Mobile Jetpack is a scam

I hate to post this but Verizon left me with no other outlets. 
My Jetpack broke right around the warranty date... I called and they told me to bring it to store, which I did.  The store then said it was broken and needed to be replaced.  I called again, but the warranty had expired in the two days that had passed.  They tried to hold me to that even though I had already called 2 days beforehand.  I spent over an hour on the phone and had to be elevated to the manager before they agreed to replace the device 
THEN, they mailed me a replacement, I mailed back the old one and stopped thinking about it.  I didn't hear anything so I assumed it was taken care of, then I got a call they never got the old device.  I have now called 5 times over the course of the last 3 weeks trying to track this thing down.  The last call was on 9/18.  They can't find the tracking number and told me I was responsible to track the device.  When I pointed out that they gave me the label, they said that it was still my responsibility.  I also pointed out that wasn't in my Terms & Conditions, they said I had agreed to another Terms & Conditions by requesting a replacement.  I said that wouldn't be legally binding as I never saw the contract, and I never actually said I agreed to anything.  So I asked if I could see the new terms and conditions and she said "no."  Amy.  Employee ID 324622.  She did everything just short of actually using the word "liar" but she basically said she couldn;t believe me because I didn't remember the details of the mailing label I had dropped off 33 days beforehand (I had initially mailed it on 8/15).  Do you remember what you had for breakfast 33 days ago?  How about what you wore?  how about what you did?  Not easy to do without a calendar in front of you... even harder when a hostile operator is peppering you with questions and calling you a liar.
Now I have spoken to multiple managers, all of whom have promised to call me back, none of whom actually have called back.  They charged me $269.99 for it.  It's actually a better option for me to send back the brand new device and continue paying $20 per month for another year (for a device I won't even have). 
Verizon is losing a customer.  I hate you.

There is also a form and anti-piracy section on the Adobe website.
Report form
Pirated software | Adobe Anti-piracy

Similar Messages

  • Jetpack 4G LTE Mobile Hotspot

    How can I figure out why our Jetpack 4G LTE Mobile Hotspot is using so much data - even at times when we are not even home?

        We'd love to help you get connected to all of your devices, MFyfe.  There's some fantastic support for the 5510L at http://vz.to/1kw77uh to help with connecting your Jetpack to any WiFi compatible device http://vz.to/1d0UkfO or as a tethered modem http://vz.to/1en8gQy. For help specifically with a Linksys device, you may need to reach out to Linksys directly at www.linksys.com for how to create a connection with your Jetpack.
    Thank you
    JenniferH_VZW
    Please follow us on Twitter @vzwsupport

  • Where is the WPS button on my Verizon Jetpack 4G LTE Mobile HotSpot - MiFi 5510L?

    Where is the WPS button my my Verizon Jetpack® 4G LTE Mobile HotSpot - MiFi® 5510L?

        Thank you for reaching out to us, roser0322. The MiFi 5510L is a sweet device! Regarding the WPS services, the MiFi does not feature that service for wireless set up.
    NicandroN_VZW
    Follow us on twitter @VZWSupport

  • Verizon Jetpack 4G LTE Mobile Hotspot Nat Type

    Is there any way to change the nat type to open on this bad boy?
    It's a great device and there aren't any problems with it, it does what I need except connect to people I want to connect to.
    I casually use it to play games and I can connect to some people, from here in indiana to all the way down in texas, but my friend down the road, noooopee.
    The only way to connect to him is to have a host connect us so we can never play just us.
    I've tried everything else and I'm almost 100% sure that it is the NAT settings keeping this from working.
    Long story short:
    Can you change the  Verizon Jetpack™ 4G LTE Mobile Hotspot NAT settings?
    If no, why on earth not?

    The only way Port Forwarding can be effective is if the governing firewall approves the network communication in the first place.  The older 3G and 1x networks were well known to allow many custom protocols where as the new 4G network has nearly everything locked down. 
    Theoretically if you can get onto the old networks your port forwarding modifications would work.
    However, VZW has been tightening its grip on the older 3G networks so you may have to wait for a specific IP Assignement before you can have confirmation that it will work.  That may require rebooting the device multiple times until you happen to get assigned a "Good" IP. 
    Not sure why your signin credentials are changing as you switch from one network to another.  The same router admin credentials should not be impacted by these changes.  It should always be admin/admin or something similar by default.

  • Verizon Jetpack 4G LTE Mobile Hotspot 890L. Is there a problem with Windows 7?????

    I have Verizon Jetpack 4G LTE Mobile Hotspot 890L. Have had it for almost 2 years. I was on the internet with my Dell desktop and all of a sudden got a message "not connected to Internet". Spent an hour with Verizon and the Jetpack works fine on my NOOK and another tablet and they said to call Dell. After an hour with them they said Windows 7 is not compatible with a HotSpot and they do not support it.  I had a friend check out my computer (as Dell wanted over $200) and found nothing wrong and it connected fine to his wifi, with no problem.  So HELP what is wrong with my Verizon Hotspot??

    I don't see that anything is wrong with your Hotspot from the description you posted here.
    First of all the network status indicator built by Win7 is not 100% reliable to begin with.  MS has a simple algorithm that it uses to check internet resources.  When those resources do not respond the status indicator will bounce back and update the user accordingly.  You should always perform your own internet check by manually navigating to Google.com or another public website rather than depend on what Win7 is telling you.
    Second of all you know your Jetpack was working because your other personal devices were working.  This makes me think there was some kind of a temporary glitch that would normally be resolved by rebooting either the Jetpack or your PC.
    Finally, Dell does not support VZW devices.  When they say the hotspot is not supported they mean Dell does not support VZW products.  You may have misinterpreted what was said.  Dell is only going to support the Dell PC hardware and very basic Win7 problems such as walking you though the connection process.  When something is wrong with the network connection they will always tell you that it is not supported as they have no control over 3rd party vendors.  Win7 supports the Jetpack just fine, the Jetpack is a WiFi hotspot just like any other from Win7s perspective.
    If you are having more troubles in the future then I suggest starting with a simple reboot of your devices.  Post back to us here and let us know if that is the case or not.

  • I'm using my Verizon Jetpack 4G LTE Mobile Hotspot MHS291L to wirelessly connect my printer to my desktop and tablet will the printer use my monthly data to print/recieve info from my computer/tablet

    I know a normal wireless router would allow me to connect my printer to my desktop and tablet but will using my Verizon Jetpack® 4G LTE Mobile Hotspot MHS291L as a access point incur data usage each month?

        Hello Heath76, you pose an excellent question! Yes, if the Jetpack is used as an access point for any of the devices listed it will incur data usage.
    WiltonA_VZW
    VZW Support
    Follow us on twitter @VZWSupport

  • Came to the site scams that under the guise update to Safari asked to enter the mobile phone.

    Came to the site scams that under the guise update to Safari asked to enter the mobile phone. Enter there not your phone number, asks to enter some code. From these boxes can be removed only by unloading of the ambiguity of the Safari and then quickly close the tab. But how to make these Windows do not appear at all? This same problem is observed on my iMac.
    Screenshots iPad
    http://pbrd.co/14kNVoX
    http://pbrd.co/14kNTgW
    http://pbrd.co/14kNXx6
    Screenshots iMac
    http://pbrd.co/14kO2AS
    http://pbrd.co/14kO8J1
    http://pbrd.co/14kOj74
    The screenshots interface in Russian, sorry.

    Try Settings > Safari > Clear History and Clear Cookies And Data and then close Safari via the iPad's taskbar and do a soft-reset
    To close Safari : from the home screen (i.e. not with Safari 'open' on-screen) double-click the home button to bring up the taskbar at the bottom of the screen, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Safari app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
    A soft-reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.
    When you re-open Safari it should be just a blank tab

  • Verizon Jetpack 4G LTE Mobile Hotspot 890L Help

    Hello how are you? I am doing well. I am trying to set up the Verizon Jetpack on my desktop. I am clueless how to do that. I have it on my laptop. I just want it on my destop...
    I have windows 7 and HP desktop. I just recently bought the computer. So I don't have no internet on the desktop. And the Jetpack is how I connect to the interenet. As so many others due.. So I really need step by step intructions on how to do this. I know that it can be done. I have emailed verizon but have not heard back from them..
    Thanks
    Melissa

        Bsufan09, I'm doing great and I'm here to fill in the clues for you about setting up your Hotspot. Since the Hotspot is not setup to be used with VZAccess Manager or via USB cable, you would connect wirelessly the same as you do on your laptop. There is no software to install. Does your desktop have a wireless card installed? Normally Windows 7 will show an icon at the bottom right with the signal bars. This is your wireless network connection screen. To connect to a WiFi network, you can tap that icon and search available connections. Here is some more info with screenshots. http://bit.ly/WioTlT
    MarquiaF_VZW
    Follow us on Twitter @VZWSupport

  • Mobile phone "scam"

    I have received a circular through official channels at my work relating to a "scam" whereby a caller requests phone users press#90 or #09. This allegedly allows access to the user's SIM card. Also, that a caller "Xalan" infects sim cards with a virus.
    Allegedly, this has been confirmed by Nokia and Motorola.
    I have refused to dissemminate this info. further as I believe it is bogus. Can you confirm?

