Mobile Broadband Connect not working on x301

Hi
I definitely cannot get mobile broadband working on my UK x301
I have a fully updated system with all the Win7 Drivers (using both System update 4 and further manual downloads) and I found a Win 7 version of Mobile Broadband Connect however when loaded it hangs on Initialising... for ages and then complains that "the sim card present on the system cannot be read"
Can anyone help please?

That has been on issue ever since RC1. The Ericsson Broadband Modem only seems to work in specific combinations of older drivers. Also not every access connections version seems to behave nicely in combination with it. My success rate in configuring those has been approx 50% and I gave up.
I did manage a 100% success rate though with all most recent drivers + the specific 7uw706ww ericsson package from the beta website.
There's one catch though. This driver seems to be capped at 384Kbps e.g. stuck in UMTS mode.
For me that's enough to last until proper drivers come out, but it is higly irritating.
Lenovo Premium Business Partner
X1 Carbon Touch | i7-3667U | 8Gb | 256Gb | HD 4000 | 14HD+ | WWAN | W8.1 Pro RTM x64 |

Similar Messages

T mobile broadband stick not working after lion instal

T mobile broadband USB stick not working after lion install

No s#!t batman.The point is a mac laptop is ment to be mobile and for it to be mobile you need a mobile broadband stick so when a new op system lion is released don't you think it would be one of the first items to be checked for compatability.with snow leopard the same problem took months before I could use a broadband stick,there is no lion connection manager software available right now until someone decides to wright it, so does anyone have a usefull fix i can use ?

[SOLVED] Huawei E173s-1 mobile broadband dongle not working

Update: check the wiki entry at https://wiki.archlinux.org/index.php/Huawei_E173s
Hi,
My dongle works out-of-the-box in Ubuntu but I can't get it to work in Arch Linux.
I followed the instructions from this site: http://www.vivaolinux.com.br/dica/Modem … s-no-Linux
/etc/usb_modeswitch.d/12d1:1c0b
DefaultVendor=0x12d1
DefaultProduct=0x1c0b
TargetVendor=0x12d1
TargetProduct=0x1c05
CheckSuccess=20
MessageEndpoint=0x0f
MessageContent="55534243123456780000000000000011062000000100000000000000000000"
/usr/lib/udev/rules.d/40-usb_modeswitch.rules
ATTRS{idVendor}=="12d1", ATTRS{idProduct}=="1c0b", RUN+="usb_modeswitch '%b/%k'"
# usb_modeswitch -c /etc/usb_modeswitch.d/12d1:1c0b
Looking for target devices ...
No devices in target mode or class found
Looking for default devices ...
found matching product ID
adding device
Found device in default mode, class or configuration (1)
Accessing device 003 on bus 001 ...
Getting the current device configuration ...
OK, got current device configuration (1)
Using first interface: 0x00
Using endpoints 0x0f (out) and 0x8f (in)
Inquiring device details; driver will be detached ...
Looking for active driver ...
OK, driver found; name unknown, limitation of libusb1
OK, driver "unkown" detached
SCSI inquiry data (for identification)
Vendor String: HUAWEI
Model String: Mass Storage
Revision String: 2.31
USB description data (for identification)
Manufacturer: HUAWEI
Product: HUAWEI Mobile
Serial No.: not provided
Setting up communication with interface 0
Using endpoint 0x0f for message sending ...
Trying to send message 1 to endpoint 0x0f ...
OK, message successfully sent
Resetting response endpoint 0x8f
Resetting message endpoint 0x0f
Device is gone, skipping any further commands
Checking for mode switch (max. 20 times, once per second) ...
Searching for target devices ...
Searching for target devices ...
Searching for target devices ...
Searching for target devices ...
Searching for target devices ...
Searching for target devices ...
found matching product ID
adding device
Found target device, now opening
Found correct target device
Mode switch succeeded. Bye.
# modprobe usbserial vendor=0x12d1 product=0x1c0b
But when I run wvdialconf it can't find the modem:
Editing `/etc/wvdial.conf'.
Scanning your serial ports for a modem.
Sorry, no modem was detected! Is it in use by another program?
Did you configure it properly with setserial?
Please read the FAQ at [url]http://alumnit.ca/wiki/?WvDial[/url]
As a result I'm stuck with Ubuntu for the time being. ;( Any help would be very appreciated.
Edit: running sakis3g after doing the above I was able to connect but I'd still love to know how to to make it work manually with wvdial.
Last edited by jasewobble (2012-04-22 22:25:22)

