP server on the subnet. We want to
configure client computers to be able to boot using the PXE client to deploy
OS images to the machines but can not get PXE-boot to work correctly.
Also, the client does not want to make changes to their network
infrastructure routers or switches to remedy this problem. Are there settings
on the DHCP or SCCM servers we can implement to make this work? If so, what
needs to be installed or configured on each server. We currently already have
WDS installed on the SCCM server and the SCCM server is configured as a PXE
Service Point within SCCM. Both WDS and the PXE Service Point seem to be working fine.
Any help would be appreciated.
Thanks,
GaryI am Brazilian,
sorry for wrong english
My DHCP is on linux,
in my own structure VLANS
The system center is on the network
10.0.4.0/24
The machines on the network 10.0.5.0/24
The problem is that the machines that
are not on the same network system center
can not boot
I tried configuring / etc/dhcp3/dhcpd.conf
follows
option vendor-class-identifier "PXEClient";
option bootfile-name "\
\ SMSBOOT \ \ x86 \
\ wdsnbp.com";
option tftp-server-name
"10.0.4.101"; ---->
IP server
But it did not work, anyone know
how to configure? -
Database 9i, and Mobile Server install history
Dear Oracle technical representative:
This TAR started out as a true request for help in solving installation problems with Oracle 9i Release 2 Enterprise Edition, and Oracle 9i Mobile Server Release 5.0.1, but it has turned into a history of frustration with out of date, laconic, and often incorrect, and misleading documentation. As a software developer, I understand that documentation is always out of date, at least mine is. Nonetheless, I must speak my mind while understanding, and sympathizing with your situation.
I struggled through the documentation, and managed to get everything working. While I was doing that, I wrote down the step by step procedure that I used to get Database, and Mobile Server running. By sharing this rough install history with you, it is my hope that it will help prevent others from experiencing the same difficulties that I have had. It has been my observation that when a user has problems installing a trial software package they give up quickly, and do not purchase a copy. It is thus extremely important that the installation instructions, and quick start guide be accurate, attentive to detail, and well written. The first impression is the one that counts.
The Oracle 9i Lite Installation, and Configuration Guide for Windows NT shipped with Oracle 9i Lite Release 5.0.1 definitely requires, and emergency rewrite. It is terribly out of date, inaccurate, and laconic. My guess is that it is a very sloppy rewrite of poorly written 8i documentation. The Oracle 9i Database Installation Guide for Windows is somewhat better. It however should do a better job informing you that before installing onto a old server the Microsoft Foundation Class (MFC), and VC runtime libraries must be up to date. The history describes the trouble with not having the MFC42.dll at version 6. Another corker is that the default port the installer presents is 2030, and not 1521, and that leads to major confusion in the both the Database, and Mobile Server installs.
Thank you for looking at the history. I hope that it will be of use to you when you update your documentation.
Thomas G. Matney
Mississippi State University
[email protected]
(662)325-2791
TAR for Oracle 9i Release 2 Database Enterprise Edition, and Oracle Lite Release 5.0.1 Mobile Server
Installation problems are highlighted in red.
Installation sequence/history:
1. Installed Windows NT 4.0 Server SP1 on Dell Power Edge 4300 dual x86 server to wipe the slate clean.
2. Setup TCP/IP, and IPX/SPX networks
Computer name YGGDRASILL
Host name = YGGDRASILL
Domain = CFR.MSSTATE.EDU
Internet name = YGGDRASILL.CFR.MSSATE.EDU = 130.18.130.225
3. Installed NT SP3, and Internet Explorer 4.01 from the NT 40 Options Pack CD as the gateway to installing MTS 2.0, and IIS 4.0.
4. Installed MTS 2.0, and IIS 4.0 from NT 4.0 Optins Pack CD.
5. Applied NT 4.0 SP6.
6. Installed Internet Explorer 5.5 as a prerequisite to installing MADAC 2.6.
7. Installed MDAC 2.6
8. Installed Paint Shop Pro 7 for capturing error screens.
9. As previous install errors stated that the ordinal function xxxx could not be found in MFC42.dll, the latest version (6.0.8665.0) of the dll was installed, and registered from MS VC++ SP5. Also I upgraded MSVCIRT.dll, MSVCRT.dll, MSCRT40.dll, and added MSVC60.dll from SP5 to be on the safe side.
According to the installation documents all the prerequisites for installing Oracle 9i Release 2 Database Enterprise Edition are satisfied.
10. Began install of Oracle Database Enterprise Edition with target parameters:
Home directory = D:\Oracle\Ora92
Database directory = D:\Oracle\oradata
Global database name = FIA.YGGDRASILL.CFR.MSSTATE.EDU
Port = 2030
SID = FIA
SYSTEM Password = phwphw
SYS Password = phwphw
SCOTT Password = phwphw
DBSNMP Password = I left this one unassigned or empty.
tnsnames.ora entry for remote TCP/IP connection
a. CD 1 of 3 load
1. Error writting to MFC42u.dll. Action ignore. A check indicated that MFC42u.dll version did not match the updated version of MFC42.dll. Plan is to update after install. Unicode version of MFC is probably not used by the installer.
b. CD 1 completed with only one problem, and CD 2 load begins.
c. CD 2 installed without incident., and CD 3 load begins, and completes without farther problems. The only issue to address at this time is to update the MFC42u.dll.
