Mobile Me was my default email account, so if I did any emailing like trying to send a photo directly from iphoto it would send from the mobile me address. Is there a way to set a different default email account now that mobile me is gone?

We used Mobile Me for our default email. So if you answered an ad from a site or tried to send a photo directly from iphoto, it would use the mobile me account. Now that its gone, can I set a different address as my default?

WEll, MobileMe has been moved & still works in iCloud.
Did you setrup an iCloud account?
Do not delete the old account yet. sign up for an iCloud account if you haven't.
MAKE A NEW ACCOUNT - DO NOT TRY TO ALTER YOUR EXISTING ACCOUNT.
I understand .mac mail will still come through. Do not delete the old account yet.
You cannot use .mac or MobileMe as type of Account, you have to choose IMAP when setting up, otherwise Mail is hard coded to change imap.mail.me.com to mail.me.com & smtp.mail.me.com to smtp.me.com, no matter what you try to enter.
iCloud Mail setup, do not choose .mac or MobileMe as type, but choose IMAP...
On second step where it asks "Description", it has to be a unique name, but you can still use your email address.
IMAP (Incoming Mail Server) information:
• Server name: imap.mail.me.com
• SSL Required: Yes
• Port: 993
• Username: [email protected] (use your @me.com address from your iCloud account)
• Password: Your iCloud password
SMTP (outgoing mail server) information:
• Server name: smtp.mail.me.com
• SSL Required: Yes
• Port: 587
• SMTP Authentication Required: Yes
• Username: [email protected] (use your @me.com address from your iCloud account)
• Password: Your iCloud password
Also, you must upgrade your password to meet the new criteria: 8 characters, including upper and lower case and numbers. If you have an older password that does not meet these criteria, when you try to setup mail on your mac, using all of the IMAP criteria listed above, it will still give a server error message. Go to http://appleid.apple.com then follow directions to change your password, then go back to setting up your mail using the IMAP instructions above.
Thanks to dpepper...
https://discussions.apple.com/thread/3867171?tstart=0

Similar Messages

My wife and I both have the new iPhones. Is there a way to set up two separate iCloud accounts but have photo stream from both phones sync with one family mac? So we don't want to share contacts or anything else, just photos... Thanks in advance

My wife and I both have the new iPhones. Is there a way to set up two separate iCloud accounts but have photo stream from both phones sync with one family mac? So, we don't want to share contacts or anything else, just photos... Thanks in advance

If you turned off Contacts wouldnt that mean that the Contacts would no longer be backed up to iCloud as well? That would make it a pain when upgrading a phone to not easily pull contacts back down.

I do not want the learner to be able to click through the project until they hear the audio recorded on each slide, however I also would like them to have click to advance to the next slide. Is there a way to set up these 2 functions together?

I do not want the learner to be able to click through the project until they hear the audio recorded on each slide, however I also would like them to have click to advance to the next slide. Is there a way to set up these 2 functions together?

I don't like that approach for adult learners, cannot refrain from mentioning that.
Don't use a playbar but create custom navigation. You'll need a next button on each slide that appears after the audio (in timeline). Since slides will not all have the same duration you'll need an individual button per slide, a shape button on master slide or timed for the rest of the project will not be possible.

HT204370 I tried to download a movie on my iPad but it didn't work... Is there some way I can access it on my computer now to download it? When I go to purchases in my iTunes it doesn't come up :-/

I tried to download a movie on my iPad but it didn't work... Is there some way I can access it on my computer now to download it? When I go to purchases in my iTunes it doesn't come up :-/

I tried to download a movie on my iPad but it didn't work
Could you walk us through what happened when you downloaded the movie?

Is there a way to set two different settings for the backlight?

I was wondering if there is a way for me to set the backlight to always on when watching videos on my 5G 30 gig iPod and off when doing anything else?
Or do I have to manually go in and change the setting everytime?

The backlight will always be on when watching videos. This is automatic, regardless of the setting.
btabz

I am trying to download osx mavericks but it is taking too long through the App Store. Is there another way to download it

Can you reply ASAP

It is ONLY available thrugh the Mac App Store. Yes, it is a big file, 5.29 GB. How fast depends on your ISP.

How to set a different default font

Is there a way to set a different font other that Myriad Pro as the default font so that you don't have to continually reset it for every field or label???

