Mobile DSD data download issue : "/DSD/ME_DDR_STAT" status on error

Hello All,
DSD Backend scenarios are working fine. We had sent all the master data and shipment IDOC's to the DSD connector and we see the data in the DSD connector tables. In the Mobile DSD application we are having problems in getting the data downloaded to the Nobile client. we noticed that afer the shipment creation in backend the status on the table "/DSD/ME_DDR_STAT" goes to the following status:
DATA_STATUS - N
TRANDAT_STATUS - S
PRCDAT_STATUS - N
and when we try to do a sync from the mobile device it says the
synchronization is completed successfully but the status on the table
changes to Error as mentioned below:
DATA_STATUS - E
TRANDAT_STATUS - S
PRCDAT_STATUS - E
We are not sure what is the issue. We had successfully implemented the
Pricing BADI and also did all the configuration that are related to the
DSD Pricing .
We had implemented the OSS note "1287227 - Price date status E
in /DSD/ME_DDR_STAT set incorrectly". Still the issue exists.
Any suggestions why the status is changing to Error and Master data is
not getting downloaded in to the MI Client.
We are at SP13 and I am using MI client for SP13 with path level 1 for SP 13.
Thanks for your help in advance.
Thanks,
Greetson

Dear Greetson,
This generolly happens if there is some problem in the Pricing Data.
Please disable all the Sync Bo releated to pricing and again create a tour .....
check whether u are getting the required result.
Also check TRX: SLG1
I will try to update the thread if i could find something more useful for you.
Regards,
Akhil...
Edited by: Akhil Rastogi on Jan 30, 2009 10:31 PM

Similar Messages

Mobile DSD Help : "/DSD/ME_DDR_STAT" status on error

Hello All,
DSD Backend scenarios are working fine. We had sent all the master data and shipment IDOC's to the DSD connector and we see the data in the DSD connector tables. In the Mobile DSD application we are having problems in getting the data downloaded to the Nobile client. we noticed that afer the shipment creation in backend the status on the table "/DSD/ME_DDR_STAT" goes to the following status:
DATA_STATUS - N
TRANDAT_STATUS - S
PRCDAT_STATUS - N
and when we try to do a sync from the mobile device it says the
synchronization is completed successfully but the status on the table
changes to Error as mentioned below:
DATA_STATUS - E
TRANDAT_STATUS - S
PRCDAT_STATUS - E
We are not sure what is the issue. We had successfully implemented the
Pricing BADI and also did all the configuration that are related to the
DSD Pricing .
We had implemented the OSS note "1287227 - Price date status E
in /DSD/ME_DDR_STAT set incorrectly". Still the issue exists.
Any suggestions why the status is changing to Error and Master data is
not getting downloaded in to the MI Client.
We are at SP13 and I am using MI client for SP13 with path level 1 for SP 13.
Thanks for your help in advance.
Thanks,
Greetson

Dear ,
Could you please tell - how did u solve this problem?
I am also facing the same problem.. could you please help.
I am getting the status as E - S - E; which prevets the data to be downloaded to middleware then to PDA.
What coudl be the reason for this wrong status?
thank you
VEnkatesh
Edited by: venkatesh paulraj on Aug 2, 2010 12:02 PM

OBIEE 11g Data Download issue

Hi,
One of our user is not able to download data in any format in production in his PC - OBIEE 11.1.1.7.0
When export link is clicked, a pop us comes up saying that "Do you want to save saw.dll? from analytics.xxx.com"
I am not able to save the file and IE hangs.
The user is using IE9.

Hi.
This seems to be a problem related to IE9.
Check this.
2. OBIEE does not support the use of IE9's Document Mode and Browser Mode settings to emulate versions of Internet Explorer other than the installed version.
More info about certification you will find at the following documentation.
Oracle Business Intelligence Suite Enterprise Edition 11g Release 1 (11.1.1.x) Certification Matrix
http://www.oracle.com/technetwork/middleware/bi-enterprise-edition/bi-11gr1certmatrix-166168.html
Cheers.

Supplier Data Download

Hi All,
I am facing a strange issue. I have forecast in D1 and D2 in Demantra DM. This published to ASCP.
ASCP runs with D1,D2 and M1 organization where M1 is central purchasing. All the demand from D1 and D2 is fulfilled in M1.
Dependent demand from M1 is fulfilled with Purchase Orders to Suppliers.
When I download this data to Demantra RTSOP, I am getting all null records for D1 and D2.
There is not data for M1.
Request your help in investigating this. Is this expected behavior or there is some issue in data download?