HTTP Server URLs
http://7778
https://4443
12. Evaluation of install success begins.
a. Oracle HTTP Service will not start. It is of particular interest that on installs that I do not upgrade the MFC42.dll the Oracle HTTP Service will start correctly, but during the install I get the error message Ordinal nnnn not found in MFC42.dll, and the Oracle MTS Recovery Service crashes during the install. I am caught between a rock and hard spot on this one. See the Figure 1. At the end of this document. I do not need the HTTP Server at this time but I will need it later and this issue must be resolved. It appears that it hangs during startup. I am sorry but I lost the ordinal number nnnn.
When I try to start the HTTP server from the Programs menu. It Hangs, and does not return an error message. See Figure 2, and the included Apache Setup.txt, the install log, and the HTTPd.conf . The conf, and setup files look OK to me. What is the problem?
b. All other services start correctly.
c. Logged into the database as SCOTT on the server with SQL Plus using the connection information:
FIA.CFR.MSSTATE.EDU =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = yggdrasill)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = FIA.YGGDRASILL.CFR.MSSTATE.EDU)
I created some tables, inserted data, and queried for the data. Everthing seems to be working correctly.
d. Logged in remotely from my AOL account on a dial-up line using Oracle 9i Release 2 Personal Edition installed on my ThinkPad. Every thing tested out as above. I used the connection information:
FIA.CFR.MSSTATE.EDU =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = yggdrasill.cfr.msstate.edu)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = FIA.YGGDRASILL.CFR.MSSTATE.EDU)
13. I concluded that except for the Oracle HTTP Server Service not starting correctly, and that after updating the MFC42u.dll to VC++ SP5 level the stage is set for installing Oracle 9i Mobile Server Release 5.0.1. I copied the MFC42u.dll to the server and registered it successfully.
14. As Visual Studio 6.0 Professional updates all of the MFC stuff, I decides to install it at this juncture, and apply SP5.
15. Installed JDK1.3.1 required for Oracle 9i Mobile Server Release 5.0.1
At this time the prerequisites for installing Oracle 9i Mobile Server Release 5.0.1 are satisfied, and MFC, and rt are at version 6.
It is important to note that after installing MS Visual Studio Professional 6.0 SP5, the HTTP server started working. It is clear that prior to installing Oracle Database it is essential that MFC, and possibly other components are upgraded before starting an installation of Oracle. This probably only applies to old NT servers, but it should be mentioned in the installation instructions.
16. Attempt to install Oracle Mobile Server Release 5.0.1
a. File locations Screen
Name: = OraLite501
Path: = D:\OraLite501
b. Select Mobile Server at Installation Screen
c. Mobile Server Repository Database Information Screen
Hostname = YGGDRASILL = hostname from tnsnames.ora
Port = 2030 = same as Database port
It is troublesome that the port in tsnames.ora is 1521, and not 2030 as was specified in the database install. I will try this port on the reinstall. On the retry, it worked. The problem was that I was mislead by the default port of 2030 at the database install. The database was actually installed on port 1521, and I was not given an error message, or warning. As I am a first time installer of Oracle products this threw me for a loop. The default port for the database needs to be 1521, if regardless of what the user specifies for a port you are going to install on port 1521.
Net Service Name = FIA.YGGDRASILL.CFR.MSSTATE.EDU = Global database name as required by installation instructions.
d. Yes. At Do you want to install the Mobile Server Repository question.
e. At Oracle Protocol Support, I checked the SPX box.
f. Summary, and Install screens function to specifications.
g. Mobile Server Repository Wizard
Database System password:
Password = phwphw
h. Mobile Server Repository Wizard
Schema Name: fiafield
Password : fiafield
i. Success at last with the install part. The problem was the wrong port number. See my above comments on this problem, and how Oracle could grease the skids for the next first time installer.
j. I could not find the httpd.conf file in the place the install instructions said it should be for running the Mobile Server in Oracle HTTP Server. Since only one copy of httpd.conf existed, I added the include D:\OraLite501\mobile\server\bin\wtgias.conf to the bottom of the file assuming that it is the correct one. I the re-booted instead of using apache -k restart. The Oracle HTTP Server started, so there is hope. The install instructions state that the httpd.conf file would most likely be in the program files directory, when they are really installed in the Oracle Lite home directory.
k. According to the documentation the Mobile Server should start when the Oracle HTTP Server starts with the wtgias.conf file added to the httpd.conf file. It does not. If I use Process Explorer, I know that Apache loaded the wtgias.conf, because both Apache.exe processes that are running have the wtgias.dll loaded. The facts are at this stage of the game are
1. OraMTSRecoveryService is started
2. OracleOraHome92HTTPService is started
3. OracleOraHome92Listener is started on port
4. OracleServiceFIA is started
5. Apache.exe has the wtgias.dll loaded
6. The Moble Server is not running and it should be if the documentation is correct.
7. If I start the Mobile Server either as a service using wtgsvc -i or with the webtogo command from the DOS prompt, the Mobile Server starts, but when I attempt to log in with the URL http://Yggdrasill:7778/webtogo/startup it inform me the Mobile Server is not started and it is. Figure 3 shows the response I receive from the login attempt.
l. I finally ran the Mobile Server in total debug mode using the command webtogo -d0", and it gave me the subtle hint that the correct URL is
http://Yggdrasill.cfr.msstate.edu/webtogo/startup.