During import, Designer attempts to match fonts in the PDF file with fonts that are available on your computer. If the file contains an unavailable font, Designer displays a dialog box showing the missing font and a suggested replacement. You can accept the replacement font or change it.
This font substitution is not permanent. Designer must map the unavailable fonts every time the form opens. You can make the font substitution permanent by selecting File > Save As and then selecting Permanently Replace Unavailable Fonts before saving the file. This method is recommended for permanently substituting fonts.
You can also set up a font-substitution table in the file ConvertPDF_FontMap.txt in the Designer installation directory. If you add a font-substitution rule to this file, all occurrences of the substituted font are changed to the new font when you import a PDF, regardless of the font-mapping table and regardless of whether the substituted font is available on your computer.
ConvertPDF_FontMap.txt is empty by default. Each entry you add should have the following syntax:
input_font=Designer_font
where input_font is the name of the font used in the input PDF file, and Designer_font is the name of the font that is installed on your computer. Asterisks (*) represent wildcard characters. For example, the string *Cour* refers to all font names that contain the string Cour. Question marks (?) represent single-character wildcards. Adding wildcard characters before and after the input_font name accounts for any slight variations in the name of the font in the form. For example
*Arial*=Arial
*Helv*=Arial
*Cour*=Courier New
*=Times New Roman
Processing occurs in descending order. The last line in the example converts all remaining fonts to Times New Roman.

When I sync my iPhone 5 to Outlook 2010, the email addresses that I have listed as Email 1 for any given contact in my iPhone will be automatically moved to Email 3 in the Outlook file. Is there a way to fix this?

When I sync my iPhone 5 to Outlook 2010, the email addresses that I have listed as Email 1 for any given contact in my iPhone will be automatically moved to Email 3 in the Outlook file. Is there a way to fix this?

iCloud email supports 'plus' addressing. http://en.wikipedia.org/wiki/Email_address#Address_tags
So your friend could just add '+research' to the username part of your email address, and you setup a rule at icloud.com to put all emails sent to that address into a particular folder.
For example:
[email protected]
There's no way to do it without rules on the server though.

Is there a way to make two different text fields be "either or" like a "yes no" check box?

I'm have Acrobat 9 Pro on a Mac running Yosemite.
I have two text fields that each are formatted to have a number entered, but the user chooses which to fill out — either "number of weeks" OR "number of months" (two separate text fields). I don't want them to fill out both fields, only one of them.
Is there a way to set up these two text fields so that only one can be filled out? (Sort of like when you have a "yes" and "no" check the box field, you name them the same but have different export values?)
Thanks for any help provided.
~ bexterinni

Only by custom JavaScripting.

Is there a way to set an email mailbox so that mail from many months are stored, but the general default for the other mailboxes is a few days?

Is there a way to set an email mailbox so that mail from many months are stored, but the general default for the other mailboxes is a few days?

The only thing I can think of is to set the number of days to sync messages, shown below. But I'm not sure if this is what you're after. If it is go to Settings > Mail, Contacts, Calendars select the email account you wish to change.
This will then only sync emails from the last week for example. In the screenshot all email messages would be synced to the iPhone.
Message was edited by: Michael Bratley

I want to use Mac Mail for my work email address, which containts multiple outbound options (i.e. hr@, me@ etc). Is there a way to set up Mac Mail to have an account with multiple outbound addresses rather than adding in multiple accounts?

I want to use Mac Mail for my work email address, which containts multiple outbound options (i.e. hr@, me@ etc). Is there a way to set up Mac Mail to have an account with multiple outbound addresses rather than adding in multiple accounts?

This sounds like the age old problem with keychain & Safari. I don't know of a way to solve it without using something like 1Password.
The iOS app has it's own built in browser, so it has more control over what gets autofilled. Safari on OS X has an 1Password extension that handles account selection & autofill etc.
Keychain is great in principle, but it quickly falls down when you need tight integration with many ID's & different use cases (work, home etc).
I'd suggest you submit feedback to Apple about your thoughts. I did so years ago about this issue & this is how far we have come (back to the point where me.com synced passwords) :^)
http://apple.com/feedback/macosx.html
Other tools like lastpass or keypassx may also help if you want to truly segregate password storage, but that doesn't fix autofill, the way around that issue is to dedicate one browser for work.

When i need to send somthing to an email address from a website, the Outlook Express pop up even i do not set it as default's email

When i need to send somthing to an email address from a website, the Outlook Express pop up even i do not set it as default's email

http://support.mozilla.com/en-US/kb/Changing+the+e-mail+program+used+by+Firefox

Is there a way to set which keychain item is used by default for a site/application?