Hi
Thanks for the advice above. Initially cleaned off original app
I removed the software application from Mac HD/Applications/Orange Mobile Partner
The kernel extension located at Mac HD/System/Library/Extensions/HuaweiDataCardDriver.kext
The modem script located at Mac HD/Library/Modem Scripts/HUAWEI Mobile Connect – 3G Modem
Then dragged the Orange MobilePartner file to the HD, selected 'Show Package Contents' and followed the advice above opening the .mpkg.
Was about to try and return the dongle, but now after several tests, am sure it works
Another Apple Discussion Board success

Orange Huawei E160E Mobile Broadband Dongle - NOT WORKING NOW!

Well as you can see from the title - i've just upgraded to Snow Leopard over the weekend - and love the 16GB of harddrive space I got back, however I came you use my Orange Huawei E160E Mobile Broadband USB Modem 'Dongle' and it doesn't work.
25 mins on the phone to Orange Tech Support, and they tell me 'sorry we can't do anymore' & 'thats what you get for being on the cutting edge of technology'!!!
Apple Care told me to install Rosetta - and still NO good!
Any ideas?

Hi
Thanks for the advice above. Initially cleaned off original app
I removed the software application from Mac HD/Applications/Orange Mobile Partner
The kernel extension located at Mac HD/System/Library/Extensions/HuaweiDataCardDriver.kext
The modem script located at Mac HD/Library/Modem Scripts/HUAWEI Mobile Connect – 3G Modem
Then dragged the Orange MobilePartner file to the HD, selected 'Show Package Contents' and followed the advice above opening the .mpkg.
Was about to try and return the dongle, but now after several tests, am sure it works
Another Apple Discussion Board success

Mobile broadband (un2430) not working with Windows 10 on Folio 9470m

I have had Windows 10 installed on my HP Folio 9470m since October last year (insider program). One thing that I never been able to get to work is the mobile broadband device (un2430). It simply says "Radio off". All attempts to re-install driver (which shows as "working"), disable/enable the device etc etc just leads to same result, that the "Radio is off".I googled this a couple of times and found that other users have the same problem. Also colleagues of mine with same model has also the same problem. It works just fine under Windows 8.1. Anyone has a workaround? I was really disappointed when W10 was released that HP did not update the drivers-page with W10 drivers:http://h20566.www2.hp.com/hpsc/swd/public/readIndex?sp4ts.oid=5271102 How can I find out when/if HP will release W10 drivers, including support for mobile broadband, for the HP Folio 9470m?

Thank you for your reply. I've tryed several SIM cards, and arrived to the conclusion that it doesn't work with portuguese operator TMN (all the SIM i've tried from TMN lead to the same result)!
I guess that there is some misconfiguration on WM config files. I found one xml with default configuration for worldwide carriers, and maybe it is possible to change some of those parameters to make it work... I just don't know wich one!
Maybe I'll have some luck, of someone reading this, and that is able to give me a tip to solve the problem.
The SIM card just work well on a 3G usb stick, or even in a celular phone!
Thank you again.

