Mobile devices which support SAP Netweaver Mobile 7.1

Hi all,
I would like to know what are all the mobile devices which would support application made of Netweaver Mobile.
According to my knowledge the following devices support, sorry PDA's support:
PPC 2003
PPC 2005
Mobile 6.0
My question is will normal mobile phones like Nokia or Sony ericsson will or will not support applications based on Netweaver Mobile.
If not why? any specific reasons.
My client is asking me these all Questions.
Kindly help me here.
Thanks.

Hi Rahul,
well, I understand the reason for your question, but I think it is not that easy.
Sure, there are other JVM available for Mobile devices. Take J9 from IBM for example. But the problem is: every vendort has his own implementation, toolset, supports Swing or not,.... Well, sometimes it is just a small thing that is not working in one JVM that works fine on the other one and MI fails. With MI7.1 it gets a little more problematic. Up to version 7.0 MI supported Creme 3.xx based on JRE1.1.8. Starting with MI7.1 SAP supports the latest creme version that is compatible to JRE1.4. There are only a few JVM outside for the PDA supporting JRE1.4 and all this comes to the single sentence at the end:
SAP supports only Creme - because it is only tested with creme.
The min requirement is in the first place to be able to run Creme on the device. If this is ok, you should have 128MB RAM - I have not done any tests with MI7.1 on devices with less memory, but I got some issues with 7.0 MI and 64MB RAM.
Well, at the end this is it to run MI occasionally connected.
But if you need to run an App on the PDA and you do not need data storeage on the device cause you will be always online when you use the app - try WebDynproMobile. This runs in the browser, runs on the Mobile phone by my knowledge and could help you perhaps. If you are not always online and so you need data on the device, I think you need to go with PDAs.
Hope this helps.
Regards,
Oliver

Similar Messages

  • RFID Addon which support SAP B1

    Hi,
    One of my cusotmer wants to implements RFID in SAP B1.
    Kindly tell me the addon which support the RFID in SAP B1.
    If possible provide the documentation for the same.
    Regards,
    Gunjan Shukla.

    Hi vijay,
    Check this
    http://www.sap.com/partners/directories/SearchSolution.epx and look under AII-DC-RFID 1.0 u2013 Auto ID Infrastr. Device Controller 1.0.
    OR
    http://www.sap.com/ecosystem/customers/directories/ProductSearchResults.epx?context=21B87D61C0F646A22B2A6DB254A010CA8C9C141B7529F02972463D54EC8217D707ADFB1B61328B27A6200891D1824987C4A2286C415FA5583A680E633FB258D6F702338D4AE86843C5ADEB30E7160581899BB4603C9793EC%7c340236E25FA0CB7D55B412C7D619D9145637D00350BF5E7252AE3D635139EE29F2E773C21D61F3C628E6641C68D965A961E924180F425F3FB48176F04101324CE205C8C3C132479A49D11318234269D36908F39C6F4B37B6A9C80DB2F7715F8677923A8F9F1BEBC61512000CAE2C5C98
    Regards
    Jambulingam.P

  • PDA model's supporting SAP CRM 2007

    Please guide which are the PDA model's which support SAP CRM2007.
    Regards,
    Rajesh Banka

    Hi,
    this looks like CRM HH for Sales which has much less functionality than MSA on laptop.
    Therefore I suggest you to put your request in the forum
    SAP NetWeaver -> Mobile
    as this covers the MI (Mobile infrastructure) related topics.
    Regards,
    Wolfhard

  • JSR-168 Portlets will work on SAP NetWeaver ?

    Hi,
    I would like to confirm with you whether JSR-168 Portlets will work on SAP NetWeaver platform or they work on specific versions of SAP NetWeaver and I would appreciate if you could kindly confirm on these points.
    “As per my knowledge it supports SAP NetWeaver '05'.”
    Is the SAP NetWeaver '05' version available for SAP Service Marketplace?
    Or do they provide any plug-in to support JSR-168 portlets.
    So please provide me detailed information for the above query and that would be greatly appreciated.
    Thanks & Regards
    Siva

    Hi Siva,
    JSR-168 will be available with the next major version of SAP NetWeaver, which should be out next year. For the time being, there's a preview of the J2EE stack that will be part of the next NW version. You can download it here: https://www.sdn.sap.com/irj/sdn/downloads?rid=/library/uuid/da699d27-0b01-0010-99b0-f11458f31ef2
    Note: this preview supports the JSR-168 as runtime. However, it does not include portal, so you can't actually "consume" the portlet components. However, if you have portlets available, you can at least try deployment to the web container...
    Hope that helps!