When I use the above URL and I can login to the Mobile Server with UN = fiafield, and PW = fiafield. I was confused by the documentation. I was under the assumption that the host address would be either http://Yggdrasill:7778, or http://Yggdrasill:4443. After all when I, installed Oracle Database these URLs were listed. It needs to be made clear in the installation guide for the mobile server that the Mobile Server address is http://Your servers WWW address/webtogo/startup, and the statements about the Mobile Server will start when the Oracle HTTP Server is started needs to be removed since they are incorrect. Also, the documentation should clearly state that the Schema Name, and Password given in the Repository Wizard Screen are synonymous with the username, and password for the Mobile Server login.
m. After determning the hard way that the Mobile Server does not start when the the Oracle HTTP Server starts, and that the correct URL is http://Internet address/webtogo/startup = http://Yggdrasill.cfr.msstate.edu/webtogo/startup, I decide to start the Mobile Server as a service with the command wtgsvc -i. After I re-booted, to my surprise, I could not login to the Mobile Server. When I checked the system services, the webtogo service was running. So to give the start as a service thing a fair chance I re-booted again, but obtained the same results. I thus concluded that the Mobile Server will not run correctly as a service. As it turns out my conclusion was wrong. After waiting a few minutes, my login try was successful. The documentation should indicate that after booting it may be a minute or two before the Mobile Server service become available.
n. After some serious problems with the installer, and the documentation everything is working. I have a green light to go on to the next stage, which is program the handheld to take advantage of the Mobile Server. I will be glad to get back to programming, and am so thankful that I am not a network administrator.
Appendix
HTTPd.Conf (Abstract only), Apache Setup.txt,
tsnames.ora, and listener.ora.
HTTPd.conf (Abstract only)
# Based upon the NCSA server configuration files originally by Rob McCool.
# Include the Oracle configuration file for custom settings
include "D:\oracle\ora92\Apache\Apache\conf\oracle_apache.conf"
include "D:\OraLite501\mobile\server\bin\wtgias.conf "
tsnames.ora
# TNSNAMES.ORA Network Configuration File: D:\oracle\ora92\network\admin\tnsnames.ora
# Generated by Oracle configuration tools.
INST1_HTTP.CFR.MSSTATE.EDU =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = yggdrasill)(PORT = 1521))
(CONNECT_DATA =
(SERVER = SHARED)
(SERVICE_NAME = MODOSE)
(PRESENTATION = http://HRService)
FIA.CFR.MSSTATE.EDU =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = yggdrasill)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = FIA.YGGDRASILL.CFR.MSSTATE.EDU)
EXTPROC_CONNECTION_DATA.CFR.MSSTATE.EDU =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC0))
(CONNECT_DATA =
(SID = PLSExtProc)
(PRESENTATION = RO)
listener.ora
# LISTENER.ORA Network Configuration File: D:\oracle\ora92\network\admin\listener.ora
# Generated by Oracle configuration tools.
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC0))
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = yggdrasill)(PORT = 1521))
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = D:\oracle\ora92)
(PROGRAM = extproc)
(SID_DESC =
(GLOBAL_DBNAME = FIA.YGGDRASILL.CFR.MSSTATE.EDU)
(ORACLE_HOME = D:\oracle\ora92)
(SID_NAME = FIA)
Apache SetupInfo.txt
The following information is available in:
D:\oracle\ora92\Apache\Apache\setupinfo.txt
The HTTP Server can be accessed using the following URLs:
http://yggdrasill:7778
https://yggdrasill:4443When you install the MD Workstation you are opted to choose among different applications i.e. mobile sales, mobile service, mobile system maintenance or authorization management tool. You can there choose the application to install besides the installation of the MD Workstation.
If you want to add application(s) later, you have to choose 'modify' and choose all parts for the MD Workstation plus the applications. If you omit options chosen before when doing the first installation then these will be removed. So be shure to choose ALL relevant things for the application as well as for the MD Workstation.
You can also generate the application from the installed repository, there are several notes on this subject available ('how to generate an application') which are referred to in about any installation guide or note changing the msa coding.
Regards Kai -
Trying to set up a new DB and Mobile server ....
I have a server runing ora 9i and mobile server 10.2 on linux,
Now trying to change the server to a new one with linux and
Oracle 10.1. and 10.3 as the mobile server.
Did the following steps.
1.All users were logged off in old server
2.stopped mobile server
2. Exported using system full db
3. imported the same to new system
4. Checked ADMIN_JDBC_URL,THIN_JDBC_URL and found the new server settings.
. every thing is fine except mobile server part.
when try to start mobile server it gives following.
[oracle@test bin]$ ./runmobileserver
2008-03-05 11:29:03.169 NOTIFICATION JMS Router is initiating ...
2008-03-05 11:29:04.188 ERROR J2EE HTTP0004 Internal error raised tyring to instantiate web-application: webtogo defined in web site OC4J 10g (10.1.3) Default Web Site. Application: mobileserver does not exist. Error creating Web application: webtogo
08/03/05 11:29:04 Oracle Containers for J2EE 10g (10.1.3.0.0) initialized
Then tryied ./repwizard and it says system does not have required priviledge. But as to the help section all roles were assigned to System.
if anyone has the correct method of transfering the entire db and mobileserver to a new server please post details.
I need to sync clients on the new server without refreshing.
Help is appreciated.Thanks rekounas,
I was out of the office for few days and back again at work.
I made a mistake while running the repwizard.
now its ok.
Problem was i was using mobileadmin to run repwizard.
But i tried it with database schema(back end) user and password now ok and
running on 10g r3. but it does a complete refresh on the new server. that takes time and i think there should be some parameter to make it only fast refresh. -
Oracle 9I Database, and Mobile Server install history
Dear Oracle technical representative:
This TAR started out as a true request for help in solving installation problems with Oracle 9i Release 2 Enterprise Edition, and Oracle 9i Mobile Server Release 5.0.1, but it has turned into a history of frustration with out of date, laconic, and often incorrect, and misleading documentation. As a software developer, I understand that documentation is always out of date, at least mine is. Nonetheless, I must speak my mind while understanding, and sympathizing with your situation.
