Mobile me and contacts.

Hi, when I first got my Iphone 17mths ago and at the time could only transfer my contacts through mobile me and the free trial. However, that was over after 3mths and since then everytime I go into my contacts it says "cannot verify mobile me" but the contacts are still there. I tried removing the mobile me from my phone but I lost all my contacts so had to reconnect. Now, with the new facebook upgrade its appearing there to when it tries to connect with mobile me. What's the way around this? One day I'd love to pay for mobile me but it's not feesible at the moment.
Ryan

Why could you only transfer your contacts to your iPhone through MobileMe? You didn't have a computer available at the time?
If you are syncing contacts over the air with a MobileMe account on your iPhone, if you turn Contacts off for over the air syncing with the account settings or you delete the account from your iPhone, the contacts will no longer be available on your iPhone.
Your contacts should be available with the Address Book on your Mac and if so, you can sync contacts direct with the Address Book on your Mac via the iTunes sync process. This will not sync the contacts on your iPhone that were downloaded from your MobileMe online address book with the Address Book on your Mac.
Since your MobileMe account is no longer active, you will continue to get this message if your former MobileMe account is not deleted from your iPhone.

Similar Messages

How do you add a mobile number and a home number to a contact on a 4S

How do you add a mobile number and a home number to a contact on an iPhone4S?

First add the mobile number. Once you've done that there should be another field that shows 'iPhone". Tap on 'iPhone' and change it to 'Home' then input the home number.

