Mobile Archive Converter "Application Drop down box " question
Hi All ,
In the NWA under SAP Mobile Infrastructure-> Mobile Archive Converter
For me the "Application type" dropdown box on the Archive converter screen don't has any entries (blank dropdown list box) . it is a mandytory field.... Do you know this is because on any authorization or some table data i need to populate??????
Thanks for your help in advance.
Greetson
Hi Greetson,
Please check whether you have done the configurations for setting up of the NWA, because these fields are automatically retrieved if it is correctly configured.
Regards,
Nameeta
Similar Messages
-
Is there a way to allow multiple options to be chosen from a drop down box? I have the Designer version ES 8.2 that came w/ Acrobat Pro Extended 9. Thanks.
I am not aware of any way to enable multiple selections. That said, it would be possible to create a script that concatenates serial selections. (records and joins the selections). This could be displayed in another field, if desired.
Or, you could script additional instances of your dropdown box with a button. Or, even the exit event of the dropdown box itself.
Good luck!
Stephen -
Mobile Archive Converter question
In NWA under SAP Mobile Infrastructure-> Mobile Archive Converter
For me the "Application type" dropdown box on the Archive converter screen don't has any entries (blank dropdown list box) . it is a mandytory field.... Do you know this is because on any authorization or some table data i need to populate??????
Thanks for your help in advance.
GreetsonHi,
what he is talking about: when you setup the system, in the J2EE Vusial Admion tool - the tool you start from the command line with go.bat - you have to setup the JCoRFC and the SAPJRA provider.
From the last problem you had I remember you had several clients you connected to. Ok, at the end it was the wrong version of the client, but anyhow, you connected to several clients.
Well, in this case Satyendra asks, if thesettings in J2EE Visual Admin are pointing to client 800 or to another client.
Well, because the table is cross client, it should not make a difference in my understanding, but as you are using Client 800 it is good to change these settings to client 800 as well. Hve a look here for the installation guide:
http://help.sap.com/saphelp_nw2004s/helpdata/en/a3/583aef1baa6d42b22bedcb4dec5db9/frameset.htm
Check to points for Configure SAp Netweaver AS -> Mobile Administrator.
One thing I am wondering: you said earlier you had been able in the past to deploy Apps without problems - what have you changed after that? Is it that you are using another client now?
Hope this helps to get you back to work!
Regards,
Oliver -
This is my first use of this program. How do I remove a page break? How do line up my drop down box along side the text box on the left of it? The drop down is for a multiple choice answer for the question to the left of each drop down.
See McAfee support to find out how to disable that McAfee feature - that isn't part of the normal Firefox installation.
-
CRASH REPORT
Product: Adobe Photoshop CC
Application running on:
Apple iMac 3.5GHz late 2013 / Mavericks 10.9.2
Application crashes without warning. Symptom: Drop down boxes go blank white (I shot screen captures of blank drop down boxes) and application stops working, actions for appox. 10 minutes preceding crash are lost. Force Quit required to quit unresponsive / frozen application and then Restart of Adobe Photoshop CC
Crash Frequency: Three time in this work day, 5.6.14 Once a day sporadically (approximately 10 times) in past two weeks.
Other applications running at time of crashes: Adobe Bridge - NOT effected. Computer was on line with no browsers open.
Otherwise computer continued to operate normally.
I have been using Adobe Photoshop CC for approximately two months.Thanks, Chris,
I hope that this is the solution.
re: "And a crash report without an actual crash report (a long, detailed text document available from the crash report dialog), is not all that useful" :
I did in deed submit a homemade crash report.
I would have submitted "an actual Crash Report " and sooner, but: When this event occurs. there are NO dialog boxes. All frozen / blank. No possibility of "actual crash report" !
Thank you! -
Why can't the Accordian widget's drop down box span full width in mobile layout?
I'm trying to create a simple drop down navigation for mobile. When the entire header is clicked, it expands down to reveal a dynamic vertical menu, which will cover the page content below, not push it down.
I've taken an accordian widget and added a vertical navigation widget (to allow dynamic navigation) into the expanded area. When I preview it, the drop down box of the accordian widget doesn't span the full width of the site width (380px). It stops 5-10px short of the right edge, which is a small detail, but it annoys me, and is not how I have it set up in design view. There is no other content on the page, just this element. When I have elements extend off the page area, it somehow affects the amount of space the drop down area stops short from and adds more. Strange again. Kind of stumped as to if/how I can fix this.