    By the way, did anybody ever got the email that said if you send it to 10 people you know, an "Anna Swelan" from Nokia would send you a "Nokia wap phone"?
    Can't believe how many of my mates fell for that!
    btw wonder if Anna is online on the boards
    All those who believe in psychokinesis raise my hand.

  • APPLE iPHONE UK MOBILE PROMO 2014 (legit or scam)

    Okay. It's 2014 already. I received a message regarding IPHONE-UK PROMO saying that my number won a million pounds. What the heck?!? I'm from Asia and why would they know my number in the first place. Is this legit or just the same SCAM flying around? Please someone help me confirm this. Who wouldn't want to be a millionaire eh? Thanks!! God bless y'll!

    Thanks a lot! At the back of my mind I know its a scam but still hopeful. Haha

  • Help with dmz or port forwarding on Verizon Jetpack 4G LTE Mobile Hotspot 890L

    I really need help with this I want to play gta v but I have strict nat type on ps4 and everytime I go to the dmz on the ip website it shows the ip and the other side shows add and a dot I click on my ip and click apply but it tells me delete this ip but it also won't even let me delete the ip

    You may wish to ask this question over at the Verizon Wireless forums: https://www.verizonwireless.com/community . This community is for DSL and FiOS support, not LTE hotspot support.
    Be aware, Verizon Wireless uses Carrier-grade NAT, and your Hotspot also performs NAT. Game consoles do not like being behind Double NAT. Depending on how your hotspot is set up on the back end, you may only be able to achieve Moderate NAT / NAT 2 on the hotspot. If your hotspot has a public Internet IP, you should be able to hit Open NAT.
    ========
    The first to bring me 1Gbps Fiber for $30/m wins!