I struggled through the documentation, and managed to get everything working. While I was doing that, I wrote down the step by step procedure that I used to get Database, and Mobile Server running. By sharing this rough install history with you, it is my hope that it will help prevent others from experiencing the same difficulties that I have had. It has been my observation that when a user has problems installing a trial software package they give up quickly, and do not purchase a copy. It is thus extremely important that the installation instructions, and quick start guide be accurate, attentive to detail, and well written. The first impression is the one that counts.
The Oracle 9i Lite Installation, and Configuration Guide for Windows NT shipped with Oracle 9i Lite Release 5.0.1 definitely requires, and emergency rewrite. It is terribly out of date, inaccurate, and laconic. My guess is that it is a very sloppy rewrite of poorly written 8i documentation. The Oracle 9i Database Installation Guide for Windows is somewhat better. It however should do a better job informing you that before installing onto a old server the Microsoft Foundation Class (MFC), and VC runtime libraries must be up to date. The history describes the trouble with not having the MFC42.dll at version 6. Another corker is that the default port the installer presents is 2030, and not 1521, and that leads to major confusion in the both the Database, and Mobile Server installs.
Thank you for looking at the history. I hope that it will be of use to you when you update your documentation.
Thomas G. Matney
Mississippi State University
[email protected]
(662)325-2791
TAR for Oracle 9i Release 2 Database Enterprise Edition, and Oracle Lite Release 5.0.1 Mobile Server
Installation problems are highlighted in red.
Installation sequence/history:
1. Installed Windows NT 4.0 Server SP1 on Dell Power Edge 4300 dual x86 server to wipe the slate clean.
2. Setup TCP/IP, and IPX/SPX networks
Computer name YGGDRASILL
Host name = YGGDRASILL
Domain = CFR.MSSTATE.EDU
Internet name = YGGDRASILL.CFR.MSSATE.EDU = 130.18.130.225
3. Installed NT SP3, and Internet Explorer 4.01 from the NT 40 Options Pack CD as the gateway to installing MTS 2.0, and IIS 4.0.
4. Installed MTS 2.0, and IIS 4.0 from NT 4.0 Optins Pack CD.
5. Applied NT 4.0 SP6.
6. Installed Internet Explorer 5.5 as a prerequisite to installing MADAC 2.6.
7. Installed MDAC 2.6
8. Installed Paint Shop Pro 7 for capturing error screens.
9. As previous install errors stated that the ordinal function xxxx could not be found in MFC42.dll, the latest version (6.0.8665.0) of the dll was installed, and registered from MS VC++ SP5. Also I upgraded MSVCIRT.dll, MSVCRT.dll, MSCRT40.dll, and added MSVC60.dll from SP5 to be on the safe side.
According to the installation documents all the prerequisites for installing Oracle 9i Release 2 Database Enterprise Edition are satisfied.
10. Began install of Oracle Database Enterprise Edition with target parameters:
Home directory = D:\Oracle\Ora92
Database directory = D:\Oracle\oradata
Global database name = FIA.YGGDRASILL.CFR.MSSTATE.EDU
Port = 2030
SID = FIA
SYSTEM Password = phwphw
SYS Password = phwphw
SCOTT Password = phwphw
DBSNMP Password = I left this one unassigned or empty.
tnsnames.ora entry for remote TCP/IP connection
a. CD 1 of 3 load
1. Error writting to MFC42u.dll. Action ignore. A check indicated that MFC42u.dll version did not match the updated version of MFC42.dll. Plan is to update after install. Unicode version of MFC is probably not used by the installer.
b. CD 1 completed with only one problem, and CD 2 load begins.
c. CD 2 installed without incident., and CD 3 load begins, and completes without farther problems. The only issue to address at this time is to update the MFC42u.dll.
HTTP Server URLs
http://7778
https://4443
12. Evaluation of install success begins.
a. Oracle HTTP Service will not start. It is of particular interest that on installs that I do not upgrade the MFC42.dll the Oracle HTTP Service will start correctly, but during the install I get the error message Ordinal nnnn not found in MFC42.dll, and the Oracle MTS Recovery Service crashes during the install. I am caught between a rock and hard spot on this one. See the Figure 1. At the end of this document. I do not need the HTTP Server at this time but I will need it later and this issue must be resolved. It appears that it hangs during startup. I am sorry but I lost the ordinal number nnnn.
When I try to start the HTTP server from the Programs menu. It Hangs, and does not return an error message. See Figure 2, and the included Apache Setup.txt, the install log, and the HTTPd.conf . The conf, and setup files look OK to me. What is the problem?
b. All other services start correctly.
c. Logged into the database as SCOTT on the server with SQL Plus using the connection information:
FIA.CFR.MSSTATE.EDU =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = yggdrasill)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = FIA.YGGDRASILL.CFR.MSSTATE.EDU)
I created some tables, inserted data, and queried for the data. Everthing seems to be working correctly.
d. Logged in remotely from my AOL account on a dial-up line using Oracle 9i Release 2 Personal Edition installed on my ThinkPad. Every thing tested out as above. I used the connection information:
FIA.CFR.MSSTATE.EDU =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = yggdrasill.cfr.msstate.edu)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = FIA.YGGDRASILL.CFR.MSSTATE.EDU)
13. I concluded that except for the Oracle HTTP Server Service not starting correctly, and that after updating the MFC42u.dll to VC++ SP5 level the stage is set for installing Oracle 9i Mobile Server Release 5.0.1. I copied the MFC42u.dll to the server and registered it successfully.
14. As Visual Studio 6.0 Professional updates all of the MFC stuff, I decides to install it at this juncture, and apply SP5.