Screenshot attached.The code taht you have shown is not the template, it is a document that has been created from a template and renamed with a dwt extension.
If you load the document into DW then go to menu item Modify->Templates->Detach from Template and save the file, you will have your original template called index.dwt and located in the Templates subdirectory. -
How to fill a drop down box in a webdynpro application
Hi friends ,
i am facing one problem while filling a dropdown box with some hot coded values : " High","Medium","low"..etc..
drop down box having fixed elements always.....
means all values should be static and i have to fill it at design time only..
can any body pls reply for the above same......
Thanks and Regards
Ratnakar reddyHi Ratnakar,
If u r using Dropdown By Key, u can use the method that Armin suggested.
If u r using Dropdown By Index, then do the following
Let ur View Name be 'MyView'
1. In ur View Context,Create a Node(Say Root) of Cardinality 0..N
2. Create a value attribute(Say Name) in 'Root'.
3. In wdDoInit(), add the following code
IPrivateMyView.IRootNode rNode=wdContext.nodeRoot();
IPrivateMyView.IRootElement rEl=rNode.createRootElement();
rNode.addElement(rEl);
rEl.setName("HIGH");
rEl=rNode.createRootElement();
rNode.addElement(rEl);
rEl.setName("MEDIUM");
rEl=rNode.createRootElement();
rNode.addElement(rEl);
rEl.setName("LOW");
Hope this be Helpful
Fahad Hamsa -
Reg Mobile Archive Converter (Fileds are disabled)
Hi All
I have configured the MI server and is working fine. Only problem I face is, few fields in the Mobile Archive Converter are disabled and there is no application types found in the "Application Type" drop down. So I am not able to convert the war file to SDA. Since MTT applications are provided with sda I was able to deploy them successfully. But I would like to sovle this issue to convert other application war files.
I went throught the solution given in the forum. I have all rights assigned to the user I use, and also tried with the j2eeadmin, it is the same.
The fields disabled are
-Runtime
-Operating System
-Processor
-Language
-No application types found in "Application Type" drop down.
Help would be appriciated.
Thanks
RajHi Rajesh,
Please check if user logged on NWA has the following UME permissions.
1. ArchiveConverter
2. ACLAdministration
This you can check via -: http://serverID:portnumber/useradmin
Search for the role assigned to logged on NWA user and check if the above 2 action assigned that role or not.
Is ArchiveConverter displaying any message?
If yes and the message is "can not read the initial settings from middleware" then Please check the settings of SAPJRA.
Settings you can find in SDN check my all posts.
Regards,
Satyendra -
Here are the environmental details:
SQLDeveloper 32-bit Version 3.2.20.09 (Build MAIN-09.87)
Oracle Database: 12C single instance (no RAC)
Oracle client: 12C 32 bit
Windows 64 bit desktop
I am attempting to migrate an MS Access application to Oracle. I pick the ‘Migrate’ selection from the ‘Tools’ Menu SQL Developer. This puts me into the Migration Wizard. When I get to the ‘Source Database’ step of the migration wizard, the ‘Choose the Third Party database from which you are migrating’ drop-down box is not being populated with the current available connections. It is empty. If I type a valid connection name into the box, SQL Developer takes it on this screen but does not keep it for the next screen/step. It has no persistence. I even tried to make sure that each connection was open/connected before beginning the migration process.
Due to the fact that I am attempting to migrate an MSAccess application, I am mixing 32-bit and 64 bit software. This may be the issue as to why the drop down is losing addressability. I have not applied any patches to this version of SQL Developer.Hi,
If you need easy way to migrate Microsoft Access to Oracle probably it is more reasonable to review some tools specially designed to this purpose. For example:
Access to Oracle converter by Intelligent Converters
Access to Oracle converter by SpectralCore
Access to Oracle converter by Interface Computers
Hope, this will help.
Sincerely,
Vlad -
Standalone Interactive Forms without ABAP Dynpro and Drop down boxes
Friends,
I need to create Adobe interactive form with drop down boxes. I have 2 questions:
1) do i need to use abap dynpro to display the form or can i display the form using print program
2) for using drop down box, should i use the one from standard library or Web Dynpro ActiveX or Web Dynpro Native library
Points will be rewarded for helpful answers.