  • Mobility Radeon 7500 OpenGL issues

    Whenever I attempt to use anything involving openGL, my CPU usage hits 100%. Complex openGL programs will drop to a framerate of less than 10, and sometimes crash Xorg.  How can I fix this?
    General system info:
    lspci
    00:00.0 Host bridge: Intel Corporation 82845 845 [Brookdale] Chipset Host Bridge (rev 04)
    00:01.0 PCI bridge: Intel Corporation 82845 845 [Brookdale] Chipset AGP Bridge (rev 04)
    00:1d.0 USB Controller: Intel Corporation 82801CA/CAM USB Controller #1 (rev 02)
    00:1d.1 USB Controller: Intel Corporation 82801CA/CAM USB Controller #2 (rev 02)
    00:1d.2 USB Controller: Intel Corporation 82801CA/CAM USB Controller #3 (rev 02)
    00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 42)
    00:1f.0 ISA bridge: Intel Corporation 82801CAM ISA Bridge (LPC) (rev 02)
    00:1f.1 IDE interface: Intel Corporation 82801CAM IDE U100 Controller (rev 02)
    00:1f.3 SMBus: Intel Corporation 82801CA/CAM SMBus Controller (rev 02)
    00:1f.5 Multimedia audio controller: Intel Corporation 82801CA/CAM AC'97 Audio Controller (rev 02)
    00:1f.6 Modem: Intel Corporation 82801CA/CAM AC'97 Modem Controller (rev 02)
    01:00.0 VGA compatible controller: ATI Technologies Inc Radeon Mobility M7 LW [Radeon Mobility 7500]
    02:00.0 CardBus bridge: Texas Instruments PCI1520 PC card Cardbus Controller (rev 01)
    02:00.1 CardBus bridge: Texas Instruments PCI1520 PC card Cardbus Controller (rev 01)
    02:02.0 Network controller: Broadcom Corporation BCM4318 [AirForce One 54g] 802.11g Wireless LAN Controller (rev 02)
    02:08.0 Ethernet controller: Intel Corporation 82801CAM (ICH3) PRO/100 VE (LOM) Ethernet Controller (rev 42)
    lsmod
    Module Size Used by
    ipv6 279604 16
    oss_usb 106284 2
    oss_ich 18832 4
    osscore 552820 4 oss_usb,oss_ich
    ext2 68964 1
    fan 4448 0
    fuse 64856 2
    arc4 1756 2
    ecb 2812 2
    b43 137208 0
    radeon 666112 2
    ttm 37164 1 radeon
    joydev 10528 0
    drm 156160 4 radeon,ttm
    i2c_algo_bit 5888 1 radeon
    e100 34308 0
    ssb 45988 1 b43
    ppdev 7008 0
    yenta_socket 25384 2
    rsrc_nonstatic 12316 1 yenta_socket
    mii 4892 1 e100
    thinkpad_acpi 67988 0
    battery 10816 0
    nvram 6984 1 thinkpad_acpi
    video 20116 0
    output 2908 1 video
    pcmcia 36168 2 b43,ssb
    parport_pc 37060 1
    irtty_sir 5564 0
    sir_dev 11712 1 irtty_sir
    psmouse 60084 0
    ac 4224 0
    processor 36076 1
    iTCO_wdt 11072 0
    iTCO_vendor_support 3136 1 iTCO_wdt
    mac80211 155788 1 b43
    irda 126744 1 sir_dev
    crc_ccitt 1724 1 irda
    thermal 13912 0
    uhci_hcd 23692 0
    button 5612 0
    ehci_hcd 36620 0
    serio_raw 5792 0
    shpchp 34384 0
    intel_agp 28604 1
    lp 9732 0
    parport 34412 3 ppdev,parport_pc,lp
    evdev 10240 15
    cfg80211 90364 2 b43,mac80211
    pci_hotplug 28732 1 shpchp
    pcspkr 2492 0
    i2c_i801 9616 0
    i2c_core 21808 4 radeon,drm,i2c_algo_bit,i2c_i801
    rfkill 19696 2 thinkpad_acpi,cfg80211
    sg 27728 0
    agpgart 32660 3 ttm,drm,intel_agp
    led_class 4000 2 b43,thinkpad_acpi
    usbcore 154032 5 oss_usb,uhci_hcd,ehci_hcd
    pcmcia_core 35920 5 b43,ssb,yenta_socket,rsrc_nonstatic,pcmcia
    rtc_cmos 11344 0
    rtc_core 17976 1 rtc_cmos
    rtc_lib 2524 1 rtc_core
    ext4 334112 2
    mbcache 7104 2 ext2,ext4
    jbd2 82016 1 ext4
    crc16 1660 1 ext4
    sr_mod 16644 0
    cdrom 36032 1 sr_mod
    sd_mod 28344 5
    pata_acpi 4252 0
    ata_piix 23268 4
    ata_generic 4704 0
    libata 169548 3 pata_acpi,ata_piix,ata_generic
    floppy 56356 0
    scsi_mod 112468 4 sg,sr_mod,sd_mod,libata
    dmesg
    Linux version 2.6.31-ARCH (root@architect) (gcc version 4.4.2 (GCC) ) #1 SMP PREEMPT Tue Nov 10 19:48:17 CET 2009
    KERNEL supported cpus:
    Intel GenuineIntel
    AMD AuthenticAMD
    NSC Geode by NSC
    Cyrix CyrixInstead
    Centaur CentaurHauls
    Transmeta GenuineTMx86
    Transmeta TransmetaCPU
    UMC UMC UMC UMC
    BIOS-provided physical RAM map:
    BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
    BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
    BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
    BIOS-e820: 0000000000100000 - 000000003ff70000 (usable)
    BIOS-e820: 000000003ff70000 - 000000003ff7e000 (ACPI data)
    BIOS-e820: 000000003ff7e000 - 000000003ff80000 (ACPI NVS)
    BIOS-e820: 000000003ff80000 - 0000000040000000 (reserved)
    BIOS-e820: 00000000ff800000 - 0000000100000000 (reserved)
    DMI present.
    last_pfn = 0x3ff70 max_arch_pfn = 0x100000
    MTRR default type: uncachable
    MTRR fixed ranges enabled:
    00000-9FFFF write-back
    A0000-BFFFF uncachable
    C0000-CFFFF write-protect
    D0000-DBFFF uncachable
    DC000-DFFFF write-back
    E0000-FFFFF write-protect
    MTRR variable ranges enabled:
    0 base 000000000 mask FC0000000 write-back
    1 base 03FF80000 mask FFFF80000 uncachable
    2 disabled
    3 disabled
    4 disabled
    5 disabled
    6 disabled
    7 disabled
    x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    e820 update range: 0000000000002000 - 0000000000006000 (usable) ==> (reserved)
    Scanning 1 areas for low memory corruption
    modified physical RAM map:
    modified: 0000000000000000 - 0000000000002000 (usable)
    modified: 0000000000002000 - 0000000000006000 (reserved)
    modified: 0000000000006000 - 000000000009f000 (usable)
    modified: 000000000009f000 - 00000000000a0000 (reserved)
    modified: 00000000000dc000 - 0000000000100000 (reserved)
    modified: 0000000000100000 - 000000003ff70000 (usable)
    modified: 000000003ff70000 - 000000003ff7e000 (ACPI data)
    modified: 000000003ff7e000 - 000000003ff80000 (ACPI NVS)
    modified: 000000003ff80000 - 0000000040000000 (reserved)
    modified: 00000000ff800000 - 0000000100000000 (reserved)
    initial memory mapped : 0 - 01800000
    init_memory_mapping: 0000000000000000-00000000377fe000
    0000000000 - 0000400000 page 4k
    0000400000 - 0037400000 page 2M
    0037400000 - 00377fe000 page 4k
    kernel direct mapping tables up to 377fe000 @ 7000-c000
    RAMDISK: 3fea7000 - 3ff5fb2e
    Allocated new RAMDISK: 00100000 - 001b8b2e
    Move RAMDISK from 000000003fea7000 - 000000003ff5fb2d to 00100000 - 001b8b2d
    ACPI: RSDP 000f7010 00024 (v02 IBM )
    ACPI: XSDT 3ff731cd 0004C (v01 IBM TP-1I 00002080 LTP 00000000)
    ACPI: FACP 3ff73300 00081 (v01 IBM TP-1I 00002080 IBM 00000001)
    ACPI: DSDT 3ff733e7 0AAD5 (v01 IBM TP-1I 00002080 MSFT 0100000D)
    ACPI: FACS 3ff7f000 00040
    ACPI: SSDT 3ff733b4 00033 (v01 IBM TP-1I 00002080 MSFT 0100000D)
    ACPI: ECDT 3ff7debc 00052 (v01 IBM TP-1I 00002080 IBM 00000001)
    ACPI: TCPA 3ff7df0e 00032 (v01 IBM TP-1I 00002080 PTL 00000001)
    ACPI: BOOT 3ff7dfd8 00028 (v01 IBM TP-1I 00002080 LTP 00000001)
    135MB HIGHMEM available.
    887MB LOWMEM available.
    mapped low ram: 0 - 377fe000
    low ram: 0 - 377fe000
    node 0 low ram: 00000000 - 377fe000
    node 0 bootmap 00008000 - 0000ef00
    (9 early reservations) ==> bootmem [0000000000 - 00377fe000]
    #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
    #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
    #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
    #3 [0001000000 - 000156da44] TEXT DATA BSS ==> [0001000000 - 000156da44]
    #4 [000009f000 - 0000100000] BIOS reserved ==> [000009f000 - 0000100000]
    #5 [000156e000 - 0001574128] BRK ==> [000156e000 - 0001574128]
    #6 [0000007000 - 0000008000] PGTABLE ==> [0000007000 - 0000008000]
    #7 [0000100000 - 00001b8b2e] NEW RAMDISK ==> [0000100000 - 00001b8b2e]
    #8 [0000008000 - 000000f000] BOOTMAP ==> [0000008000 - 000000f000]
    Zone PFN ranges:
    DMA 0x00000000 -> 0x00001000
    Normal 0x00001000 -> 0x000377fe
    HighMem 0x000377fe -> 0x0003ff70
    Movable zone start PFN for each node
    early_node_map[3] active PFN ranges
    0: 0x00000000 -> 0x00000002
    0: 0x00000006 -> 0x0000009f
    0: 0x00000100 -> 0x0003ff70
    On node 0 totalpages: 261899
    free_area_init_node: node 0, pgdat c141b740, node_mem_map c1575000
    DMA zone: 32 pages used for memmap
    DMA zone: 0 pages reserved
    DMA zone: 3963 pages, LIFO batch:0
    Normal zone: 1744 pages used for memmap
    Normal zone: 221486 pages, LIFO batch:31
    HighMem zone: 271 pages used for memmap
    HighMem zone: 34403 pages, LIFO batch:7
    Using APIC driver default
    ACPI: PM-Timer IO Port: 0x1008
    SMP: Allowing 1 CPUs, 0 hotplug CPUs
    Local APIC disabled by BIOS -- you can enable it with "lapic"
    APIC: disable apic facility
    nr_irqs_gsi: 16
    PM: Registered nosave memory: 0000000000002000 - 0000000000006000
    PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
    PM: Registered nosave memory: 00000000000a0000 - 00000000000dc000
    PM: Registered nosave memory: 00000000000dc000 - 0000000000100000
    Allocating PCI resources starting at 40000000 (gap: 40000000:bf800000)
    NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1
    PERCPU: Embedded 14 pages at c1d7a000, static data 34332 bytes
    Built 1 zonelists in Zone order, mobility grouping on. Total pages: 259852
    Kernel command line: root=/dev/disk/by-uuid/ce79e597-2b00-4812-95b4-eda62758ab6c ro vga=792 nomodeset
    PID hash table entries: 4096 (order: 12, 16384 bytes)
    Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
    Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
    Enabling fast FPU save and restore... done.
    Enabling unmasked SIMD FPU exception support... done.
    Initializing CPU#0
    Initializing HighMem for node 0 (000377fe:0003ff70)
    Memory: 1031828k/1048000k available (3111k kernel code, 15416k reserved, 1120k data, 416k init, 138696k highmem)
    virtual kernel memory layout:
    fixmap : 0xfff1e000 - 0xfffff000 ( 900 kB)
    pkmap : 0xff800000 - 0xffc00000 (4096 kB)
    vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
    lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
    .init : 0xc1422000 - 0xc148a000 ( 416 kB)
    .data : 0xc1309ddd - 0xc1421ea8 (1120 kB)
    .text : 0xc1000000 - 0xc1309ddd (3111 kB)
    Checking if this processor honours the WP bit even in supervisor mode...Ok.
    SLUB: Genslabs=13, HWalign=128, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
    NR_IRQS:512
    Fast TSC calibration using PIT
    Detected 2192.708 MHz processor.
    Console: colour dummy device 80x25
    console [tty0] enabled
    Calibrating delay loop (skipped), value calculated using timer frequency.. 4387.14 BogoMIPS (lpj=7309026)
    Security Framework initialized
    Mount-cache hash table entries: 512
    CPU: Trace cache: 12K uops, L1 D cache: 8K
    CPU: L2 cache: 512K
    CPU: Hyper-Threading is disabled
    mce: CPU supports 4 MCE banks
    ------------[ cut here ]------------
    WARNING: at arch/x86/kernel/apic/apic.c:247 native_apic_write_dummy+0x4b/0x60()
    Hardware name: 236686U
    Modules linked in:
    Pid: 0, comm: swapper Not tainted 2.6.31-ARCH #1
    Call Trace:
    [<c10464da>] ? warn_slowpath_common+0x7a/0xc0
    [<c101f2ab>] ? native_apic_write_dummy+0x4b/0x60
    [<c1046540>] ? warn_slowpath_null+0x20/0x40
    [<c101f2ab>] ? native_apic_write_dummy+0x4b/0x60
    [<c1016601>] ? intel_init_thermal+0xd1/0x1d0
    [<c10149c3>] ? mce_init+0xc3/0xf0
    [<c10ed693>] ? __kmalloc+0x93/0x210
    [<c1015bc5>] ? mce_intel_feature_init+0x15/0x70
    [<c13014ed>] ? mcheck_init+0x261/0x2b5
    [<c12ff55a>] ? identify_cpu+0x377/0x386
    [<c10ecabf>] ? kmem_cache_alloc+0x6f/0x170
    [<c1429dc9>] ? identify_boot_cpu+0xa/0x1e
    [<c1429f90>] ? check_bugs+0x14/0x108
    [<c109add0>] ? __delayacct_tsk_init+0x20/0x50
    [<c1422a31>] ? start_kernel+0x332/0x353
    [<c14224f0>] ? unknown_bootoption+0x0/0x1bd
    ---[ end trace a7919e7f17c0a725 ]---
    CPU0: Thermal monitoring enabled (TM1)
    Performance Counters: no PMU driver, software counters only.
    Checking 'hlt' instruction... OK.
    SMP alternatives: switching to UP code
    Freeing SMP alternatives: 11k freed
    ACPI: Core revision 20090521
    ACPI: setting ELCR to 0200 (from 0800)
    weird, boot CPU (#0) not listed by the BIOS.
    SMP motherboard not detected.
    Local APIC not detected. Using dummy APIC emulation.
    SMP disabled
    Brought up 1 CPUs
    Total of 1 processors activated (4387.14 BogoMIPS).
    CPU0 attaching NULL sched-domain.
    Booting paravirtualized kernel on bare hardware
    NET: Registered protocol family 16
    ACPI: bus type pci registered
    PCI: PCI BIOS revision 2.10 entry at 0xfd8fe, last bus=8
    PCI: Using configuration type 1 for base access
    bio: create slab <bio-0> at 0
    ACPI: EC: EC description table is found, configuring boot EC
    ACPI: EC: non-query interrupt received, switching to interrupt mode
    ACPI: Interpreter enabled
    ACPI: (supports S0 S3 S4 S5)
    ACPI: Using PIC for interrupt routing
    ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62
    ACPI: EC: driver started in interrupt mode
    ACPI: Power Resource [PUBS] (on)
    ACPI: ACPI Dock Station Driver: 3 docks/bays found
    ACPI: PCI Root Bridge [PCI0] (0000:00)
    pci 0000:00:00.0: reg 10 32bit mmio: [0xe0000000-0xe3ffffff]
    pci 0000:00:1d.0: reg 20 io port: [0x1800-0x181f]
    pci 0000:00:1d.1: reg 20 io port: [0x1820-0x183f]
    pci 0000:00:1d.2: reg 20 io port: [0x1840-0x185f]
    pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH4 ACPI/GPIO/TCO
    pci 0000:00:1f.0: quirk: region 1180-11bf claimed by ICH4 GPIO
    pci 0000:00:1f.1: reg 10 io port: [0x1f0-0x1f7]
    pci 0000:00:1f.1: reg 14 io port: [0x3f4-0x3f7]
    pci 0000:00:1f.1: reg 18 io port: [0x170-0x177]
    pci 0000:00:1f.1: reg 1c io port: [0x374-0x377]
    pci 0000:00:1f.1: reg 20 io port: [0x1860-0x186f]
    pci 0000:00:1f.1: reg 24 32bit mmio: [0x000000-0x0003ff]
    pci 0000:00:1f.3: reg 20 io port: [0x1880-0x189f]
    pci 0000:00:1f.5: reg 10 io port: [0x1c00-0x1cff]
    pci 0000:00:1f.5: reg 14 io port: [0x18c0-0x18ff]
    pci 0000:00:1f.6: reg 10 io port: [0x2400-0x24ff]
    pci 0000:00:1f.6: reg 14 io port: [0x2000-0x207f]
    pci 0000:01:00.0: reg 10 32bit mmio: [0xe8000000-0xefffffff]
    pci 0000:01:00.0: reg 14 io port: [0x3000-0x30ff]
    pci 0000:01:00.0: reg 18 32bit mmio: [0xd0100000-0xd010ffff]
    pci 0000:01:00.0: reg 30 32bit mmio: [0x000000-0x01ffff]
    pci 0000:01:00.0: supports D1 D2
    pci 0000:00:01.0: bridge io port: [0x3000-0x3fff]
    pci 0000:00:01.0: bridge 32bit mmio: [0xd0100000-0xd01fffff]
    pci 0000:00:01.0: bridge 32bit mmio pref: [0xe8000000-0xefffffff]
    pci 0000:02:00.0: reg 10 32bit mmio: [0x50000000-0x50000fff]
    pci 0000:02:00.0: supports D1 D2
    pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
    pci 0000:02:00.0: PME# disabled
    pci 0000:02:00.1: reg 10 32bit mmio: [0x51000000-0x51000fff]
    pci 0000:02:00.1: supports D1 D2
    pci 0000:02:00.1: PME# supported from D0 D1 D2 D3hot D3cold
    pci 0000:02:00.1: PME# disabled
    pci 0000:02:02.0: reg 10 32bit mmio: [0xd0200000-0xd0201fff]
    pci 0000:02:08.0: reg 10 32bit mmio: [0xd0202000-0xd0202fff]
    pci 0000:02:08.0: reg 14 io port: [0x8000-0x803f]
    pci 0000:02:08.0: supports D1 D2
    pci 0000:02:08.0: PME# supported from D0 D1 D2 D3hot D3cold
    pci 0000:02:08.0: PME# disabled
    pci 0000:00:1e.0: transparent bridge
    pci 0000:00:1e.0: bridge io port: [0x4000-0x8fff]
    pci 0000:00:1e.0: bridge 32bit mmio: [0xd0200000-0xdfffffff]
    pci 0000:00:1e.0: bridge 32bit mmio pref: [0xf0000000-0xf7ffffff]
    pci_bus 0000:00: on NUMA node 0
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
    ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11)
    ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11)
    ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11)
    ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11)
    ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11)
    ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
    ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
    ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
    PCI: Using ACPI for IRQ routing
    NetLabel: Initializing
    NetLabel: domain hash size = 128
    NetLabel: protocols = UNLABELED CIPSOv4
    NetLabel: unlabeled traffic allowed by default
    pnp: PnP ACPI init
    ACPI: bus type pnp registered
    pnp: PnP ACPI: found 13 devices
    ACPI: ACPI bus type pnp unregistered
    system 00:00: iomem range 0x0-0x9ffff could not be reserved
    system 00:00: iomem range 0xc0000-0xc3fff could not be reserved
    system 00:00: iomem range 0xc4000-0xc7fff could not be reserved
    system 00:00: iomem range 0xc8000-0xcbfff could not be reserved
    system 00:00: iomem range 0xcc000-0xcffff could not be reserved
    system 00:00: iomem range 0xdc000-0xdffff could not be reserved
    system 00:00: iomem range 0xe0000-0xe3fff could not be reserved
    system 00:00: iomem range 0xe4000-0xe7fff could not be reserved
    system 00:00: iomem range 0xe8000-0xebfff could not be reserved
    system 00:00: iomem range 0xec000-0xeffff could not be reserved
    system 00:00: iomem range 0xf0000-0xfffff could not be reserved
    system 00:00: iomem range 0x100000-0x3fffffff could not be reserved
    system 00:00: iomem range 0xfec00000-0xffffffff could not be reserved
    system 00:02: ioport range 0x1000-0x107f has been reserved
    system 00:02: ioport range 0x1180-0x11bf has been reserved