  • Obtaining the SAP NetWeaver version programmatically

    Hello,
    Can anyone tell me if (and how) I can obtain the version of the SAP NetWeaver application server from a Java program?
    I have an application running on several platforms, one of which is SAP NetWeaver. The application has a system information page in which we show system information like OS, RDBMS, etc. I would also like to add the name and version of the application server the application is running on.
    Any help is greatly appreciated.
    Thanks!

    Thank you for your response, but that's not exactly what I'm after.
    What I would like to know is how to obtain the version through a Java program.
    On e.g. JBoss this is easily done by using an MBean, retrieving the version:
        MBeanServerConnection server = (MBeanServerConnection)new InitialContext().lookup("jmx/rmi/RMIAdaptor");
        ObjectName on = new ObjectName("jboss.system:type=Server");
        Object version = server.getAttribute(on, "VersionNumber");
    I would like to use something similar for running on the SAP NetWeaver server.
    Edited by: lfeijtel on Feb 10, 2011 11:22 AM

  • Whether JSR-168 Portlets will work on SAP NetWeaver

    Hi,
    I would like to confirm with you whether JSR-168 Portlets will work on SAP NetWeaver platform or they work on specific versions of SAP NetWeaver and I would appreciate if you could kindly confirm on these points.
    “As per my knowledge it supports SAP NetWeaver '05'.”
    Is the SAP NetWeaver '05' version available for SAP Service Marketplace?
    Or do they provide any plug-in to support JSR-168 portlets.
    So please provide me detailed information for the above query and that would be greatly appreciated.
    Thanks & Regards
    Siva

    Hi Siva,
    I have written a weblog on this.
    SAP Netweaver Portal & JSR 168 - Engaged but Not Married !!
    JSR 168 is still not supported in NW'04. NW '05 is not out yet. No plugin support. However I read somewhere on converting JSR 168 compliant Portlets into SAP supported iViews. I will find and send you information.
    Regards,
    Piyush
    ps: if this is useful, please award points.

  • Does SAP Netweaver Mobile support integration with devices like Intermec?

    Hi All,
    We have a scenario where the customer is currently using SAP Console based approach for RF transaction related requirement. The device used is Intermec CK31 for barcode scanning and updating the data in the SAP backend. Some example scenarios are Goods Issue & Scrap. Since the SAP Console based approach does not support Offline mode, the customer is interested in evaluating the option of using SAP Netweaver Mobile for the solution.
    Related to this requirement, we have the following queries.
    1)  Does SAP Netweaver Mobile support Intermec CK31 device without a product like Mobile Factory. What are the pros and cons in this approach of using SAP Netweaver Mobile only? If yes, are there any documentation how this can be accomplished?
    2) Are there simulators for Intermec scanning devices like Intermec CK31 to be used while application development?
    3)  Can Mobile Factory be used for implementing this requirement? Can it support offline scenarios without SAP Netweaver Mobile? Does Mobile Factory provide Simulators for the devices such as Intermec CK31 for application development?
    An early response would be greatly appreciated as we are in the process of evaluating a right approach for the customeru2019s requirement and the same needs to be provided soon.
    Thanks in advance.
    Suresh

    Hi,
    Refer to note 1057759 for the delivered Drivers for Peripherals  and devices supported in SAP DOE. This lists all the supported barcode scanners for SAP Netweaver Mobile. Those derivers are certified after testing to work only with that device and OS configuration.
    Regards,
    Suma

  • Difference between SAP Netweaver PI and SAP Netweaver Mobile and SAP DOE

    HI,
    I am learning Sybase Unwired Platform  and SAP PI 7.1.  I was going through SUP and SAP configuration documentation. I am really confused at one point. Does this SAP Netweaver PI 7.1 and SAP Netweaver Mobile 7.1 are same?. What is these DOE connector? is these DOE and SAP Netweaver Mobile 7.1are same? .
    I have gone through various documents. but still i am very much confused. I am very much new to this platforms.
    Can any one please help me in above topics.

    Yes latest version is Netweaver mobile 7.1. and in one of the documentation of Netweaver 7.3 it is said that,
    to download the non-ABAP software that is relevant for SAP NetWeaver Mobile 7.3.
    http://service.sap.com/swdc -->  Downloads --> Support Packages and Patches --> Support Packages and Patched u2014 Entry by Application Group --> SAP NetWeaver and complementary products --> SAP NETWEAVER MOBILE --> SAP NETWEAVER MOBILE 7.3 --> Entry by Component --> Mobile Client --> NW MOBILE CLIENT SETUP 7.3 .
    Actually my problem is, I am unable to get DOE Setup.exe file. I am able to download only .SAR file. If i configure SUP with SAP Netweaver mobile 7.1. i need to install DOE seperatly.
    In one of the forum, it is said that
    if we want to use CRM mobile, we need the following landscape to deploy it (for example):
    1.) ECC Backend (your CRM Backend, off course you need this)
    2.) Netweaver Mobile 7.3 (This is the DOE part, including ESDMA)
    3.) Sybase SUP
    Well, you need to connect SUP and NWM7.1 together. To do this you need to install a DOE-Connector in Sybase. The NWM7.3 contains the counter part to DOE-C which is the ESDMA stuff. This is now included in NWM7.3. If you run still NWM7.1 you need to install that piece of connector as a separate add on.
    This is where i got confused and was searching for NWM7.3.
    Thanks
    phanidps

