Mobile map viewing system

Hello
I'm a student, I have a project, My project is mobile map viewing syatem. But, I dont know how to start.Please, i ask some help, i'm in big trouble.
thanks in advance.

But, I dont know how to
start.Please, i ask some help, i'm in big trouble.
thanks in advance.
HERE

Similar Messages

I have a problem with FP 13 in that a Council website with a regional map viewer will not now open.

I have a problem with FP 13 in that a Council website with a regional map viewer will not now open. The site was designed around FP 10 and the link they have to download FP 10 nowalso directs to FP 13. I followed the "How to revert to FP 11.7 (Chris Campbell Oct 2013) along with the uninstall instructions link and now have both zip FP 10.3 and zip 11.7 in my downloads. I attempted to run FP 11.7, the "winax" file for IE after unzipping it but I am blocked bya window that says I cannot do this and must install FP 13. The only choice in this window, other than downloading is QUIT. What is the best approach now. The website is Auckland Council and the window concerned is "GIS Viewer". neither Chrome or IE will open it.

Hi 34wiki,
There is only one uninstaller for Windows that will uninstall both 32- and 64-bit versions of the Flash Player. At one point there were two separate installers (one for 32-bit OS and another for 64-bit OS), but that has not been the case for a long time. Based on the error, it's possible you may using an older version of the uninstaller (to find out the version of the uninstaller, right-click on the file, select properties, then the 'details' tab). The latest version is always posted to this link, and will work on both 32- and 64-bit operating systems. If you get the same error using this uninstaller, please post the contents at the end of the FlashInstall.log file, that show the uninstall attempt. Since you have a 64-bit OS, there will be two files at the following locations:
32-bit: C:\Windows\System32\Macromed\Flash
64-bit: C:\Windows\SysWOW64\Macromed\Flash
Maria

Map View Analyses in OBIEE 11g

Hi friends,
Im in the process of using map view in my analysis. For that they asked to put the following thing in the instanceconfig.xml file after *</Logging>* tag
<SpatialMaps>
<ColocatedOracleMapViewerContextPath>/mapviewer/</Colocated
OracleMapViewerContextPath>
<RemoteOracleMapViewerAbsoluteURL></RemoteOracleMapViewerAb
soluteURL>
<LayerDataLayout><MaxRecords>600</MaxRecords></LayerDataLay
out>
</SpatialMaps>Soon after making this change i saved the instanceconfig.xml file and after that they asked to restart the BIPresentation services(via)EM. But the Restart isn't successful as the Presentation Service is going down.
But if i removed the above code in the xml file, and if i restarted the services means then the BI presentation services is becoming up. But if i used that code in the xml file means the BI presentation service is going down.
I couldnt able to predict the reason behind it. Since for performing the map view in my analyses i need to add the above coding. But the Presentation servers is going down for that.
Thanks
All izz Well
GTA

Hi Deepak,
This is the full xml tag in my instanceconfig.xml, kindly check in what is missing, then too the same problem.
<?xml version="1.0" encoding="UTF-8" standalone="no"?>

<WebConfig xmlns="oracle.bi.presentation.services/config/v1.1">
   <ServerInstance>
      <CatalogPath>C:\NEW8\instances\instance4\bifoundation\OracleBIPresentationServicesComponent\coreapplication_obips1\catalog\GCBC</CatalogPath>
      <DSN>coreapplication_OH1347659640</DSN>
      <SpatialMaps>
<LayerDataLayout>
<MaxRecords>1000</MaxRecords>
</LayerDataLayout>
</SpatialMaps>
      <LightWriteback>true</LightWriteback>
      <Logging>
         <Writers>
            <Writer implementation="FileLogWriter" name="Global File Logger" writerClassId="1" dir="{%ORACLE_BIPS_INSTANCE_LOGDIR%}" filePrefix="sawlog" maxFileSizeKb="10000" filesN="10" fmtName="ODL-Text"/>
            <Writer implementation="CoutWriter" name="Console Logger" writerClassId="2" maxFileSizeKb="10000"/>
            <Writer implementation="EventLogWriter" name="System Event Logger" writerClassId="3" maxFileSizeKb="10000"/>
            