Mobile Broadband does not work on HP mini 110

This is the my device:
$ lsusb | grep Gobi
Bus 001 Device 077: ID 03f0:1f1d Hewlett-Packard un2400 Gobi Wireless Modem
sometimes another result:
$ lsusb | grep Gobi
Bus 001 Device 020: ID 03f0:201d Hewlett-Packard un2400 Gobi Wireless Modem (QDL mode)
I have installed in my netbook with these steps:
1. Install network manager: networkmanager, network-manager-applet. Then systemctl enable, start NetworkManager.service
Run "sudo NetworkManager".
2. Install BCM4312 and Hp un2400 gobi firmwares: b43-fwcutter. And b43-firmware, gobi-loader, gobi-firmware from AUR
Here is my /lib/udev/rules.d/60-gobi.rules, i have added the red line:
# udev rules for firmware loading on qualcomm gobi devices
ACTION=="add", SUBSYSTEM=="tty" KERNEL=="ttyUSB*" GOTO="gobi_rules"
GOTO="gobi_rules_end"
LABEL="gobi_rules"
ATTRS{idVendor}=="05c6", ATTRS{idProduct}=="9211", RUN+="gobi_loader $env{DEVNAME} /usr/lib/firmware/gobi"
ATTRS{idVendor}=="03f0", ATTRS{idProduct}=="201d", RUN+="gobi_loader $env{DEVNAME} /usr/lib/firmware/gobi"
ATTRS{idVendor}=="03f0", ATTRS{idProduct}=="1f1d", RUN+="gobi_loader $env{DEVNAME} /usr/lib/firmware/gobi"
ATTRS{idVendor}=="04da", ATTRS{idProduct}=="250c", RUN+="gobi_loader $env{DEVNAME} /usr/lib/firmware/gobi"
ATTRS{idVendor}=="413c", ATTRS{idProduct}=="8171", RUN+="gobi_loader $env{DEVNAME} /usr/lib/firmware/gobi"
ATTRS{idVendor}=="1410", ATTRS{idProduct}=="a008", RUN+="gobi_loader $env{DEVNAME} /usr/lib/firmware/gobi"
ATTRS{idVendor}=="0b05", ATTRS{idProduct}=="1774", RUN+="gobi_loader $env{DEVNAME} /usr/lib/firmware/gobi"
ATTRS{idVendor}=="19d2", ATTRS{idProduct}=="fff2", RUN+="gobi_loader $env{DEVNAME} /usr/lib/firmware/gobi"
ATTRS{idVendor}=="1557", ATTRS{idProduct}=="0a80", RUN+="gobi_loader $env{DEVNAME} /usr/lib/firmware/gobi"
ATTRS{idVendor}=="05c6", ATTRS{idProduct}=="9008", RUN+="gobi_loader $env{DEVNAME} /usr/lib/firmware/gobi"
ATTRS{idVendor}=="05c6", ATTRS{idProduct}=="9201", RUN+="gobi_loader $env{DEVNAME} /usr/lib/firmware/gobi"
ATTRS{idVendor}=="05c6", ATTRS{idProduct}=="9221", RUN+="gobi_loader $env{DEVNAME} /usr/lib/firmware/gobi"
ATTRS{idVendor}=="05c6", ATTRS{idProduct}=="9231", RUN+="gobi_loader $env{DEVNAME} /usr/lib/firmware/gobi"
ATTRS{idVendor}=="1f45", ATTRS{idProduct}=="0001", RUN+="gobi_loader $env{DEVNAME} /usr/lib/firmware/gobi"
ATTRS{idVendor}=="16d8", ATTRS{idProduct}=="8001", RUN+="gobi_loader -2000 $env{DEVNAME} /usr/lib/firmware/gobi"
ATTRS{idVendor}=="1199", ATTRS{idProduct}=="9000", RUN+="gobi_loader -2000 $env{DEVNAME} /usr/lib/firmware/gobi"
ATTRS{idVendor}=="03f0", ATTRS{idProduct}=="241d", RUN+="gobi_loader -2000 $env{DEVNAME} /usr/lib/firmware/gobi"
ATTRS{idVendor}=="05c6", ATTRS{idProduct}=="9204", RUN+="gobi_loader -2000 $env{DEVNAME} /usr/lib/firmware/gobi"
ATTRS{idVendor}=="05c6", ATTRS{idProduct}=="9214", RUN+="gobi_loader -2000 $env{DEVNAME} /usr/lib/firmware/gobi"
ATTRS{idVendor}=="05c6", ATTRS{idProduct}=="9224", RUN+="gobi_loader -2000 $env{DEVNAME} /usr/lib/firmware/gobi"
ATTRS{idVendor}=="05c6", ATTRS{idProduct}=="9234", RUN+="gobi_loader -2000 $env{DEVNAME} /usr/lib/firmware/gobi"