Hi,
There would be some issue in the data download. Check workflow status and perform proper analysis.
Regards,
Saidaiah

Droid DNA Mobile Data Connectivity Issues

   I have the HTC Droid DNA, about 6 weeks old, and for some reason my phone has randomly started to lose connection to mobile data. I've never dropped it or spilled anything on it, so I don't understand why this is happening. I've tried turning my phone off and on again, changing the preffered network to global and back to LTE, and removing and re-inserting the SIM card..but it still randomly happens. My phone can be fine for a week and then it will randomly just disconnect from mobile data again.
   My first question is why do I pay for this when I have to sometimes wait for more than an hour for mobile data to come back? My second question is does anybody else with the DNA get this problem? I realize that when you have Wi Fi activated it would automatically disconnect you; however, this isn't related to my issue. I've turned Wi Fi off and that's when I get the mobile data disconnected issue. This HAS to be corrected. I'm not paying over $100 a month for data when I can't even use it when I need to.

>> Duplicate post removed for cross-posting violations of the Verizon Wireless Terms of Service
     See Droid DNA Problem, No SIM card error for original message <<
Message was edited by: Verizon Moderator

BB 9330 - turning off mobile network data services causes BIS WiFi connection to change to not connected

re: v. 6.0.0.719 bundle 3084 platform 4.4.0.560 update
1. History.
a. Received BlackBerry Curve 9330 out of the box with bundle 2333 installed (but missing Verizon Visual Mail Message app.) Installed BB Desktop Software on laptop, connected smartphone to PC, Attempted to install bundle 3084, but initialization apparently failed, phone still showing bundle 2333 installed and no VVM app. Browser app unable to connect to network. On second try was able to complete 3084 install. Still no VVM app. Now some times the browser connects, sometimes it does not. Browser not connecting appears to be BB software bug. VVM issue appears to be one for the service provider.
b. Data service is currently Verizon BlackBerry Social Messaging Data Package which is suppose to have BlackBerry Internet Services via WiFi per Verizon FAQ doc.
2. Problem. With an active WiFi connection the Browser app is not connecting via WiFi giving a error message that WiFi service is required.
Investigation found if mobile network data service was turn off in Mobile Network Options, the BlackBerry Internet Services connection status was changed from connected to "WiFi" to "not connected". Browser appears to work ok when mobile network data service is turned on. BIS connection to WiFi comes back on. Not sure at this point if web data is going via mobile network or WiFi.
I am wondering if other BB 9330 Verizon users are seeing the same symptoms.
Bill
P.S. I could not find where to report this apparent software bug. So I hope is the right place.

If you have your Mobile Network as well as Wi-Fi turned on, your phone will default to the Wi-Fi for browsing (assuming you have a strong Wi-Fi signal). Leaving both on will allow you to browse as well as receive calls and texts.
I hope that helps you.
- If my response has helped you, please click "Options" beside my post and mark it as solved. Clicking the "thumbs up" icon near the bottom of my response would also be appreciated.

SAP BusinessObject Mobile WebI Report Prompt Issue

Hi,
I have problem to view the Prompt value in Long Text for WebI report in my iPad. The SAP BusinessObject Mobile application is on version 5.1.12.
We are using BI Platform 4.1, and the WebI report is connected to Bex Query using BICS connection.
Below are the settings that I had done:
Setting of Characteristic in BW:
Setting of Characteristic – ZBPARTNER in BEx Query Designer:
Below are the report Prompt result in BI LaunchPad and BI Mobile:
Example data:
Business Partner ID 123 has description in Long Text (DO NOT USE - KOC ALLIANZ SIGORTA A.S) and Short Text (DO NOT USE - KOC).
Business Partner (on top of ZBPARTNER) in WebI is showing Long Text as expected.
For example, you can see the long text "DO NOT USE - KOC ALLIANZ SIGORTA A.S".
Business Partner (on top of ZBPARTNER) in Mobile Apps is showing Short Text:
For example, you can see the long text "DO NOT USE - KOC".
I need the Prompt value is the BusinessObject Mobile to be display with Long Text, but I cannot find any configuration to achieve this.
Is anyone encounter similar issue and can provide me some suggestion?
Thank you in advance.
Regards,
Edison Wang

Hi,
Just like to follow up whether is there anyone encounter similar issue like above which can give me some advise?
Thank you.
Regards,
Edison Wang

