Mobile messaging types...
Hello everyone,
I have a little question for you...
I have lately managed to send a file from a pc to a mobile phone, via Bluetooth (in Java). Now, I want to send the file as mms message. Does anyone know how I can do it?
So far, this is the way I'm sending the file (the last part of the bluetooth procedure):
ClientSession clientSession = (ClientSession) Connector.open(connURL);
HeaderSet hdrs = clientSession.createHeaderSet();
HeaderSet hsConnectReply = clientSession.connect(hdrs);
int response = hsConnectReply.getResponseCode();
HeaderSet hsOperation = clientSession.createHeaderSet();
hsOperation.setHeader(HeaderSet.NAME, "Hello.txt");
hsOperation.setHeader(HeaderSet.TYPE, "text/plain");
byte data[] = "Hello world!".getBytes("iso-8859-1");
OutputStream os = putOperation.openOutputStream();
os.write(data);
os.close();
putOperation.close();
clientSession.disconnect(null);
clientSession.close();This file is not even recognized as sms by the mobile, which refuses to open it without any third party program.
What can I do? How can I send it as SMS\MMS?
Thank you.
Anyone?
No one knows? :(
Similar Messages
-
Removing message type tag in output file
Hi guys,
I'm new to XI. I have done an xml file to xml file scenario. It is working successfully
The output file has a format
<?xml version="1.0" encoding="UTF-8"?>
<ns0:mt_xml_receiver xmlns:ns0="http://xml2xml">
<DETAILS>
<ID>111</ID>
<NAME>Varun</NAME>
<LOCATION>India</LOCATION>
<ADD>Bangalore</ADD>
<MOBILE>46572727</MOBILE>
<EMAIL>[email protected]</EMAIL>
</DETAILS>
</ns0:mt_xml_receiver>
I want to remove the additional tag present for the message type and i want the output in the format
<?xml version="1.0" encoding="UTF-8"?>
<DETAILS>
<ID>111</ID>
<NAME>Varun</NAME>
<LOCATION>India</LOCATION>
<ADD>Bangalore</ADD>
<MOBILE>46572727</MOBILE>
<EMAIL>[email protected]</EMAIL>
</DETAILS>
Can any one help me on how to achieve this???
Pl help me on this guys
Regards
VarunHI Varun,
This will help you..
In the message type <b>mt_xml_receive</b>r there is a box where the namespace name is specified.
Simply delete the same and activate the message type.
In your case what you can do is as you dont want the message type name also.
you can create the message type name as DETAILS instead of mt_xml_receiver.
Regards,
Sumit
ps : reward points if tht helped u. -
Presetting of messaging type in SIM card
I have two Nokia models, one N73 and two 2323 Classic. In both, message type i. e. SMS or MMS, is selected during writing the actual message.
Can anyone tell me if there are Nokia models where the message type can be preset from the SIM card?
Although it is hardly relevant in a Nokia forum, I also try to find out if other mobile brands can support such a feature. So if anyone knows,please tell me!I'm not sure if that is in anyway linked to you sim card.
If you want to go straight to typing an sms, you can press the left navigation key(fairly standard Nokia shortcut which should be preset on both those phones)
you can change this shortcut to MMS from your shortcut settings.
If you for instance don't want to be able to send MMS then you can have your operator disable this(They might not all be able to do this), Removing the acces point (N73) or MMS settings(2323) could also work
Show your appreciation. Hit that kudos button real hard -
Good Mobile Messaging Contacts not fully integrate...
I have recently switched from a Treo 650 to a Nokia E61 with Goodlink software. Everything works perfectly apart from the Goodlink software is not in sync with incoming calls. I have found the following FAQ on the goodlink website http://www.good.com/faq/17803.html I am unable to find the option "Copy to Nokia contacts” feature within Good’s menu item to copy a Good contact to the native Nokia contacts database.." as suggested in FAQ 17803. Does anyone know how to do this please. If so could you be so kind to provide me with a step by step instructions on how i do this please. Thanks in advance John
If you want to check that you have the latest ROM (at the time of writing this is only available to unbranded Nokia devices AFAIK) type *#0000# whilst in the standby screen. Mine appears as: "3.0633.09.04 20-11-06 RM-89 Nokia E61"
The latest Good Client is v4.9.2.30. You can check this by hitting 'G' in any Good application to go to the launcher screen, then hit 'H' to go to preferences, then Click 'About...', version info will be at the top. If you don't have this then speak to your Good Administrator and get them to push it out to you).
