Mobile mp4's video clip playback

does anyone know how to enable mp4 video from a mobile handset playback on the computer?
trying to get clips from sony erricson p910 to play leaves me with a black screen but with sound and some random blocks of colour.
I managed it before on a g4 system but cannot for the life of me remember.
vlc of course plays them and i have added all sorts of div x and other codecs, yet as mp4s it would be nice if they just palyed out of the box.
thanks

I logged out and logged in as a different user. I fired up FCPX and imported the same event file from the book.
It did not freeze once during playback.
I then imported one of the clips (.mov) I had imported from tape. Again, no problem whatsoever.
I removed any applications launched during log-in and logged in as normal, launched FCPX and it still exhibited the same problem with freezing.
Since all of the media is on the same (RAID 10) disk and the only difference is the account I've logged in with, it appears that there is a process running under one account that is responsible for the momentary freezing. If I find what it is I'll report back.

Similar Messages

  • N73m - Geeting mobile icon on video clips

    Hi,
    Could you please help me out to know - why I am getting a mobile icon as well as message (envelope) icon on some of the video clips which i have taken recently from my mobile camera only.
    What is the meaning of those icons and how i can rid of it.
    Please reply soon.

    Usually that icon indicates that a particular media file is not fully or supported. As it may only playback audio part but not video. But it's weird that you said it was taken by the phone itself. Um, usually I experienced this kind of problem when a particular videos saved from PC that has improper codec settings.
    As asked by Mr. Coopere, have you able to play the videos?
    Thanks.
    Message Edited by n73me on 09-Feb-2008 02:39 AM
    Firmware: V4.0812.4.2.1
    Nokia N73 (12) RM-133 Product Code: 0539346

  • PS cs4 extended...audio during editing... No audio in rendered video clips playback??

    Hi I am running Cs4 Extended using PS on a 64 Bit Win 7 computer.  I am able to import video and edit it and the audio is there while editing.  But no matter what I do when rendering the video clips I get no play back audio just the video.  I just loaded onto this new computer I know I did video on my old computer with no problems.  is there a default setting that is blocking the audio to be rendered with the video.  Thanks for any help.

    OK so I took the edited PS video file from my new computer and saved it over to a Drive, then opened the same PS file onto my older 32 bit computer. 
    I made no changes to it at all and just did a RENDER VIDEO.
    it has the sound from that computer.  This tells me it is a very simple problem somehow can any one tell me what to try.  Thanks for any help.

  • Video Clip Playback Problem

    when trying to run a video clip it starts over from the beginning after about 20 seconds. Any ideas?

    I am still struggling with the project and hope that you can help me further. I first converted the jpegs to psd files as they always displayed in the project panel and scene/timelines. Previously large batches of the jpegs showed offline status, only cured by clicking on the green button at the left-hand corner of the icon. This was very time consuming and out of curiosity-despair I converted to psd files.
    However when exporting to PC-Windows Media the process failed at the end (2hrs 40mins): Windows Media is out of memory. I have 4GB of RAM, the project is just over 3GB in the exporting dialogue box. I viewed the scratch disk dialogue box and approximately 240GB  (C: drive) is allotted to the various parts of the project.
    I bought an extra 4GB of RAM but for some reason it won’t work in my processor; when I switch on there is a ‘no signal’ message on my screen. If I remove the native RAM and substitute the new RAM the result is the same. I will ask the store to run a check on the new RAM if that is possible.
    I read your (Bill) article relating to downsizing jpegs to 1000 x 750 pixels. I batch processed them in Photoshop and gave them a try. I rendered the project before exporting. Why is it rendered a second time when exporting? The result was the same: windows media is out of memory. I deleted a batch of video clips but the result was the same. I exported to DVD and again it was the same.
    The only transition that I use is the two second of cross fade. The project contains approximately 400 jpegs and 40 video clips (.mov format, 29fps 720). In most cases I have split the clips and applied the transition. In the majority of clips I adjusted brightness and saturation, and applied titles to some. I was intending to add audio, music tracks, to the project but it looks like I will need to dream on.