Date on the basis of status

hello experts,
I have an issue related to the Report designing.
I have some fields to display into the report like Completion date, Status Value.
Now I want to display only those date where status is completed, how can i achieve this as i have some more fields so i cant restrict the Status field globally in the report.
i also tried to create the Formula var for both compl dt & status & used the If condition but the formula gives some junk val.
please advice the soln
thanks in advance
neha

thanks for the response..
i had created the condition on the basis of status = completed, but it hides all other records having other status.
actually , the completion date is basically the creation date
suppose...
on 20.04.2011 the status was open then creation date was 20.04.2011 and then on 25.04.2011 status is changed to completed.
but on the same date there is a record having status released.
I want the data like this
Object id     Status           date                  value
aa11            compl           25.04.2011           27
a15d             released                                  36

4G LTE data reception issue in area of work building

Hi, I'm having a data reception issue in a certain area at work. The signal indicator at the upper right of the homescreen shows "4GLTE" but this is clearly inaccurate since I am not able to navigate to websites or send/receive multimedia messages. If I move ~30 feet east in the building, the reception is restored. Two people with iPhone 5 devices have the same issue. However, the Verizon iPhone 5 allows you to turn off LTE. Once this was done and the signal fell back to 3G, reception was restored, albeit with slower speeds, but at least reception wasn't completely blocked. I understand 4G is not available in all areas, but in this case, the phone is not automatically switching to 3G and there is no workaround because there is no option to turn off LTE on the Z10. In the "Settings" -> "Network Connections" -> "Mobile Network" -> "Network Technology" dropdown, the only values are:
UMTS/GSM (when I switch to this, no networks are found)
Global (the current selection)
LTE/CDMA
This is a big problem for me because for 8+ hours in the day I can't receive MMS messages or navigate to websites.

Hi, Nate650,
Sorry to hear about your problem with 4G. First, let me ask, have you updated your Z10 to the latest official software version? I had a similar problem with my Z10. After about an hour on the phone with CS, we figured out it was a problem with the tower near me. The problem was fixed by VZW and I have not had connection issues. You are right, though, about the Z10 falling back to 3G. Mine did before the update but not since.
Doc

Logical Standby Data Consistency issues

Hi all,
We have been running a logical standby instance for about three weeks now. Both our primary and logical are 11g (11.1.0.7) databases running on Sun Solaris.
We have off-loaded our Discoverer reporting to the logical standby.
About three days ago, we started getting the following error message (initially for three tables, but from this morning on a whole lot more)
ORA-26787: The row with key (<coulmn>) = (<value>) does not exist in table <schema>.<table>
This error implies that we have data consistency issues between our primary and logical standby databases, but we find that hard to believe
because the "data guard" status is set to "standby", implying that schemas' being replicated by data guard are not available for user modification.
any assistance in this regard would be greatly appreciated.
thanks
Mel

It is a bug : Bug 10302680 . Apply the corresponding Patch 10302680 to your standby db.

Has anyone upgraded the Ironport ESA to 8.5.6-074 and had the issues of Raid status showing unknown?

Has anyone upgraded the Ironport ESA to 8.5.6-074 and had the issues of Raid status showing unknown? After we upgraded our appliances we are having issues with our ESA appliances showing the RAID status as unknown. When we reported the issue to CISCO we were updated there were no issues reported at all. Could anyone please confirm if you have experienced the same issue.

You should see OPTIMAL - meaning the drives in the C170 are in good health/status:
myc680.local> version
Current Version
===============
UDI: C680 V FCH1611V0B2
Name: C680
Product: Cisco IronPort C680 Messaging Gateway(tm) Appliance
Model: C680
Version: 8.5.6-074
Build Date: 2014-07-21
Install Date: 2014-07-29 11:16:34
Serial #: xxx-yyy1611Vzzz
BIOS: C240M3.1.4.5.2.STBU
RAID: 3.220.75-2196, 5.38.00_4.12.05.00_0x05180000
RAID Status: Optimal
RAID Type: 10
BMC: 1.05
There are times post-reboot, that you'll see and get notification of RAID sub-optimal --- meaning that the appliance is running through on a health-check of the appliance's RAID. You should be getting a notification once RAID status has returned to OPTIMAL, or as per the older OS revisions, READY:
myc170.local> version
Current Version
===============
UDI: C170 V01 FCH1428V06A
Name: C170
Description: Cisco IronPort C170
Product: Cisco IronPort C170 Messaging Gateway(tm) Appliance
Model: C170
Version: 7.6.3-019
Build Date: 2013-06-09
Install Date: 2014-09-12 13:52:24
Serial #: xxxxxxD87B39-yyyyyy8V06A
BIOS: 9B1C115A
RAID: 02
RAID Status: READY
RAID Type: 1
BMC: 2.01