        <Writer implementation="FileLogWriter" name="Webcat Upgrade Logger" disableCentralControl="true" writerClassId="5" dir="{%ORACLE_BIPS_INSTANCE_LOGDIR%}" filePrefix="webcatupgrade" maxFileSizeKb="2147483647" filesN="1" fmtName="ODL-Text"/>
         </Writers>
         <WriterClassGroups>
            <WriterClassGroup name="All">1,2,3,5</WriterClassGroup>
            <WriterClassGroup name="File">1</WriterClassGroup>
            <WriterClassGroup name="Console">2</WriterClassGroup>
            <WriterClassGroup name="EventLog">3</WriterClassGroup>
            <WriterClassGroup name="UpgradeLogFile">5</WriterClassGroup>
         </WriterClassGroups>
         <Filters>
            
            
            
            <FilterRecord writerClassGroup="File" path="saw" information="1" warning="31" error="31" trace="0" incident_error="1"/>
            <FilterRecord writerClassGroup="File" path="saw.mktgsqlsubsystem.joblog" information="1" warning="31" error="31" trace="0" incident_error="1"/>
            
            <FilterRecord writerClassGroup="UpgradeLogFile" disableCentralControl="true" path="saw.subsystem.catalog.initialize.upgrade" information="1" warning="32" error="32" trace="1" incident_error="32"/>
            <FilterRecord writerClassGroup="UpgradeLogFile" disableCentralControl="true" path="saw.subsystem.catalog.upgrade" information="1" warning="32" error="32" trace="1" incident_error="32"/>
         </Filters>
      </Logging>
<SpatialMaps>
<ColocatedOracleMapViewerContextPath>/mapviewer</ColocatedOracleMapViewerContextPath>
<RemoteOracleMapViewerAbsoluteURL>http://4iapps-biserver:9704/mapviewer</RemoteOracleMapViewerAbsoluteURL>
<LayerDataLayout>
<MaxRecords>600</MaxRecords>
</LayerDataLayout>
</SpatialMaps>

   <ps:Catalog xmlns:ps="oracle.bi.presentation.services/config/v1.1">
         <ps:UpgradeAndExit>false</ps:UpgradeAndExit>
         <ps:UpdateAccountGUIDs>UpdateAndStartNormally</ps:UpdateAccountGUIDs>
      </ps:Catalog>

<ps:Listener xmlns:ps="oracle.bi.presentation.services/config/v1.1" port="9710" ssl="false"/>
      
<ps:JavaHostProxy xmlns:ps="oracle.bi.presentation.services/config/v1.1" ssl="false">
         <ps:Hosts>
         
<Host name="coreapplication_obijh1" address="4iapps-biserver" port="9810"/>
</ps:Hosts>
      </ps:JavaHostProxy>
      <ps:Alerts xmlns:ps="oracle.bi.presentation.services/config/v1.1">
         <ps:ScheduleServer ssl="false" ccsPrimary="4iapps-biserver" ccsPrimaryPort="9706"/>
         <ps:OfflinePresentationServicesURL>http://192.168.121.1:9704/analytics/saw.dll</ps:OfflinePresentationServicesURL>
      </ps:Alerts>
      <ps:ActionFramework xmlns:ps="oracle.bi.presentation.services/config/v1.1">
         <ps:ActionExecutionServiceEndPoint>http://localhost:9704/analytics/actions/ActionExecutionService</ps:ActionExecutionServiceEndPoint>
         <ps:TargetBrowsingServiceEndPoint>http://localhost:9704/analytics/actions/ActionRegistryService</ps:TargetBrowsingServiceEndPoint>
         <ps:LocationServiceEndPoint>http://localhost:9704/analytics/actions/LocationService</ps:LocationServiceEndPoint>
         <ps:WorkflowServer>http://localhost:9704</ps:WorkflowServer>
         <ps:WorkflowService>ANALYTICS</ps:WorkflowService>
         <ps:WorkflowSystem>obiaftests</ps:WorkflowSystem>
      </ps:ActionFramework>
   <Security>