15. Installed JDK1.3.1 required for Oracle 9i Mobile Server Release 5.0.1
At this time the prerequisites for installing Oracle 9i Mobile Server Release 5.0.1 are satisfied, and MFC, and rt are at version 6.
It is important to note that after installing MS Visual Studio Professional 6.0 SP5, the HTTP server started working. It is clear that prior to installing Oracle Database it is essential that MFC, and possibly other components are upgraded before starting an installation of Oracle. This probably only applies to old NT servers, but it should be mentioned in the installation instructions.
16. Attempt to install Oracle Mobile Server Release 5.0.1
a. File locations Screen
Name: = OraLite501
Path: = D:\OraLite501
b. Select Mobile Server at Installation Screen
c. Mobile Server Repository Database Information Screen
Hostname = YGGDRASILL = hostname from tnsnames.ora
Port = 2030 = same as Database port
It is troublesome that the port in tsnames.ora is 1521, and not 2030 as was specified in the database install. I will try this port on the reinstall. On the retry, it worked. The problem was that I was mislead by the default port of 2030 at the database install. The database was actually installed on port 1521, and I was not given an error message, or warning. As I am a first time installer of Oracle products this threw me for a loop. The default port for the database needs to be 1521, if regardless of what the user specifies for a port you are going to install on port 1521.
Net Service Name = FIA.YGGDRASILL.CFR.MSSTATE.EDU = Global database name as required by installation instructions.
d. Yes. At Do you want to install the Mobile Server Repository question.
e. At Oracle Protocol Support, I checked the SPX box.
f. Summary, and Install screens function to specifications.
g. Mobile Server Repository Wizard
Database System password:
Password = phwphw
h. Mobile Server Repository Wizard
Schema Name: fiafield
Password : fiafield
i. Success at last with the install part. The problem was the wrong port number. See my above comments on this problem, and how Oracle could grease the skids for the next first time installer.
j. I could not find the httpd.conf file in the place the install instructions said it should be for running the Mobile Server in Oracle HTTP Server. Since only one copy of httpd.conf existed, I added the include D:\OraLite501\mobile\server\bin\wtgias.conf to the bottom of the file assuming that it is the correct one. I the re-booted instead of using apache -k restart. The Oracle HTTP Server started, so there is hope. The install instructions state that the httpd.conf file would most likely be in the program files directory, when they are really installed in the Oracle Lite home directory.
k. According to the documentation the Mobile Server should start when the Oracle HTTP Server starts with the wtgias.conf file added to the httpd.conf file. It does not. If I use Process Explorer, I know that Apache loaded the wtgias.conf, because both Apache.exe processes that are running have the wtgias.dll loaded. The facts are at this stage of the game are
1. OraMTSRecoveryService is started
2. OracleOraHome92HTTPService is started
3. OracleOraHome92Listener is started on port
4. OracleServiceFIA is started
5. Apache.exe has the wtgias.dll loaded
6. The Moble Server is not running and it should be if the documentation is correct.
7. If I start the Mobile Server either as a service using wtgsvc -i or with the webtogo command from the DOS prompt, the Mobile Server starts, but when I attempt to log in with the URL http://Yggdrasill:7778/webtogo/startup it inform me the Mobile Server is not started and it is. Figure 3 shows the response I receive from the login attempt.
l. I finally ran the Mobile Server in total debug mode using the command webtogo -d0", and it gave me the subtle hint that the correct URL is
http://Yggdrasill.cfr.msstate.edu/webtogo/startup.
When I use the above URL and I can login to the Mobile Server with UN = fiafield, and PW = fiafield. I was confused by the documentation. I was under the assumption that the host address would be either http://Yggdrasill:7778, or http://Yggdrasill:4443. After all when I, installed Oracle Database these URLs were listed. It needs to be made clear in the installation guide for the mobile server that the Mobile Server address is http://Your servers WWW address/webtogo/startup, and the statements about the Mobile Server will start when the Oracle HTTP Server is started needs to be removed since they are incorrect. Also, the documentation should clearly state that the Schema Name, and Password given in the Repository Wizard Screen are synonymous with the username, and password for the Mobile Server login.
m. After determning the hard way that the Mobile Server does not start when the the Oracle HTTP Server starts, and that the correct URL is http://Internet address/webtogo/startup = http://Yggdrasill.cfr.msstate.edu/webtogo/startup, I decide to start the Mobile Server as a service with the command wtgsvc -i. After I re-booted, to my surprise, I could not login to the Mobile Server. When I checked the system services, the webtogo service was running. So to give the start as a service thing a fair chance I re-booted again, but obtained the same results. I thus concluded that the Mobile Server will not run correctly as a service. As it turns out my conclusion was wrong. After waiting a few minutes, my login try was successful. The documentation should indicate that after booting it may be a minute or two before the Mobile Server service become available.
n. After some serious problems with the installer, and the documentation everything is working. I have a green light to go on to the next stage, which is program the handheld to take advantage of the Mobile Server. I will be glad to get back to programming, and am so thankful that I am not a network administrator.
Appendix
HTTPd.Conf (Abstract only), Apache Setup.txt,
tsnames.ora, and listener.ora.