ATTRS{idVendor}=="05c6", ATTRS{idProduct}=="9244", RUN+="gobi_loader -2000 $env{DEVNAME} /usr/lib/firmware/gobi"
ATTRS{idVendor}=="05c6", ATTRS{idProduct}=="9264", RUN+="gobi_loader -2000 $env{DEVNAME} /usr/lib/firmware/gobi"
ATTRS{idVendor}=="05c6", ATTRS{idProduct}=="9274", RUN+="gobi_loader -2000 $env{DEVNAME} /usr/lib/firmware/gobi"
ATTRS{idVendor}=="413c", ATTRS{idProduct}=="8185", RUN+="gobi_loader -2000 $env{DEVNAME} /usr/lib/firmware/gobi"
LABEL="gobi_rules_end"
3. Install wireless: wpa_supplicant, wireless_tools, gnome-keyring.
Then systemctl enable and start wpa_supplicant.service
4. Install modem manager: usbutils, usb_modeswitch, modemmanager, mobile-broadband-provider-info
Then systemctl enable and start ModemManager
After reboot, i get this log keep being repeat forever:
$ dmesg | grep ttyUSB
[ 8.783499] usb 1-6: Qualcomm USB modem converter now attached to ttyUSB0
[ 13.924825] qcserial ttyUSB0: usb_wwan_indat_callback: resubmit read urb failed. (-19)
[ 13.925166] qcserial ttyUSB0: usb_wwan_indat_callback: resubmit read urb failed. (-19)
[ 13.925490] qcserial ttyUSB0: usb_wwan_indat_callback: resubmit read urb failed. (-19)
[ 13.925813] qcserial ttyUSB0: usb_wwan_indat_callback: resubmit read urb failed. (-19)
[ 13.926887] qcserial ttyUSB0: Qualcomm USB modem converter now disconnected from ttyUSB0
[ 15.560838] usb 1-6: Qualcomm USB modem converter now attached to ttyUSB0
[ 15.562758] usb 1-6: Qualcomm USB modem converter now attached to ttyUSB1
[ 17.869672] qcserial ttyUSB0: usb_wwan_indat_callback: resubmit read urb failed. (-19)
[ 17.869883] qcserial ttyUSB0: usb_wwan_indat_callback: resubmit read urb failed. (-19)
[ 17.870123] qcserial ttyUSB0: usb_wwan_indat_callback: resubmit read urb failed. (-19)
[ 17.870366] qcserial ttyUSB0: usb_wwan_indat_callback: resubmit read urb failed. (-19)
[ 17.872845] qcserial ttyUSB1: usb_wwan_indat_callback: resubmit read urb failed. (-19)
[ 17.873762] qcserial ttyUSB0: Qualcomm USB modem converter now disconnected from ttyUSB0
[ 17.874305] qcserial ttyUSB1: usb_wwan_indat_callback: resubmit read urb failed. (-19)
[ 17.874560] qcserial ttyUSB1: usb_wwan_indat_callback: resubmit read urb failed. (-19)
[ 17.874813] qcserial ttyUSB1: usb_wwan_indat_callback: resubmit read urb failed. (-19)
[ 17.875605] qcserial ttyUSB1: Qualcomm USB modem converter now disconnected from ttyUSB1
[ 18.845277] usb 1-6: Qualcomm USB modem converter now attached to ttyUSB0
[ 22.616332] qcserial ttyUSB0: usb_wwan_indat_callback: resubmit read urb failed. (-19)
[ 22.616698] qcserial ttyUSB0: usb_wwan_indat_callback: resubmit read urb failed. (-19)
[ 22.617055] qcserial ttyUSB0: usb_wwan_indat_callback: resubmit read urb failed. (-19)
[ 22.617385] qcserial ttyUSB0: usb_wwan_indat_callback: resubmit read urb failed. (-19)
[ 22.618447] qcserial ttyUSB0: Qualcomm USB modem converter now disconnected from ttyUSB0
[ 23.560845] usb 1-6: Qualcomm USB modem converter now attached to ttyUSB0
[ 23.562771] usb 1-6: Qualcomm USB modem converter now attached to ttyUSB1
Am i missing any configuration or installation?
Last edited by princenguyen (2014-06-19 06:30:17)