Thanks.Hi,
Its not necessary to have ABAP web Dynpro to create and display adobe forms. You can display it in programs in ABAP. Go to following link to know more:
[https://www.sdn.sap.com/irj/sdn/adobe#section39]
There is a sample application for Adobe form in ABAP and lot more.
You can use web dynpro Native dropdown list.
Hope it will help you.
Regards,
Vaibhav Tiwari. -
Hebrew fonts from drop-down box not displaying in text box.
I am using InDesign CS 5.5 on a Mac 10.8.4.
When in ID, the fonts I am seeing on the Font dropdown menu when I try to use in a text box are not displaying correctly. They only display as boxes. The fonts are in the Hebrew language. They are properly installed in the FontBook.
Please help!! Thank you.Reema,
I followed most of your steps. I have a question reg. step 3 ie populating data in node 1.
Here is my code:
method WDDOINIT .
types: begin of zs,
zktokd type kna1-ktokd,
end of zs.
data: handle1 type ref to if_wd_context_node,
begin of zstruct,
zktokd type kna1-ktokd,
end of zstruct,
zitab type table of zs.
handle1 = wd_context->get_child_node( name = 'NODE1' ).
*select ktokd into corresponding fields of zstruct from kna1.
*append zstruct to zitab.
*endselect.
zstruct-zktokd = 'Sold-to party'.
append zstruct to zitab.
zstruct-zktokd = 'Goods recipient'.
append zstruct to zitab.
zstruct-zktokd = 'Payer'.
append zstruct to zitab.
zstruct-zktokd = 'Bill-to party'.
append zstruct to zitab.
zstruct-zktokd = 'Prospective Customer'.
append zstruct to zitab.
zstruct-zktokd = 'Competitor'.
append zstruct to zitab.
zstruct-zktokd = 'Sales partners'.
append zstruct to zitab.
zstruct-zktokd = 'Hierarchy Node'.
append zstruct to zitab.
zstruct-zktokd = 'Named List of Accounts'.
append zstruct to zitab.
zstruct-zktokd = 'Distribution center'.
append zstruct to zitab.
zstruct-zktokd = 'Payer'.
append zstruct to zitab.
handle1->bind_table( new_items = zitab ).
endmethod.
Please let me know if this is the best way to populate the node and then bind the table values from the node to the drop down box.
Thanks and Regards. -
How can we get a value in a drop down box without refreshing the page
In my application i am having 14 drop down boxes. On selcting a particular value in a drop down box i am doing its corresponding functionality. I would like to get these values without refreshing the page each and every time i select a text box, Is it possible to get these values without refreshing the page each and every time.
RaghuThere is a new hype going on called AJAX. It is either that, or dumping a lot of information in javascript arrays and reading the information from there when you make selections. I would choose AJAX.
-
How to create a drop down box and text box in screen painter?
Hi i am totally new to this concept of screen painter..please can any tell me
how to create drop down box in screen painter?
How to create or display default date and time values?
How to create text box for giving comments?
How to store the records that we are entering in a table?
Please can any one send me the procedure for creating all these its very urgent useful information will be surely rewarded.Hi,
Check all these.
1.how to create drop down box in screen painter?
To get Drop Drown Box on screen .
Follow these steps.
1.
Go to T.Code SE51 and Select Laypout for the Screen.
2.
Double click on the field for which u want Dropdown box.
3.
Then U will see Name ,Text ,DROPDOWN.Click on that and select List Box or ListBox with key . Better to to select first one.
4.
Save and Activate ur screen .
5.
Enter the following piece of code in the PBO of the screen.(Change for ur requirement).
6.
The following code should be written under PROCESS BEFORE EVENT in the MODULE.
TYPE-POOLS :vrm.
DATA:
i_natio TYPE vrm_values, "-->Table that is passed through FM vrm_set_values
w_natio LIKE LINE OF i_natio.
DATA:
BEGIN OF i_t005t OCCURS 0,
land1 TYPE t005t-land1,
natio TYPE t005t-natio,
END OF i_t005t.
IF i_t005t[] IS INITIAL.
SELECT land1 natio
FROM t005t
INTO TABLE i_t005t
WHERE spras = sy-langu.
IF sy-subrc = 0.