<ClientSessionExpireMinutes>210</ClientSessionExpireMinutes>
</Security>
<ODBC>

<ResultRowLimit>65000</ResultRowLimit>
</ODBC>
<Views>
<Pivot>

<DefaultRowsDisplayedInDelivery>75</DefaultRowsDisplayedInDelivery>

<DefaultRowsDisplayedInDownload>2500</DefaultRowsDisplayedInDownload>

<DisableAutoPreview>false</DisableAutoPreview>
</Pivot>
<Table>

<DefaultRowsDisplayedInDelivery>75</DefaultRowsDisplayedInDelivery>

<DefaultRowsDisplayedInDownload>2500</DefaultRowsDisplayedInDownload>
</Table>
</Views>
<Dashboard>

<ShowPageTabsAlways>false</ShowPageTabsAlways>

<ShowSectionHeadingsDefault>false</ShowSectionHeadingsDefault>

<CollapsibleSectionsDefault>true</CollapsibleSectionsDefault>
</Dashboard>
<Marketing>
<ContentServer>

<URL>http://localhost:8765</URL>
</ContentServer>
</Marketing>
<Authentication>

<EnabledSchemas>UidPwd,Impersonate,UidPwd-soap,Impersonate-soap</EnabledSchemas>
</Authentication>
</ServerInstance>
</WebConfig>GTA

Deploy map viewer

Hi all,
can you plz tell me how to deploy map viewer to JDeveloper 10g i try do it but i cant.
i try to add the extension to jdeveloper but didn't work.
regards

You have to deploy it into JDev's embedded OC4J.
It's usually in $JDEVHOME\jdev\system\oracle.j2ee.<version>\embedded-oc4j\

Does Map Viewer require Spatial?

Hi,
I am new to Map Viewer and Spatial. My customer is interested in simple 'heat mapping' to augment their BI reports. Can I use Map Viewer without requiring Spatial underneath (ie. use relational data as a source similar to MapInfo)?
I am not a member of this forum, so please cc me in your response: [email protected]
Thanks!

Hi,
Oracle MapViewer can use SDO_GEOMETRY type columns stored in database, also it is possible to draw live features using (X, Y) and load external attribute data.
However, your customer can use free Oracle 10g Express Edition, XE comes with free Locator option. In fact, all data from external source (MapInfo TAB files, etc.) can be loaded into XE database and used by MapViewer. The benefit of this solution - all spatial/nonspatial data will be stored centrally in the system, using SDO_GEOMETRY type.
Regards,
Andrejus

Map Viewer Installation

I am trying to initialize the 'stand alone' version of Map Viewer on a Windows 2003 Server.
I have the Java Development Kit and Java SDK environment installed and they seem to be functioning properly.
I edited the 'start.bat' batch program for Map Viewer to the proper path names and ran it to start the instance. It reached the point where I entered a password, then it stopped running and the command window ended. I now cannot repeat this.
I also edited some environment variables as per the oc4j readme instructions:
ORACLE_HOME : directory where oc4j_extended.zip was extracted.
JAVA_HOME : location of the J2SE SDK to be used.
I have no experience in this and so wonder if I have them correct or not?
Can anybody give me a suggestion?
Thanks in advance.