Hello,
Did you find a solution because I am having the same issue with my Sony Vaio SA. It has a Gobi 2000 and works perfectly on Ubuntu 14.04 and all other distributions I have tried so i know the hardware is fine.
I dont get the message repeating although I can get it like that by using the firmware from the AUR. If I use the firmware I got from my previous Windows installation then the error only occurs when turning the device on. This is so annoying
I get the following:
NetworkManager[1787]: <info> (wwp0s26u1u4): DHCPv4 state changed nbi -> preinit
Jul 08 23:40:11 Raspberry dhcpcd[5345]: wwp0s26u1u4: soliciting an IPv6 router
Jul 08 23:40:12 Raspberry dhcpcd[5345]: wwp0s26u1u4: soliciting a DHCP lease
Jul 08 23:40:12 Raspberry kernel: qmi_wwan 1-1.4:1.0: nonzero urb status received: -71
Jul 08 23:40:12 Raspberry kernel: qmi_wwan 1-1.4:1.0: wdm_int_callback - 0 bytes
Jul 08 23:40:12 Raspberry kernel: usb 1-1.4: USB disconnect, device number 9
Jul 08 23:40:12 Raspberry kernel: qcserial ttyUSB0: usb_wwan_indat_callback: resubmit read urb failed. (-19)
Jul 08 23:40:12 Raspberry kernel: qcserial ttyUSB1: usb_wwan_indat_callback: resubmit read urb failed. (-19)
Jul 08 23:40:12 Raspberry dhcpcd[3049]: if_managelink: No such device or address
Jul 08 23:40:12 Raspberry dhcpcd[5345]: wwp0s26u1u4: dhcp if_readrawpacket: Network is down
Jul 08 23:40:12 Raspberry kernel: qmi_wwan 1-1.4:1.0 wwp0s26u1u4: unregister 'qmi_wwan' usb-0000:00:1a.0-1.4, WWAN/QMI device
Jul 08 23:40:12 Raspberry kernel: qcserial ttyUSB0: usb_wwan_indat_callback: resubmit read urb failed. (-19)
Jul 08 23:40:12 Raspberry ModemManager[1785]: <info> (net/wwp0s26u1u4): released by modem /sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4
Jul 08 23:40:12 Raspberry kernel: qcserial ttyUSB1: usb_wwan_indat_callback: resubmit read urb failed. (-19)
Jul 08 23:40:12 Raspberry kernel: qcserial ttyUSB0: usb_wwan_indat_callback: resubmit read urb failed. (-19)
Jul 08 23:40:12 Raspberry kernel: qcserial ttyUSB1: usb_wwan_indat_callback: resubmit read urb failed. (-19)
Jul 08 23:40:12 Raspberry dhcpcd[5345]: if_managelink: No such device or address
Jul 08 23:40:12 Raspberry kernel: qcserial ttyUSB0: usb_wwan_indat_callback: resubmit read urb failed. (-19)
Jul 08 23:40:12 Raspberry kernel: qcserial ttyUSB1: usb_wwan_indat_callback: resubmit read urb failed. (-19)
Jul 08 23:40:12 Raspberry ModemManager[1785]: <info> (usbmisc/cdc-wdm1): released by modem /sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4
Jul 08 23:40:12 Raspberry ModemManager[1785]: <info> (tty/ttyUSB1): released by modem /sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4
Jul 08 23:40:12 Raspberry ModemManager[1785]: <info> (tty/ttyUSB2): released by modem /sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4
Jul 08 23:40:12 Raspberry ModemManager[1785]: <info> (tty/ttyUSB0): released by modem /sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4
Jul 08 23:40:12 Raspberry ModemManager[1785]: [/dev/cdc-wdm1] Releasing 'wds' client with flags 'release-cid'...
Jul 08 23:40:12 Raspberry ModemManager[1785]: [/dev/cdc-wdm1] Unregistered 'wds' client with ID '1'
Jul 08 23:40:12 Raspberry ModemManager[1785]: [/dev/cdc-wdm1] Releasing 'pds' client with flags 'release-cid'...
Jul 08 23:40:12 Raspberry ModemManager[1785]: [/dev/cdc-wdm1] Unregistered 'pds' client with ID '1'
Jul 08 23:40:12 Raspberry ModemManager[1785]: [/dev/cdc-wdm1] Releasing 'wms' client with flags 'release-cid'...
Jul 08 23:40:12 Raspberry ModemManager[1785]: [/dev/cdc-wdm1] Unregistered 'wms' client with ID '1'
Jul 08 23:40:12 Raspberry ModemManager[1785]: [/dev/cdc-wdm1] Releasing 'nas' client with flags 'release-cid'...
Jul 08 23:40:12 Raspberry ModemManager[1785]: [/dev/cdc-wdm1] Unregistered 'nas' client with ID '1'
Jul 08 23:40:12 Raspberry ModemManager[1785]: [/dev/cdc-wdm1] Releasing 'dms' client with flags 'release-cid'...
Jul 08 23:40:12 Raspberry ModemManager[1785]: [/dev/cdc-wdm1] Unregistered 'dms' client with ID '1'
Jul 08 23:40:12 Raspberry NetworkManager[1787]: <info> (cdc-wdm1): device state change: ip-config -> unmanaged (reason 'removed') [70 10 36]
Jul 08 23:40:12 Raspberry NetworkManager[1787]: <info> (cdc-wdm1): deactivating device (reason 'removed') [36]
Jul 08 23:40:12 Raspberry dhcpcd[5345]: received signal TERM from PID 1787, stopping
Jul 08 23:40:12 Raspberry dhcpcd[5345]: wwp0s26u1u4: removing interface
Jul 08 23:40:12 Raspberry kernel: qcserial ttyUSB0: Qualcomm USB modem converter now disconnected from ttyUSB0
Jul 08 23:40:12 Raspberry kernel: qcserial 1-1.4:1.1: device disconnected
Jul 08 23:40:12 Raspberry kernel: qcserial ttyUSB1: Qualcomm USB modem converter now disconnected from ttyUSB1
Jul 08 23:40:12 Raspberry kernel: qcserial 1-1.4:1.2: device disconnected
Jul 08 23:40:12 Raspberry kernel: qcserial ttyUSB2: Qualcomm USB modem converter now disconnected from ttyUSB2
Jul 08 23:40:12 Raspberry kernel: qcserial 1-1.4:1.3: device disconnected
Jul 08 23:40:13 Raspberry dhcpcd[5345]: exited

