Mobile displays no service

mobile displays no service

Hi and welcome to the forums boomer!
A couple of places for you to visit:    Blackberry 101    Tips & Tricks
See this knowledge base article:    "No Signal" status
Happy to have you here!
IrwinII
Please remember to "Accept as Solution" the post which solved your thread. If I or someone else have helped you, please tell us you "Like" what we had to say at the bottom right of the post.

Similar Messages

  • Have upgraded to Iphone 4s, have inserted the microsim but mobile constantly displaying no service. Do I need to do anything to activate the sim? Thanks in advance.

    Have upgraded to Iphone 4s, have inserted the microsim but mobile constantly displaying no service. Do I need to do anything to activate the sim? Thanks in advance.

    Haven't connected to itunes as of yet, just followed the set up on the phone.  Is this the problem?

  • Looking for help - Company is going to Mobile Asset Management service that does not support BB - especially BB 10.

    Hello,
    I am looking for ideas/help. I currently have a BB Z10 (10.1.0.2039) with Verizon Wireless.  The company has a BB Enterprise Server for older devices (I previously was on that).  I bought a Z10 several months ago and have been connecting to the corporate network through Lotus Traveler. They do not have and will not implement a BB 10 Enterprise Server. Some in IT informed that if the company used the BB software they could manage all devices..... not accepted.
    All my contacts, calendar, and company email is funneled to the BB Hub.....
    So my company is implementing a Mobile Asset Management Service that I have to sign up for (Airwatch?).  They only support Android and IPhone.
    Will future versions of the BB OS support Android Apps.... Soon (I have less than 2 weeks)
    I have read where it is possible to put the device in development mode to run Android Apps.  I don't know if that will work with this and have no idea how stable the phone is in that mode. I travel internationally so I don't know how a development mode would work overseas. Any thoughts?
    I like my Z10 but will need to switch to keep functionality if I can't find a work around 
    Any assistance ????
    Thanks for any help.

    Hi and Welcome to the Community!
    BB10 devices have the ability to run .apk apps via special methods. Development Mode is used only for installing the app...not for normal operation. So you install (side-load) the app in Development Mode, then go back to normal mode for normal operations.
    If a .bar file for the .apk app already exists somewhere, you can side load it to the BB10 device and see if it works or not. If there is not yet any .bar file, there is an app called SideSwype that can convert many .apk apps to .bar and install it to your device.
    Good luck!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Cannot enable "Apple Mobile Device" in Services for Windows 7 64-bit. Please Help!

    Hi,
    First post here, but I've been trying to figure out a solution towards iTunes opening my iPhone 4 so I can sync it. But every time I sync it, it gives me a message saying "This iPhone cannot be used because the Apple Mobile Device service is not started".
    To try and resolve this, I tried the enabling "Apple Mobile Device" in services method, but when I try to start the service again, I get yet another message from Windows saying "The Apple Mobile Device service on Local Computer started and then stopped. Some services stop automatically if they are not in use by other services or programs".
    At a first glance, I thought I needed iTunes to be running my iPhone whilst I try to turn the service on, but all I get is the same message saying "The Apple Mobile Device service on Local Computer......", either if the device is connected and attempting to run or not.
    This problem appeared out of nowhere when I plugged it in, just to sync some songs and pictures to it. So I don't know what's causing this issue!
    And yes, I uninstalled iTunes 10.4.1 and Apple Mobile Device and then reinstalled them. But the issue still continued. Grrr......
    It has lasted a stressful 3 days now and if anyone knows a solution or can find one, please let me know as soon as possible.
    Many thanks,
    Martin.

    bfin wrote:
    When I try to get the one off the website it downloads the 1020 printer driver and it will not work for me. I need this for school asap so please help
    Hi,
    Please try this, this is for 1022
      http://h20000.www2.hp.com/bizsupport/TechSupport/S​oftwareIndex.jsp?lang=en&cc=uk&prodNameId=439431&p​...
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Can anyone tell me how to fix this error I am receiving: LabView: File not found. VI "Mobile Display.vi" was stopped at unknown " " at a call to "Mobile Display.vi"?

    Can someone help me please? I am receiving this error everytime I attempt to execute my application:
    LabView: File not found. The file might have been moved or deleted, or the file path might be incorrectly formated for the operating system. For example, use \ as path separators on Windows, : on Mac OS, and / on Linux. Verify that the path is correct using the command prompt or file explorer.
    VI "Mobile Display.vi" was stopped at unknown " " at a call to "Mobile Display.vi"
    Attachments:
    labview error.jpg ‏176 KB

    We cannot help without additional information:
    Are you running your code
    ...in the development system?
    ...as a standalone application?
    ...deployed to an embedded target?
    If it is a built application, do you explicitly include dynamically called VIs in the build specification?
    Who wrote the program? Do you have access to the code?
    How is this VI called? Is there sufficient error handling?
    Do you manipulate paths as strings or as proper path datatypes with the strip path/build path primitives etc.?
    Is it running on the same OS used to develop it ...
    LabVIEW Champion . Do more with less code and in less time .