Some of the improvements you should see if you have the latest Good Mobile Messaging client and latest ROM are:
CLI - Incoming calls are identified by contact if that contact is present in the Good Contacts database
SMS - Incoming SMS/MMS messages identified by contact, Outgoing SMS/MMS can use contact name in 'to:' field and lookup will run against the Good Contacts database
'Add to Contacts' adds to Good Contacts
Selecting 'New Message'/'Create Message' in 'Messaging' give 'Good Messaging' as an option
Home Screen - Native calendar is no longer displayed on the standby screen (this removes the erroneous 'No upcoming appointments' message)
Local 'PC Suite' sync - This is disabled (just sync, not backup etc.) so as to avoid conflicts, duplicate contacts, etc. in Outlook
As a side note, if you wish to display an inbox such as your SMS inbox on the active stanby screen you can do this by going to:
(Nokia applications) Settings-->Phone-->Standby Mode-->Active Standby Mailbox. Choosing 'Inbox' sets the device to display your SMS messages on the Standby screen
KittMessage Edited by damocles on 09-Jan-2007
12:32 PM -
Blocking mobile messages from certain mobiles.
Can anyone tell me how to block mobile messages from a certain mobile source?
Regards,
Charlie Blank
[removed personal information]
Message Edited by dany_s on 11-12-2008 08:08 PM
Solved!
Go to Solution.Hi and welcome to the forums!
You can block in one of two ways:
1) You call block select types of text traffic. Go to OPTIONS/SECURITY/FIREWALL.
You can select the type of message traffic to block. This will however block all incoming messages for that
category. Example if you block SMS traffic, SMS messages from everybody will be blocked
2) You can call the carrier and have the number blocked as spam. Depending on the amount of messages,
you may be able to get the carrier to remove the texts from your bill.
2a) If you use AT&T as a carrier you can block and control messages from the link below. I do not know
if other carriers offer this service.
http://mymessages.wireless.att.com/do/mail/settings/sendersControl
Thanks,
Please remember to resolve your thread. Put the check mark in the green box that contained your answer! Thanks
Click Accept as Solution for posts that have solved your issue(s)!
Be sure to click Like! for those who have helped you.
Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure. -
Inutilização de NFe: Log de erro Message type 8 is not defined
Olá Pessoal,
Estamos com um erro aqui muito semelhante ao descrito na Thread: [Skip número da NF não autorizada|;.
Solicitamos a inutilização de uma nota writer de saída que foi barrada no Monitor GRC por erro de validação e por isso estava com status 8 na J1BNFE (ECC). A inutilização foi feita com sucesso, o status no GRC está correto, mas no ECC a autorização ainda não constava. Executamos o report XNFE/UPDATE_ERP_STATUS_DIAL e ao fazermos a msg de "erro ao atuzalizar ECC". No monitor da J1BNFE a nota agora aparece com o seguinte log de erro:
Message type 8 is not defined
Message no. J1B_NFE018
Diagnosis
The messaging system passed a value for the message type to the back-end system (field I_MSGTYP) that is not defined in the back-end system.
System Response
The back-end system cannot interpret and process the inbound message.
Procedure
Configure the messaging system in a way that it transfers only allowed message types to the back-end system via the inbound interfaces J_1B_NFE_XML_IN or J_1B_NFE_XML_IN_TAB.
Achei a thread mencionada acima com o mesmo erro e verifiquei a aplicação das notas, já que o problema foi solucionado com a aplicação das mesmas. Eis os status:
Nota 1298283 (ECC) - Não relevante pois estamos no ECC 6.0 SP17;
Nota 1376324 (ECC) - Não relevante pois estamos no ECC 6.0 SP17;
Nota 1413636 (ECC) - Completely Implemented na SNOTE;
Nota 1376901 (GRC) - Não relevante pois estamos no GRC SP13.
Aparenmente alguma coisa ainda está faltando.. mas nao sei o que é.
Desde já agradeço,
Daniela MachadoVerifique esses passos da nota 1298283 (no ECC)::
Change Domain J_1BNFE_MESSAGE_TYPE
Use transaction SE11
Select Domain and insert name J_1BNFE_MESSAGE_TYPE
Push Change.
Select Tab "Value Range".