Why gnome-ppp establish mobile broadband connection,not networkmanager

I am using usb radio modem AirPlus MCD-650 on my summer cottage and trying to setup internet. I have both Ununtu and Archlinux partitions, but prefer to use Arch, because my computer is too old for heavy Ubuntu OS.
There is no problem to connect to internet from ubuntu network-manager-applet in Gnome panel (which uses networkmanager daemon), even from LiveCD. But in Archlinux, following instructions on http://wiki.archlinux.org/index.php/Network_manager fails to succed. But another way: to use gnome-ppp program (graphic interface for wvdial) establishes connection. I prefer first way as less "clickable" and wonder if somebody can explaim me my mistakes.
As I noticed, in Ubuntu there are both lines in right-click network-manager-applet menu
1)Enable networking
2)Enable mobile broadband
but in Arch only first one in this place. May be it can help.
Last edited by roina (2010-07-03 16:58:37)

let me tell you what happens to me on a mobile usb.
first is trying to mount a partition and i have to go in Applications->System Tools->Disk utility and umount that disk. after a moment i can use it in network manager and is listening the new network and "enable mobile broadband"
i think they got a udev rule or something to stopping mounting that partition, where is the driver for windows/mac
Last edited by wonder (2010-07-03 21:54:50)

WIFI and mobile data connections not connecting with any other outside WIFI networks. Bluetooth not working in car. Any solution?