LOOP AT i_t005t .
w_natio-key = i_t005t-land1.
w_natio-text = i_t005t-natio.
APPEND w_natio TO i_natio.
CLEAR w_natio.
ENDLOOP.
ENDIF.
ENDIF.
CALL FUNCTION 'VRM_SET_VALUES'
EXPORTING
id = 'I_IT0002-NATIO' "-->Field for which dropdown is needed.
values = i_natio
EXCEPTIONS
id_illegal_name = 1
OTHERS = 2.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
2.1.How to create or display default date and time values?
1.
create input field for DATE and TIME on screen.ex. DATE1 and TIME1 are screen field names .
2.
Just assign SY-DATUM to DATE1 and SY-UZEIT to TIME1 under PROCESS BEFORE EVENT.
3.How to create text box for giving comments?
1.
Define one variable in the TOP include with type STRING means Global variable.
2.
Create one input field by giving screen field name which u have defined in the above step.
4.How to store the records that we are entering in a table?
For this case.. Create one table control. you can select one record and create record in the Z table by pressing button on Application toolbar..
Check the following steps to handle Table control.
1).
U should take one variable in your internal table or in structure which
is used for table control fields
ex :
data :
begin of itab occurs 0 ,
mark type c , "This is to select the record.
matnr like mara-matnr ,
matkl like mara-matkl,
maktx like makt-maktx,
end of itab .
Controls: TABC types TABLEVIEW using screen 100.
2).
This mark variable should be given in Table control properties.
follow the path
double click on the table control-->attributes .->select
w/SelColumn and in that itab-mark. Check in the figure.
[Table control properties screen|http://bp2.blogger.com/_O5f8iAlgdNQ/R99gOUH8CXI/AAAAAAAAA9I/d3gOum1fJ6s/s1600-h/pic28145-796618.jpg]
3).
After that. Take this example.
PROCESS BEFORE OUTPUT.
MODULE STATUS_0100.
LOOP AT ITAB WITH CONTROL tabc
ENDLOOP.
PROCESS AFTER INPUT.
MODULE CANCEL AT EXIT-COMMAND.
LOOP AT ITAB.
Module read_table_control.
ENDLOOP.
module user_command_0100.
In this Module read_table_control, You should write the following code
MODULE read_table_control INPUT.
MODIFY itab INDEX tabc-current_line."( This will update the
"ITAB table MARK field with 'X ' whatever we have selected
"on table control.)
ENDMODULE.
4)
If you want to Delete some of the records from Table control
follow this code Create one pushbutton and give Fucnction code to that
and write below code
CASE OKCODE.
WHEN 'CREATE'.
LOOP AT itab WHERE mark = 'X'.
"Use UPDATE statement to create new record.
ENDLOOP.
ENDCASE.
I hope that you will get something.
Regards,
Venkat.O -
Fetching values from database into a drop down box
in my JSP page there are 3 drop down boxes for date of birth......
what i need is i want to get the values from database into that drop down box when i access the JSP page.......
session is there....'m getting all other values.......
I will attach the JSP page.....
Please help me...........
Thanks in Advance......
<%@ taglib uri='/WEB-INF/taglib/struts-bean.tld' prefix='bean'%>
<%@ taglib uri='/WEB-INF/taglib/struts-logic.tld' prefix='logic'%>
<%@ taglib uri='/WEB-INF/taglib/dyna.tld' prefix='dyna'%>
<%@ taglib uri='/WEB-INF/taglib/struts-html.tld' prefix='html'%>
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1" />
<title><bean:message key="page_title"/></title>
<link href="<bean:message key="context"/>/CSS/default.css" rel="stylesheet" type="text/css" />
<script src="<bean:message key="context"/>/js/AC_RunActiveContent.js" type="text/javascript"></script>
<link href="<bean:message key="context"/>/CSS/screen.css" rel="stylesheet" type="text/css" />
</head>
<body>
<%!
