Mobile hanged during startup

Mobile hanged during starting the phone. The power button is not working and always showing "Setting language". Even the phone is not starting without charging the phone. What to do next????

Similar Messages

Sever hangs during startup with registration of some servlets

          Sever hangs during startup if some specific servlets are being registered.
          The same servlets go OK in windows environment.
          It's an AIX 4.3.3 with jdk 1.2.2 IBM build ca122-20001026.


I tried doing the verbose boot and a lot of codes started showing up. I don't really know how to read stuff like these but I've read 3 shutdown causes or something like that. And it disappeared to blue then grey screen then it asked for language selection, I clicked english, then it says, if you want to fix your disk click DISK UTILITIES in the Utilities options. I did and still, didn't see anything listed on the First Aid tab.
I'm just wondering, what will happen if I reinstall my OS? I'll lose all the saved files and datas right? Is it like restoring it to factory settings and will just bring my laptop back to normal? I don't have any back ups for my file, is there any way that I could get some even if I can't access my desktop?

IMAC freezing, hang during startup, loud noise coming out from the speaker

I am using the iMAC i3 Intel based which i bought it just a month ago
Last week it hang, freeze just like that without me launch any application just yet
I hold the ON button for a restart, and it freeze during the startup
One more thing, sometimes when it freeze, there's a noise coming out from the speaker ( just like there is no signal from the TV )
Already sent it to the Apple Service Center but they tell me it is free from any error, but by the time i bring it back home, not even 12 hours, it freeze again just like that with loud noises coming out from the speaker.
Btw did i mention, sometimes there's also a screen distortion
Please somebody help me

I've experienced similar symptoms to the original poster's description. I have an iMac 27" 2010 model. This may be related to the following:
I've looked on numerous forums regarding the freezing problem I was having. This problem would arise on a wide range of systems.
Symptoms included but were not all always present - usually when I am loading the system with games/heavy load processes:
- Full system freeze, screen still on.
- Loud cracking noise coming from speakers (relative to what volume was at when the freeze happened).
- Computer asleep but I cannot wake up unless hard reset with power button.
- My screen backlight was also damaged (permanently dimmed) near the left side, and progressively got worse over time. This was fixed (replaced LCD 27" display $600+ and covered by my creditcard extended warranty)
Basically, what I've come to realize which has not been well documented as far as I could find relating to this problem - is that the system is overheating and causing these freezing errors (and LCD damage in my case). Prologned occurances could result in different system part failures.
How do you fix the overheating problem? Give this a try, it's worked so far for me and I've actually been able to continue video/photo editing without having this annoying freeze.
Search for and download 'iStat Pro' (widget addon that lets you monitor your system temperatures... compare it before and after the fix)
Search for and download 'SMCFanControl (a great little app that allows you to change your system fan speeds) - I did not know this was possible, and have never heard the fans go this high when it was being run automatically by the system. The fan's are obviously louder when set to max, but is well worth the system cooling results.

Error Sql-developer EA3 hangs during startup

Sql-developer 4 EA3 simply hangs while starting up in "startup pop-window" during task "Restoring Windows".
I've even restartet my windows 7, the problem still exists.
Have to use an earlier version :-(
regards Karsten

Try finding the settings directory for 4EA3 in your application settings/roaming profiles directory and deleting it

HELP: Latest Security Update hangs during startup

I did two updates, the latest Security Updates for Tiger OSX on my G4, mirror door and also the latest iTunes. After all the downloads it asked me to reboot. Now I get the gray Apple with an endless spinning clock.
I did repair disk permissions via holding down "C" button and also did the fsck or whatever command in terminal mode. Still it hangs.
I'm desperate need of help here. I'm posting this on my iPhone, as my only computer now won't boot.
Can I go back to another version (Tiger only DVD) or how I run off the CD without asking for installation?
To make matters worse, my external HD took a dump and I lost all my iTunes library. All I wanted to do was update my iPhone to 3.0, and now Im just hosed.
Does anyone know if this update does this and what to do? Or am I just unlucky? weeping.....
please post solutions that I can easily access on my small iPhone screen. thanks.
-G4 single 1.25, Mirrored Door, 768MB RAM, 80Gb HD (8 GB free),