HTTPd.conf (Abstract only)
# Based upon the NCSA server configuration files originally by Rob McCool.
# Include the Oracle configuration file for custom settings
include "D:\oracle\ora92\Apache\Apache\conf\oracle_apache.conf"
include "D:\OraLite501\mobile\server\bin\wtgias.conf "
tsnames.ora
# TNSNAMES.ORA Network Configuration File: D:\oracle\ora92\network\admin\tnsnames.ora
# Generated by Oracle configuration tools.
INST1_HTTP.CFR.MSSTATE.EDU =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = yggdrasill)(PORT = 1521))
(CONNECT_DATA =
(SERVER = SHARED)
(SERVICE_NAME = MODOSE)
(PRESENTATION = http://HRService)
FIA.CFR.MSSTATE.EDU =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = yggdrasill)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = FIA.YGGDRASILL.CFR.MSSTATE.EDU)
EXTPROC_CONNECTION_DATA.CFR.MSSTATE.EDU =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC0))
(CONNECT_DATA =
(SID = PLSExtProc)
(PRESENTATION = RO)
listener.ora
# LISTENER.ORA Network Configuration File: D:\oracle\ora92\network\admin\listener.ora
# Generated by Oracle configuration tools.
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC0))
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = yggdrasill)(PORT = 1521))
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = D:\oracle\ora92)
(PROGRAM = extproc)
(SID_DESC =
(GLOBAL_DBNAME = FIA.YGGDRASILL.CFR.MSSTATE.EDU)
(ORACLE_HOME = D:\oracle\ora92)
(SID_NAME = FIA)
Apache SetupInfo.txt
The following information is available in:
D:\oracle\ora92\Apache\Apache\setupinfo.txt
The HTTP Server can be accessed using the following URLs:
http://yggdrasill:7778
https://yggdrasill:4443You can find information regarding enabling the iSQLPLUS in the following Oracle manual.
http://download-east.oracle.com/docs/cd/B19306_01/server.102/b14357/ch2.htm -
Development and Quality server using different screen color setting
Hi,
I want to differentiate the Development and Quality server using different screen colors,
How can I set different color logon screen for the different kinds of servers.
Thank You.
Best Regards,
M.Thirumoorthi
[email protected]Hi Thiru moothi,
Please check these links :
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/ep/modifyingtheLogon+Page&
Custom Password Change Page
Custom Portal Logon Page
Reward points if handy!
Cheers,
Sandeep
Edited by: Sandeep Tudumu on Mar 26, 2008 7:41 PM -
Having trouble when I launch iTunes (version 11.0.2) on my Dell Laptop running Windows 7 Professional (service pack 1). I get an error message indicating software required to communicate with iPod and mobile phones was not installed correctly. Do you want iTunes to try to repair this for you? I normally respond with OK and it immediately tells me "could not be repaired. Please reinstall iTunes..." I have done this a number of times to no avail.
I also notice Quicktime is not getting installed at all.
That one is normal nowadays (ever since the iTunes versions 10.5.x).
The software required for communicating with iPods and mobile phones was not installed correctly. Do you want iTunes to try to repair this for you?
Let's try a standalone Apple Mobile Device Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of why it's not installing under normal conditions.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/
Right-click the iTunesSetup.exe (or iTunes64setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleMobileDeviceSupport.msi (or AppleMobileDeviceSupport64.msi) to do a standalone AMDS install.
(If it offers you the choice to remove or repair, choose "Remove", and if the uninstall goes through successfully, see if you can reinstall by doubleclicking the AppleMobileDeviceSupport.msi again.)
Does it install (or uninstall and then reinstall) properly for you?
If instead you get an error message during the install (or uninstall), let us know what it says. (Precise text, please.) -
2 error messages when opening itunes: "The software required for communicating with Ipods and mobile phones was not installed correctly. Do you want Itunes to repair this for you?" When clicking yes another message indicates not able to remove services. Another message is: "Service (ipod service) could not be installed. Verify that you have sufficient privileges to install system sources." I've uninstalled all Apple services (itunes, quicktime, apple software update, apple mobiles devices support, bonjour and apple application support and reinstalled itunes/quicktime - no change in error messages. I cannot burn CDs using Itunes. This all seemed to happen when I updated itunes to version 10. I have a Windows 7 64-bit operating system on a Dell Inspiron Zino HD; the Itunes software is also 64 bit.
See the second box of Troubleshooting issues with iTunes for Windows updates.
tt2 -
C++: Is it possible using callback function with ncacn_http and rpcproxy server ?
I have a remote procedure and I can call it using http over rpc. I pass trough an rpc proxy server for arriving to my rpc server.
But I cannot call a callback function to my client inside the server function.
Is it possible using callback function with ncacn_http and rpcproxy server ?
We are using IIS on windows server 2008 R2 and the server rpc and the client on the same PC with rpc rpoxy.
If I use ncan_ip_tcp all works fine.
Thanks
GianlucaHi,
About the develop question please post to the MSDN forum.