  • Self-made video clip does not play completely on website

    I have a short video clip [1:22 minutes/40.6 MBs] taken using my Canon Sureshot camera and mounted on one of my webpages. It plays fully in iWeb's publishing site but after uploading it to my domain host's internet, the video only plays half way. The play icon moves but there is no advancement of the clip or sound.
    I contacted the domain host provider and they have not been too helpful other than to suggest uploading to YouTube in order to get a weblink. I would prefer the video clip on the page rather than a weblink.
    There is speculation my web space is full to capacity, but it has not been verified. If there is enough web space, what is the key factor I should know to have this video clip playback in its entirety once it has been uploaded to the internet. My FTP program indicates it has been uploaded successfully in the Directory, Media, Scripts and Hypertext files.
    I'm not a high-level techie, but still want to have videos on my website as I see on many others. It may mean upgrading for more web space. Before I do, I thought I would check it out with the support group to see if there is a solution to uploading successfully a video clip to play in its entirety.
    The webpage link is: http://thebigbenmemorialtrail.ca/New_Scouting_Team.html — the video is still mounted for the purpose of my seeking help.
    Many thanks, in advance.

    Thanks, Old Toad,
    I know what you are referencing. I just never go to that folder but that is where I do publish the site prior to uploading it onto the internet using the FTP.
    And, it is when I have published the updated pags to the the Local Folder, the video plays perfectly well.
    Soooo, it must be all about restricted bandwith that I am currently using with my domain web host ISP, which is a shared bandwidth. Economics affect me as a volunteer therefore cannot afford the higher speed which is not a shared bandwith.
    To add to my demise, I have issues with signing on to YouTube through my Google account. Try to sort that one out is impossible. Tried for hours but all to no avail to get signed in. So I can't upload my videos which is too bad for my website.
    Will chat further with my domain host and see what other options are available to me.

  • Where can I download short mp4 video clips to put into garage band for my students to put a soundtrack to?

    Where can I download short mp4 video clips to put into garage band for my students to put soundtracks to?

    Theres a program called Bluestacks app player which when installed gives you an Android enviroment to be able to download apps etc and use/play them on a Pc from this you can then install an app which can create a backup of the app in apk format for transfer to a mobile or tablet etc for installation via your file manager app
    For a successful technology, reality must take precedence over public relations, for Nature cannot be fooled.   Richard P. Feynman

  • Creating video clips from MP4 movie

    Can anyone recommend a piece of software that will allow me to capture pieces of an mp4 movie and save them as clips for use in iMovie projects?  I have converted some analog video Hi8 vacation movies to digital mp4 format.  The problem is that the end result of the conversion is a 60 min movie with no breaks in it.  I would like to select pieces of the movie, save them to a folder and be able to use them as video clips in iMovie projects.  Trying to work with a 60 min movie as opposed to individual clips in iMovie is proving to be impossible.  Any suggestions on how to do this would be greatly appreciated.  Thanks.

    What you don't want to do is compress more than one time. So the best way to do this is choose file/export/QuickTime Movie... then choose use current settings and include audio and video if both are needed. Also check on "Make movie self contained". This is a single QT movie of your short videos... and it is of the highest quality possible. But it's a large file compared to what you've been suggesting. However... it will end up being compressed to flash and that final should look better because you didn't compress it twice.
    That said, it's really making sense to me for YOU to make the flash movie directly from your edit station... You'll need either Flash pro, or Sorenson Squeeze or Episode Pro to do the best job of this. That way you're only compressing one time too.
    Jerry

  • Entire frame of mini-dv video clips do NOT show in the iMovie '11 viewer in playback mode

    I am editing a wedding video in iMovie11 that was recorded on a mini dv tape.  When I move video clips from the event library to the timeline, the entire frame is displayed in the timeline.  However, the entire frame of the video clip does NOT show in the iMovie viewer or when I playback the video.  I exported the video and burned it to a dvd using Toast 11 pro.  The video recorded to the dvd as it was showing in the iMovie viewer... the full frame does not show.  I would certainly appreciate any advice as to how to solve my problem.  THANK YOU!!!

