Mobile layout : a stange Issue when making elements full width

I started to play around with the mobile features in adobe muse but I seem to be getting some strange issue.
Not Stretching the elements to full width - all fine
Stretched to full width and I get this added "padding" not sure why
I was trying to re-create this:
http://blogs.adobe.com/muse/2012/12/11/create-super-widgets-in-muse-the-expanding-mobile-m enu/
Thanks
Daz

Hi Daz, This might be a bug in our Preview Mode. Do you see the same behavior on the actual phone? You can publish to a free trial site, by clicking Publish to test it on your phone.
Let me know.
Thanks
Noam

Similar Messages

Small "freeze" and sound issue when taking a full screenshot

Hello,
This is a strange one, and I've not been using Macs properly for very long, so bear with me
It only happens when I use cmdshift3 to take a full screenshot, the other shortcuts for taking them are fine, I do get a similar issue when using Grab and it, too, only occurs on the full screen capture. What happens is, the sound clip of the camera noise will begin to play, stop, it goes a little distorted then the windows on screen will freeze up, the mouse will still move, and it stays like that for around 5 seconds until the file is saved to the desktop and all goes back to normal again. I'd like to reiterate that it only does this when i do a full screenshot, and the smaller one with the crosshairs and the individual windows is perfectly fine.
I tried searching on google, on the main support section and the forums and nothing has come up that's been helpful. I've had a look in the system logs, and at the time's I take the screenshot, the system log reports the following:
Sep 24 14:04:09 xxxxxxxx-computer kernel[0]: IOAudioStream[0x4db4a00]::clipIfNecessary() - Error: attempting to clip to a position more than one buffer ahead of last clip position (2,728)->(3,7bd).
Sep 24 14:04:09 xxxxxxxx-computer kernel[0]: IOAudioStream[0x4db4a00]::clipIfNecessary() - adjusting clipped position to (3,728)
Sep 24 14:04:32 xxxxxxxx-computer kernel[0]: IOAudioStream[0x4db4a00]::clipIfNecessary() - Error: attempting to clip to a position more than one buffer ahead of last clip position (2,71a)->(3,7ec).
Sep 24 14:04:32 xxxxxxxx-computer kernel[0]: IOAudioStream[0x4db4a00]::clipIfNecessary() - adjusting clipped position to (3,71a)
Sep 24 14:04:33 xxxxxxxx-computer kernel[0]: IOAudioStream[0x4db4a00]::clipIfNecessary() - Error: attempting to clip to a position more than one buffer ahead of last clip position (4,73a)->(5,7c8).
Sep 24 14:04:33 xxxxxxxx-computer kernel[0]: IOAudioStream[0x4db4a00]::clipIfNecessary() - adjusting clipped position to (5,73a)
I know from that it's referring to my soundcard and there's a memory reference, but that's about as much as I can figure out.
It might not seem a big issue as the other methods are ok, but if it turns out to be something much deeper I'd like to try and fix it now before it becomes a problem.
Does anyone have any ideas?
Thanks,
Claire

Bingo! EXACT same problem here! It seems to me its a software bug.. ??

IPhoto issue when making albums

While trying to make an album with blurb I encountered an issue with iPhoto. While tusing the share function to create an album (Full of the pictures I want to use in the blurb album) it 'quit unexpectedly due to core media plug in'. Do I have to reinstall? I seem to remeber seeing a pop up that told me to do this but it seems very radical. I did export all my pictures to my documents file in finder (I have not yet managed to buy an external hard drive and the one I have for my PC is blocked through bit-locker). Help please (very new mac user still struggling with iphoto!)

I'm not clear on your problem
How does the "share" button enter into this?
Read the user tip on how to access your files in iPhoto for details on the supported way to acdess the photos
If you ae having a crash post the first 100 or so lines of the cash repport here
And when you have the same problem in two or more different applications it is likely that you have a system evel problem
LN

Spacing Issues when making PDF of HTML file

I am making changes to a website and need to convert an html file into a pdf file (for easy printability on the website). When I try to create the PDF file (in Acrobat) by opening the HTML file, it does not keep the same formating. Anyplace there is a picture on right hand side of the page, the wording to the left of the picture drops to below the picture and I need it to stay next to the picture.
Any suggestions? Thanks

You might also have to change the paper size before you print. Keep in mind that HTML has a floating format and typically looks different on different machines.

Excel 2007 Formatting Issues When Making PDF

Running Excel 2007 on XP Pro. When I make a pdf file from an existing Excel file in Excel 2007 (originally created in Excel 2000), a lot of the formatting changes. Cells that were aligned to the center are now aligned to the top or bottom with no rhyme or reason.
I would hate to have to go through and fix all the alignment problems in Excel 2007.
Any suggestions or has anybody else had this problem?