Cisco Jabber for Mac - Directory Lookup and Contact Fields

Hello,
After having issues myself with Cisco Jabber for Mac 9.2 specifically with Active Directory lookups not working, or contact information not populating (and therefore not being able to call users from the contact list as no telephone information exists) I am including a sample jabber-config.xml file that works for me.
Please note: there are many different ways to configure this. What I will be showing is the method that works for me and my deployment, which is pretty standard.
As always and as a disclaimer, once again, this is what has worked for my deployment scenario. Always keep backups of your configuration files, and always be mindful of anything you have configured already, especially in the jabber-config.xml file.
Background
My deployment is based on CUCM 9, with 1 publisher and 2 subscribers. I also have a CUCM IM & Presence 9.0 server. This assumes that you have already configured your deployment and Jabber is functioning already, albeit with the aforementioned issues.
As for Active Directory, my deployment will be based on Windows 2008 R2 Domain Controllers running in native 2008 mode. For this example, we will be searching directly against one of the DCs with a Global Catalogue role. Please be aware that in large deployments you will have to plan accordingly with regards to lookup traffic from Jabber clients to the DCs.
Also, as of Cisco Jabber for Mac 9, the client no longer can search via the CUCM internal directory (which may be made of local end users, Active Directory synced users, or a mix of both) and this must be done via a LDAP mechanism.
Scenario
In this deployment scenario, Cisco Jabber for Windows is working properly - you can search and add people from Active Directory, and contacts in your contact list have all the appropriate fields populated from Active Directory. However, when trying the same with Jabber for Mac, Jabber for iPhone or Jabber for iPad you notice that you cannot perform a directory lookup, and if you add people directly (for example, [email protected]) the user only has the IM field populated. No telephone, email or additional information is displayed.
Solution
Whereas Cisco Jabber for Windows uses the EDI mechanism (native Windows), whereby when running from a computer that is on the domain (or in the event that you are search for contacts in another Active Directory domain where a domain trust exists) , Jabber for Mac / iPhone / iPad uses the BDI mechanism.
In this case, you will need to provision a jabber-config.xml file that you will upload to your TFTP server (or Publisher) that will be "downloaded" by your Jabber for Mac client and also used by the iPhone and iPad client. You can configure many options in the jabber-config.xml file, but for this example we will place just the information that we need to order for these clients to request and display Active Directory information.
Please note that the configuration may vary depending on your deployment, but at the very least we will be:
- Configuring a DC where we will perform the lookup.
- Configure credentials that will be used to perform the lookup. This will be an Active Directory account that has read rights on the Active Directory domain. Please note that these credentials are saved in plain text in the file, so ensure that the account that you will be using is not privileged.
- Configure the server port that we will be using to perform the lookup.
- Configure the Search Base. This is basically where we want the directory lookup to happen. You can either choose for this lookup to start at the "base" of the domain (and therefore the search will iterate through all the user accounts and and OUs below the root base) or define a specific OU where you want to search.
Caution!
- There is a current limitation with Cisco Jabber for Mac whereby you can only have 1 search base configured. Please keep this in mind if, like me, you have multiple OUs (like an OU for each company in your organization) and under these OUs you have sub OUs as a user account container.
- If using the top level search base, unless you specify a filter, you will potentially be able to search for all user accounts in the domain. You will need to configure the <BDIBaseFilter> parameter if you want to fine tune your search ability.
Steps
These are the steps I have followed. Other steps or considerations may vary.
- Log in to your TFTP server and download the jabber-config.xml file and keep it as a backup. If you are already using the jabber-config.xml file for other purposes, do not worry - you can add your BDI information parameters inside.
- Remove the jabber-config.xml file
- Edit the jabber-config.xml file and configure thus:
<?xml version="1.0" encoding="UTF-8"?>
<config version="1.0">
    <Directory>
        <DirectoryServerType>BDI</DirectoryServerType>
        <BDILDAPServerType>AD</BDILDAPServerType>
        <BDIPrimaryServerName>DOMAIN CONTROLLER IP ADDRESS</BDIPrimaryServerName>
        <BDIPresenceDomain>YOUR PRESENCE DOMAIN</BDIPresenceDomain>
        <BDIServerPort1>3268</BDIServerPort1>
        <BDISearchBase1>YOUR SEARCH BASE</BDISearchBase1>
       <BDIConnectionUsername>[email protected]</BDIConnectionUsername>
        <BDIConnectionPassword>PASSWORD</BDIConnectionPassword>
        <BDIEnableTLS>0</BDIEnableTLS>
   </Directory>
</config>
For example, let´s assume the following:
- Domain controller IP address is 10.1.1.2 .
- Your presence domain is test.local .
- Your search base will be test.local using the top level of the domain.
- Your username with which you will be doing your searches is called walt . Usually you can either identify walt as test.local\walt or [email protected] . It is always best, in these sort of scenarios, to use the UPN convention so we will be configuring a [email protected] .
- The password is the Active Directory password for the account walt .
- I have disabled TLS in my case. There are issues with the Jabber for Mac client when using other security methods.
<?xml version="1.0" encoding="UTF-8"?>
<config version="1.0">
    <Directory>
        <DirectoryServerType>BDI</DirectoryServerType>
        <BDILDAPServerType>AD</BDILDAPServerType>
        <BDIPrimaryServerName>10.1.1.2</BDIPrimaryServerName>
        <BDIPresenceDomain>test.local</BDIPresenceDomain>
        <BDIServerPort1>3268</BDIServerPort1>
        <BDISearchBase1>DC=test,DC=local</BDISearchBase1>
       <BDIConnectionUsername>[email protected]</BDIConnectionUsername>
        <BDIConnectionPassword>walt01!</BDIConnectionPassword>
        <BDIEnableTLS>0</BDIEnableTLS>
   </Directory>
</config>
One you have configured the jabber-config.xml file, you will now need to upload it to you TFTP server. Once uploaded, you will need to restart the Cisco TFTP service. Again, my TFTP server is on my CUCM publisher, so:
- I go to Cisco Unified OS Administration on my Publisher server, TFTP File Management and I upload jabber-config.xml to / directory
- I then go to Cisco Unified Serviceability on my Publisher server, I locate the Cisco TFTP service and I restart the service
Once this is done, you can figure up your Jabber for Mac client. As a test, on your Mac (using Terminal) go to:
/Users/username/Library/Application Support/Cisco/Unified Communications/Jabber/Config
In here you will see several files, but what we want to see is jabber-config.xml . As soon as you start the Jabber for Mac client and log in, the jabber-config.xml file will download from your TFTP server and get saved here. When you see it appear, just type in your terminal window more jabber-config.xml and make sure that the output is the same as the xml file you created.
From there, try doing directory search. If you have previously added contacts and they still lack attribute information, you will need to remove them (sometimes it will not refresh properly) and add them again from the directory.
I will be updating this guide and ammending anything that is incorrect, but this is meant to be a quick checklist and steps to get this, at least in the most very basic version, up and running for Jabber for Mac.