    Is your video shot in 16:9 aspect ratio or 4:3?
    You can go to File/Project Properties and set the aspect ratio for the project.
    When you get a clip that does not match the project's aspect ratio, you use the Rotate, Crop, Ken Burns tool on the middle toolbar to specify how it should be treated.
    FIT will place the entire clip in the movie, and will letterbox (black bars) so that it fits.
    CROP will fill the screen, but will cut off the top and bottom of your frame.

  • User defines video clip order for playback

    I would like to have a site that has several vieo clips in a
    library where the user could drag and drop to a time line for video
    playback. I have seen this but am ot sure if it is a third party
    program or created rightin flash.
    For instance
    The user sees three short video clips and can view each one.
    They can then drag these to any orrd they want in a timeline and
    then view all three at once as a "complete video." can anyone
    suggest a way or a program for this? thanks, Chris

    "You can't" is the sad answer to this questioned topic.
    I wanted such a simple move yesterday in Flash, but was literally depressed to learn that you "can't" keyframe a move on a video clip in Flash. Shame on you Adobe! Today, as suggested in this , I am trying to get that same keyframed move in AE, and am failing because keyframes and the graph editor make NO SENSE!!!  So, in Flash "you can't", and now today in AFTER EFFECTS - "you can't either".......
    I've been producing broadcast 3D animation for nearly 25 years, and have produced some of the finest complex keyframing in Lightwave, Softimage and 3D Studio Max. I do realize that those are 3D programs, but a keyframe is a keyframe, and the defined functions of bezier vs linear in a graph editor should be consistant everywhere. There is no consistancy of keyframe usage and function WITHIN the Adobe family of animation softwares! Adobe - you lie by telling me that I can keyframe in After Effects - your keyframing is very difficult to manage and unpredictable - and your graph editor is an absolute joke, which deserves deletion! Oh you can keyframe in AE - ONLY if you just want to go from point A to point B with NOTHING ELSE.  Only 2 keyframes at a time, and don't you dare try to mix bezier with linear keyframes in AE either!,,,, lets keep everyone safe now, by keeping keyframing -constrained at Pre-School Levels please.

  • FCPX - instant playback of video clips

    Have just downloaded trial FCPX in order to speed up the importing of HD clips onto my Macbook Air - works a treat!
    However I now need to know how I can instantly playback the video clip full screen size and at the same time see the timer, as well as FF, PLAY, PAUSE, STOP and BACK controls so I can easily and quickly play certain parts.
    Many thanks

    Tom, the fact is I'm not sure.
    What I am looking to do is simply play back video clips from my camcorder as soon as they are imported to the laptop - I have no need to edit them. 
    When I play the clips, my clients need to view them on a large screen or projector in the room we are working in.  I attach the large screen to the laptop via an Apple miniport to VGA (sorry not RGB) adapter, then a VGA cable to the large screen.
    (I plug in speakers into the laptop for sound if the large screen / projector does not have speakers...)
    In an earlier reply you mentioned that the functionality I am looking for is not possible with one monitor, hence me describing in more detail about the use of a second screen / projector in the hope that might provide a solution.
    Thanks again

  • My E71 doesn't play any mp4 video clip

    hey guys, my E71 doesn't play any mp4 video clip.. Someone tell me what should i do? Plz guys... I'm waiting 4 ur reply.

    According to the Multimedia section at http://www.developer.nokia.com/Devices/Device_specifications/E71/ , your phone should support some mp4's.  But the solution is to get a better video player.  There is always Coreplayer, which is supposed to be very good, but which I have never used, and is not free.  A poster here /t5/Eseries-and-Communicators/Nokia-E5-viewing-videos/td-p/1160745 recently recommended the free Divx player.  Worth a try.