Hi applrob, and a warm welcome to the forums!
Does anyone know if this update does this and what to do? Or am I just unlucky?
99.9% of the time it means there was some pre-existinng corruption. I'll mention all the steps, but I thing the bolded end section is what we'll end up needing.
Could be many things, we should start with this...
"Try Disk Utility
1. Insert the Mac OS X Tiger Install disc that came with your computer, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu. (In Mac OS X 10.4 or later, you must select your language first.)
*Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
3. Click the First Aid tab.
4. Click the disclosure triangle to the left of the hard drive icon to display the names of your hard disk volumes and partitions.
5. Select your Mac OS X volume.
6. Click Repair. Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
The usual reason why updates fail or mess things up, is if Permissions are not fixed before & after every update, with a reboot... you may get a partial update when the installer finds it doesn't have Permissions to change one obscure little part of the OS, leaving you with a mix of OS versions.
Some people get away without Repairing Permissions for years, some for only days.
If Permissions are wrong before applying an update, you could get mixed OS versions, if Directory is the slightest messed up, who knows!
If many Permission are repaired, or any Directory errors are found, you may need to re-apply some the latest/biggest updates.
May even need to do an Archive and Install if you have room on the HD, but saves all your files and gives a new OS...
http://docs.info.apple.com/article.html?artnum=107120
I only use Software Update to see what is needed, then get them for real via...
http://www.apple.com/support/downloads/
That way I can wait a week or so, check the forums for potential problems, and get Permissions & such in order before installing.
*If all the above fails, then it appears to be time for a relatively painless Archive & Install, which gives you a new/old OS, but can preserve all your files, pics, music, settings, etc., as long as you have plenty of free disk space and no Disk corruption, and is relatively quick & painless...*
*http://docs.info.apple.com/article.html?artnum=107120*
*Just be sure to select Preserve Users & Settings.*

HELP, my mac just hangs during startup

I tried to turn my computer off and it froze, i shut it off by the power butten.... I went to turn it on and i hear the startup bong, then i see the gray screen with the apple on it, the the little circle thing just goes around and around, it never goes anyplace else. I tried putting my os disk in...same thing happens. I can't get anyplace...what can i do???
HELP PLEASE

OK...update took it to the service center...it was a software issue, everything on my time machine was AWESOME...so they reinstalled a fresh copy of leopard and sent me on my way...I came home and reinstalled everything on my time machine. WHEW - we are back up and running and everything came back.
I swear - that time machine just paid for itself and is not consider PRICELESS.. I think everyone should have one.
so I just wanted to post an update

Excel 2013 hangs during startup--Excel 2013 starts in safe mode.

All Com's disabled. Word, Powerpoint, and Publisher 2013 open normally.
Excel 2010 starts normally.

Hi,
Since you said that Excel 2013 can start normally in safe mode, then this issue seems to be caused by some add-in. Disable the add-ins to check the issue.
http://office.microsoft.com/en-us/excel-help/work-with-office-safe-modes-HP010354300.aspx
Jaynet Zhang
TechNet Community Support

Photoshop CC gives beach ball for a full minute during startup.

CC 2014 works fine on my iMac. However when trying to start key CC 2014 apps on my Macbook Pro Retina (current version of Mavericks), they hang during startup.
I uninstalled, ran CC cleaner tool, reinstalled, tried removing plugins, font files... I logged out of Creative Cloud and back in... I'm at wit's end, and have wasted way too much time trying to troubleshoot. Illustrator, InDesign load fine. Photoshop and Premiere Pro do not. Photoshop will eventually load, but after the interface shows up it will give me a beach ball for at least a minute or more.
I logged in as a Guest user and it started right up.
Has anyone else experienced this? Just wasted a night trying to get this too work.

I have the exact same issue... but haven't found a solution for it yet :-(

Macbook hangs during login - airport extreme issue?

My new macbook hangs during startup. I have an airport extreme 802.11n version base station. My macbook is configured to talk to this base station.
If I power down the airport extreme, login works just fine. If I power on the airport, login hangs.
Any suggestions on how to fix this?

Hi
It is connected through wireless. I have installed the 802.11n drivers on it as well, doesn't help.

Wl server hangs at startup

Hi:
I'm using WLServer 8.1sp2. It's been working fine up until a couple of hours ago
when it started to hang during startup. Not sure if it was caused by an improper
shutdown, but I have rebooted.
Basically, I'm not getting any info at all out of log files or the system.out.
It gets to one point, freezes and nothing else happens. Is there some sort of
verbose option I can set to perhaps get some debugging information. Basically
the server output stops at the line shown below:
[java] <Jan 16, 2004 3:54:52 PM MST> <Notice> <WebLogicServer> <BEA-000327> <Starting
WebLogic Admin Server "mcdataserver1" for domain "mcdata">
thanks for any help. Jon

If nothing has changed on the server in terms of config.xml changes then it sounds
to me like resources. Are running a single instance or many within your server/domain?
When a JVM starts up, it has certain heap sizes and port resources to grope. Perhaps
there is not enough memory for the heap?
"Jon" <[email protected]> wrote:
>
Hi:
I'm using WLServer 8.1sp2. It's been working fine up until a couple of
hours ago
when it started to hang during startup. Not sure if it was caused by
an improper
shutdown, but I have rebooted.
Basically, I'm not getting any info at all out of log files or the system.out.
It gets to one point, freezes and nothing else happens. Is there some
sort of
verbose option I can set to perhaps get some debugging information. Basically
the server output stops at the line shown below:
[java] <Jan 16, 2004 3:54:52 PM MST> <Notice> <WebLogicServer> <BEA-000327>
<Starting
WebLogic Admin Server "mcdataserver1" for domain "mcdata">
thanks for any help. Jon

