Mobile Access Services displaying as XML

O.K.
I also have a single machine set up (the new MacMini Server). I am trying to access Address Book Server. I have the service up and the checkbox checked and pointed the internal server to same address as the external
forexample.myserver.org
for testing purposes I have been using a self generated certificate (that also matches the name of the server)
In a web browser (like Safari on the iPhone) I type in https://forexample.myserver.org:8843
I have finally connected to and gotten the secure sign in page...but after logging in the browser gives me this (the code instead of usable interface) and Im STILL locked out of the directories that hold the actual Address Book data (though I can see the directory listing now)...what is up?
Name Size Last Modified MIME Type
.server-uuid 36 2009-Nov-16 22:26 (collection)
addressbooks/ ? 2009-Nov-16 22:36 (collection)
principals/ ? 2009-Nov-16 22:26 (collection)
Properties
Name Value
{DAV:}acl
(access forbidden)
{DAV:}acl-restrictions
<?xml version='1.0' encoding='UTF-8'?>
<acl-restrictions xmlns='DAV:'/>
{DAV:}creationdate
<?xml version='1.0' encoding='UTF-8'?>
<creationdate xmlns='DAV:'>2009-11-16T22:36:24Z</creationdate>
{DAV:}current-user-principal
<?xml version='1.0' encoding='UTF-8'?>
blah blah blah

By single machine I mean I am running the Mobile Access Service on the same physical server that Address Book server is running on (the documentation highly recommends running Mobile Access Server on one machine as a proxy and running your other services with the data (like Address Book) on another)
Mobile Access Service is the service that allows iPhone users to connect to services without needing to go through a vpn.
I don't know what the mechanism is to actually access the data (while there is a section on setting up Mobile Access in the Network Services documentation there is absolutely no explanation for how to get to the data with your iPhone.

Similar Messages

ITunes displays a message saying this ipod cannot be used because the apple mobile device service is not started. Help?

iTunes displays a message saying this ipod cannot be used because the apple mobile device service is not started. Help?

Try here:
iPhone, iPad, iPod touch: How to restart the Apple Mobile Device Service (AMDS) on Windows

What do i do if my ipod displays this message "this ipod cannot be used because the mobil device service is not started"

what do i do if my ipod displays this message "this ipod cannot be used because the mobil device service is not started"

Make sure the Apple Mobile Device Service is installed and running. I would start with this Apple support document.
http://support.apple.com/kb/ts1567
B-rock

Itunes displays message "this phone cannot be used because the apple mobile device service is not started

itunes displays message "this phone cannot be used because the apple mobile device service is not started

Type " apple mobile device service" into the search bar at the top of this page by "Support" and read the resulting help articles.

I am trying to synch my iphone but when i tunes starts it doesnt display the device in the left hand column and a box comes up saying "This iphone cannot be use because the Apple Mobile Device service is not started" I have synched this phone many times

i keep getting a message when i try to synch my iphone "This iphone cannot be used because the Apple Mobile Device service is not started" I have synched this phone with this computer many times before with no problems. Can anyone please shed any light on how to fix this? thx

See Here
http://support.apple.com/kb/TS1567

When i plug my ipod in it displayes.. this ipod cannot be used because the apple mobile device service is not started.

how can i connect my ipod?

Try here:
iPhone, iPad, iPod touch: How to restart the Apple Mobile Device Service (AMDS) on Windows

Is anyone successfully using Mobile Field service - laptop version in 12.2.X ?

We need this type of functionality but we are on 12.0.6. We are considering upgrading but we were going to upgrade later this year. However, we need this type of functionality as soon as possible. Is anyone using Mobile Field Service in 12.2.X with laptops?

Hardik,
I am using an O2 XDA II with Pocket PC 4.2. I am using IAS 9.0.4.0.0.
I have defined a service in my midtier which outputs XML with a signature box:
<SimpleFormItem name="p_signature" type="signature"> etc
My PDA displays the signature box correctly in the web browser.
When I sign the box and press Submit the following data items are returned to the midtier:
Query String: "sigSubmit=mySubmit&sig_width=200&sig_height=100&sig=&personName=tim"
Notice that the sig data is null.
I know that my IAS version is a little low, but, the problem appears to be that the plug-in in the browser is not returning any sig data.
Do I have an old version of the plug-in?
Have you used this plug-in?
Has it worked for you?
Do you know where I can get a newer version of this plug-in as it must work with Oracle Apps?
Regards,
Tim.