Trying to download I tunes and get this error message Service " Apple Mobile Device" ( Apples Mobile Device) failed to start. Verify that you have sufficent privileges to start system services

Trying to download I tunes and get this error message Service " Apple Mobile Device" ( Apples Mobile Device) failed to start. Verify that you have sufficent privileges to start system services

See Troubleshooting issues with iTunes for Windows updates.
tt2

PI 7.1 - SLD Data Supplier issues

I am getting an error while clicking on "Collect and send data' in the SLD Data Supplier service in the NWA. The error is as follows:
http://<hostname>:<java port>/sld/ds, Status: 403, Message: Forbidden
I looked at all the places that I could think of. Any suggestions?
SLDCHECK works fine.
All the SM59 destinations work fine.
All the destinations in NWA for the Data supplier (SLD_DATASUPPLIER and SLD_CLIENT) work fine.
I am able to do the development in ES Builder fine. But, when it comes to the adapters, I am unable to see any of my adapters as my cache refreshes are failing. I started debugging this issue and stumbled upon the error in the SLD data supplier.
Thanks
Sridhar

Hi,
Please apply note:
#999962 - PI 7.10: Change passwords of PI service users
Regards,
Caio Cagnani

When is the Next update of IOS..? ****** of with Data Loss issue

I am using Iphone 4 for past 2 years in India on Dococmo Network, since after the update of IOS 5 and 5.0.1 I
am FAcing the frequent Data loss in Mobile...!!
Time beign i can over come it by turing off the cellular connetion to on and off mode where it resetting the data connection...!!!

Since you haven't bothered to describe what this mysterious "data connection issue" is, we have no way to confirm or deny your statement that the problem is widespread.
The fact remains, you're using it on an unsupported carrier.
If you'd like to try and describe WHAT THE PROBLEM IS instead of getting defensive about it, we might be able to help. Otherwise, your initial question has been answered. No one here can tell you when the next update to iOS will be released.

Virtex6:Configuration data download to FPGA was not successful. DONE did not go high, please check your configuration setup and mode settings