Hi all,
Same situation here. I am frustrated with MapViewer Quickstart/stand alone installation. As suggested by the Readme.txt in the OC4J folder, i also edited the environment variables ORACLE_HOME for this installation (the JAVA_HOME is already set before, to the location of Java in my machine, so no change).
I set this ORACLE_HOME variable by something like Settings->Control Panel->System->Environment (in Windows). But the value suggested by this README 'violate' another setting that requires ORACLE_HOME variable specifies the complete path to the top-level directory that holds the Oracle environment.
In my case :
ORACLE_HOME = C:\oracle\product\10.2.0\db_1
other variable called CLASSPATH refers to this variable as well.
All right, then i tried to configure such that i have :
(1) ORACLE_HOME1 = C:\oracle\product\10.2.0\db_1
(2) CLASSPATH, in this variable, all references to ORACLE_HOME were replaced with ORACLE_HOME1
(3) ORACLE_HOME = C:\oracle\OC4J
README of MapViewer Quickstart/stand alone says that :
(1) The command "oc4j -start" should work
(2) http://<oc4j_host>:8888 should get you to the OC4J welcome page.
But :
(1) The command "oc4j -start" really initialize, but never reach the oc4j administrator password entry; it freezes at "initialized".
(2) the url http://<oc4j_host>:8888 really gets me to the Oc4j welcome page
(3) additionally, this is fatal : Things like Database control (http://localhost:1158/em/console/logon/logon) and iSQL*plus are inaccessible.
And i could not log myself in SQL*plus or from GeoRasterViewer (the application loaded but could not log into DB)
When i re-configure things back to :
(1) ORACLE_HOME = C:\oracle\product\10.2.0\db_1
(2) CLASSPATH, in this variable, all references set to ORACLE_HOME again
The result is
(1) “oc4j –start” command fails, it says : “OC4J startup failed”
(2) could not reach the Oc4j welcome page (http://<oc4j_host>:8888)
(3) I can then access again the Database control (http://localhost:1158/em/console/logon/logon) and iSQL*plus from browser;
Also can log in SQL*plus and log in from GeoRasterViewer.
Please give us some suggestions..
thank you
//d

Cannot navigate Map View window in DW CS6. No scroll bars, no keyboard scrolling.

What gives?

Nobody can tell you anything without proper system info or other technical details. This could even be inherent in how your files are linked - the map view does not resolve parametric links in JavaScript or PHP or whatever.
Mylenium

Google Map Integration with Map Viewer is not working

Hi Team,
My MapViewer Version: Ver11_1_1_7_B130111
I have created a Google Map (with Type of Map Source as "Google Maps") in Oracle Map Viewer and i could see google map in Oracle Map Viewer(using "show Map").
I wanted to show a village map theme over the above google map in a web page and i am using Jdeveloper to integrate map viewer with Village data. I could see the google maps inside Jdeveloper however when i run the Jdeveloper code google map is not shown inside the web page.
I tried with Oracle Maps, Bing Maps as the "map source" in map viewer and tried integrating inside Jdeveloper and got same result (blank screen). However when i tried a different mapviewer ( Base Map ELOCATION.WORLD_MAP from OracleFMW MapViewer Home ) i could see the map in the web page.
I could get all other base maps (created with "internal" as the map source") in the web page, so there is some thing that i am missing with Google Maps, Bing Maps, Oracle Maps. Could you please help me what is that i am missing or point to a help resource?
Thanks
Nag

Hi Jayanth,
Issue is solved after creating the web page using latest JDeveloper (11.1.2.4). Thanks a lot for your help
With Regards
Nag

Map Viewer in Obiee 11G

Hi,
I need to install map viewer in obiee 11g to show maps in dashboards. I have no idea about this, can any one help me.
Thanks,
PJ

OBIEE Samples has very good documentation and the schemas to download and set this up
http://www.oracle.com/technetwork/middleware/bi-foundation/obiee-samples-167534.html
Select the OBIEE 11.1.1.3 - Sample Application section

OBIEE 11g Map View - Issue with Label Translation

Hi All,
I have a strange translation issue with the Maps in 11g.
Created in English language to plot the Revenue for each of the Postal Codes.
I selected Postal Code and Revenue Amount in the Criteria and created a new Map View. It had the text 'Postal Code' in the Map Legend and then the scale for revenue amount.
Now I logged on with Chinese Language , it still appears as 'Postal Code' in English where in it was actually supposed to show it in Chinese.
We have a translation pack to get all the column names translated. If I try creating a new table view, it shows the translated text instead of 'Postal Code', but some how this doesn't work with Maps.
Has anyone faced similar issues ? Is there a workaround for this ?
Thanks for any pointers.