Subinventory LOV not getting populated in Mobile Field Service Pocket PC

Hi,
After installing Mobile Field Service Pocket PC on a Windows Emulator, and connecting to Oracle Database Lite webtogo, while trying to create a parts requirement the subinventory LOV is empty. The other fields like item and address are getting populated.Because the Subinventory cannot be selected , the order cannot be created.
Please help!
Thanks

what is the item Style of ChargeAccountId ?
it should be formValue
in the xml you should have something like this
<oa:formValue id="ChargeAccountId" viewName="xxpowlPOReqIntfUpdateEOVO" viewAttr="ChargeAccountId"/>

Mobile Access Server setup

So, I'm setting up a 10.6.1 server in the DMZ to be a Mobile Access Server to reverse proxy mail, calendaring, and web. Couple issues I have:
1. I want to manage this DMZ server from a different internal 10.6.1 Server inside my network. I have turned on Remote Management on the DMZ server, but cannot connect from Server Admin on the internal server to the DMZ server. I need to be able to manage both servers from one Server Admin console. I also need to be able to screen share the DMZ server for access ONLY from the internal server. How do I accomplish this?
2. My internal 10.6.1 server is my Open Directory Master already, and working nicely. But to use Mobile Access Server and reverse proxy services back to the internal server, I need the DMZ server to be aware of my existing directory inside. Would I want to make the DMZ server an Open Directory Replica, or should I use the middle option for Open Directory types called "Connect to another directory"? Obviously, I know that it should NOT be another master.
3. I have purchased and implemented a wildcard cert on my internal 10.6.1 server to use for TLS, HTTPS, etc. I have also told the Open Directory Master to use ssl for the LDAP piece of it (there's a GUI option for that). Figured I might as well secure everything I can a bit more since I purchased the cert. What effect will this have on Question 2 above? Will I need to open a different port for instance on the firewall for LDAP over SSL? Or any issues with creating a Replica or "connect to another OD server" on the OD server in the DMZ to get it to connect to the internal OD Master?
Thanks for all the help here.

To your #1: When you use a firewall to place a device in a DMZ, that device is not part of the internal network. It 'technically' sits on the outside of the firewall at nearly the same place as your external connection.
Some discussions about a firewall use colors to designate the 'data protection' level or 'threat' vector.
(Below was 'borrowed' from http://riskless.com/firewall_configuration.aspx)
* RED Network Interface
This network is the Internet or other untrusted network. IPCop’s primary purpose is to protect the GREEN, BLUE and ORANGE networks and their computers from traffic originating on the RED network. Your current connection method and hardware are used to connect to this network.
* GREEN Network Interface
This interface only connects to the computer(s) that IPCop is protecting. It is presumed to be local. Traffic to it is routed though an Ethernet NIC on the IPCop computer firewall.
* BLUE Network Interface
This optional network allows you to place wireless devices on a separate network. Computers on this network cannot get to the GREEN network except tightly controlled “pinholes”, or via a VPN. Traffic to this network is routed through an Ethernet NIC.
* ORANGE Network Interface
This optional network allows you to place publicly accessible servers on a separate network. Computers on this network cannot get to the GREEN or BLUE networks, except through tightly controlled “DMZ pinholes”. Traffic to this network is routed through an Ethernet NIC.
* The GREEN and RED networks are required
* The ORANGE and BLUE networks are optional
The interface requirements for your RED network will vary depending on your connection to the Internet. The RED network may require an additional Ethernet card and cable.
you can also read up all this from a more neutral article here: http://www.ocmodshop.com/ocmodshop.aspx?a=1526
The point of all this is that, depending on 'where' the dat is comgin from , it either is denied access ,or must be 'punched through' to allow access. Her is a diagram of that process (from a linux firewall called ipcop)
!http://www.ipcop.org/1.4.0/en/admin/images/traffic.png!
Soaccess from inside (your network) to your DMZ device should work without any trouble but from DMZ to inside should require ports to be opened up. On most Firewalls, they call this port access 'Pin Holes' as the DMZ is itself protected by only allowing the ip address of that network into through the firewall. Possibly Your firewall is not doing any kind of Statefull Packet Inspection so all conversations must have a pinhole to come 'back' out of the dmz? Tell us your firewall brand and that might help.
#2: I would use "Connect to another directory". YOu want to limit the amount of data that can be compromised in the DMZ. As I mentioned the DMZ is outside your network, technically naked to the world. I believe that any port that does NOT get routed (forwarded) into your green, will automatically be forwarded to your DMZ, so it will be hammered with all manner of hack and virus vectors.
Peter

When i plug my ipod touch 4g into my computer is says that "this ipod cannot be used because the apple mobile device service is not started" what do i do?

when i plug my ipod 4g into my computer is says that "this ipod cannot be used because the apple mobile device service is not started" what do i do?

http://support.apple.com/kb/TS1567
There have been some problems accessing pages on the Apple web site. If the hyperlink gives you a "We're sorry" message, try again.

AMSD Apple Mobile Device service fails to start

I use an iPhone 4 without problems until recently.
Apple Mobile Device Service is set to Automatic under Startup Type.
When I click start I get the message that the service started and then stopped.
This happens randomly, requires restarting computer.
Any idea what might be happening? Start to be tired of using an iPhone...