Hello,
Thanks for this post! It works, I can do lookup and also I can add found contact to contact list and get information about contact from LDAP.
One more question: - I can't get all information about contact. I don't get e.c mobile phone number and more others attributes. I have tried to expand your file as follows:
<?xml version="1.0" encoding="UTF-8"?>
<config version="1.0">
<Directory>
<DirectoryServerType>BDI</DirectoryServerType>
<BDILDAPServerType>AD</BDILDAPServerType>
<BDIPrimaryServerName>IP of AD</BDIPrimaryServerName>
<BDIPresenceDomain>Presence Domain</BDIPresenceDomain>
<BDIServerPort1>3268</BDIServerPort1>
<BDISearchBase1> Search Base</BDISearchBase1>
<BDIConnectionUsername>User</BDIConnectionUsername>
<BDIConnectionPassword>Password</BDIConnectionPassword>
<BDIEnableTLS>0</BDIEnableTLS>
       <BDISipUri>msRTCSIP-PrimaryUserAddress</BDISipUri>
       <BDIPhotoSource>thumbnailPhoto</BDIPhotoSource>
       <BDIBusinessPhone>telephoneNumber</BDIBusinessPhone>
       <BDIMobilePhone>mobile</BDIMobilePhone>
       <BDIHomePhone>homePhone</BDIHomePhone>
       <BDIOtherPhone>otherTelephone</BDIOtherPhone>
       <BDITitle>title</BDITitle>
       <BDICompanyName>company</BDICompanyName>
<BDILocation>co</BDILocation>
<BDIPostalCode>postalCode</BDIPostalCode>
       <BDICity>l</BDICity>
       <BDIState>st</BDIState>
       <BDIStreetAddress>streetAddress</BDIStreetAddress>
</Directory>
</config>
But it didn't help.
When I capture lookup via Wireshark, I can see that Jabbers sends search request with bunch of attributes, but from LDAP answer contains only 8 attributes. (see attached screenshots)

Imac, mobile me and iphone not syncing

I had a big software problem with my iMac and I was told i might need a new hard drive and so I was afraid (probably needlessly) that if i had a new hard drive and lost all my info that my contacts and calendar on my imac would be blank and that it might then turn my mobile me and iphone calendar and contacts blank.
So I guess I turned something off on the off chance that could happen. So now this is what is going on and i want to fix it.
If I add a calendar date to my iphone neither mobile me or my imac calendar are updated.
If I add a calendar date to mobile me the imac is updated but the iphone is not.
If I add a calendar date to the imac mobile me is updated and the iphone is not.
So it looks like I've somehow turned off my iphone from the mix. How do I turn it back on?
Thanks for your help,
Susan

In order to change your Apple ID or password for your iCloud account on your iOS device, you need to delete the account from your iOS device first, then add it back using your updated details. (Settings > iCloud, scroll down and hit "Delete Account")

How do I "reset" calendars and contacts on iPod Touch 2G

I need to know how to erase and/or reset all contacts and calendars on my ipod Touch. Initially I synced with my mobileme account. When one of my contacts did not sync properly, however, I set iTunes to sync with calendars and contacts. Now I have duplicate contact and calendar entries on my Touch. I want to erase/reset all calendars and contacts on my Touch, and then sync them again and in the future via mobileme. Please help. Thanks!

Ah, I see what you did. However I think my problem is a little bit different. I have my "mobile.me" contact file (which syncs just fine), PLUS I have an "on my iPod touch" contact file. I'd like to delete the "on my iPod" set of info and retain the Apple (me.com) info.
Any suggestions would be welcome.

How can I import google bookmarks and contacts from my phone.? (dont want to suddenly duplicate my phones memory, doubleing it

Just want to import contacts. What has happend before when switching phones is automaticaly my phones contacts are doubled or quadrupled. Do not know how to delete repeated contacts so have to delete extras one by one. Varriea over to computer also. HELP!

This doesn't seem like it's a Firefox issue. I'd suggest you contact your mobile provider and they may be able to help you.

Can I sync Office 2013 Home premium Outlook calendar and contacts across all my computers without using Hotmail account

I don't want to use a Hotmail account to do this.
Is it possible?
The licence is for 5 PC's but seems to have no sync ability.

