[Mobile Me] No Device Registered

I had an iPod Touch 4G and I lost it. Lucky I had mobileme account and the app on my ipod touch. I remote wiped it out and then No Device Registered pops up. and also I checked my mail and didn't recieve anything from mobileme yet... its been couple hours now. Did it sucessfully wiped it or is it not deleted because it said that its pending watever and I pressed erase but no mail recieved..
Sorry for my bad english....

"Find my iPod" will not work unless the iPod connects via wifi which it will only do if it on (or in sleep mode) in the presence of an unsecured router.

Similar Messages

  • TS3376 I had my iphone set up to be tracked as registered with iCloud and it had been using it for a year one day it said no devices registered and stopped working why???

    I had my iphone set up to be tracked as registered with iCloud and it had been using it for a year today it said no devices registered and stopped working even though i tracked the selected iphone 4 device an hour earlier why did it do this???

    So basically the phone I was tracking was working an hour earlier it had no signal at times when it did pick up a signal it located it easily but an hour later the message came up no devices registered when my friend returned home I Checked the device I was tracking to make sure find my iphone was on but it was off and my friend didnt turn it off so my question is why did it turn itself off???
    Confused?

  • Possible to get 'Automatic' device register without NSP ?

    Hi 
    Anybody pleade hint me config ISE1.2
    I need to do separated ssid called on-board. Once non registed device comes in, ISE get sredirect to registering portal. 
    I can finish self fill in device register which user need to fill in his MAC manually. And I also finish dual ssid practice as dCloud ISE demo. However I need configure in between of those.
    Anyone please give me configures or suggestions
    Thank you
    Nipat

    Hello Nipat. This is not possible in version 1.2. In version 1.2 you have two options to get the device registration process:
    1. DRW (Device Registration Web Auth): But this method cannot be combined with any other authentication methods
    2. NSP (Native Supplicant Provisioning): You already knew about this one but it sounds like it is not an option
    You can look into upgrading to 1.3 as i believe you will be able to "chain" the CWA and DRW methods with other authentication methods. 
    Thank you for rating helpful posts!

  • HT204074 i can download the same music on all of my devices registered to me on iTunes

    i can download the same music on all of my devices registered to me on iTunes

    Yes, you can. To have this done automatically select auto download of Music in Settings > iTunes and App Store

  • My device registered under another apple ID, how to register under my ID

    My device registered under another apple ID, how to register under my ID

    Unfortunately, you can't transfer purchases from one Apple ID to another.

  • Need to restore iphone5 but screen broke and find my iphone app active but no device registered

    My iphone5 screen recently stopped working (1 year and 3 wks after warranty expired!) and kinda froze so the screen sensor is disabled and is not swiping. Cant answers calls or access anything othe rthan commands via Siri and bluetooth incar/ headphones to play music and make calls.... My network provider advised me to back up and completely restore.  When trying to restore via itunes it asks me to deactivate find my iphone app in settings.  Trouble is i cannot access this due to broken screen/sensor... my phone has its passlock on also so siri will not open settings unless i touchscreen in my pin.
    using my sons phone i tried to locate my phone using the app  find my iphone but it said i was 'offline'  i accidently ended up removing the device from my account (happy clicking) and now icloud.com states no device registered. Grrrrrrrr  and now i can only register device by changing settings on the phone itself.
    I cannot access my phone to change setting so cannot restore. how can i restore factory settings? or even completely deactivate/remove find my phone app.. I tried to delete it from itunes but it still shows im still active but with no device registerd.  i am not sure if its something to do with icloud settings? im not that clued up with iphones despite being an apple customer for  5 years!  
    can anyone suggest an alternative to restore the phone (in hope the screen will work) though i have read other posts and i dont have the random screen freeze... which is related to ios 7 upgrade... but it is permanent.  I reckon I will need Apple to fix the sensory mechanisms inside
    please help as i am having to use a really rubbish smart phone...

    Thanks diesel vdub for your suggestion.... :-) I managed dfu mode which allowed me to reset to factory settings though the screen was still broke. Think I need replacement screen/sensor. No doubt cost me a small foutune to fix!
    Cheers anyway. I hope it works for others with similar problem.

  • If you have an ipad2 with 3g, would a mobile wi-fi device work better than 3g?

    Would it make more sense to purchase a mobile wi-fi device instead of activating the "built-in" verizon or at&t 3g component since so many people are experiencing problems?  The wi-fi component of my IPAD2 works perfectly....I have not activated the Verizon 3g component.

    I bought the ATT 3G iPad 1.  I use wifi all the time and wanted the 3G for those rare times that I'm on vacation without wifi or am abroad.  I did activate ATT for one month to be sure it worked - it did.  Then I deactivated it; haven't reactivated it since.  Since I don't have a smartphone, and I didn't want to get a long term plan with a mifi unit, I feel that my ATT iPad is right for me.
    If you see no possibility of ever using 3G, then get the wifi iPad.  If you plan to get a mifi (is this what you mean by "mobile wi-fi device"?) then you won't need a 3G iPad.