This question applies primarily to the keychain in Mavericks, but also the iCloud keychain and its use in iOS.
There are several sites and services for which I have multiple logins that serve different purposes. Whether it's because they are business/personal accounts, or accounts that pertain to different functions, I have multiple logins for many sites/services I use daily, however, there is usually one primary account for each that I use for most purposes.
What I would like to be able to do is set which of these logins appears by default. An example scenario might be if I have an "admin" account on a site, and a "dev" account that is used for testing purposes to Q/A the site from the perspective of a user who doesn't have administrative access. Most of my work happens under "admin" but whenever I go to the login page, the "dev" account prepopulates in the login form and I have to start typing admin and select that. It also does this on my iPhone, which is where this issue becomes very cumbersome, because there is no dropdown for me to select which credentials to use to autofill from. It appears to only allow autofill from whatever it sees as the first account to come up, and I can't seem to change that without deleting all the other keychain items that come up ahead of the one that I want. This kind of thing also poses a significant risk of accidents if, say, I have multiple payment methods saved and the one that comes up by default isn't my personal payment method, but a business account that's only meant to be used for business purchases. If that comes up first, if I don't replace it with my personal details, I might accidentally place a personal charge on a business account.
So I really have 2 questions:
1) Is there a way to set the priority order of which account populates a form by default from the keychain?
2) When filling out credentials on iOS, an "autofill" button appears at the top of my keyboard, and I can begin typing in a field and it will show the autocomplete of the username that I am typing, but if I click autofill, it replaces it with the original credentials and not those of whatever I began typing in. If I click on the username it's autocompleting, it just clears the autocomplete. Is there some way to choose which username I'm autocompleting a form with?
Thanks to anyone who has any ideas about a solution to this, and if there isn't, and if anyone at Apple is listening, in an ideal world, it would be like setting the priority order of known wifi networks, where you can drag your first choice to the top of the list.

This sounds like the age old problem with keychain & Safari. I don't know of a way to solve it without using something like 1Password.
The iOS app has it's own built in browser, so it has more control over what gets autofilled. Safari on OS X has an 1Password extension that handles account selection & autofill etc.
Keychain is great in principle, but it quickly falls down when you need tight integration with many ID's & different use cases (work, home etc).
I'd suggest you submit feedback to Apple about your thoughts. I did so years ago about this issue & this is how far we have come (back to the point where me.com synced passwords) :^)
http://apple.com/feedback/macosx.html
Other tools like lastpass or keypassx may also help if you want to truly segregate password storage, but that doesn't fix autofill, the way around that issue is to dedicate one browser for work.

Is there a way to set a default "Source Range" in AME when exporting from Premiere Pro CC?

When exporting a sequence from Premiere Pro CC, you are able to toggle between 4 drop down options within Adobe Media Encoder on what Source Range you'd like to export (Work Area, Sequence In/Out, Entire Sequence, Custom) as seen here:
Is there a way to set the default Source Range to something besides Sequence In/Out?
My reason for asking is that sometimes I export multiple sequences at once using AME's Queue. I add my custom presets to each Sequence and hit export, but SOMETIMES I may have accidentally marked an in point on my timeline and by default it's set to export only that In-to-Out part of the sequence.
I know what you may be thinking...well, just don't add any In/Out points to your sequence on the timeline or clear them first. The trouble is that I often don't see them or catch them when working quickly. In Premiere Pro CC, I use the "Lighter Brightness" Appearance setting because it's easier on my eyes after editing 10 hours a day, 6 days a week. Sure, darker looks cooler, but it kills my eyes for some reason. Anyway, PPro CC has a troublesome appearance issue in CC where it's not "optimized" for editing when you change it to a lighter appearance like it was in CS6. I've already contacted Adobe about this and another appearance issue (involving highlighted clips when in Lighter Appearance setting) and they are "actively working on fixing this appearance issue asap".
For reference, here's Premiere Pro CC in/out points in default dark appearance (notice the slightly lighter grey area):
Now here's that same in/out in "Lighter Appearance":
Not exactly optimized. Can hardly see it. Good luck spotting that little guy on a long timeline. Sadly, this affects in/out points in the Source Window as well. Really hard to see.
Conversly, CS6 looked the best (the blue REALLY stands out making things easy to see):
So my question again...is there a way to set the default "Source Range" to something else besides Sequence In/Out so that I don't end up doing what I just did and leaving for several hours while batch exporting only to come back and find that I exported only a "portion" of one of my big sequences?
Thank you!

shooternz wrote:
Here is the solution: Slow down. Give your project some love. Smell the roses.
Agreed about the roses but alas my next project always calls. Actually, I think what happens is I give each project SO much love that when it comes to exporting, I've run out of time.
shooternz wrote:
Then it would not be a default...it would be an option and you already have that option.
Semantics aside, I would love to be able to have it at least default to whatever option was last chosen. Or, perhaps I shouldn't use the word default again...I'd love it to simply remember my preferred setting. That's all.

Is there a way to set the default level of keyframe easing?

I'm currently using the graph editor to smooth my ease-in / ease-out keyframes with 100% influence. I'm having to adjust the easing of each keyframe individually.
Is there a way to set the default level to 100%, so that I can just select "Easy Ease In" and have it apply without having to go into the graph editor? It would save a lot of time.

No, there's not a way to do that, but it's a good feature request. You can submit feature requests here:
http://www.adobe.com/go/wish

Mobile Me was my default email account, so if I did any emailing like trying to send a photo directly from iphoto it would send from the mobile me address. Is there a way to set a different default email account now that mobile me is gone?

Similar Messages

Maybe you are looking for