MSDN forum Developer Network
http://social.msdn.microsoft.com/Forums/en-US/home?forum=WAVirtualMachinesVirtualNetwork&filter=alltypes&sort=lastpostdesc
Thanks for your understanding and support.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
I'm getting the following errors while trying to provision a PS 2010 PWA on our SharePoint 2010 farm. Our PS instance has been working for a while now, and houses two other PWAs. But today,
when trying to create this one, I get "Failed - see the Application event Log" and the following in the Event Viewer:
Log Name: Application
Source: Microsoft-SharePoint Products-Project Server
Date: 4/2/2014 2:09:08 PM
Event ID: 6980
Task Category: Provisioning
Level: Error
Keywords:
User: DOMAIN\DB_Access
Computer: server
Description:
Provisioning 'PWA/SDN': To create databases we need dbcreator and securityadmin server roles on servers 'DB1' and 'DB1'.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-SharePoint Products-Project Server" Guid="{b2178104-1b5b-4c20-8c8f-960678ced9e5}" />
<EventID>6980</EventID>
<Version>14</Version>
<Level>2</Level>
<Task>20</Task>
<Opcode>0</Opcode>
<Keywords>0x4000000000000000</Keywords>
<TimeCreated SystemTime="2014-04-02T19:09:08.225Z" />
<EventRecordID>1676727</EventRecordID>
<Correlation ActivityID="{90131653-B0A4-4FAF-A43C-7DF07CBC3332}" />
<Execution ProcessID="11040" ThreadID="12384" />
<Channel>Application</Channel>
<Computer>sharepoint</Computer>
<Security UserID="S-1-5-21-2280669542-4145173436-3058324265-4222" />
</System>
<EventData>
<Data Name="string0">PWA/SDN</Data>
<Data Name="string1">DB1</Data>
<Data Name="string2">DB1</Data>
</EventData>
</Event>
Log Name: Application
Source: Microsoft-SharePoint Products-Project Server
Date: 4/2/2014 2:09:08 PM
Event ID: 6993
Task Category: Provisioning
Level: Error
Keywords:
User: DOMAIN\DB_Access
Computer: sharepoint
Description:
Provisioning 'PWA/SDN': Failed to provision databases. An exception occurred: To create databases we need dbcreator and securityadmin server roles on servers..
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-SharePoint Products-Project Server" Guid="{b2178104-1b5b-4c20-8c8f-960678ced9e5}" />
<EventID>6993</EventID>
<Version>14</Version>
<Level>2</Level>
<Task>20</Task>
<Opcode>0</Opcode>
<Keywords>0x4000000000000000</Keywords>
<TimeCreated SystemTime="2014-04-02T19:09:08.225Z" />
<EventRecordID>1676728</EventRecordID>
<Correlation ActivityID="{90131653-B0A4-4FAF-A43C-7DF07CBC3332}" />
<Execution ProcessID="11040" ThreadID="12384" />
<Channel>Application</Channel>
<Computer>sharepoint</Computer>
<Security UserID="S-1-5-21-2280669542-4145173436-3058324265-4222" />
</System>
<EventData>
<Data Name="string0">PWA/SDN</Data>
<Data Name="string1">To create databases we need dbcreator and securityadmin server roles on servers.</Data>
</EventData>
</Event>
Log Name: Application
Source: Microsoft-SharePoint Products-Project Server
Date: 4/2/2014 2:09:08 PM
Event ID: 6958
Task Category: Provisioning
Level: Error
Keywords:
User: DOMAIN\DB_Access
Computer: sharepoint
Description:
Provisioning 'PWA/SDN': Database provisioning failed.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-SharePoint Products-Project Server" Guid="{b2178104-1b5b-4c20-8c8f-960678ced9e5}" />
<EventID>6958</EventID>
<Version>14</Version>
<Level>2</Level>
<Task>20</Task>
<Opcode>0</Opcode>
<Keywords>0x4000000000000000</Keywords>
<TimeCreated SystemTime="2014-04-02T19:09:08.225Z" />
<EventRecordID>1676729</EventRecordID>
<Correlation ActivityID="{90131653-B0A4-4FAF-A43C-7DF07CBC3332}" />
<Execution ProcessID="11040" ThreadID="12384" />
<Channel>Application</Channel>
<Computer>sharepoint</Computer>
<Security UserID="S-1-5-21-2280669542-4145173436-3058324265-4222" />
</System>
<EventData>
<Data Name="string0">PWA/SDN</Data>
</EventData>
</Event>
Log Name: Application
Source: Microsoft-SharePoint Products-Project Server
Date: 4/2/2014 2:09:08 PM
Event ID: 6971
Task Category: Provisioning
Level: Error
Keywords:
User: DOMAIN\DB_Access
Computer: sharepoint
Description:
Failed to provision site PWA/SDN with error: Microsoft.Office.Project.Server.Administration.ProvisionException: Failed to provision databases. ---> Microsoft.Office.Project.Server.Administration.ProvisionException: To create databases we need dbcreator and
securityadmin server roles on servers.
at Microsoft.Office.Project.Server.Administration.PsiServiceApplication.EnsureDatabases(ProjectProvisionSettings provset, SPSite pwaSite, String adminName, String adminEmail, ProjectDatabaseStateType& originalDatabaseState, Guid& adminGuid)
--- End of inner exception stack trace ---
at Microsoft.Office.Project.Server.Administration.PsiServiceApplication.EnsureDatabases(ProjectProvisionSettings provset, SPSite pwaSite, String adminName, String adminEmail, ProjectDatabaseStateType& originalDatabaseState, Guid& adminGuid)
at Microsoft.Office.Project.Server.Administration.PsiServiceApplication.CreateSite(ProjectProvisionSettings provset)
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-SharePoint Products-Project Server" Guid="{b2178104-1b5b-4c20-8c8f-960678ced9e5}" />
<EventID>6971</EventID>
<Version>14</Version>
<Level>2</Level>
<Task>20</Task>
<Opcode>0</Opcode>
<Keywords>0x4000000000000000</Keywords>
<TimeCreated SystemTime="2014-04-02T19:09:08.226Z" />
<EventRecordID>1676730</EventRecordID>
<Correlation ActivityID="{90131653-B0A4-4FAF-A43C-7DF07CBC3332}" />
<Execution ProcessID="11040" ThreadID="12384" />
<Channel>Application</Channel>
<Computer>sharepoint</Computer>
<Security UserID="S-1-5-21-2280669542-4145173436-3058324265-4222" />
</System>
<EventData>
<Data Name="string0">PWA/SDN</Data>
<Data Name="string1">Microsoft.Office.Project.Server.Administration.ProvisionException: Failed to provision databases. ---> Microsoft.Office.Project.Server.Administration.ProvisionException: To create databases we need dbcreator and securityadmin
server roles on servers.