    system 00:02: ioport range 0x15e0-0x15ef has been reserved
    system 00:02: ioport range 0x1600-0x167f has been reserved
    pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
    pci 0000:00:01.0: IO window: 0x3000-0x3fff
    pci 0000:00:01.0: MEM window: 0xd0100000-0xd01fffff
    pci 0000:00:01.0: PREFETCH window: 0xe8000000-0xefffffff
    pci 0000:02:00.0: CardBus bridge, secondary bus 0000:03
    pci 0000:02:00.0: IO window: 0x004000-0x0040ff
    pci 0000:02:00.0: IO window: 0x004400-0x0044ff
    pci 0000:02:00.0: PREFETCH window: 0xf0000000-0xf3ffffff
    pci 0000:02:00.0: MEM window: 0xd4000000-0xd7ffffff
    pci 0000:02:00.1: CardBus bridge, secondary bus 0000:07
    pci 0000:02:00.1: IO window: 0x004800-0x0048ff
    pci 0000:02:00.1: IO window: 0x004c00-0x004cff
    pci 0000:02:00.1: PREFETCH window: 0xf4000000-0xf7ffffff
    pci 0000:02:00.1: MEM window: 0xd8000000-0xdbffffff
    pci 0000:00:1e.0: PCI bridge, secondary bus 0000:02
    pci 0000:00:1e.0: IO window: 0x4000-0x8fff
    pci 0000:00:1e.0: MEM window: 0xd0200000-0xdfffffff
    pci 0000:00:1e.0: PREFETCH window: 0xf0000000-0xf7ffffff
    pci 0000:00:1e.0: setting latency timer to 64
    ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
    PCI: setting IRQ 11 as level-triggered
    pci 0000:02:00.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11
    ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
    pci 0000:02:00.1: PCI INT B -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11
    pci_bus 0000:00: resource 0 io: [0x00-0xffff]
    pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
    pci_bus 0000:01: resource 0 io: [0x3000-0x3fff]
    pci_bus 0000:01: resource 1 mem: [0xd0100000-0xd01fffff]
    pci_bus 0000:01: resource 2 pref mem [0xe8000000-0xefffffff]
    pci_bus 0000:02: resource 0 io: [0x4000-0x8fff]
    pci_bus 0000:02: resource 1 mem: [0xd0200000-0xdfffffff]
    pci_bus 0000:02: resource 2 pref mem [0xf0000000-0xf7ffffff]
    pci_bus 0000:02: resource 3 io: [0x00-0xffff]
    pci_bus 0000:02: resource 4 mem: [0x000000-0xffffffff]
    pci_bus 0000:03: resource 0 io: [0x4000-0x40ff]
    pci_bus 0000:03: resource 1 io: [0x4400-0x44ff]
    pci_bus 0000:03: resource 2 pref mem [0xf0000000-0xf3ffffff]
    pci_bus 0000:03: resource 3 mem: [0xd4000000-0xd7ffffff]
    pci_bus 0000:07: resource 0 io: [0x4800-0x48ff]
    pci_bus 0000:07: resource 1 io: [0x4c00-0x4cff]
    pci_bus 0000:07: resource 2 pref mem [0xf4000000-0xf7ffffff]
    pci_bus 0000:07: resource 3 mem: [0xd8000000-0xdbffffff]
    NET: Registered protocol family 2
    IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
    TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
    TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
    TCP: Hash tables configured (established 131072 bind 65536)
    TCP reno registered
    NET: Registered protocol family 1
    Unpacking initramfs...
    Freeing initrd memory: 738k freed
    Simple Boot Flag at 0x35 set to 0x1
    IBM machine detected. Enabling interrupts during APM calls.
    apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
    apm: overridden by ACPI.
    Scanning for low memory corruption every 60 seconds
    audit: initializing netlink socket (disabled)
    type=2000 audit(1259350175.183:1): initialized
    highmem bounce pool size: 64 pages
    VFS: Disk quotas dquot_6.5.2
    Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
    msgmni has been set to 1746
    alg: No test for stdrng (krng)
    Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
    io scheduler noop registered
    io scheduler anticipatory registered
    io scheduler deadline registered
    io scheduler cfq registered (default)
    pci 0000:01:00.0: Boot video device
    pci 0000:02:08.0: Firmware left e100 interrupts enabled; disabling
    vesafb: framebuffer at 0xe8000000, mapped to 0xf8080000, using 4608k, total 16320k
    vesafb: mode is 1024x768x24, linelength=3072, pages=6
    vesafb: protected mode interface info at c000:5701
    vesafb: pmi: set display start = c00c5795, set palette = c00c57e1
    vesafb: pmi: ports = 3010 3016 3054 3038 303c 305c 3000 3004 30b0 30b2 30b4
    vesafb: scrolling: redraw
    vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
    Console: switching to colour frame buffer device 128x48
    fb0: VESA VGA frame buffer device
    isapnp: Scanning for PnP cards...
    isapnp: No Plug & Play device found
    Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a NS16550A
    serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a NS16550A
    00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a NS16550A
    serial 0000:00:1f.6: PCI INT B -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11
    serial 0000:00:1f.6: PCI INT B disabled
    input: Macintosh mouse button emulation as /devices/virtual/input/input0
    PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
    serio: i8042 KBD port at 0x60,0x64 irq 1
    serio: i8042 AUX port at 0x60,0x64 irq 12
    mice: PS/2 mouse device common for all mice
    cpuidle: using governor ladder
    cpuidle: using governor menu
    TCP cubic registered
    NET: Registered protocol family 17
    Using IPI No-Shortcut mode
    Switched to high resolution mode on CPU 0
    registered taskstats version 1
    Initalizing network drop monitor service
    Freeing unused kernel memory: 416k freed
    input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
    Floppy drive(s): fd0 is 1.44M
    SCSI subsystem initialized
    FDC 0 is a National Semiconductor PC87306
    libata version 3.00 loaded.
    ata_piix 0000:00:1f.1: version 2.13
    ata_piix 0000:00:1f.1: enabling device (0005 -> 0007)
    ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
    ata_piix 0000:00:1f.1: PCI INT A -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11
    ata_piix 0000:00:1f.1: setting latency timer to 64
    scsi0 : ata_piix
    scsi1 : ata_piix
    ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1860 irq 14
    ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1868 irq 15
    ata1.00: ATA-7: SAMSUNG MP0201H, YP200-06, max UDMA/100
    ata2.00: ATAPI: HL-DT-STCD-RW/DVD DRIVE GCC-4240N, 0211, max UDMA/33
    ata1.00: 39179952 sectors, multi 16: LBA48
    ata1.00: configured for UDMA/100
    ata2.00: configured for UDMA/33
    scsi 0:0:0:0: Direct-Access ATA SAMSUNG MP0201H YP20 PQ: 0 ANSI: 5
    scsi 1:0:0:0: CD-ROM HL-DT-ST RW/DVD GCC-4240N 0211 PQ: 0 ANSI: 5
    sd 0:0:0:0: [sda] 39179952 512-byte logical blocks: (20.0 GB/18.6 GiB)
    sd 0:0:0:0: [sda] Write Protect is off
    sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    sda: sda1 sda2 sda3 sda4
    sd 0:0:0:0: [sda] Attached SCSI disk
    sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
    Uniform CD-ROM driver Revision: 3.20
    sr 1:0:0:0: Attached scsi CD-ROM sr0
    EXT4-fs (sda3): INFO: recovery required on readonly filesystem
    EXT4-fs (sda3): write access will be enabled during recovery
    EXT4-fs (sda3): barriers enabled
    kjournald2 starting: pid 500, dev sda3:8, commit interval 5 seconds
    EXT4-fs (sda3): delayed allocation enabled
    EXT4-fs: file extents enabled
    EXT4-fs: mballoc enabled
    EXT4-fs (sda3): orphan cleanup on readonly fs
    EXT4-fs (sda3): ext4_orphan_cleanup: deleting unreferenced inode 212034
    EXT4-fs (sda3): 1 orphan inode deleted
    EXT4-fs (sda3): recovery complete
    EXT4-fs (sda3): mounted filesystem with ordered data mode
    rtc_cmos 00:06: RTC can wake from S4
    rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
    rtc0: alarms up to one month, y3k, 114 bytes nvram
    udev: starting version 146
    intel_rng: FWH not detected
    Linux agpgart interface v0.103
    sd 0:0:0:0: Attached scsi generic sg0 type 0
    sr 1:0:0:0: Attached scsi generic sg1 type 5
    i801_smbus 0000:00:1f.3: PCI INT B -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11
    input: PC Speaker as /devices/platform/pcspkr/input/input2
    pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    usbcore: registered new interface driver usbfs
    usbcore: registered new interface driver hub
    usbcore: registered new device driver usb
    agpgart-intel 0000:00:00.0: Intel 845G Chipset
    agpgart-intel 0000:00:00.0: AGP aperture is 64M @ 0xe0000000
    shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
    ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    cfg80211: Using static regulatory domain info
    cfg80211: Regulatory domain: US
    (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
    (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm)
    (5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