Hi there Jbrashear,
It sounds like you want to know how to restart the Apple Mobile Device Service because of an alert that was displayed when you were trying to update or reinstall iTunes.
The article below will walk you through the process starting or stopping the Apple Mobile Device Service on your PC.
How to restart the Apple Mobile Device Service (AMDS) on Windows - Apple Support
Also, if you haven't already, take a look at this article which walk you through the process of completely removing iTunes and then reinstalling it.
Remove and reinstall iTunes and related software components for Windows Vista, Windows 7, or Windows 8 - Apple Support
Take care,
-Jason

Apple Mobile Device Service fails to start

The last update failed on my window 7 pc,
resulting in me having to try it manually download and install, this also
failed eventually it told me to delete and reinstall, this fails due to the
apple mobile device service failing to start, and asking me if I have
sufficient privileges to start system service, help please

Hi there Jbrashear,
It sounds like you want to know how to restart the Apple Mobile Device Service because of an alert that was displayed when you were trying to update or reinstall iTunes.
The article below will walk you through the process starting or stopping the Apple Mobile Device Service on your PC.
How to restart the Apple Mobile Device Service (AMDS) on Windows - Apple Support
Also, if you haven't already, take a look at this article which walk you through the process of completely removing iTunes and then reinstalling it.
Remove and reinstall iTunes and related software components for Windows Vista, Windows 7, or Windows 8 - Apple Support
Take care,
-Jason

Apple Mobile Device service could not be started. (-2146959337)

I keep getting the error "Apple Mobile Device service could not be started because an unknown error occurred (-2146959337). After I hit OK, it says "This iPod cannot be used because the Apple Mobile Device is not started." I have tried starting the service by going into Services, but it just tells me "Error 5: Access is denied." I have reinstalled iTunes, Quicktime, and Apple Mobile Device service multiple times, but I still get the same error. I had an iPod nano that worked fine, but now that I got an iPod touch, it gives me this issue every time I connect it.

I figured it out on my own, and it was an odd fix. I added a password to my account in users, and then made Apple Mobile Device service log in through my account, and now it works.

How do I resolve itunes error message " ipod cannot be used because the apple mobile device service is not started"?

After I had Best Buy restore my ipod to factory settings, went to itunes from computer to restore my music. Getting the error message " Ipod cannot be used because the apple mobile device service is not started". Ipod is connected to Wi-Fi, connecting to itunes o.k. on ipod

http://support.apple.com/kb/TS1567
There have been some problems accessing pages on the Apple web site. If the hyperlink gives you a "We're sorry" message, try again.

Windows 7 64 bit, Apple Mobile Device Service not found.

Hi First post, sorry sorry if this is in the wrong place
I have a dell Laptop running Windows 7 X64 and Apple Mobile Device Service is not installing and cannot be found in services.
note the account has Admin privildges (the logging below is wrong) and UAC and Virus protection has been switched off.
I have used the apple processes to uninstall everything and then reinstall multiple times. I am defintly trying to install the latest 64 bit version.
Microsoft Windows 7 x64 Home Premium Edition (Build 7600)
Dell Inc. Inspiron 1545
iTunes 9.0.2.25
QuickTime 7.6.5
FairPlay 1.5.23
Apple Application Support 1.1.0
iPod Updater Library 9.0d11
CD Driver 2.2.0.1
CD Driver DLL 2.1.1.1
Apple Mobile Device Driver not found.
Bonjour 1.0.6.2 (118.5)
iTunes Serial Number D67ADF69AA323879
Current user is not an administrator.
The current local date and time is 2010-01-11 16:46:14.
iTunes is not running in safe mode.
Video Display Information
Intel Corporation, Mobile Intel(R) 4 Series Express Chipset Family
Intel Corporation, Mobile Intel(R) 4 Series Express Chipset Family
** External Plug-ins Information **
No external plug-ins installed.
** iPod/iPhone Connectivity Tests **
iPodService 9.0.2.25 is currently running.
iTunesHelper 9.0.2.25 is currently running.
Apple Mobile Device Service not found.
Universal Serial Bus Controllers:
Intel(R) ICH9 Family USB Universal Host Controller - 2934. Device is working properly.
Intel(R) ICH9 Family USB Universal Host Controller - 2935. Device is working properly.
Intel(R) ICH9 Family USB Universal Host Controller - 2936. Device is working properly.
Intel(R) ICH9 Family USB Universal Host Controller - 2937. Device is working properly.
Intel(R) ICH9 Family USB Universal Host Controller - 2938. Device is working properly.
Intel(R) ICH9 Family USB Universal Host Controller - 2939. Device is working properly.
Intel(R) ICH9 Family USB2 Enhanced Host Controller - 293A. Device is working properly.
Intel(R) ICH9 Family USB2 Enhanced Host Controller - 293C. Device is working properly.
No FireWire (IEEE 1394) Host Controller found.
** iPhone/iPod Touch Sync Tests **
No iPhone or iPod found.
thanks

I am having the same problem for three-four months now. When I called the help-desk of apple, they said windows 7 x64 wasn't compatible with itunes, and they told me that I had to wait for a newer version of itunes.

Mobile Access Services displaying as XML

Similar Messages

Maybe you are looking for