Not so much Excel (or, at least not so much that I remember) but I've read a
LOT of messages about problems with Word'07
You might want to check and make sure you have all MS Office updates installed, to fix any known bugs... plus make sure your version of Acrobat is fully up to date
Acrobat Updates Here - Updates are NOT cumulative, so install in number order
http://www.adobe.com/support/downloads/product.jsp?product=1&platform=Windows

Categorizing issues when moving Elements 10 from one PC running XP to Windows 7

I purchased a new desktop that is Windows 7 based and had to reinstall Elements from XP. I saved all my 13,000 photos to an external drive and then downloaded them onto my new desktop with Elements 10. I noticed that the photos were NOT categorized. How do I correct this?

Thank you for this information. I am currently performing a full backup of my photos (13,000 photos) to an external drive from my old PC (old PC is about 5 years old). So far it has been running about 24 hours. Do you have any idea how long it should take for this many photos to be backed up on a PC that is this old? Any guidelines would be appreciated…..
Pete

Strange alignment issue when making composition...

I have altered the blank composition and have placed the target below the trigger, but no matter what I do, they won't align on their left/right sides. It snaps to what I am guessing it considers the edge, but as shown in the image below, they aren't aligned. I also check the X coordinates of each piece and it says they are the same. Both objects have a fill but no stroke. I don't have this problem with regular shapes, so I have no idea whats going on. Any ideas? Is this just a bug? The x and y valuse in the image are as Muse reports them.

Please send a copy of the file into [email protected] and link to the forum thread here. -j

Muse mobile site doesn't display full width

The mobile version of my site doesn't display full width. It doesn't scale to fit the mobile screen as the set up width in Muse.
I found a tip talking about add "viewport" code to muse site. When I insert the code to html window, it give me a box said "unable to generate a thumbnail"
If add the view port code is the solution, how do I add this code to the <head> tag on muse?
If not, what's the solution for this situation?

One problem where this occurs is that there could be some object (s) outside the layout page size.

Re: SAP ITS Mobile - Layout Styling Issue

Hi ,
I'm facing the following issue in ITS Mobile service. where the white spaces between the form elements are not reduced though ~DYNPRO_COMPRESSION is set to 1.
The solution i nthe following thread SAP ITS Mobile - Layout Styling Issue works fine for custom programs, but my internet service makes use of standard programs , so it is not advisable to edit the standard programs. And also tried to constrict the gaps by using a custom css-stylesheet, but all the efforts in vain.
Kindly help,
Regards,
Avinash
BRANCH - Branch to a new thread as was posted to an old and answered thread. Link and ref the previous thread.
Message was edited by: Oisin ONidh ITS SCN Moderator

thanks for the reply, we are using Internet Explorer for opening the URL.
I have another issues like
1. getting the scanned EPC value in the cursor position on the screen if datawedge application running in background but as soon as the EPC value appears int he field, the screen turns to "Page not found error" ( though in screen sequence next screen available) in short the problem is after getting EPC value in cursor field, without waiting for user/system action the page goes out.
2. I want to write the EPC value on the RFID tag using the handheld but its not happening
3. does the RFID handheld returns any value when EPC written succesfully on the tag ( such as tag written successfully )
your inputs will be really useful for me.
Thanks,
Neha

Is anyone else having Config error 16 issue when trying to start PSE 12 or Premier Elements after Mac upgrade to Yosemite 10.10 on iMac

Is anyone else having Config error 16 issue when trying to start PSE 12 or Premier Elements 12 after the Mac upgrade to OS X Yosemite 10.10 on iMac. I have had a number of issues with software and things after upgrading to OS X Yosemite 10.10 and even 10.10.1. I have uninstalled and reinstalled both PSE 12 and Premier Elements 12 a number of times and everything goes fine until its ready to launch and then you get an error message. Numerous uninstalled and reinstalls don't removing the problem. Strangely enough PSE 11 still appears to boot up and I never owned Premier Elements 11 so I don't know if it will start. I thought with Apple dropping its Apeture software and greater integration of iPhoto and Apeture files into Lightroom 5.7 all would be harmonious between these two players. Im not sure where Adobe wants us to go it recently removed the plugin to allow you to update files from LR to Adobe Revel, whats up with that. I now own two version of Adobe software that no longer work with my Mac and now way of uploading pictures from Lightroom to Revel. Needless to say I am pretty reluctant to sign on to a subscription of Creative Cloud with long term financial obligations when I can't even get my current Adobe software to work independently much less integrate with Lightroom. Frustrated with it all!

Get rid of 'put disks to sleep when possible' and you may see a dramatic improvement (not necessarily a cure).
That specific problem is a multiple-Processor (including graphics processor) problem, where one of the processors lost track of whether it should be responding to interrupts. You may have a Hardware problem.