Membership mShip = null;
%>
<script language="javascript" >
function checkDate(Form){
var d;
d = Form.year.value+"-"+Form.month.value+"-"+Form.day.value;
alert("Date is:"+d);
Form.dob.value = d;
</script>
<table width="100%" border="0" cellspacing="0" cellpadding="0">
<tr>
<td>
<jsp:include flush="true" page="../templates/header.jsp"/> </td>
</tr>
<tr>
<td class="menuTD">
<jsp:include flush="true" page="../templates/menu.jsp"/> </td>
</tr>
<tr>
<td class="sub_menuTR"> </td>
</tr>
<tr>
<td><table width="100%" border="0" cellspacing="0" cellpadding="0">
<tr>
<td class="column" valign="top" width="170"><jsp:include flush="true" page="../templates/left_panel.jsp"/></td>
<td valign="top" align="left">
<dyna:message error="error" warning="warning" message="message"/>
<table width="100%" border="0" cellspacing="0" cellpadding="0">
<tr>
<td width="80%" valign="top" align="left">
<%
if(session != null){
mShip = (Membership)session.getAttribute("member");
%>
<form action="updateContactDetails.dy" method="post" name="form1">
<input type="hidden" name="m" value="<%=request.getParameter("m")%>" />
<table width="100%" border="0">
<tr>
<td>First Name</td>
<td><input name="first_name" type="text" id= "first_name" value = "<bean:write name = "member" property = "first_name" />" /></td>
</tr>
<tr>
<td>Last Name </td>
<td><input name="last_name" type="text" id="last_name" value = "<bean:write name = "member" property = "last_name" />" > </td>
</tr>
<tr>
<td>Address</td>
<td><input name="address1" type="text" id="address1" value = "<bean:write name = "member" property = "address1" />" ></td>
</tr>
<tr>
<td> </td>
<td><input name="address2" type="text" id="address2" value = "<bean:write name = "member" property = "address2" />" ></td>
</tr>
<tr>
<td>Suburb/City </td>
<td><input name="city" type="text" id="city" value= "<bean:write name = "member" property = "city" />" ></td>
</tr>
<tr>
<td>State/Territory</td>
<td><input type="text" name="state" value = "<bean:write name = "member" property = "state" />" ></td>
</tr>
<tr>
<td>Postcode</td>
<td><input type="text" name="postcode" value = "<bean:write name = "member" property = "postcode" />" ></td>
</tr>
<tr>
<td>Contact Phone</td>
<td><input type="text" name="home_phone" value = "<bean:write name = "member" property = "home_phone" />" ></td>
</tr>
<tr>
<td>Mobile</td>
<td><input type="text" name="mobile" value = "<bean:write name = "member" property = "mobile" />" ></td>
</tr>
<tr>
<td>Date of birth</td>
<td nowrap="nowrap"><select name="day">
<option>Day</option>
<option value="01">1</option>
<option value="02">2</option>
<option value="03">3</option>
<option value="04">4</option>
<option value="05">5</option>
<option value="06">6</option>
<option value="07">7</option>
<option value="08">8</option>
<option value="09">9</option>
<option value="10">10</option>
<option value="11">11</option>
<option value="12">12</option>
<option value="13">13</option>
<option value="14">14</option>
<option value="15">15</option>
<option value="16">16</option>
<option value="17">17</option>
<option value="18">18</option>
<option value="19">19</option>
<option value="20">20</option>
<option value="21">21</option>
<option value="22">22</option>
<option value="23">23</option>
<option value="24">24</option>
<option value="25">25</option>
<option value="26">26</option>
<option value="27">27</option>
<option value="28">28</option>
<option value="29">29</option>
<option value="30">30</option>
<option value="31">31</option>
</select>
<select name="month">
<option>Month</option>
<option value="01">January</option>
<option value="02">February</option>
<option value="03">March</option>
<option value="04">April</option>
<option value="05">May</option>
<option value="06">June</option>
<option value="07">July</option>
<option value="08">August</option>
<option value="09">September</option>
<option value="10">October</option>
<option value="11">November</option>
<option value="12">Decembber</option>
</select>
<select name="year" onChange = "checkDate(this.form);" >
<option>Year</option>
<option value="1957">1957</option>
<option value="1956">1956</option>
<option value="1955">1955</option>
<option value="1954">1954</option>
<option value="1955">1955</option>
<option value="1956">1956</option>
<option value="1957">1957</option>
<option value="1958">1958</option>
<option value="1959">1959</option>
<option value="1960">1960</option>
<option value="1961">1961</option>
<option value="1962">1962</option>
<option value="1963">1963</option>
<option value="1964">1964</option>
<option value="1965">1965</option>
<option value="1966">1966</option>
<option value="1967">1967</option>