at Microsoft.Office.Project.Server.Administration.PsiServiceApplication.EnsureDatabases(ProjectProvisionSettings provset, SPSite pwaSite, String adminName, String adminEmail, ProjectDatabaseStateType& originalDatabaseState, Guid& adminGuid)
--- End of inner exception stack trace ---
at Microsoft.Office.Project.Server.Administration.PsiServiceApplication.EnsureDatabases(ProjectProvisionSettings provset, SPSite pwaSite, String adminName, String adminEmail, ProjectDatabaseStateType& originalDatabaseState, Guid& adminGuid)
at Microsoft.Office.Project.Server.Administration.PsiServiceApplication.CreateSite(ProjectProvisionSettings provset)</Data>
</EventData>
</Event>
Anybody ever get any events like this before? I'm not finding much or nothing on Google or on other forums, so I thought I would run it past and see if anyone has experienced anything of a similar
nature. And yes, the farm account obviously has creator/secadmin permissions, at this point of our deployment....
I look forward to any and all feedback. Thanks and good afternoon!I figured out the answer to this myself. For those few who might run into something akin to my error...
During the off-hours of where I work, I re-applied the farm account credentials to all dB server VM SQL services that had the account for a log-on (i.e., MSSQLSERVER, SQLSERVERAGENT, etc.) as well as all SharePoint services on our WFE/App Server VM (a two
server farm is what we host), in that order. Then I rebooted the dB server first, followed by the SharePoint server. Upon coming back, everything was working fine again. I was able to provision a site, no probelm, and it seemed to even be a little snappier
when doing so.
One note: doing this procedure gave me a "One or more services have started or stopped unexpectedly" error in the Health Analyzer, for the SPTimerV4 service. When you get this, simply enter into the item and click on "Reanalyze Now;" this will quickly clear
the error out of the Analyzer, and all should be right with the world! :) -
Help, When I click on itunes on my computer it tells me that the software required for communicating with ipods and mobil phone was not installed properly. I havent' changed anything. Does anyone know what I should do? Thanks
See the second box of Troubleshooting issues with iTunes for Windows updates.
tt2 -
The software required for communicating with ipod and mobile phones was not installed correctly
ok i've seen this in several threads and haven't found one with an anwser. the software required for communicating with ipod and mobile phones was not installed correctly. of course when you tell it to repair it does not. this has happened several times now and only cure i have found is uninstalling itunes and reinstalling. works for maybe a few weeks then does the same thing and i start all over again with uninstall and reinstall. i tunes version 10.4.1.10 64 bit running on windows 7 64 bit and trying to sync with Iphone 3gs - so anyone have a fix for this or am i stuck reinstalling itunes every few weeks???
"The feature you are trying to use is on a network resource that is unavailable. Click OK to try again, or enter an alternative path to a folder containing the installation package "iTunes64msi"
(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
(2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
(4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time? -
Essbase Server and Deployment Server on different boxes
Hi,We're currently testing Hyperion Essbase 7.1.2 and we were wondering if it was possible to have the Essbase (Analytic) Server on one machine and Deployment Server on a different one. At first sight, it seemed so, so we did just that.Now, we'd like to test our setup by signing on through the ESS command line prompt (on the Deployment Server machine) but seem to miss something since the connection ("signon") is refused. The funny thing is that on the machine on which the Essbase Server is installed, we've also installed the Administration Services: through the Administration Console, we can indeed connect to the Deployment Server and interact with it.So my first question is: is our setup possible (that is, having the Deployment and Essbase servers on distinct boxes)?If so, what is the meaning of all the parameters needed for the "signon" command of the ESS command line prompt?Any guidance would be greatly appreciated.Thanks,A. Lepage
Yes, you can configure it that way and we have many customers with that setup.You have to login to the EDS console the first time using the 'default' admin username/password (system/password) and setup a username, with admin privileges, that also is on your Essbase server. Logout, then login with the 'real' username. Select the domain object ('essbase at the top of the tree'), right mouse click and add an analytic server. Type in the name of your Essbase server and it should be added (and you should be able to browse objects on the Essbase server). Finally, select the server, right mouse click and 'sync security'.Tim TowApplied OLAP, Inc
Maybe you are looking for
-
Multiple libraries, Pbook/Pmac, advice for management & updating please.
Hi Everyone, I travel frequently, and am looking for suggestions to keep all my iPhoto libraries up to date. I currently have a g5, Powerbook, and Mini. I just upgraded to iPhoto 6 and I have several thousand photos on my Dual g5. I just came back wi
-
DOM parsing from memory avoid deprecated class usage
I am parsing an xml file from memory stored in a StringBuffer xmlBuffer like this try { DocumentBuilderFactory dbf = DocumentBuilderFactory.newInstance(); DocumentBuilder db = dbf.newDocumentBuilder(); Inp
-
How can I make the text larger... I cant read it anymore
I need to have the text enlarged..how do i do that. I cannot read anything on my pages anymore
-
Hello, does anybody used any of the se3000 family storage under red hat linux , model 3310 or 3320 or 3510 ? There are any documents around for the setup or any howtos ? Any info apreciated . Thanks, Patrizio
-
VA42 Contract split during Billingu0096 Based on Partner different regioregion
Hi All, I am trying do a billing for a contract in VA42, which as 2 line item. When I do billing for this contract it creates 2 separate Invoice Reason Ship-To-Party as different region. In VOFM I try to implement routine to stop splitting based on