After installed iOS7 I am facing the following two problems:
1. WIFI as well as mobile data connection are working fine at my home. But, not connecting with any other outside WIFI networks. Error message is 'unable to join network'. Mobile data also not connected outside my home. Sometimes wifi and mobile data connect outside my home when I turn off and on the phone.
2. Bluetooth, in my car, paires well and incoming and out going calls can be received and made. The problem is no sound out put from speakers.
Apple please make note of the above problems (of million people) and give solution before giving any other updations for painting and tinkering the screens.

Check this thread, the same solution might work for you:
http://discussions.nokia.com/t5/Nseries-and-Symbian-Smartphones/N8-111-040-1511-Wifi-and-mobiledata-...

Hi, My Lightroom CC is showing waiting for connection and the mobile sync is not working. I have tried deleteing lrsync data, disabling firewall, checked host file etc. Still no luck.

Hi, My Lightroom CC is showing waiting for connection and the mobile sync is not working. I have tried deleteing lrsync data, disabling firewall, checked host file etc. Still no luck.

I had the same problem. It fixed itself when I opened Internet Explorer (I don't normally use it). I was opening Support Portal to get some support help, but I'm not sure if it was the page or simply opening IE that did the trick.

Networkmanager: mobile broadband doesn't work anymore

Hi,
I had setup a mobile broadband connection for my Nokia N900, connected via USB, with the NetworkManager (Gmome 3) two or three weeks ago. It worked perfect. Yeserday I tried the internet connection again - after a couple of rolling updates (e.g. actual NetworkManager 0.8.999-1). Now, the internet connection doesn't work anymore.
NetworkManager --no-daemon prints out the following:
NetworkManager[2944]: <info> Activation (ttyACM0) starting connection 'n900'
NetworkManager[2944]: <info> (ttyACM0): device state change: disconnected -> prepare (reason 'none') [30 40 0]
NetworkManager[2944]: <info> Activation (ttyACM0) Stage 1 of 5 (Device Prepare) scheduled...
NetworkManager[2944]: <info> Activation (ttyACM0) Stage 1 of 5 (Device Prepare) started...
NetworkManager[2944]: <info> Activation (ttyACM0) Stage 1 of 5 (Device Prepare) complete.
NetworkManager[2944]: <warn> GSM modem enable failed: (32) Serial command timed out
NetworkManager[2944]: <info> (ttyACM0): device state change: prepare -> failed (reason 'modem-init-failed') [40 120 28]
NetworkManager[2944]: <warn> Activation (ttyACM0) failed.
NetworkManager[2944]: <info> (ttyACM0): device state change: failed -> disconnected (reason 'none') [120 30 0]
NetworkManager[2944]: <info> (ttyACM0): deactivating device (reason: 0).
It seems, the modem cannot be initialized
Using wvdial with the N900, the internet connection works still fine.
What is the problem? Any ideas?
Last edited by thesofty (2011-05-11 08:48:56)

Hi,
I managed to solve. Only the downgrade did not work. My solution:
1-Create the directory (if not existing)
/var/lock
2-Do not use package:
kdeplama-network-management
3-Use the package (downgrade)
extra/modemmanager 0.4-1 [instalado: 0.4-1]
http://arm.konnichi.com/2011/04/30/extr … pkg.tar.xz
4-Use the pachage (gnome)
network-manager-applet
5-Add dbus policy (If the file nm-applet.conf does not exist, create!)
https://bbs.archlinux.org/viewtopic.php … 39#p484839
[root@DESTINY log]# cat /etc/dbus-1/system.d/nm-applet.conf
<!DOCTYPE busconfig PUBLIC
"-//freedesktop//DTD D-BUS Bus Configuration 1.0//EN"
"http://www.freedesktop.org/standards/dbus/1.0/busconfig.dtd">
<busconfig>