Flash Builder 4.5.1 for Mac hanging/crashing during startup "Loading Workbench"

Hello,
I'm having ongoing trouble with Flash Builder 4.5.1 hanging/crashing during startup.
Sometimes the following Terminal command fixes the issue:
cd ~/Documents/Adobe\ Flash\ Builder\ 4.5/cascaded/308971/configuration/.settings
rm org.eclipse.ui.ide.prefs
However this isn't a silver bullet solution, and sometimes the only way is to uninstall and reinstall FB4.5.
But this is a major hassle, especially after 3 or 4 times!
I am running Mac OS X 10.7 and have updated to FB 4.5.1 Premium and also installed Subversion/Subclipse as well as the BlackBerry PlayBook SDK.
Problems seem to occur when working in SVN projects.
I have also noticed that the Delete and Arrow keys and Right Click fails to work sometimes also.
Is there a way to reset / clear FB 4.5 Prefs / Workbench?
Thanks,
David Douglas
Here is the console report below:
/Applications/Adobe/Adobe\ Flash\ Builder\ 4.5/Adobe\ Flash\ Builder\ 4.5.app/Contents/MacOS/Adobe\ Flash\ Builder\ 4.5 ; exit;
!SESSION 2011-09-13 15:07:58.914 -----------------------------------------------
eclipse.buildId=M20100909-0800
java.version=1.6.0_26
java.vendor=Apple Inc.
BootLoader constants: OS=macosx, ARCH=x86, WS=cocoa, NL=en_US
Framework arguments: -keyring /Users/david/.eclipse_keyring -showlocation
Command-line arguments: -os macosx -ws cocoa -arch x86 -keyring /Users/david/.eclipse_keyring -consoleLog -showlocation
!ENTRY org.eclipse.core.resources 2 10035 2011-09-13 15:08:02.101
!MESSAGE The workspace exited with unsaved changes in the previous session; refreshing workspace to recover changes.
!ENTRY org.eclipse.ui 2 0 2011-09-13 15:08:02.905
!MESSAGE Warnings while parsing the commands from the 'org.eclipse.ui.commands' and 'org.eclipse.ui.actionDefinitions' extension points.
!SUBENTRY 1 org.eclipse.ui 2 0 2011-09-13 15:08:02.906
!MESSAGE Commands should really have a category: plug-in='com.qnx.flashbuilder.multiplatform.qnx.ui', id='com.qnx.flashbuilder.multiplatform.qnx.ui.commands.OpenInfoCenter', categoryId='com.qnx.flashbuilder.multiplatform.qnx.ui.commands.category.help'

Delete the Adobe Flash Builder 4.5 folder from your Documents (assuming you don't have anything valuable in there). That seemed to work for me, as I don't keep my projects in there but there were some temp files that were breaking it. You'll probably have to re-inport your projects.
Adobe, I'm getting very sick of your (expensive) products wasting my time.

My Satellite P300-24T hangs consequently during startup

AFter 3 years of service without problems my laptops doesnt want to operate in normal mode.It starts up but after startup with the desktop screen it doesnt react at all (even not on Ctrl+alt+del). It restarts after on/off button for 3 seconds.
Chkdsk doesnt finds problems with the harddisk, probabely there is a hardware problem on graphics card. Any idea how I can find a solution on this?

Hi, it;s a P300-24T. I tried to use the auto recovery option. I used the F8 option during startup it comes back with a error message now that a disk read error occured. I don't have an recovery disk on dvd or a Microsoft disk available; Windows Vista was preinstalled.

PLEASE HELP ! While updating My Xperia Z1 , my pc hanged during the process and .

While updating My Xperia Z1 , my pc hanged during the process ( so , installation of update was interrupted , guess it's same as getting your USB connection disconnected )and now the phone won't turn on .
Its shows the Sony Xperia logo , then shows a black lit screen , and that's it , nothing else happens . I can only turn it off by pressing and holding the power+up volume button , but it turns on automatically if plugged in for charging or in PC only till it gets that black screen .
I tried to flash it with a flashtool (Emma) , but it says phone locked , but since it can't even be turned on , i can't unlock it .
It's a store bought phone and is not of any contracts with any mobile service provider or anything like that ....
Funny you know ... my PC had to crash at the moment i was updating it .... my luck ....
Anyways , now please can anyone tell me what i can do ? I'm sure there is a way i can fix it using my pc and other downloadable software , so please can some one help me how i can fix this problem ? I don't care if i lose all the data on it , i just want my phone back ....
Solved!
Go to Solution.