I just went to Windows 8.1 and I purchased Office 365 home premium for 5 PCs or Macs and 5 mobile devices. No where in the page or the "learn more info" did it say it would not sync up with iPhones and iPads. I am concerned I wasted my money because
I truly wanted to have Outlook on my iPhone and Ipad. There is an OWA for iPad and Iphone available but I have deducted that it needs Microsoft Exchange which is not included in the home premium version of office365. I am not sure what good it does to advertise
syncing with mobile devices when it truly will not sync up. Is this True?
For $100/year, you would think exchange could be included so these syncing issues would not be a problem. I do not want to keep up with more email accounts just to make it work with Microsoft.
I am trying to keep things simple. I do use iPhones and Ipads, and based on the advertising for office 365 all my current issues would be seamlessly fixed by going this route. I'm afraid not unless someone can give me the simple solution that does not
require a PHd in computer saavy. I am not a rookie, but after 4 hours of trying everything I know to make it work, I just could not do it through my new office365 software or the apps for Iphone or Ipad. In addition, there were conflicting answers and
responses from Microsoft when I called or chatted with their support people.
BTW, I did download iCloud onto my new laptop and it knew that it was not syncing with Outlook and immediately asked if I wanted to fix. Downloaded the fix, restarted system, and calendar and contacts immediately synced up on my apple devices and my
new computer.
The funny thing is that I still cannot get Office365 to sync with the windows 8.1 calendar or contacts app on the start page using my POP email account that I have had for many years. I also think it needs exchange. Please provide some guidance
here.
I'm trying not to be difficult but am looking for the software to work as advertised so I can stick with all office products. If not, just give me a refund and I will buy a stand alone version for my PC and sync up with Apple apps which work well and
are much less expensive. Thanks for your assistance.

Calendar does not sync via ActiveSync. Mail and Contacts work fine.

I recently started using ActiveSync to connect to my corporate Exchange server. Mail and contacts synchronize properly, but calendar items are not downloaded from the server. The iPhone can write to the calendar by adding a new appointment of accepting a new meeting request. I can also see the full list of calendars in my Exchange mailbox when using the iPhone. Simply put, the calendar items are the only part that's missing.
My IT team has confirmed that calendar items will sync to Windows Mobile devices using ActiveSync.
Here are the steps I've taken to solve the problem:
1. I enabled and disabled calendar using the On/Off slider.
2. I removed and reconfigured the Exchange account on the iPhone
3. I confirmed that all calendar items in Exchange had the Message Class set to "IPM.Appointment"
4. I restored the iPhone to factory settings and used a new test Exchange account to confirm that corrupted calendar items were not an issue.
5. Confirmed that the capitalization of my e-mail address in the Exchange Account Info on the iPhone matches the primary SMTP entry in the Exchange GAL.

Guys, I did a bit of research with my other iPhone/Exchange - buddies and this is what we found out:
1. Friend sends me an calendar event from his PC / Exchange Account
2. Calendar event displays as tentative on both my iPhone and on my PC / Exchange Account
3. I accept the calendar event on my PC / Exchange Account
4. Calendar event turns to "busy" on my PC / Exchange Account
5. Calendar event disappears from my iPhone
6. I double-click the event on my PC / Exchange Account and click "Accept" again
7. Calendar event reappears on my iPhone
Funny enough, this does not happen with all events - it seems to depend on the Exchange server and/or Outlook version in use. For those affected: Is your Exchange Server 2003 or 2007, and what version is the Exchange Server of the person who sent you the event in the first place?

Apps don't sync across devices after I moved to iCloud. I have 1 apple ID (from mobile me) and 1 that use for iTunes

Apps on my various iPads and iPhone used to sync automatically. Whenever I used to buy an apps, it would just automatically appear in all my devices. I'm not sure what does that, it could have been the MobileMe account, but it was working perfectly until after I moved to iCloud. Now, apps don't sync anymore. Calendars, mails and contacts do. I use 1 apple ID for I cloud and 1 for iTunes because I moved mobile me account to iCloud. Could someone please help? This is bugging me and I searched all over the Internet but can't find answer.

I have the exact same problem. Help!

Complaints, leads and contacts are not shown in the account overview

CRM 5.0, ICWebClient
Hi,
in ICWebClient (SAP Standard) there are two account overviews available. The second one provides an overview of complaints, campaigns, orders, leads and contacts related to a specific customer. Although there are several leads, complaints, orders and contacts related to a specific customer existing only complaints are shown in the overview table. The tables related to leads, orders and contacts are empty.
Regards,
AV

hi!
well i had the same "problem" but have you checked the format in which you saved your numbers. for example as you said you are using t-mobile austria whenever you save a number as 0699xxxxxxxx the iPhone usually wont show the caller id.
what usually helps is when you always use the international-format
for example if its an austrian number 0043 699 xxxxxxxx
Or for a vienna-landline 0043 1 xxxxxxxx
and so on and so forth. just try it with one or two contacts and see if that is solving your problem. it solved that problem for me and also somebody else.
(by the way: im using t-mobile austria as well. but originally teh same happened to me with any other simcard i tried)
hope that was of some help for you
all the best und grüße aus dem 16ten

I currently have aT-Mobile sim, and therefore, a UK telephone number. Can I get a sim from EE with the same number to use in my iphone 5?