<option value="1968">1968</option>
<option value="1969">1969</option>
<option value="1970">1970</option>
<option value="1971">1971</option>
<option value="1972">1972</option>
<option value="1973">1973</option>
<option value="1974">1974</option>
<option value="1975">1975</option>
<option value="1976">1976</option>
<option value="1977">1977</option>
<option value="1978">1978</option>
<option value="1979">1979</option>
<option value="1980">1980</option>
<option value="1981">1981</option>
<option value="1982">1982</option>
<option value="1983">1983</option>
<option value="1984">1984</option>
<option value="1985">1985</option>
<option value="1986">1986</option>
<option value="1987">1987</option>
<option value="1988">1988</option>
<option value="1989">1989</option>
<option value="1990">1990</option>
<option value="1991">1991</option>
<option value="1992">1992</option>
<option value="1993">1993</option>
<option value="1994">1994</option>
<option value="1995">1995</option>
<option value="1996">1996</option>
<option value="1997">1997</option>
<option value="1998">1998</option>
<option value="1999">1999</option>
<option value="2000">2000</option>
<option value="2001">2001</option>
<option value="2002">2002</option>
<option value="2003">2003</option>
<option value="2004">2004</option>
<option value="2005">2005</option>
<option value="2006">2006</option>
<option value="2007">2007</option>
</select ></td></tr>
<tr>
<td><input type="hidden" name = "dob" /> </td>
<td nowrap="nowrap"><input type="submit" value="Submit" /></td>
</tr>
</table>
</form>
</td>
<td width="40"></td>
<td width="200" valign="top">
<div id="headlines">
<jsp:include flush="true" page="../templates/profile.jsp"/>
</div>
</td>
</tr>
</table>
</td>
<td> </td>
</tr>
</table></td>
</tr>
<tr>
<td><jsp:include flush="true" page="../templates/footer.jsp"/></td>
</tr>
</table>
</body>
</html>i think normally u will get data from databsae as objects.they are like java beans having getter and setter methods.so you create a collection of those objects like collect all the objects coming from database into an arraylist or....
suppose you want to populate the dropdown box with say "username" from database object s, your code will look like that
<html:select property="name">
<html:options collection="databaseList" property="username" />
</html:select>
"databaseList" is collection(say.. ArrayList) of objects you are getting from database.this dropdown will contain all the "usernames" you are getting from database. -
I have version 3.6.16 and when I login to my hotmail account, and type the first letter of the email address, a drop down box appears with my hotmail address and I can choose it from that box with a click.
How do I get version 4 to do this?
Thanks.The new but not-ready-for-prime-time autocomplete method searches for matches that contain the entered text, not just ones that begin with the string. Your options are:
1) type in longer strings that narrow the search
2) use an add-on to search just the beginnings:
https://support.mozilla.org/en-US/questions/1037469
3) install an older version of TB:
http://ftp.mozilla.org/pub/mozilla.org/thunderbird/releases/
Maybe you are looking for
-
Adobe master collection cs4 setup.exe installation problem
This is frustrating. I have 30 day trial DVD from adobe, it is Master Collection CS4 and can't install it. Double clicking on setup.exe goes nowhere, just no response at all. You can see and hear DVD working, but nothing is happening, no response. I'
-
Customizing distance between data Points on x-Axis
Hi, I want to draw a LineChart. I have these Timestamps [84, 1000, 34000, 34699, 439999] who are represanting the x-Value of DataPoints along the X-Axis. Unfortunately the distance between 2 datapoints along the x-Axis is always the same, that means
-
Hi I have a list of website links which user can click on.. On click, I want to call a JSP (http://localhost:8080/abc/faces/urlprofile.jsp) which can display data related to the website. To do this, I want the website's url to be appended to my url i
-
CRM Interactive Reports show only current year data
Hello, We have configured CRM Interactive Reports for IC scenario (CRM 2007) and are using reports like 'Service Ticket Volume', 'Service Ticket Closure', etc. The issue is when we run reports (through IC_Manager business role), they only display dat
-
In xmpp-muc room, iChat spams caps-aware clients with disco#info
Situation: 1) i use tkabber xmpp/jabber client, i come into a [email protected], in <presence/> i send client capabilities with node 'caps:node' (content does not matter, i think) 2) in room there is user of iChat 3) iChat sends disco#info iq request