Insert
Fix value Short text
8 Authorization to Skip a NF-e with Validation Error
9 Rejection to Skip a NF-e with Validation Error
Maintain table J_1BNFE_MAP_TYPE
Use transaction SE16 and display the table entries.
Push CREATE (F5)
Insert records
MSGTYP DOCSTA SCSSAT
8 Space A
9 Space B
At.,
Bernardo Braga
Edited by: Bernardo Braga on Jul 1, 2010 10:06 PM -
Message type BOMMAT (change BOM)
Hello Guru,
I have some question and need help, when i try a standard transaction CS02, try to change a BOM material existing for example, the base quantity of the BOM was 650, i enter new data as 655, but suddenly retain the original Qty as 650 and save the changes as SAP will accept the changes i've done (BOM for material 2456 changed) but eventual i have not change any value to the original BOM. SO it mean this is standard SAP funtionality for CS02.
But when we use an interface using message type BOMMAT a standard SAP message tpye, we have created an IDOC using this message type and same data as the original was maintain to it, to be more exact we plan to change a BOM thru this IDOC but all the data we have is the same value of the original BOM, so we expect no error could be encounter of this IDOC since in standard CS02, changing of BOM even same value was inidicated did not had error message encountered when saving.
But thru our process, when we try to process the IDOC with message type BOMMAT in program RBDAPP01 (BD20) the idoc did not pass it when into status 51(Error when saving BOM. Please see the application log.) and when we check the BOM it has duplicate value upon executing the program we able to fix it when we delete the duplicate line segment in the IDOC and reprocess it once again.
my question is why in standard message type BOMMAT had encountered error when processing when we try to make change of BOM even the same value is carried out by the IDOC, and why in standard CS02 saving a change of BOm with same value as it is SAP accept the process? Please help and clear the process.
Any inputs R.Brahamankar and Vivek
Thanks
Edited by: Ryan on Feb 9, 2009 9:23 AMBOMMAT and process code BOMM
-
Idoc and message type not getting replicated in the receiver system
Hi
i have created a Z Idoc and didtributed the mode from system A ....I can see the distribution model in system B
However i cannot see the custom zidoc / message type in sys B.. Do i need to create the zidoc again in sys BHi Tarang,
at least ou need the required partner agreements and you should have a processing function for inbound IDoc. To implement this, the full definition of IDoc including Segment definition should be present in receiving system.
Just look at standard IDocs and do as they do.
Regards,
Clemens -
I really need help, I purchased an iTunes card about an hour ago and downloaded two things, I tried to download a couple songs but it won't let me, every time I try it says something along the lines of credit mismatch mobile message. How do I fix this? It says I have 23 dollars left but it's not working. How do I fix the problem? Please help!
its very annoying but you have to log out of your account. than try to buy the sone. it will ask you to sign in. do it. the sond will start to download. it only works once, so you have to do it over and over for every song :/
-
Idoc message type for open orders & Open JIT lines
Hi,
I need to send Open Purchase Order data and Open JIT lines data to supplier daily via Idocs.
Is there any standard messege type available for this data.
RegardsHi Rohita,
Instead of changing the standard domain, You have to make the changes in the User Exit.
Say Qualifier 001,002,003 were already there in the domain.
001--Purchase Date
002--Delivery Date
003--Ordered Date
In the user exit u have to just add the segment and the qualifier without making any changes to the Standard Domain.
These Qualifiers are just like other variables and u can add whatever values to them that u want..
You can add Qualifier 004 for Trnasportation Date or Goods issue date and have to communicate the MiddleWare informing that date with this Qualifier will be Transportation Date and they will do the mapping to the corresponding field in other syste.
You can have as many message types as u want for the same IDoc type. There is no harm in having multiple message type. And u dont need to change the standard domain. It can be done without changing the domain.
If u analyse the FM closely u will realise that they have done coding for those values in the domain.
So instead of adding it to domain u just have to do the coding for this new qualifier.
Revert back if u need any help on it.
Thanks...
Message was edited by:
Utsah Garg -
How to connect our outbound function module to the message type
how to connect our outbound function module to the message type any transcation code exits to assign the message type with the function module .
Thank in advance .
A. ThiruHi Thiru,
Standard Transaction Codes, have their own Function Modules for generating Outbound/Indbound Idocs. Where these Function Modules will be configured to a particular Process Codes.