  • SAP NetWeaver Mobile 7.1- Distribution Rule

    Hi,
    I have work order header and work order operations nodes(item) in an SWCV.My requirment is to have operations whose work center is say "ABC" alone.
    I have created a distribution model for this Work Order  data object.Created a Distribution rule also with a device attribute WORKCNETER of operation node.
    While creating device in Mobile administrator , i give the device attribute for WORK CENTER = ABC
    But the device extracts data for items which does not have workcenter ABC.
    Solutions?
    Thanks and Regards,
    Muralikrishna T.

    Hi,
    SAP Netweaver mobile 7.1 is using the same DVDs as SAP Netweaver PI 7.1. Only difference is that you choose the option for Mobile System when starting the installation in SAPinst.
    Everything is included in the installation and no separate installation is required.
    Regards,
    Shitij

  • SAP Netweaver Mobile 7.1 - Mobile Infrastructure 2.5

    Hi Everyone,
    Im kinda confused, is NW Mobile 7.1 the next version of MI 2.5? or it's all separate? What do they have in common?
    Thnx a lot.

    Hi
       NetWeaver Mobile 7.1 is infact the successor to MI 2.5 and MI 7.0 or in other words the next major release after MI 2.5 (MI 2.5 and MI 7.0 have the same architecture).  7.1 has been completely re-architected and has various improvements in terms of Scalability, Device Management, Data Volume and so on.  At the same time there is a compatibility layer in 7.1 which would enable applications currently running on MI2.5 and MI 7.0 to also run on 7.1.  For more information please refer to this <a href="http://help.sap.com/saphelp_nwmobile71/helpdata/en/e1/8e51341a06084de10000009b38f83b/frameset.htm">link</a> and other documents present under
    http://service.sap.com/instguides and then navigate to
    -> SAP NetWeaver
    -> SAP NetWeaver Mobile 7.1
    -> Installation
    Hope this helps
    Best Regards
    Sivakumar
    Message was edited by:
            Sivakumar V

  • Data Volume handling in SAP Netweaver Mobile 7.1

    Hi,
    I wanted to know what is the kind of data volume a device which has netweaver mobile can handle. Assuming we have Intermec cn 50 device what could be threshold value for the data that the device hold after it has consumed memory for the Mobile Client to work.
    I know this is a very abstract or not a to the point question but this is something what Stakeholders expect when they are plannign to mobilize any of the business processes.
    Thanks.
    Srikumar V

    Hi Ankur,
    you can also directly navigate to the mobile administrator using the web browser. The url is as follows:
    http://host:port/sap/bc/webdynpro/sap/sdoe_administration?sap-language=EN
    Host and port you have to adjust to your settings. These are the same settings you are using during synchronization on a client device.
    Regards,
    Stefan

  • Error 7 (windows error 126). Have tried to re-install itunes but failed, twice. some end message about "mobile device not supported".

    Error 7 (Windows error 126). I have tried to re-install itunes twice now, and each time  " mobile device not supported" appears and the  installation can not finish.

    See Troubleshooting issues with iTunes for Windows updates.
    Do you have any iOS devices? If the link above doesn't completely fix your library I could talk you through installing iTunes without Apple Moble Device Support for now which would at least enable you to open iTunes.
    tt2

  • SAP NetWeaver AS ABAP 7.1 for Mobile 7.1 Trial Version

    From where can I get the SAP NetWeaver AS ABAP 7.1 which is required to run data synchronization with
    NetWeaver Mobile 7.1 ?
    As per the download notes, for mobile 7.1 -
    "Note: SAP NetWeaver AS ABAP 7.1 is NOT part of the download package, but is integral part of the product shipment SAP NetWeaver Mobile 7.1. In order to synchronize applications that you have developed with SAP NetWeaver Mobile 7.1 Trial Version, you absolutely need to install SAP NetWeaver AS ABAP 7.1 also. Without such installation, applications you have developed with the Trial Version will only be able to run standalone on NW Mobile Client, but without data synchronization.
    Does the CE version contain AS ABAP 7.1? Link to the specific download pl.