    (5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
    (5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
    (5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
    (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm)
    cfg80211: Calling CRDA for country: US
    lp: driver loaded but no devices found
    input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
    ACPI: Power Button [PWRF]
    input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input4
    uhci_hcd: USB Universal Host Controller Interface driver
    uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
    uhci_hcd 0000:00:1d.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11
    uhci_hcd 0000:00:1d.0: setting latency timer to 64
    uhci_hcd 0000:00:1d.0: UHCI Host Controller
    uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
    uhci_hcd 0000:00:1d.0: irq 11, io base 0x00001800
    usb usb1: configuration #1 chosen from 1 choice
    hub 1-0:1.0: USB hub found
    hub 1-0:1.0: 2 ports detected
    uhci_hcd 0000:00:1d.1: power state changed by ACPI to D0
    ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
    uhci_hcd 0000:00:1d.1: PCI INT B -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11
    uhci_hcd 0000:00:1d.1: setting latency timer to 64
    uhci_hcd 0000:00:1d.1: UHCI Host Controller
    uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
    uhci_hcd 0000:00:1d.1: irq 11, io base 0x00001820
    usb usb2: configuration #1 chosen from 1 choice
    hub 2-0:1.0: USB hub found
    hub 2-0:1.0: 2 ports detected
    uhci_hcd 0000:00:1d.2: PCI INT C -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11
    uhci_hcd 0000:00:1d.2: setting latency timer to 64
    uhci_hcd 0000:00:1d.2: UHCI Host Controller
    uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
    uhci_hcd 0000:00:1d.2: irq 11, io base 0x00001840
    usb usb3: configuration #1 chosen from 1 choice
    hub 3-0:1.0: USB hub found
    hub 3-0:1.0: 2 ports detected
    thermal LNXTHERM:01: registered as thermal_zone0
    ACPI: Thermal Zone [THM0] (58 C)
    ACPI: Lid Switch [LID]
    input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input5
    ACPI: Sleep Button [SLPB]
    NET: Registered protocol family 23
    usb 2-2: new full speed USB device using uhci_hcd and address 2
    iTCO_vendor_support: vendor-support=0
    iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05
    iTCO_wdt: Found a ICH3-M TCO device (Version=1, TCOBASE=0x1060)
    iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
    Marking TSC unstable due to TSC halts in idle
    ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
    processor LNXCPU:00: registered as cooling_device0
    ACPI: Processor [CPU0] (supports 8 throttling states)
    ACPI: AC Adapter [AC] (on-line)
    parport_pc 00:0b: reported by Plug and Play ACPI
    parport0: PC-style at 0x3bc, irq 7 [PCSPP,TRISTATE]
    usb 2-2: configuration #1 chosen from 4 choices
    lp0: using parport0 (interrupt-driven).
    nsc-ircc, chip->init
    nsc-ircc, Found chip at base=0x02e
    nsc-ircc, driver loaded (Dag Brattli)
    nsc_ircc_open(), can't get iobase of 0x2f8
    nsc-ircc, Found chip at base=0x02e
    nsc-ircc, driver loaded (Dag Brattli)
    nsc_ircc_open(), can't get iobase of 0x2f8
    nsc-ircc 00:0c: disabled
    input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:03/device:04/input/input6
    ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
    Non-volatile memory driver v1.3
    thinkpad_acpi: ThinkPad ACPI Extras v0.23
    thinkpad_acpi: http://ibm-acpi.sf.net/
    thinkpad_acpi: ThinkPad BIOS 1IET69WW (2.08 ), EC 1IHT20WW-1.07
    ACPI: Battery Slot [BAT0] (battery present)
    Registered led device: tpacpi::thinklight
    Registered led device: tpacpi::power
    Registered led device: tpacpi::standby
    input: ThinkPad Extra Buttons as /devices/virtual/input/input7
    ppdev: user-space parallel port driver
    yenta_cardbus 0000:02:00.0: CardBus bridge found [1014:0512]
    yenta_cardbus 0000:02:00.0: Using INTVAL to route CSC interrupts to PCI
    yenta_cardbus 0000:02:00.0: Routing CardBus interrupts to PCI
    yenta_cardbus 0000:02:00.0: TI: mfunc 0x01d21022, devctl 0x64
    e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
    e100: Copyright(c) 1999-2006 Intel Corporation
    Synaptics Touchpad, model: 1, fw: 5.9, id: 0x2c6ab1, caps: 0x884793/0x0
    serio: Synaptics pass-through port at isa0060/serio1/input0
    input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input8
    yenta_cardbus 0000:02:00.0: ISA IRQ mask 0x0438, PCI irq 11
    yenta_cardbus 0000:02:00.0: Socket status: 30000006
    yenta_cardbus 0000:02:00.0: pcmcia: parent PCI bridge I/O window: 0x4000 - 0x8fff
    pcmcia_socket pcmcia_socket0: cs: IO port probe 0x4000-0x8fff: clean.
    yenta_cardbus 0000:02:00.0: pcmcia: parent PCI bridge Memory window: 0xd0200000 - 0xdfffffff
    yenta_cardbus 0000:02:00.0: pcmcia: parent PCI bridge Memory window: 0xf0000000 - 0xf7ffffff
    [drm] Initialized drm 1.1.0 20060810
    [drm] VGACON disable radeon kernel modesetting.
    pci 0000:01:00.0: power state changed by ACPI to D0
    pci 0000:01:00.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11
    [drm] Initialized radeon 1.31.0 20080528 for 0000:01:00.0 on minor 0
    ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 11
    e100 0000:02:08.0: PCI INT A -> Link[LNKE] -> GSI 11 (level, low) -> IRQ 11
    e100 0000:02:08.0: PME# disabled
    e100: eth0: e100_probe: addr 0xd0202000, irq 11, MAC addr 00:0d:60:37:df:cb
    b43-pci-bridge 0000:02:02.0: PCI INT A -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11
    ssb: Sonics Silicon Backplane found on PCI device 0000:02:02.0
    yenta_cardbus 0000:02:00.1: CardBus bridge found [1014:0512]
    yenta_cardbus 0000:02:00.1: Using INTVAL to route CSC interrupts to PCI
    yenta_cardbus 0000:02:00.1: Routing CardBus interrupts to PCI
    yenta_cardbus 0000:02:00.1: TI: mfunc 0x01d21022, devctl 0x64
    b43-phy0: Broadcom 4318 WLAN found (core revision 9)
    phy0: Selected rate control algorithm 'minstrel'
    Broadcom 43xx driver loaded [ Features: PML, Firmware-ID: FW13 ]
    yenta_cardbus 0000:02:00.1: ISA IRQ mask 0x0438, PCI irq 11
    yenta_cardbus 0000:02:00.1: Socket status: 30000006
    yenta_cardbus 0000:02:00.1: pcmcia: parent PCI bridge I/O window: 0x4000 - 0x8fff
    pcmcia_socket pcmcia_socket1: cs: IO port probe 0x4000-0x8fff: clean.
    yenta_cardbus 0000:02:00.1: pcmcia: parent PCI bridge Memory window: 0xd0200000 - 0xdfffffff
    yenta_cardbus 0000:02:00.1: pcmcia: parent PCI bridge Memory window: 0xf0000000 - 0xf7ffffff
    fuse init (API version 7.12)
    pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: clean.
    pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
    pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean.
    pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: clean.
    pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean.
    pcmcia_socket pcmcia_socket1: cs: IO port probe 0x100-0x3af: clean.
    pcmcia_socket pcmcia_socket1: cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
    pcmcia_socket pcmcia_socket1: cs: IO port probe 0x820-0x8ff: clean.
    pcmcia_socket pcmcia_socket1: cs: IO port probe 0xc00-0xcf7: clean.
    pcmcia_socket pcmcia_socket1: cs: IO port probe 0xa00-0xaff: clean.
    psmouse serio2: ID: 10 00 64
    EXT4-fs (sda3): internal journal on sda3:8
    EXT4-fs (sda4): barriers enabled
    kjournald2 starting: pid 2051, dev sda4:8, commit interval 5 seconds
    EXT4-fs (sda4): internal journal on sda4:8
    EXT4-fs (sda4): delayed allocation enabled
    EXT4-fs: file extents enabled
    EXT4-fs: mballoc enabled
    EXT4-fs (sda4): mounted filesystem with ordered data mode
    Adding 265064k swap on /dev/sda2. Priority:-1 extents:1 across:265064k
    usb 2-2: USB disconnect, address 2
    IBM TrackPoint firmware: 0x0e, buttons: 3/3
    input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input9
    Clocksource tsc unstable (delta = -78033180 ns)
    oss_ich 0000:00:1f.5: PCI INT B -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11
    usbcore: registered new interface driver oss_usb
    ttyS1: LSR safety check engaged!
    NET: Registered protocol family 10
    lo: Disabled Privacy Extensions
    ADDRCONF(NETDEV_UP): eth0: link is not ready
    agpgart-intel 0000:00:00.0: AGP 2.0 bridge
    agpgart-intel 0000:00:00.0: putting AGP V2 device into 4x mode
    pci 0000:01:00.0: putting AGP V2 device into 4x mode
    [drm] Setting GART location based on new memory map
    [drm] Loading R100 Microcode
    [drm] writeback test succeeded in 1 usecs
    b43 ssb0:0: firmware: requesting b43/ucode5.fw