Minor Layout Issue when Printing Invoices in Chrome (v20.0.1132.47)

This is a relatively minor issue in the big scheme of things but a client of ours has reported a layout issue when bulk printing invoices in Chrome. It could be default browser behaviour which BC has no control over but I thought I’d submit it anyway.
It occurs when you’re viewing the default Order Report (http://www.yourdomain.com/AdminConsole/#!/CRM/OrderList.aspx) in the BC v3 interface and you want to print invoices in bulk (see screenshot below).
When you print invoices in bulk in Chrome they print on overlapping pages, as opposed to Firefox where each invoice will print on a separate page, which makes management much easier for our client. I’ve tried tinkering with the print settings inside of Chrome but I can seem to change it.
Does anyone know a way around this or are we dealing with default browser behavior that is out of our hands?
Cheers,
Matt
[email protected]

Could someone assist please?
I am having a similar problem.
thanks

TS4079 Siri used to work fine when making mobile calls in Ecuador until yesterday, when the administration of Ecuador added an aditional number in all mobile numbers existing in Ecuador. Since then Siri is unable to make any mobile calls with any new numb

Siri used to work fine when making mobile calls in Ecuador until yesterday, when the administration of Ecuador added an aditional number in all mobile numbers existing in Ecuador. Since then Siri is unable to make any mobile calls with any new number.Help
I`ve tried restarting, rebooting, nothing works.
The interesting thing is that SIRI can call to previous mobile numbers (without the new digit) obviously not connecting , and, can call to any other numbers as an office or home number. So the problem is the new digit in the mobile number

Ecuador has added an extra digit to mobile phone numbers but apple wont accept 10 digit phone numbers so we cant use facetime or apple IM or verify our new phone numbers. ( and Siri won't work either!) I have contacted apple support online but can't request a call back as the apple system says our new phone numbers are invalid. I am going to phone them tomorrow and you should complain too at http://www.apple.com/support/contact/. . The more people that bring this to their attention the faster it will get fixed

I hve unlocked iphone and got walmart family mobile. I was issued a phone number initially with phone and then I had them change it. Now when I send texts caller id people see is the original phone number, and when I call it is the new number.

I have unlocked iphone and got walmart family mobile. I was issued a phone number initially then asked for a different one. Now when I send text messages, they show up the original number, but when I make phone calls, the id shows up the new number, I can recieve text messages to both numbers. If you try to call the first number it says it is not a working number. On my phone, if I go under "about" it says "my phone number" and it says the second number, under settings, and messaging, it says that I send and recieve messages from the original one. T-mobile, has no idea why this is happening and has tried everything to fix it

This is for iMessages only, not for text messages as in SMS/MMS.
Settings > Messages > Send & Receive > Apple ID.
Select your Apple ID and at the menu window that appears, select Sign Out.
Turn iMessage off at Settings > Messages > iMessage.
Then follow these instructions.
You can remove an iPhone from your support profile by following these steps.
Step 1: Click on this link to open the login window of your support profile.
Step 2: Log into the website using your Apple ID – same as your iTunes login.
Step 3: Click on the button ‘Edit products’ and select the iPhone that you want to remove from the list.
Step 4: Click on the arrow behind the product, and then click on the button ‘Unregister’ to delete the iPhone from your support profile.
After you unregister your iPhone, on your iPhone go to Settings > Messages > iMessage and turn iMessage on.
Go to Settings < Messages > Send & Receive > Apple ID. Sign back in with your Apple ID.
This should re-register your iPhone with your Apple ID with iMessage with the new phone number only.

YouTube Video Issue - when I fill the wrapper it left aligns on mobile & tablets

Example: http://www.hollywoodunderground.com
When I set the width of the video to 1000px, it looks fine in browsers, but when you look at it on a mobile device it left aligns the whole page. My only fix so far has been to change it to 990px but obviously that doesn't look quite as good. I have the iframe inside a video DIV with the dimensions set in HTML, would CSS dimensions be better or is this something with YouTube?

In the following example, I have embedded a YT video inside a FluidGrid Layout (% width). The video and layout respond to device width.
http://alt-web.com/FluidGrid/Fluid.html
The relevant CSS code for video-container is this:
.video-container {
    position: relative;
    padding-bottom: 56.25%;
    padding-top: 30px;
    height: 0;
    overflow: hidden;
.video-container iframe,
.video-container object,
.video-container embed {
    position: absolute;
    top: 0;
    left: 0;
    width: 100%;
    height: 100%;
The HTML:
<div class="video-container">

<iframe width="560" height="315" src="http://www.youtube.com/embed/your-code-here" frameborder="0" allowfullscreen></iframe>
</div>
Nancy O.

When making a new playlist, the screen layout has changed, the playlist header is now on the left instead of the right, this does not allow me to drag the songs onto the playlist, how do I reset?

When Making a new play list, the play list was on the right of the screen and this allowed you to drag your music onto the playlist, my setup has changed to the left of the screen which does not allow you to drag your music across, how do I reset?

In the top corner of iTunes is a small icon with a down arrow, click on that and choose 'show menu bar'.
Then on the view menu which now appears choose 'show sidebar'

Mobile layout : a stange Issue when making elements full width

Similar Messages

Maybe you are looking for