    Hi,
    There's no SAP NetWeaver AS ABAP 7.1 trial version available on SDN. The CE trial version only contains the Java AS.

  • How to register a Mobile device Id in the netweaver Administer login?

    Hello all,
                 How to register a Mobile device Id in the netweaver Administer login?
    I logged in as J2ee_admin and I see SAP Mobile Infrastructure under the Administration adn underneath I see Mobile device releated configurations But there I don't see any options for creating a entry for registering a mobile device.
    How can we register a mobile device/laptop there???
    Thanks for your help in advance.
    Thanks,
    Greetson

    Hi Greetson,
    well, if you open the NWA and select
    "Mobile Infrastructure->Device Maintenance", search for all devices.
    Select the deviceId you are interested in, then in the bottom part of the screen you will find some informations of the device. Open the second tab ("Mobile Components"). You should see "MobileEngine JSP" there as entry. Correct so far?
    Then there is a button "Add/Remove"
    If you select that button a new window opens. In there you can select the component you want to install on the device. Please enter the username as well - this is mandatory for the assignment. Well, then press add and the entry occures in the list at the bottom of the screen.
    Next Sync - app comes down to the device.
    Oh - before this can happen, you have to deploy the SDA file on the J2EE - but this is a logical step I guess.
    Hope this helps to solve the issue
    Regards,
    Oliver

  • MAM development on SAP NetWeaver Mobile 7.1?

    Hello world
    I did notice that SAP has released SAP NetWeaver Mobile 7.1. I was of course very curious if this would (finally) make MAM25 developments possible in the new SAP NetWeaver (Mobile ) Developer Studio 7.1, because the old SAP NetWeaver Developer Studio 7.0 is based on Eclipse 2.X while the new one is based on Eclipse 3.3 (which has some advantages compared to Eclipse 2.X).
    So I did download SAP NetWeaver Developer Studio 7.1 and SAP NetWeaver Mobile 7.1, and installed both of them on my system. I was positively surprised when I noticed a Mobile Infrastructure perspective. So I did download our customized MAM25 source code from the CVS server and I tried to let it compile and run on SAP NetWeaver Mobile Developer Studio 7.1.
    Compiling was not a problem: after including some required JAR files, the code did compile successfully, however when trying to export the project, it seemed that the JSP files were not compiled, however I did put the tick mark at the Add JSP as compiled classes option. In my NetWeaver Developer, a folder $jsp was created, but with nothing inside. And in the generated WAR-file, I couldn't find any compiled JSP file as well...
    In the 7.0 version, a file called mam25.jar was created and putted into the lib folder in the war archive file, which contained all the class files. This file was not created with version 7.1.
    When trying to run the MAM from within NetWeaver Mobile Developer Studio 7.1, I did get the following exception when launching:
    java.lang.NoClassDefFoundError: com/sap/tc/mobile/cfs/startup/Startup
    Caused by: java.lang.ClassNotFoundException: com.sap.tc.mobile.cfs.startup.Startup
    Is there anyone who can tell me whether or not SAP NetWeaver Mobile Developer studio 7.1 is able to compile, generate and run the MAM25 source? If not, why is there a perspective Mobile Infrastructure included?
    If it is compatible, does anyone have an idea why it didn't work with me?
    Thanks for your help!
    Best regards,
    Diederik

    Hi all,
    First of all, thanks for all the information!
    I think there is a little misunderstanding, or maybe I am wrong
    SAP NetWeaver is the web-application you can use to analyze, administrate, etc... your mobile applications?
    I am actually talking about the SAP NetWeaver Developer Studio 7.1, which is in fact just an extended Eclipse environment. There is some kind of mobile update pack which you can find here: [SAP NetWeaver Mobile 7.1 SP3|https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/c0846cb5-59ec-2a10-46a2-cff9cd9b8fc3]
    My question was if you can maintain and develop in JAVA your MAM25 application with this version of the Netweaver Developer Studio? I did notice a perspective Mobile Infrastructure as in version 7.0, and I can compile the JAVA code, but I can't run the application (see error in original posting) and it seems that no JAVA files are generated from the JSP files.
    I guess it is just a matter of making the plugins compatible for Eclipse 3.X, because the plugin system of Eclipse 2.X is not compatible with the plugin system of Eclipse 3.X. But because of the Mobile Infrastructure perspective that I did notice, I was thinking that this was done. But this seems not to be the case, or I did do something wrong...
    So the only question is: can I use SAP NetWeaver Developer Studio 7.1 (aka Eclipse 3.X) to develop in JAVA the MAM25 application?
    Thanks for the help!
    Best regards,
    Diederik

Maybe you are looking for