    b43 ssb0:0: firmware: requesting b43/pcm5.fw
    b43 ssb0:0: firmware: requesting b43/b0g0initvals5.fw
    b43 ssb0:0: firmware: requesting b43/b0g0bsinitvals5.fw
    b43-phy0: Loading firmware version 410.2160 (2007-05-26 15:32:10)
    Registered led device: b43-phy0::tx
    Registered led device: b43-phy0::rx
    Registered led device: b43-phy0::radio
    ADDRCONF(NETDEV_UP): wlan0: link is not ready
    wlan0: authenticate with AP 00:1e:e5:79:4e:41
    wlan0: authenticated
    wlan0: associate with AP 00:1e:e5:79:4e:41
    wlan0: RX AssocResp from 00:1e:e5:79:4e:41 (capab=0x11 status=0 aid=1)
    wlan0: associated
    ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
    wlan0: no IPv6 routers present
    usb 2-2: new full speed USB device using uhci_hcd and address 3
    usb 2-2: configuration #1 chosen from 4 choices
    Consoledump from an openGL game:
    [nick@myhost nick]# tremulous
    tremulous 1.1.0 linux-x86 Mar 17 2009
    ----- FS_Startup -----
    Current search path:
    /root/.tremulous/base
    /opt/tremulous/base/vms-1.1.0.pk3 (4 files)
    /opt/tremulous/base/map-uncreation-1.1.0.pk3 (110 files)
    /opt/tremulous/base/map-tremor-1.1.0.pk3 (45 files)
    /opt/tremulous/base/map-transit-1.1.0.pk3 (135 files)
    /opt/tremulous/base/map-niveus-1.1.0.pk3 (134 files)
    /opt/tremulous/base/map-nexus6-1.1.0.pk3 (151 files)
    /opt/tremulous/base/map-karith-1.1.0.pk3 (118 files)
    /opt/tremulous/base/map-atcs-1.1.0.pk3 (87 files)
    /opt/tremulous/base/map-arachnid2-1.1.0.pk3 (67 files)
    /opt/tremulous/base/data-1.1.0.pk3 (1229 files)
    /opt/tremulous/base
    2080 files in pk3 files
    execing default.cfg
    couldn't exec autogen.cfg
    couldn't exec autoexec.cfg
    Hunk_Clear: reset the hunk ok
    ----- Client Initialization -----
    ----- Initializing Renderer ----
    ----- Client Initialization Complete -----
    ----- R_Init -----
    ------- Input Initialization -------
    Joystick is not active.
    ...loading libGL.so.1:
    Calling SDL_Init(SDL_INIT_VIDEO)...
    SDL_Init(SDL_INIT_VIDEO) passed.
    Initializing OpenGL display
    ...setting mode 3: 640 480
    Using 8/8/8 Color bits, 24 depth, 8 stencil display.
    GL_RENDERER: Mesa DRI R100 (RV200 4C57) 20090101 AGP 4x x86/MMX/SSE2 TCL
    Initializing OpenGL extensions
    ...GL_S3_s3tc not found
    ...ignoring GL_EXT_texture_env_add
    ...using GL_ARB_multitexture
    ...using GL_EXT_compiled_vertex_array
    GL_VENDOR: Tungsten Graphics, Inc.
    GL_RENDERER: Mesa DRI R100 (RV200 4C57) 20090101 AGP 4x x86/MMX/SSE2 TCL
    GL_VERSION: 1.3 Mesa 7.6
    GL_EXTENSIONS: GL_ARB_draw_buffers GL_ARB_imaging GL_ARB_multisample GL_ARB_multitexture GL_ARB_texture_border_clamp GL_ARB_texture_compression GL_ARB_texture_cube_map GL_ARB_texture_env_add GL_ARB_texture_env_combine GL_ARB_texture_env_crossbar GL_ARB_texture_env_dot3 GL_ARB_texture_mirrored_repeat GL_ARB_texture_rectangle GL_ARB_transpose_matrix GL_ARB_vertex_buffer_object GL_ARB_window_pos GL_EXT_abgr GL_EXT_bgra GL_EXT_blend_color GL_EXT_blend_logic_op GL_EXT_blend_minmax GL_EXT_blend_subtract GL_EXT_compiled_vertex_array GL_EXT_convolution GL_EXT_copy_texture GL_EXT_draw_range_elements GL_EXT_fog_coord GL_EXT_histogram GL_EXT_multi_draw_arrays GL_EXT_packed_depth_stencil GL_EXT_packed_pixels GL_EXT_polygon_offset GL_EXT_rescale_normal GL_EXT_secondary_color GL_EXT_separate_specular_color GL_EXT_stencil_wrap GL_EXT_subtexture GL_EXT_texture GL_EXT_texture3D GL_EXT_texture_edge_clamp GL_EXT_texture_env_add GL_EXT_texture_env_combine GL_EXT_texture_env_dot3 GL_EXT_texture_filter_anisotropic GL_EXT_texture_lod_bias GL_EXT_texture_mirror_clamp GL_EXT_texture_object GL_EXT_texture_rectangle GL_EXT_vertex_array GL_APPLE_packed_pixels GL_ATI_texture_env_combine3 GL_ATI_texture_mirror_once GL_IBM_multimode_draw_arrays GL_IBM_rasterpos_clip GL_IBM_texture_mirrored_repeat GL_MESA_ycbcr_texture GL_MESA_window_pos GL_NV_blend_square GL_NV_light_max_exponent GL_NV_texture_rectangle GL_NV_texgen_reflection GL_OES_read_format GL_SGI_color_matrix GL_SGI_color_table GL_SGIS_generate_mipmap GL_SGIS_texture_border_clamp GL_SGIS_texture_edge_clamp GL_SGIS_texture_lod GL_SUN_multi_draw_arrays
    GL_MAX_TEXTURE_SIZE: 2048
    GL_MAX_ACTIVE_TEXTURES_ARB: 3
    PIXELFORMAT: color(24-bits) Z(24-bit) stencil(8-bits)
    MODE: 3, 640 x 480 fullscreen hz:N/A
    GAMMA: hardware w/ 0 overbright bits
    CPU:
    rendering primitives: single glDrawElements
    texturemode: GL_LINEAR_MIPMAP_LINEAR
    picmip: 0
    texture bits: 0
    multitexture: enabled
    compiled vertex arrays: enabled
    texenv add: disabled
    compressed textures: disabled
    Initializing Shaders
    ...loading 'scripts/uncreation.shader'
    ...loading 'scripts/q3map2_tremor.shader'
    ...loading 'scripts/tremor.shader'
    ...loading 'scripts/transit.shader'
    ...loading 'scripts/niveus.shader'
    ...loading 'scripts/nexus6.shader'
    ...loading 'scripts/karith.shader'
    ...loading 'scripts/atcs.shader'
    ...loading 'scripts/arachnid2.shader'
    ...loading 'scripts/jetpack.shader'
    ...loading 'scripts/core.shader'
    ...loading 'scripts/flame.shader'
    ...loading 'scripts/misc.shader'
    ...loading 'scripts/common-trem.shader'
    ...loading 'scripts/titan.shader'
    ...loading 'scripts/water.shader'
    ...loading 'scripts/displays.shader'
    ...loading 'scripts/plant_life.shader'
    ...loading 'scripts/stasis.shader'
    ...loading 'scripts/booster.shader'
    ...loading 'scripts/eggpod.shader'
    ...loading 'scripts/medistat.shader'
    ...loading 'scripts/mgturret.shader'
    ...loading 'scripts/reactor.shader'
    ...loading 'scripts/telenode.shader'
    ...loading 'scripts/trapper.shader'
    ...loading 'scripts/overmind.shader'
    ...loading 'scripts/tesla.shader'
    ...loading 'scripts/dcc.shader'
    ...loading 'scripts/hive.shader'
    ...loading 'scripts/level2.shader'
    ...loading 'scripts/human.shader'
    ...loading 'scripts/null.shader'
    ...loading 'scripts/weapons.shader'
    ...loading 'scripts/conkit.shader'
    ...loading 'scripts/advckit.shader'
    ...loading 'scripts/psaw.shader'
    ...loading 'scripts/mdriver.shader'
    ...loading 'scripts/flamer.shader'
    ...loading 'scripts/crosshairs.shader'
    ...loading 'scripts/grenade.shader'
    ...loading 'scripts/splash.shader'
    ...loading 'scripts/marks.shader'
    ...loading 'scripts/sprites.shader'
    ...loading 'scripts/muzzleflashes.shader'
    ----- finished R_Init -----
    ------ Initializing Sound ------
    Initializing SDL audio driver...
    ALSA lib confmisc.c:768:(parse_card) cannot find card '0'
    ALSA lib conf.c:4154:(_snd_config_evaluate) function snd_func_card_driver returned error: No such file or directory
    ALSA lib confmisc.c:392:(snd_func_concat) error evaluating strings
    ALSA lib conf.c:4154:(_snd_config_evaluate) function snd_func_concat returned error: No such file or directory
    ALSA lib confmisc.c:1251:(snd_func_refer) error evaluating name
    ALSA lib conf.c:4154:(_snd_config_evaluate) function snd_func_refer returned error: No such file or directory
    ALSA lib conf.c:4633:(snd_config_expand) Evaluate error: No such file or directory
    ALSA lib pcm.c:2211:(snd_pcm_open_noupdate) Unknown PCM default
    SDL audio driver is "dsp".
    SDL_AudioSpec:
    Format: AUDIO_S16LSB
    Freq: 22050
    Samples: 512
    Channels: 2
    Starting SDL audio callback...
    SDL audio initialized.
    ----- Sound Info -----
    1 stereo
    16384 samples
    16 samplebits
    1 submission_chunk
    22050 speed
    0xa4241f8 dma buffer
    No background file.
    Sound intialization successful.
    Sound memory manager started
    Loading vm file vm/ui.qvm...
    ...which has vmMagic VM_MAGIC_VER2
    Loading 1075 jump table targets
    VM file ui compiled to 786313 bytes of code
    ui loaded in 4596672 bytes on the hunk
    UI menu load time = 705 milli seconds
    UI menu load time = 55 milli seconds
    UI menu load time = 51 milli seconds
    --- Common Initialization Complete ---
    Opening IP socket: localhost:30720
    Hostname: myhost.localdomain
    Alias: myhost
    IP: 127.0.0.1
    Started tty console (use +set ttycon 0 to disable)
    *********************************WARN_ONCE*********************************
    File radeon_tcl.c function radeon_run_tcl_render line 499
    Rendering was 734 commands larger than predicted size. We might overflow command buffer.
    ----- CL_Shutdown -----
    Closing SDL audio device...
    SDL audio device shut down.
    RE_Shutdown( 1 )
    ----- CL_Shutdown -----
    Shutdown tty console
    [nick@myhost nick]#
    Display all 3035 possibilities? (y or n)