  • Displaying Web Service Results in a Report

    have a web service registered with APEX (GET_DAY_OF_THE_WEEK).
    It tests fine from the Web Service References Panel.
    I am trying to follow the steps in the Oracle Database Application Express
    User's Guide [Release 2.2 Part Number B28550-01] under the Displaying Web
    Service Results in a Report topic.
    When I get to step 6 = "For Result Tree to Report On, select the portion of the
    resulting XML document that contains the information you want to include in the
    report." ... THERE IS NO PLACE TO -->"...select the portion of the resulting
    XML document that contains the information you want to include in the report".
    Is this a bug? Is there a workaround?
    Steve

    Hi,
    I'm having a similar problem - I have a work_date column and I want to use a date picker to select tasks performed between 2 dates.
    For example, on Page 3 I have a username,client_name and task fields. I have 2 date pickers, one for start date and one for end date, and a submit button.
    I want to be able to select '01-AUG-10' from the start_date, then '31-AUG-10' from the end_date, then redirect to a page (Page 41) when I click the button to run this:
    select username,client_name,task,work_date
    from replicon where
    username = :P3_USERNAME and
    work_date between to_date(:P3_START_DATE,'DD-MON-RR') and
    to_date(:P3_END_DATE,'DD-MON-RR')
    order by work_date
    but I'm getting this error:
    ORA-01858: a non-numeric character was found where a numeric was expected
    The date format is "DD-MON-RR', and the work_date column is a "DATE" data type.
    The button items are "P3_USERNAME","P3_START_DATE" and "P3_END_DATE" with the same values (&P3_USERNAME etc), and the button redirects to page 41.
    I can't see how I can pass the username, start_date and end_date from Page 3 to Page 41. Am I using the correct ITEMS, or is it the query?
    Help appreciated.

  • My iPhone 3GS is displaying 'No Service'

    My phone is fully update and on the 3 network. My phone has been displaying no service for the past 24 hours, occasionally searching. I have tried resetting the network settings with no avail.
    If I manually search for networks I can find the 3 network and can select it but it still displays 'no service'. I have tested it by making calls to check its not connected but not displaying correctly.

    So if you are experiencing a no service. there are a few things you can try.
    Power cycle- power off and back on - test.
    Hard reset -hold home and power button until apple logo appears- release - wait until phone restarts -check
    Reseat the sim card - test.
    Reset network settings-  Settings>general>reset >reset network settings - wait for reboot -test.
    Reset all settings>settings>General>reset>reset all settings.
    Restore the phone following- http://support.apple.com/kb/HT1414

  • IPhone constantly displaying "no service" although good serivice is available

    iPhone is displaying "No Service" constantly although in an area of good service so I am unable to call or text.
    How do I get the phone to recognise service again so the phone can be used?

    Hi, thank you.  This still has made no improvement so will be contacting my service provider tomorrow.
    Thanks.

  • HT4061 hi i have purchased iphone4 from vodafone australia 2 years back.it is unlocked, when i went to india .it was not working with any carrier in india.it was displaying no service.is it a problem of iphone or any other anybody please could let me know

    hi i have purchased iphone4 from vodafone australia 2 years back.it is unlocked, when i went to india .it was not working with any carrier in india.it was displaying no service.is it a problem of iphone or any other anybody please could let me know?

    Hi ashish,
    Did you contact TPG about activating International Roaming before you left for India:
    http://www.tpg.com.au/support/international_roaming.php
    Cheers,
    GB

  • [SOLVED] systemd display-manager.service problem

    Hi!
    After the upgrade of systemd, i noticed today this error in dmesg:
    systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory. See system logs and 'systemctl status display-manager.service' for details.
    systemctl status display-manager.service
    display-manager.service
    Loaded: error (Reason: No such file or directory)
    Active: inactive (dead)
    The strange thing is why systemd tries to load a service that doesn't exist! And what is this unit for? I'm using slim to load my xfce desktop, and everything works well...
    Any idea?
    Thanks!
    EDIT: Uhm, may be the alias in slim.service, set to display-manager.service, is the problem? Or may be this is not a problem, but it is its normal behaviour , and i misunderstood something! Is it?
    Last edited by nierro (2012-07-15 17:13:42)

    nierro wrote:
    Hi!
    After the upgrade of systemd, i noticed today this error in dmesg:
    systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory. See system logs and 'systemctl status display-manager.service' for details.
    systemctl status display-manager.service
    display-manager.service
    Loaded: error (Reason: No such file or directory)
    Active: inactive (dead)
    The strange thing is why systemd tries to load a service that doesn't exist! And what is this unit for? I'm using slim to load my xfce desktop, and everything works well...
    Any idea?
    Thanks!
    EDIT: Uhm, may be the alias in slim.service, set to display-manager.service, is the problem? Or may be this is not a problem, but it is its normal behaviour , and i misunderstood something! Is it?
    There has been a change regarding display managers. up until now they were WantedBy graphical.target, which was kind of stupid because this allowed you to enable multiple display managers.
    Instead graphical.target now Wants display-manager.service and all display managers are supposed to install the appropriate Alias. Afaik all display manager service files have been updated ragarding this and a "systemctl reenable slim.service" should fix it.