  • No audio on playback of imported mpg2 video clip while editing

    I was assisted yesterday by your technical support team to install the photoshop elements 12 & premiere elements 12 which I purchased e few minutes prior.
    while trying to work with the premiere elements 12, I realised that I have no audio  on playback of imported mpg2 video clip while editing.
    How can I solve this audio setting problem?
    <moved from downloading,installing,setting up - kglad>

    dovsolomon
    The Adobe Premiere Elements Forum is not Adobe. Just Premiere Elements users trying to help other Premiere Elements users with their Premiere Elements worksflows. If you need to re-contact Adobe, then please do so via the route that you used previously to contact it.
    If you want us to help you here then please continue reading....
    What computer operating system is your Premiere Elements 12 running on?
    Is the lack of audio in the Editing area of the program confined to this one particular MPG2 video clip?
    What are the properties of this video file? If you do not know
    a. perhaps the brand/model/settings of the camera that recorded the video might give us the information we need for troubleshooting
    b. if not, consider getting that information from MediaInfo (Tree View)
    MediaInfo - Free download and software reviews - CNET Download.com
    Just watch out for carry alongs in the download. The link is for the Windows version. A Mac version is available.
    Did you discover the loss of audio for the video file after you had created a narration clip with the program's Narration Tool?
    If you have not already, please check the settings under Edit Menu/Preferences/Audio Hardware and its ASIO settings (including Input and Output enablement).
    Please review, consider, and reply to the above. If you have questions or need clarification on any of the above, please do not hesitate to ask.
    Thank you.
    ATR

  • Playback problems and video freezes due to plugins being used on video clips?

    I am editing with Premiere, and dealing with playback issues and video freezes as I apply plugins to each video clip.  Not sure how to fix this problem.  I am a mac user, but I cannot upgrade my graphics card, so I am wondering how to fix this issue.

    Hi,
    More info will be needed to help. Please refer to this post.
    http://forums.adobe.com/message/4200840#4200840
    Thanks!
    Peter Garaway
    Adobe
    Premiere Pro

  • My video clips are freezing on playback after import

    I am currently working on a music video in premiere pro 5.5 but after importing the clips for editing, on playback, only the music keep playing but the video clips is slow or freezes

    More information needed for someone to help... please click below and provide the requested information
    -Premiere Pro Video Editing Information FAQ http://forums.adobe.com/message/4200840
    Exactly what is INSIDE the video you are editing?
    Codec & Format information, with 2 links inside for you to read http://forums.adobe.com/thread/1270588
    Report back with the codec details of your file, use the programs below... A screen shot works well to SHOW people what you are doing
    http://forums.adobe.com/thread/592070?tstart=30 for screen shot instructions
    Free programs to get file information for PC/Mac http://mediaarea.net/en/MediaInfo/Download
    Are you sure your video and editing sequence match?
    The NEW ITEM process will ensure that your editing sequence matches your video file
    CS5-thru-CC PPro/Encore tutorial list http://forums.adobe.com/thread/1448923 has a link to learn about the NEW ITEM process, including a picture to show you what to do

  • When I publish as an .mp4, the embedded .flv videos clip at the end

    I am using Captivate 6.0.1.240. I have .flv videos that were encoded using Adobe Media Encoder from a .mov file. The videos are embedded on the slide, as multi-slide synchronized video, but only distributed across one slide (as strange as this might seem, it is what was recommended to me because using Event Video resulted in choppy video).
    Now, the videos clip off a second or so before the end of the video. There are no transitions on the video slide or on the slide following it. I have tried extending the length of the slide beyond the length of the video, to no avail.
    What am I missing? How do I get the embedded .flv videos to play fully?

    Hi there,
    As you told you have checked that there is no transition on the Slide on which you have the video.
    Have you checked the transition effect on that video, whether Fade out only or fade in and fade out is selected. Select that multi slide video and click on the properties panel and check the transition on it.
    Also, if this video is on the last slide, check the fade in and fade out on the project. (edit > Preferences > Project > start and end)
    Thanks.

Maybe you are looking for