    radionecrotic wrote:
    Has this always been the case for you or did you update recently and it started happening?  There appears to be some sort of conflict with some machines and new changes to the kernel to allow quicker mode setting.  See http://bbs.archlinux.org/viewtopic.php? … 47#p659347.  I had to add !radeon to my MODULES list in /etc/rc.conf to get X to even work at all.  I don't run anything that uses OpenGL so I don't know if it'll address your issue.
    You may also want to take a look at http://bbs.archlinux.org/viewtopic.php? … 20#p662920 and add intel_agp radeon (that's two modules, in that order) to your MODULES list.
    Well, I was having the graphical corruption issue in that first thread until I added the nomodeset boot flag. As for the modesetting, I think it directly conflicts with my boot flag, and without it, I get corruption. =/

  • How do I contact corporate about Verizon Wireless store scamming me?

    Hi all,
    On September 8th, I signed up for a MiFi 2-year contract that came along with a free Jetpack device. I specifically told the salesman to tell me about all of the charges in advance, so I wouldn't be surprised when the bill came. He told me it was $80 per month for the plan, plus $18 for tax on the device. Nothing else was mentioned.
    I then sign up on the Verizon website and download my Equipment Receipt and my 1st Bill Estimate. Boy was I shocked! They were charging me $260.66, for what I'm still not sure, because NOTHING ADDED UP. It would seem that Verizon cannot even perform simple addition. I also noticed that the receipt said the following (I'll paraphrase):
    1. I had 14 days to get out of this mess.
    2. They expect me to pay a restocking fee of $35 just for returning their "free" device.
    3. I was only entitled to a credit for the activation fee if I cancelled my service within 3 days of signing up.
    This was a red flag to me, having wasted my valuable time previously with other irresponsible credit card companies. So I went into the same Verizon Wireless store where I signed up and told them I wanted to return the device and cancel my plan on September 11th, which would entitle me, according to them, to be credited back for the activation fee; the estimated bill says this amount is $35.
    They said they would charge me the $35 restocking fee. I told them I thought that was unfair for the following reasons:
    1. The device was free;
    2. I never agreed to that when I signed up. They just printed it on the receipt after I signed up. The next thing you know, they'll tell me I owe them my next child. How can they just make stuff up after the fact?
    So I refused to pay and told them (the manager was there along with 2 other salespeople) I was returning the device. They refused to give me a return receipt, so I left the device there and walked out, filming the whole thing (just me and the device).
    In response, the manager said she was going to charge me for everything as if I never came into the store and returned the device.
    Now it's September 13th and I received a call from another salesperson at the same store (on Topanga Blvd. in Woodland Hills, CA) saying I left my equipment there and would I like to come in and pick it up or would I like it mailed to me. I explained the situation to him and he STILL INSISTED ON MAILING BACK THE DEVICE TO ME, unless I agreed to come into the store and let them process the return/cancellation the way they wanted, which would mean (according to this salesperson) that not only would they charge me the $35 restocking fee, BUT THEY WOULD ALSO CHARGE ME ANOTHER $35 AS IF I JUST RETURNED THE DEVICE TODAY.
    I asked for his supervisor and was told she's not there today. I then asked for the contact info for someone higher up in the chain of command, and was refused.
    This is such a scam! I feel sure that someone higher up would understand that they will lose me (and as many people as I can tell this to) as a potential customer over chump change, which is just silly.
    I really don't know if the problem is just this store or all of Verizon, but if I can't get this resolved in the next hour or so through this forum (hello, any Verizon reps out there?) I'll just make sure they can never take any more of my money by never considering using Verizon again, both for personal use and at work (I'm in IT and make those types of decisions at work), and convincing as many people as I can not to use them also.
    The ball's in your court, Verizon. What will you do?
    (receipts attached for your reference)
    >>Attachments removed as they contained personal information<<
    Message was edited by: Verizon Moderator

        Thanks for reaching out to us via the community forum, zeroimpedance. We did have to remove the receipts that you attached since they contained your personal information.
    I will reach out to you via Direct Message in order to get more details from you.
    I'm pretty sure the 1st bill had the charges that include this month as well as a month in advance as well as the activation fee.
    I would recommend going back to the store in order to ensure the service is canceled if that is what you desire. I also recommend you getting a receipt that indicates the service was canceled. Of course, we don't want you to leave so I would prefer to help with the understanding of the bill.
    TamaraH_VZW
    Follow us on Twitter @VZWSupport

  • Had mobile hot spot with 5g and then they moved it into my share paln

    What a rip off.  We went in to upgrade two phones..$400 and they told me I should change my family plan to a new share everything plan & it would be cheaper.  What a scam. Now I get 2 gig data to share with a mobile hot spot & 2 data phones.  The old plan had 5 g on the mobile hotspot FOR $50/MO.
    THEY DID NOT INFORM ME THAT THe HOT SPOT WOULD HAVE TO SHARE DATA WITH THE REST OF THE PHONES. Now , on day after it's too late to return the upgrade phones & go back to my old plan I GET A WARNING THAT I'M OVER THE DATA ALLOWANCE.. Customer service did nothing but charge me $ 10 more a month until the contract runs out on the hot spot and then I tell them to put it where the, take this &  you know.... the thing never worked very well in the first place. I think they should have giving me some free data for the next few month a least.  Do you think they explain the so called up grades well????

    When did the plan go into affect has it been more than 24 hours?

  • Problem joining Verizon Jetpack MiFi network

    Since I upgraded my MacBook Pro to 10.9.4, I can't join my Verizon Jetpack MiFi network.  This is a mobile hotspot device.  I can connect to it from my Android phone with no problem, and I had no problems connecting to it prior to the Mac OS upgrade.  Any ideas?

    Are you trying to do this using Wi-Fi?
    Troubleshooting Wi-Fi connection issues - MacBook Air (Mid 2013)
    Troubleshooting Wi-Fi issues in OS X
    Wireless Connection Problems - Fix
    Wireless Connection Problems - Fix (2)
    Wireless Connection Problems - Fix (3)
    Wireless Connection Problems - Fix (4)
    Wireless Diagnostics - About
    Also try turning off Bluetooth

Maybe you are looking for

  • PDF links work in Acrobat - don't work in Reader

    Acrobat version: 9.5.1 (latest as of this writing) Reader version: 10.1.3 (latest as of this writing) I createa  Word doc that has links to UNC shares that look like this: "\\server\share\file.exe" I convert the file to a PDF through Acrobat File ->

  • Bank Reco

    Hello all, Citi Bank has provided the BAI file format of bank statement and i have configured for uoploading this . WHen i import the file to the SAP the system picks up the GL A/c with EXT transaction types with Debit -credit key but also giving he

  • Creating interactive PDF, WORD or EXCEL

    Hi experts I have to attach an editable file (interactive PDF, word or excel) to an email. Is there a way to print a smartform into an interactive PDF, word or excel? Or creating a word/excel file on another way, without printing-form. If there is a

  • Default or Static Item in Layout within ListView

    I am trying to have a static item show up within the layouttemplate of my listview. Anyone can show me some examples of this? I have a lv_serviceLocations_DataBound event that fires the ListView to be visible, but I am unsure of how to take the data

  • Disinstall previous versions of Photoshop Elements?

    Starting with Photoshop Elements 8 I always upgraded the software to now PE 11 (following the instructions, I never disinstalled the previous versions). When running, the program (both, organizer and editor) is incredibely slow. Looking at the comput