Problem Solved ,Thank you very much !!
For those who might face the problem and stumble upon this thread after googling
Read above mentioned comments
Now here's what I did :
Turned the phone off by power+volume key method , then plugged it in to the pc via USB and opened sony pc companion , entered Support zone , then entered the Update device option , then I Unplugged my device , only after doing this a window pops up with Repair my phone/tablet in blue text , then i clicked on that and followed the simple instructions ..
It's basically what Thommo said , only i was so freaked out at that time that i failed to follow his instructions to the letter
So now my phone is back to normal , and , it got the latest lolipop update !
Problem solved i guess but Thommo , i need to disturb you again with just one more question , since at the very beginning , the update process was interrupted , and now i got lolipop after the repair ,without needing to update again , so has the lollipop been installed properly on my phone or do i need to use any other flashtool to re-install lollipop ?
again , Thank you ...

JDeveloper hangs on startup

Hi
I have tried to install JDeveloper on my standalone PC.
I had JDeveloper 1.0 working but then tried to install
the 2.0 beta. Since then no matter which version of
JDeveloper I install (1 or 2), when I run it, it simply displays
the title graphic and then hangs. I have deinstalled
all previous versions, and no errors are reported when
installing. I have a Windows NT machine with 128 MB RAM,
256 MB virtual memory and the following other Oracle software
installed (in three homes, as reported by Universal Installer):
OraHome81
Oracle 8i Enterprise Edition 8.1.5.0.0
Oracle 8i Client 8.1.5.0.0
Oracle Programmer 8.1.5.0.0
OraHomeWebDB
Oracle 8 Enterprise Edition 8.0.5.0.0
Oracle Designer Release 2.1.2
WebDB 2.0.5.6.1
Developer 6.0
OraHomeOAS40
OAS Enterprise Edition 4.0.7.0.0
Oracle 8 Client 8.0.5.0.0
Independent Products
Java Runtime Environment 1.1.7
What could the possible problems be? I suspect that
the Aurora system is not starting properly.
David
null

Hi
JDeveloper 2.0 has been in production for a while. Don't install
the beta software anymore. Try with the production release.
Aurora is part of 8i and JDeveloper has a client library for
that. There is no dependency for that during startup.
Make sure that your PC has equalto or more than 256 colors in the
settings
regards
David Fraser (guest) wrote:
: Hi
: I have tried to install JDeveloper on my standalone PC.
: I had JDeveloper 1.0 working but then tried to install
: the 2.0 beta. Since then no matter which version of
: JDeveloper I install (1 or 2), when I run it, it simply
displays
: the title graphic and then hangs. I have deinstalled
: all previous versions, and no errors are reported when
: installing. I have a Windows NT machine with 128 MB RAM,
: 256 MB virtual memory and the following other Oracle software
: installed (in three homes, as reported by Universal Installer):
: OraHome81
: Oracle 8i Enterprise Edition 8.1.5.0.0
: Oracle 8i Client 8.1.5.0.0
: Oracle Programmer 8.1.5.0.0
: OraHomeWebDB
: Oracle 8 Enterprise Edition 8.0.5.0.0
: Oracle Designer Release 2.1.2
: WebDB 2.0.5.6.1
: Developer 6.0
: OraHomeOAS40
: OAS Enterprise Edition 4.0.7.0.0
: Oracle 8 Client 8.0.5.0.0
: Independent Products
: Java Runtime Environment 1.1.7
: What could the possible problems be? I suspect that
: the Aurora system is not starting properly.
: David
null

Freeze during startup

During startup, the system freezes (no cursor, no keys).
It boots as far as the "Log On to Windows" screen. The cursor still moves, and then it stops after perhaps 30 seconds
(keys non-functional too),
Tried the rescue and recovery but when it gets to Step 1 with choices including "Restore my gard drive to the original factory state" everything freezes again.
Prior to this problem the system would hang during shutdown.
How do I get past this point?
(T43 with XP sp3)

Welcome to the forum!
Sounds like a failing SouthBridge chip to me.
Try removing the hard drive and booting from a "live" Linux CD.
If you experience the same type of freezing there, you're likely looking at a motherboard swap.
Good luck.
Cheers,
George
In daily use: R60F, R500F, T61, T410
Collecting dust: T60
Enjoying retirement: A31p, T42p,
Non-ThinkPads: Panasonic CF-31 & CF-52, HP 8760W
Starting Thursday, 08/14/2014 I'll be away from the forums until further notice. Please do NOT send private messages since I won't be able to read them. Thank you.

Mobile hanged during startup

Similar Messages

Maybe you are looking for