Hi,
I also encounter the same issue. When I view combined layout, I get the No Results message. But when I edit the table layout, I see that there are records returned. Does anyone had any luck in resolving this issue?
Thanks!

How do I add a VM that has too many dependencies to be shown as "Map View " ?

When in Table View there is no option to add/remove a VM to an App or to create/delete an App.
f.eks. I added three VM's and created an App called "Convergion"
Two of those VM's can only be shown in "Table View" because of too many outgoing dependencies.
I accidentally removed the Third VM (the one that could be shown in "Map View") and now I have no way of:
1) Adding the third VM back to the App
2) Removing the App or
3) Remove the two remaining VM's from the App
So, to create the App again I have to call it "Convergion~1" or something similarilly stupid.
But two of the VM's now still belong to "Convergion" (the now "Zombied" App) as well as "Convergion~1"
Any ideas ?
P.S. I should be able to create an App and manually add the VM's needed from the vCenter Inventory (Search box or similar) without having to have a "Visual" contact in the Map View.
Some maps get huge and it's not very practical.
Consider this a feature request.

Hi,
I'm Galit from the QE team of VIN.
All the things that you've described are correct.
It is actually an edge case where the only VM, that the manual App can be managed from its Map view, was removed from the App.
The Manual App management is as designed, and may be changed in the future.
There are 2 ways to overcome this situation:
1.You can, as you stated, create another Manual App with similar name and remain with the "Zombie App".
2. To run a specific command that will remove the Zombie App from the DB.
Please note that option no. 2 involves using an API that we do not publish.
If you would like to use option no. 2 contact me in private and we will see about supplying the relevant commands to run in order to delete the "zombie" application.
Thanks,
Galit Gutman

Mapped logical system

Hi Experts,
I have a confusion to use the type of RFC connection like when
to use ABAP connection and TCP/IP connections etc...
I have defined one logical system and define one RFC destination and when i am trying connect this two it is asking me to give Standard RFC destination for BAPI and dialog calls to connect to the logical system. i would like to know what is this ? why we need to give this?.
and we assign this logical system to the Mapped logical system. i d like to know what is this mapped logical system and when we need to assign the logical system to this mapped system.
Can anybody please clarify all my doubts.
Thanks, Izaz.

Hi Izaz,
ABAP connections are given between 2 SAP systems and TCP/IP is used between ABAP and JAVA.
Regards,
Suman

Projection problem in OracleAS Map Viewer

Hi,
I am using OracleAS Map Viewer 11 EA1and I try to display a map with an image (srid=1002000) and a vector (srid=8192) on the top. If I understand the documentation correctly, the vector might be reprojected into the map srid which is 1002000. But when the map is created, the vector is not correctly reprojected (I see some roads in the ocean!). I am wandering if it is a bug in map viewer; or maybe I didn't use it corectly!
My query looks like:
<map_request
title=""
datasource="all_images"
width="1229"
height="840"
srid="1002000"
antialiase="false"
format="PNG_URL">
<center size="7865.9766">
<geoFeature>
<geometricProperty typeName="center">
<Point>
<coordinates>
1230462.1 , -582145.4
</coordinates>
</Point>
</geometricProperty>
</geoFeature>
</center>
<themes>
<theme name="mosaic_pan'"
min_scale="5000000.0"
max_scale="0.0">
<jdbc_georaster_query
jdbc_srid="1002000"
datasource="all_images"
georaster_table="mosaic.mosaic_pan"
georaster_column="georaster"
asis="false">
     select georaster from mosaic.mosaic_pan where rowid='AAANn1AAKAAAAAKAAA'
          </jdbc_georaster_query>
</theme>
<theme name="road_l" min_scale="10000.0" max_scale="0.0">
<jdbc_query
datasource="all_images"
          jdbc_srid="8192"
render_style="MDSYS:L.MAJOR STREET"
spatial_column="shape1"
>select shape1 from can51.road_l</jdbc_query>
</theme>
</themes>
</map_request>
Thanks in advance,
Ganael