For E.g for PO's
Process code : ME10 - IDOC_OUTPUT_ORDERS - for creation
In case if its a Z Function Module, It depends on the case how you use IDOC types. either directly through Z Program or through Inbound/Outbound Process codes with respective Function modules.
Regards,
Anbalagan -
IDOC Message type for open sales orders
Hi
We are trying to send the list of open sales orders of a customer in an IDOC to the customer. For example, if the customer has got 15 sales order to be delivered to him , he needs the details of all these 15 orders in an single IDOC
Is there any message type available for this in SAP R/3 4.7 version
Regards
AnandhTry VA05 schedule lines standar variant...include status fields and both ordered qty and confirmed qty. In SAP standard system order status, status A means open orders fully (Nothing shipped, everything opened). Status B means in process orders (Partially processed - shipped). Status C means complete orders (Nothing opened). As there is no delivered qty in VA05, you need to download to excel the file and calculate the difference between both qty fields for each A and B status. That is a way to get the missing qty to be delivered or open qty as you stated.
Hope it helps.
Jorge Fernandez -
Change sales orders using ORDCHG Message type
Hi,
I am trying to test the changing of quantity on sales order items using message type ORDCHG and process code ORDC. In segment E1EDP01 the action code is set to 002 - item changes. However when the IDoc is posted a new line is created in the order rather than the existing one being changed. The action code in the header is set to 003 - one or more items changed. Does anybody know how to control the change of quantity for an existing item?
Many Thanks
CarolineHi,
Try to populate Logical message code 'CHG' in the EDIDC-MESCOD while you are creating the IDoc.
If a message code has been entered in the (inbound) partner profiles, the external system must fill the field during IDoc inbound processing.
Regards,
Yogesh -
Idoc Message type for Scheduling agreement
Dear Experts,
How to configure to create Idoc for Scheduling agreement (not the releaseed schedule lines) ?
I am trying to use message type ORDERS05 but it is not working.
Will any body guide me preferably step by step process for this ?
Thanks in Advance,
Best Regards,
RajuHi Anji,
Thanks for the Reply. But i think ORDRSP is for Order Confirmations.
But I have to send Outbound Idoc for a Schedule Agreement.
Whether the same Idoc type & Messge type used for SO/PO(e.g ORDERS05, ORDERS/ORDCHG) can be used for Scheduling Agreement.
Please Advice.
Regards,
Anbalagan -
Message type for Scheduling Agreement - Outbound IDoc
Hi All,
I have to create an Idoc for Scheduling Agreement through a Z program based on some conditions. I have bit confusion, whether i can use Idoc type for Orders(e.g ORDERS01..05) & Message type ORDERS / ORDCHG to generate Outbound Idoc.
Already there is process code for for ORDCHG mappig IDOC_OUTPUT_ORDCHG & ORDERS mappig IDOC_OUTPUT_ORDERS. Whether there will be any impact on this.
Appreciate your help.
Regards,
Anbalagan.Hi Anji,
Thanks for the Reply. But i think ORDRSP is for Order Confirmations.
But I have to send Outbound Idoc for a Schedule Agreement.
Whether the same Idoc type & Messge type used for SO/PO(e.g ORDERS05, ORDERS/ORDCHG) can be used for Scheduling Agreement.
Please Advice.
Regards,
Anbalagan
Maybe you are looking for
-
Macbook Air 2011, trackpad clicks but pointer doesn't move.
Hi, I have got a mid 2011 Macbook Air. It's trackpad is not responding, besides clicking any object on the screen it doesn't do anything else. The trackpad can't move at all for some reason. And I know for a fact that it's not the trackpad itself as
-
I'm currently on OS 10.6.8 on my mac book pro. What do I need to do get Lion to install?
-
Is anyone else getting this really annoying iCal message? I started receiving it this morning and have seen several others on here asking same question-any action from Apple?
-
Hey All, I receently added a 2nd movie to the "movie" page of my iWeb. Now when I go into iWeb and selct that movie page, iWeb completey shuts down and crashes and it prompts me to send a report to Apple. Can anyone tell me what's wrong or an altertn
-
Implementing the Toy Demo Jdev 9.0.2
I want to implement the business objects and data access packages from the Toy Store Demo in JDev 9.0.2, but there is a significant difference in the libraries in the two different versions. Any ideas how I over come this?