<policy user="root">
<allow own="org.freedesktop.NetworkManagerUserSettings"/>
<allow send_destination="org.freedesktop.NetworkManagerUserSettings"
send_interface="org.freedesktop.NetworkManagerSettings"/>
<allow send_destination="org.freedesktop.NetworkManagerUserSettings"
send_interface="org.freedesktop.NetworkManagerSettings.Connection"/>

<allow send_destination="org.freedesktop.NetworkManagerUserSettings"
send_interface="org.freedesktop.NetworkManagerSettings.Connection.Secrets"/>
</policy>

<policy group="network">
<allow own="org.freedesktop.NetworkManagerUserSettings"/>
<allow send_destination="org.freedesktop.NetworkManagerUserSettings"/>
<allow send_interface="org.freedesktop.NetworkManagerUserSettings"/>
<deny send_interface="org.freedesktop.NetworkManagerSetting.Secrets"/>
</policy>

<policy at_console="true">
<allow own="org.freedesktop.NetworkManagerUserSettings"/>
<allow send_destination="org.freedesktop.NetworkManagerUserSettings"
send_interface="org.freedesktop.NetworkManagerSettings"/>
<allow send_destination="org.freedesktop.NetworkManagerUserSettings"
send_interface="org.freedesktop.NetworkManagerSettings.Connection"/>
</policy>
<policy context="default">
<allow send_destination="org.freedesktop.NetworkManagerUserSettings"
send_interface="org.freedesktop.DBus.Introspectable"/>
</policy>
<limit name="max_replies_per_connection">512</limit>
</busconfig>
For information look this file
tail -f /var/log/message
tail -f /var/log/erros.log
Last edited by FZ (2011-05-15 00:34:07)

Droid A855 mobile broadband connect

So I am in need of using my droid as a mobile broadband connect to hook up to my laptop and it gave me the option to select it as a service (for $20) but I am not sure now how exactly to get it to sign on and what to do next? Is there a place to download instructions or do I just go into my settings and try it through there? I am so lost...sorry...

Good morning.
To use the Mobile Broadband Connect, you will need a USB cable, and you will also need a copy of VZAccess Manager. This is included in the Mobile Office Kit, BlackBerry / Smartphone box, or can be downloaded from www.vzam.net. Once it is downloaded successfully, you will be able to connect your Droid using the USB cable, to your PC or laptop. You will open VZAccess Manager, and then connect. You can also use this link for instructions to use VZAccess Manager.
If you need additional instructions or assistance, please send me a Private Message and I will be happy to assist you further.
Thank you,

Lenovo Mobile Broadband Connection Manager for Windows 7 - ThinkPad

Hello
i want to ask a Question , why Lenovo Still did not make
(Lenovo Mobile Broadband Connection Manager for Windows 7 - ThinkPad ) ??!!!
i look at the Drivers PageAnd i only found this : For windows VISTA and XP :
http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-70946
BUT , Where is WINDOWS 7 VERSION ????!!!!!!!!, What are they doing all this time ???
is this the Support which Lenoveo Give to there Customers? , i hope not .
I am asking lenovo to give me as a Customers , the software i need as fast as possible .
Greeting,
Al-allan Alaa
Solved!
Go to Solution.

Try this URL:
http://support.lenovo.com/en_US/downloads/detail.page?DocID=HT037696#broadband
-gan

Sbi mobile banking is not working in iphone4. i can't make video call to other than iphone4

sbi mobile banking is not working in iphone4. i can't make video call to other than iphone4

What troubleshooting steps have you tried? Have you tried resetting the iPhone? or restoring it?

Camera connection not working with my camera

Camera connect not working with my Sony boggie camera

The Bloggie will not work because it draws too much power from the USB port on the iPad. The solution is to interpose a powered USB hub between the Bloggie and the iPad - connect the Bloggie to the powered hub, then connect the hub to the ipad accessory. Works fine with my 3D Bloggie.

The apple mobile device is not working on the ipad. how can i fix it?

My apple mobile device is not working on my ipad and my itunes dosn't work now. How can I fix it?

Try:
- iOS: Not responding or does not turn on
- If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.

Mobile Broadband Connect not working on x301

Similar Messages

Maybe you are looking for