your map request seems correct, and yes mapviewer will automatically reproject your vector theme if it's srid (8192) is different from the request srid (1002000). What's more likely is that your georaster is not being displayed correctly? Have you tried displaying the vector road data against a know vector boundary data set like country/state, in the 1002000 projection and see if everything is working fine? then add the georaster layer back on and go from there....

Map View in Photoshop Elements 6

I am a new user of Photoshop Elements 6. I got some pictures which include GPS Information. Now I want to locate these pictures in the map view.
http://help.adobe.com/en_US/PhotoshopElements/6.0/help.html?content=WS7E96CCE9-EA88-4f7a-B 212-2C37C9CEEF1B.html
Unfortunately I am not able to find this feature in my program!
Any idea?

Johnny,
PSEs Map View is a toy feature that is buggy and not engineered to handle more than a couple thousand photos with map (GPS) locations. So I suggest staying away from it. See these messages:
John Rolfe Ellis, "Orgnanizer Map Problem" #2, 21 Jun 2008 8:54 am
John Rolfe Ellis, "Orgnanizer Map Problem" #13, 24 Jun 2008 3:33 pm

Error while mapping Views

When running the OMWB, the process will hang while trying to map the views. I have let it run overnight and it will still not move. Upon further examination of the error files, I got this error:
java.lang.NoSuchMethodError
     at oracle.mtg.sqlserver2k.parser.Sp72.querySpec(Sp72.java:10959)
     at oracle.mtg.sqlserver2k.parser.Sp72.queryTerm(Sp72.java:10736)
     at oracle.mtg.sqlserver2k.parser.Sp72.queryExp(Sp72.java:10679)
     at oracle.mtg.sqlserver2k.parser.Sp72.procedureStmt(Sp72.java:3369)
     at oracle.mtg.sqlserver2k.parser.Sp72.beginProcedure(Sp72.java:2611)
     at oracle.mtg.sqlserver2k.parser.Sp72.Start(Sp72.java:2575)
     at oracle.mtg.sqlserver2k.parser.Sp72.parse(Sp72.java:270)
     at oracle.mtg.sqlserver2k.parser.Sp72.parseView(Sp72.java:201)
     at oracle.mtg.sqlserver2k.parser.SQLServer2KParser.parseViewText(SQLServer2KParser.java:109)
     at oracle.mtg.sqlserver2k.server.SQLServer2KSourceModelMap.mapViews(SQLServer2KSourceModelMap.java:1489)
     at oracle.mtg.sqlserver2k.server.SQLServer2KSourceModelMap.mapSourceModel(SQLServer2KSourceModelMap.java:389)
     at oracle.mtg.sqlserver2k.ui.SQLServer2KCaptureWizard.map(SQLServer2KCaptureWizard.java:531)
     at oracle.mtg.migrationUI.ActionMenuHandler._mapSourceModel(ActionMenuHandler.java:457)
     at oracle.mtg.migrationUI.ActionMenuHandler.run(ActionMenuHandler.java:95)
     at oracle.mtg.migration.WorkerThread.run(Worker.java:268)
Has anyone encountered this or something similar before? Any help is greatly appreciated
J

There is information on reporting bugs with reproducible testcases in the link below.
http://www.oracle.com/technology/support/tech/migration/workbench/index.html
In the case of mapping views, the source view text or a cut down smaller testcase that reproduces the error, and the workbench version, are usually sufficient.
Regards,
Turloch
Oracle Migration Workbench Team.

Mobile map viewing system

Similar Messages

Maybe you are looking for