  • HT1386 ITunes keeps complaining about too many devices registered to my account Max 5

    I have 3 devices registered with my account/appleID and Itunes remains complaining about 5 devices coupled to my account.
    Bad user experience, who is going to help me?
    The message remains: You cannot Authorize more than 5 computers while my account overview tells me that there 3 devices registered????
    Why is this made so difficult all ?????

    The number of computers that your account is authorised on and the number of computers and/or devices associated to an account are different things.
    The 'manage devices' section of your account shows the computers and/or iOS devices that are associated to your account i.e. tied to it via iTunes Match, automatic downloads and/or redownloading past purchases : iTunes Store: Associating a device or computer to your Apple ID.
    For the computers that are authorised (iOS devices aren't authorised/deauthorised) then have you had other computers in the past and/or updated/reinstalled the OS on your current computer and not deauthorised them ? IniIndividual computers can only be deauthorised directly on them, but if you have 2 or more computers authorised then you can log into your account on your computer's iTunes via the Store > View Account menu option and 'deauthorise all' (which you can do once every 12 months) and you can then authorise/reauthorise the computers that you still have and need : http://support.apple.com/kb/HT1420
    There can be a maximum of 10 computers/devices associated to an account - but as a computer also has to be authorised (and there can be at most 5 computers authorised) for it to be able to associated, at most 5 of the 10 can be computers.

  • Are mobile internet USB devices still not working on Snow Leopard?

    Are mobile internet USB devices still not working on Snow Leopard? I actually had to go back to my previous operating system to get this to work. I would however prefer to use Snow Leopard...if Apple & HUAWEI have finally got their act together!

    There appears to be a problem with drivers for USB wireless modems with 10.6. I upgraded from Leopard to Snow Leopard and now can't connect to the internet with my wireless modem. I hope Apple sort this out soon. Or maybe it's Huawei that needs to put a 10.6 driver into its software.

  • What's the relation between mobile components and device profile?

    We get the requirement to assigne Mobile components to device profiles.
    As a comparison for understanding, 
    R/3:    authorization is assigned to user profiles
    MI:      Mobile components are assigned to device profile.
    Am I right? If so, are mobile components basically predefined by SAP since
    security authorizations are basically  provided by SAP?
    Thanks!

    Hello jennifer,
    A Mobile Component is any part of Software which will be deployed and wich is running on a mobile device.
    This could be for example a Database, JVM, Mobile Client or of course a mobile application (developed or pre-packaged).
    A Device Profile is a kind of grouping mechanism which helps you to assign the Mobile Components to a large number of devices.
    For Example you create a Device Profile which includes the Mobile Components (DB,JVM, Mobile Client and your Mobile application ). You only need to create this Device Profile once and you can assign it do many devices.
    This helps you to administer your devices in a very efficient way.
    I hope this helps.
    Best Regards,
    Stefan

  • I connect my mic with an M-audio mobile pre usb device.  When I try to record, I can see that my voice is recording but can't hear it during playback.

    I connect my mic with an M-audio mobile pre usb device.  When I try to record, I can see that my voice is recording but can't hear it during playback.  I tried different input and output settings but it didn't help.  Any help will be appreciated.

    Hear your microphone or instrument as you play and record (monitoring)
    You can hear, or monitor, input from an instrument or microphone in GarageBand while you play and record. When you turn on monitoring for a track, you hear the musical instrument or microphone connected to the track’s input. Monitoring lets you hear yourself play so that you can hear the part you want to record as well as the rest of the project.
    You can turn on monitoring for a Real Instrument track or Electric Guitartrack from the track’s header, or in the Track Info pane. Electric Guitar tracks always show their monitoring buttons, and you can show monitoring buttons for Real Instrument tracks using a menu command. You can use monitoring with feedback protection to avoid feedback while you play.
    Hide
    To turn on monitoring in the track header:
    Choose Track > “Show Monitoring for Real Instrument Tracks.”Monitor buttons appear in the headers of Real Instrument tracks. On tracks with monitoring turned on, the button lights yellow.
    Click the Monitor button in the header of the track you want to use.
    HideTo turn on monitoring in the Track Info pane:
    Double-click the header of the Real Instrument or Electric Guitar track you want to turn on monitoring for.The Track Info pane opens.
    From the Monitor pop-up menu, choose one of the following:
    Choose Off to turn off monitoring. You can hear your instrument only while you record.
    Choose On to turn on monitoring and protect against feedback.
    Choose On (no feedback protection) to turn on monitoring without feedback protection. If the input level is too high, it may cause feedback (especially if you are using a microphone and listening to your project through your computer speakers).
    For an Electric Guitar track, you can view the Monitor pop-up menu by clicking Edit, and then clicking the back side of the amp. The Monitor pop-up menu appears with the input controls below the stage.
    You should usually turn off monitoring when you are not playing or singing. When monitoring is turned on, your computer can pick up output from your speakers or monitors, causing unwanted feedback. Using headphones rather than speakers to listen to your projects can help eliminate feedback.
    If you select your computer’s built-in microphone as the audio input, in the Audio/MIDI pane of GarageBand preferences, monitoring is turned off for all Electric Guitar tracks to avoid unwanted noise.
    SEE ALSO
    If you don’t hear sound from a Real Instrument 
    Was this page helpful?Send feedback.
    © 2010 Apple Inc. All rights reserved.