Hello，everyone.
I am using virtex6 FPGA and trying to download mcs file to PROM and have failed.
I download .bit file to FPGA and succeed.
When i try to download .mcs file to PROM XCF128X-FTG64C(BPI Flash) and choose Slave SelectMAP Mode
and the process is about 68% it fails.
The message below the IMapct is as belows:
done.
PROGRESS_END - End Operation.
Elapsed time =      0 sec.
// *** BATCH CMD : identifyMPM
// *** BATCH CMD : assignFile -p 1 -file "C:/Users/Administrator/Desktop/TEST/LED/led.bit"
'1': Loading file 'C:/Users/Administrator/Desktop/TEST/LED/led.bit' ...
done.
INFO:iMPACT:2257 - Startup Clock has been changed to 'JtagClk' in the bitstream stored in memory,
but the original bitstream file remains unchanged.
UserID read from the bitstream file = 0xFFFFFFFF.
INFO:iMPACT:501 - '1': Added Device xc6vlx240t successfully.
INFO:iMPACT - Current time: 2014/3/13 8:48:14
// *** BATCH CMD : Program -p 1
PROGRESS_START - Starting Operation.
Maximum TCK operating frequency for this device chain: 66000000.
Validating chain...
Boundary-scan chain validated successfully.
INFO:iMPACT - 1: Over-temperature condition detected! [ 230.52C > 120.00C]
1: Device Temperature: Current Reading: 230.52 C, Max. Reading: 230.52 C
1: VCCINT Supply: Current Reading:   2.997 V, Max. Reading:   2.997 V
1: VCCAUX Supply: Current Reading:   2.997 V, Max. Reading:   2.997 V
'1': Programming device...
Match_cycle = NoWait.
Match cycle: NoWait
LCK_cycle = NoWait.
LCK cycle: NoWait
done.
INFO:iMPACT:2219 - Status register values:
INFO:iMPACT - 0011 1111 0111 1110 0100 1011 1100 0000
INFO:iMPACT:579 - '1': Completed downloading bit file to device.
INFO:iMPACT:188 - '1': Programming completed successfully.
Match_cycle = NoWait.
Match cycle: NoWait
LCK_cycle = NoWait.
LCK cycle: NoWait
INFO:iMPACT - '1': Checking done pin....done.
'1': Programmed successfully.
PROGRESS_END - End Operation.
Elapsed time =     23 sec.
Selected part: XCF128X
// *** BATCH CMD : attachflash -position 1 -bpi "XCF128X"
// *** BATCH CMD : assignfiletoattachedflash -position 1 -file "C:/Users/Administrator/Desktop/TEST/LED/leda.mcs"
INFO:iMPACT - Current time: 2014/3/13 8:49:32
// *** BATCH CMD : Program -p 1 -dataWidth 16 -rs1 NONE -rs0 NONE -bpionly -e -v -loadfpga
PROGRESS_START - Starting Operation.
Maximum TCK operating frequency for this device chain: 66000000.
Validating chain...
Boundary-scan chain validated successfully.
INFO:iMPACT - 1: Over-temperature condition detected! [ 230.52C > 120.00C]
1: Device Temperature: Current Reading: 230.52 C, Max. Reading: 230.52 C
1: VCCINT Supply: Current Reading:   2.997 V, Max. Reading:   2.997 V
1: VCCAUX Supply: Current Reading:   2.997 V, Max. Reading:   2.997 V
'1': BPI access core not detected. BPI access core will be downloaded to the device to enable operations.
INFO:iMPACT - Downloading core file D:/Xilinx/14.3/ISE_DS/ISE/virtex6/data/xc6vlx240t_jbpi.cor.
'1': Downloading core...
Match_cycle = NoWait.
Match cycle: NoWait
LCK_cycle = NoWait.
LCK cycle: NoWait
done.
INFO:iMPACT:2219 - Status register values:
INFO:iMPACT - 0011 1111 0111 1110 0100 1011 1100 0000
INFO:iMPACT:2492 - '1': Completed downloading core to device.
Current cable speed is set to 6.000 Mhz.
Cable speed is default to 3Mhz or lower for BPI operations.
Current cable speed is set to 3.000 Mhz.
Setting Flash Control Pins ...
Setting Configuration Register ...
Populating BPI common flash interface ...
Common Flash Interface Information Query completed successfully.
INFO:iMPACT - Common Flash Interface Information from Device:
INFO:iMPACT - Verification string: 51 52 59
INFO:iMPACT - Manufacturer ID:        49
INFO:iMPACT - Vendor ID:             01
INFO:iMPACT - Device Code:           18
Setting Flash Control Pins ...
Using x16 mode ...
Setting Flash Control Pins ...
Setting Configuration Register ...
'1': Erasing device...
'1': Start address = 0x00000000, End address = 0x008CE03B.
done.
'1': Erasure completed successfully.
Setting Flash Control Pins ...
Using x16 mode ...
Setting Flash Control Pins ...
Setting Configuration Register ...
INFO:iMPACT - Using Word Programming.
'1': Programming Flash.
done.
Setting Flash Control Pins ...
'1': Flash Programming completed successfully.
Using x16 mode ...
Setting Flash Control Pins ...
Setting Configuration Register ...
'1': Reading device contents...
done.
'1': Verification completed.
Setting Flash Control Pins ...
Current cable speed is resumed to 6.000 Mhz.
'1': Configuration data download to FPGA was not successful. DONE did not go high, please check your configuration setup and mode settings.
`Elapsed time =    814 sec.
and i find many people have met the same thing. But they are spartan series FPGA and i try to low the Resistances of Mode pins,M0 M1 and M2, but the problem does not been solved.
I have read the status Registers and find there is an over-temperature state
and in Impact i could not readback the registers. It is strange.
I am anxious about this problem and have not solved it yet
What reasons may it be?
Hope for your answer, thank you

Hi~I want to know if you solve the configuration problem for virtex-6?
As I encounter the  same configuration problem, I want to consult  you with some question.
Can I have your email?
gszakacs wrote:
I have measured the VCCINT and find it is 1.0V, not 2.997V;
That is not at all surprising. I always assumed the problem is with reading the XADC (system monitor) block and not with the voltage or temperature.
my Reference board is ML605
That would have been nice to know at the beginning...
It seems that you have selected the correct mode, assuming your jumpers are set as required in the ML605 Hardware User's Guide. See table 1-27, table 1-33 and the note below it about switch S1.
I'm not that familiar with the details of this reference design, but it may be that the slave SelectMap circuitry requires a reset or power cycle to actually configure the FPGA. Have you tried power-cycling to see if the FPGA boots from the flash?
I'd also suggest that you select the V6 in the JTAG chain view, then go to the debug menu of Impact and select Read Device Status (this is from memory, but it's something like that). That will not only show the bits of the configuration status register, but also describe what each bit means. Among other things you can check the state of the FPGA's configuration logic and the Mode pins.

Mobile DSD data download issue : "/DSD/ME_DDR_STAT" status on error

Similar Messages

Maybe you are looking for