  • I have bought my iphone 5 from UK and now residing in USA. Although my carrier (Ultra Mobile) provides 4G service i only get 3G speed. Also icon "3G" appears on top part of my screen. My model is MD297B/A. Pls suggest to enable 4G on my phone

    i have bought my iphone 5 from UK and now residing in USA. Although my carrier (Ultra Mobile) provides 4G service i only get 3G speed. Also icon "3G" appears on top part of my screen. My model is MD297B/A. Pls suggest to enable 4G on my phone

    It is more than likely the inability of the UK phone to support the US phone bands. You will probably be stuck with 3G and will never be able to get LTE. Also, your warranty is only good in the UK. You might be better of to try and sell that device to someone in the UK and purchase a phone in the US that you can get full service with.

  • I recently bought an iPhone 5s from boost mobile I thought service would be decent but it really *****. I'm wondering if there is any way I can switch carriers maybe to us cellular seeing that they recently added new prepaid plans

    I recently bought an iPhone 5s from boost mobile I thought service would be decent but it really *****. I'm wondering if there is any way I can switch carriers maybe to us cellular seeing that they recently added new prepaid plans and have good service in my area.  I do know boost operates with sprint but  not sure what I can do because having an expensive phone with crappy service really *****

    Sorry, but Boost reportedly does not offer unlocking for iPhones, so you're stuck with them unless you can return the iPhone for a refund and cancel the service, or can sell the iPhone to someone who could use it with Boost.
    Regards.

  • Display pm service order on application area CIC0

    Hi Experts,
    We have a requirement that the pm orders created for a business partner can be displayed on CIC0 on the navigation area. (Actually only display Costumer Service Orders) . What can we do?
    Thanks in Advance
    Nicolas

    Hi Abdul,
      For this case, It will required some coding. You need to create an subtype for object ISUSMORDER. For exmaple ZISUSMORDE. And add new attribute 'person responsible' to the subtype, create a code to get person responsible into that attribute, and delegate the object to the subtype. then it will show up on transaction ENVD for you to select.
    Chaiphon

  • BB 9330 - turning off mobile network data services causes BIS WiFi connection to change to not connected

    re: v. 6.0.0.719 bundle 3084 platform 4.4.0.560 update
    1. History.
    a. Received BlackBerry Curve 9330 out of the box with bundle 2333 installed (but missing Verizon Visual Mail Message app.) Installed BB Desktop Software on laptop, connected smartphone to PC, Attempted to install bundle 3084, but initialization apparently failed, phone still showing bundle 2333 installed and no VVM app. Browser app unable to connect to network. On second try was able to complete 3084 install. Still no VVM app. Now some times the browser connects, sometimes it does not. Browser not connecting appears to be BB software bug. VVM issue appears to be one for the service provider.
    b. Data service is currently Verizon BlackBerry Social Messaging Data Package which is suppose to have BlackBerry Internet Services via WiFi per Verizon FAQ doc.
    2. Problem. With an active WiFi connection the Browser app is not connecting via WiFi giving a error message that WiFi service is required.
    Investigation found if mobile network data service was turn off in Mobile Network Options, the BlackBerry Internet Services connection status was changed from connected to "WiFi" to "not connected". Browser appears to work ok when mobile network data service is turned on. BIS connection to WiFi comes back on. Not sure at this point if web data is going via mobile network or WiFi.
    I am wondering if other BB 9330 Verizon users are seeing the same symptoms.
    Bill
    P.S. I could not find where to report this apparent software bug. So I hope is the right place.

    If you have your Mobile Network as well as Wi-Fi turned on, your phone will default to the Wi-Fi for browsing (assuming you have a strong Wi-Fi signal).  Leaving both on will allow you to browse as well as receive calls and texts.
    I hope that helps you. 
    - If my response has helped you, please click "Options" beside my post and mark it as solved. Clicking the "thumbs up" icon near the bottom of my response would also be appreciated.

  • Since i have upgraded my i phone5 to 7.0.3 it has problem with 3g it display the service message every time, it reduce the battery life also.

    since i have upgraded my i phone5 to 7.0.3 it has problem with 3g it display the service message every time, it reduce the battery life also.

    Try using Settings > General > Reset > Reset All Settings.

Maybe you are looking for