  • Can two apple devices registered to same apple ID face time with each other. My scenario is face time between IPAD and IPHONE both registered in my apple ID

    Can two apple devices registered to same apple ID face time with each other? My scenario is face time between IPAD and IPHONE both registered in my apple ID

    Using FaceTime http://support.apple.com/kb/ht4319
    Troubleshooting FaceTime http://support.apple.com/kb/TS3367
    The Complete Guide to FaceTime: Set-up, Use, and Troubleshooting Problems
    http://tinyurl.com/32drz3d
     Cheers, Tom

  • No device registered

    before i'm using this features find my ipod it's great there locate where im i.  but now i try again it comes "no device registered"  my friend too it happened this now his using ipad2. the problem is in the device or MobileMe. pls. help....

    "Find my iPod" will not work unless the iPod connects via wifi which it will only do if it on (or in sleep mode) in the presence of an unsecured router.

  • Data transfering between a mobile and  F2M03GLA device using bluetooth

    I am using F2M03GLA (which is a low power embedded Bluetooth v2.0+EDR module with built in high out put antenna).
    I want to send and receive data from mobile to this device using bluetooth . I want to know wheather the data transfering from a mobile to F2M03GLA device is same as data transfering between a mobile to mobile. If there is any difference can u please specify me those differences.

    Have you looked at the peer to peer stuff from Adobe? That might solve the data transfer without needing to stand up your own server.

  • HT4946 My iPad was stolen.  I have backed it up and it is a device registered on 'Find My iPhone'  Where can I find out the serial number or other identifying information to report it to the police?

    My iPad was stolen.  I have backed it up on iTunes and it is a device registered on 'Find My iPhone'  Does anyone know where can I find out the serial number or other identifying information to report it to the police?

    These links may be helpful.
    How to Track and Report Stolen iPad
    http://www.ipadastic.com/tutorials/how-to-track-and-report-stolen-ipad
    Reporting a lost or stolen Apple product
    http://support.apple.com/kb/ht2526
    Report Stolen iPad Tips and iPad Theft Prevention
    http://www.stolen-property.com/report-stolen-ipad.php
    How to recover a lost or stolen iPad
    http://ipadhelp.com/ipad-help/how-to-recover-a-lost-or-stolen-ipad/
    How to Find a Stolen iPad
    http://www.ehow.com/how_7586429_stolen-ipad.html
    Apple Product Lost or Stolen
    http://sites.google.com/site/appleclubfhs/support/advice-and-articles/lost-or-st olen
    Oops! iForgot My New iPad On the Plane; Now What?
    http://online.wsj.com/article/SB10001424052702303459004577362194012634000.html
    If you don't know your lost/stolen iPad's serial number, use the instructions below. The S/N is also on the iPad's box.
    How to Find Your iPad Serial Number
    http://www.ipadastic.com/tutorials/how-to-find-your-ipad-serial-number
     Cheers, Tom

Maybe you are looking for

  • IP Phone SSL VPN - Licenses required.

    Hi, Can someone confirm the linceses required for me to get this working. I understand that it needs the 'AnyConnect for Cisco VPN Phone' license but do I also need to have anyconnec essentials? This is for ASA version 8.2 and the a license info belo

  • How do I restore my music to my iPhone?

    Yesterday, I upgraded to IOS 5.  Before I did, I "backed up" my iPhone per instructions. Now all my music is gone. Including my ringtones. The only instructions in Apple's forums is "hey, don't worry, bud, all of that music you purchased for iTunes i

  • How do you pass a variable from one form to another

    Sorry, I am new at this. I have an ID on one form and I want to pass it to another form and then populate a text field on the second form. How is this accomplished.

  • Snapshot problem

    hi, i want to replicate between two databases of different servers. i want to run reports on 2nd server. for this,i implement snapshot on 2nd server. i get the data well but there are extreme performance problem. when i run report on 2nd server(snaps

  • Which table stores the condition values of a purchase order line item?

    Hi, Please let me know the table that stores the condition values of purchase order line items(when we click on conditions tab after selecting an item then we can see the condition types and there is a corresponding condition value for that condition