I currently have aT-Mobile sim, and therefore, a UK telephone number. Can I get a sim from EE with the same number to use in my iphone 5?

The easiest way to find out what carrier it's locked to would be to call the store where you purchased the phone.
The phone can be unlocked from any location. However, most carrier have restrictions about unlocking and you have to contact them for details.

Calendar and contact DUPLICATES

I use Mobile me on my I phone for both calendar and contacts but why when I go into groups it shows duplicated of both my contacts and calendar events, when i update my contact on mobile me it doesnt update it on the "My Iphone group" I dont want duplicate of my contacts and calendar...I only want one....how can i change this....i tried on settings on my Iphone, or do i need to do it on my I Tunes when i sync it?
thanks

Do a forum search - the search bar is on the right.
This is asked and answered several times.

3GS + OS4.0: Contact fileds missing and contacts missing

Since I upgraded to OS4.0 on my iPhone 3GS, two things have gone wrong:
1. Many of my contacts have disapeeared from the Contacts list. I can only find the missing contacts if I search for them in Spotlight Search. The other thing that has changed is that now all contacts that have not disappeared from the Contacts list appear as as belonging to a group called "All Contacts". What can I do to recover all the contacts that Spotlight Search can find somewhere in the phone but that do not appear in the Contacts list? There is no use in recovering a previous backup in Itunes, because I didn't do a backup before this issue. All the contacts are in the phone, except that maybe 75% of them are lost somewhere and only available through Spotlight Searck.
2. Since the update to 4.0, everytime I want to add a new contact, I only have two fields available: Mobile (phone) and Home (email). All the other fields (such as Home phone, Work phone, etc.) are missing. Is there any way to solve this?
Thanks a lot in advance,
Daniel

Yes, I've tried all that.
And I was already thinking of restoring as new, but I was afraid I would lose something on the way. Is there a way to restore as new and then go back to any OS version previous to 4.0? Will all my apps, music and contacts be available after restoring?
Thanks,
Daniel
The basics from the manual are reboot, reset, and restore.
Have you rebooted the device?
Have you tried resetting all settings?
If neither of those works, the next step would be to restore as new and then re-sync your contacts, media, and apps.

Mobile no of contact person in customer master

Hi.
I am entering mobile no of contact person in customer master but I am not able to find where it is stored in database. Actually i got telephone no of contact person in table KNVK. but mobile no is not there. Please tell me.
Thanks.

hi Puru,
If you create a customer through tcode XD01
the following fields are available for storing telephone numbers in table ZA1_D0100
-- TEL_NUMBER - Telephone number
-- MOB_NUMBER - Mobile number ( First telephone number )
Good Luck and thanks
AK

Device Channel Rules for All mobile phones and Tablets?

I am developing master pages for different devices, my target is to develop different master page for Desktop, Mobile phones and Tablet.
Default device channel works for desktops, “$FallbackMobileUserAgent" works for both mobile phones and tablets but I want to design different master
page for all tablets.
Is there any fall back rule that targets all tablets? and any rule that targets mobile phones only?
Update: I found "ipad" and "iphone" inclusion rule works across all apple devices.

Hi,
According to your post, my understanding is that you want to create rule that targets mobile phones or tablets only.
Per my knowledge, channels control which master page is used to show your site on for example iPhone or iPad. Channels are bound to master pages, and channels are bound to user agent string of device in use (phone, tablet or PC).
You need to supply different user agent substrings and order of device channels.
For more information, you can refer to:
http://msdn.microsoft.com/en-us/library/office/jj862343(v=office.15).aspx
http://sp2013.blogspot.com/2012/07/channels-in-sharepoint-2013.html
http://jussionsharepoint.com/targeting-multiple-browsers-and-devices-in-sharepoint-2013-using-device-channels/
Thanks,
Linda Li
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Linda Li
TechNet Community Support

Mobile me and contacts.

Similar Messages

Maybe you are looking for