Mobile Node Information is missing
Hi, everyhing was working very fine, WDS is correctly authenticated, WLCCP credentials are correct and the "Security Keys Setup" message appears on the WDS APs. But after I made some changes from console and upgraded the AP using the templates of the WLSEE, now I can´t see the Mobile Node Information in Wireless Services > WDS in my browser of the active AP WDS.
All my AP have IOS version 12.3(4)JA, what do I have to do to view the Mobile Node Information via the browser??
Thanks for your help.
Does the mobile nodes have all ip address zero? just check with the command "show mobility mn"
http://www.cisco.com/en/US/products/hw/wireless/ps430/prod_technical_reference09186a0080362bd0.html#wp998980
Similar Messages
-
IPSec between Mobile Node - Mobile Router - Foreign Agent - Home Agent ?
At this moment, I will like to know if Cisco Mobile IP solution has the security feature that provides end-2-end VPN IPSec tunnel for Mobile Node -> Mobile Router -> Foreign Agent -> Home Agent ? Now, I know that FA-HA will either have IP- or GRE- tunnel, right ? Does this mean it already have got IPSec tunnel ?
Since there has been no response to your post, it appears to be either too complex or too rare an issue for other forum members to assist you, or there is no public information available at this time. If you don't get a suitable response to your post, you may wish to review our resources online at http://www.cisco.com/go/solutions. You may also contact our product information line at 1-800-553-NETS or a Cisco Systems Engineer at your local Cisco office or reseller. To locate your local Cisco representative, visit http://www.cisco.com/warp/public/687/Directory.shtml
If anyone else in the forum has some advice, please reply to this thread.
Thank you for posting. -
REJECT_CODE Vendor information and/or Operating Unit information is missing
hi
i am using Oracle Applications : 11.5.10.2.
i am trying to load suppliers and suppliers data into oracle AP.
i tried doing this with some sample data.
i executed the following code below :
insert into AP_SUPPLIERS_INT (VENDOR_INTERFACE_ID, VENDOR_NAME, SEGMENT1, STATUS)
values (*10006*,'XXX Financials2','199999','NEW');
i then ran the following process:
Supplier Open Interface Import
the supplier was added without errors
i then inserted a record into the
AP_SUPPLIER_SITES_INT table :
vendor_interface_id =*10006*,
LAST_UPDATE_DATE= SYSDATE,
LAST_UPDATED_BY ='123',
VENDOR_SITE_CODE = 'true test' ,
CREATION_DATE =SYSDATE ,
CREATED_BY ='123' ,
PURCHASING_SITE_FLAG= 'N' ,
PAY_SITE_FLAG = 'Y' ,
ATTENTION_AR_FLAG = 'N' ,
ADDRESS_LINE1 ='gmmm df' ,
ADDRESS_LINE2 ='gmmm dfdv' ,
ADDRESS_LINE3 ='gmmm dfvdd' ,
ADDRESS_LINE4 ='gmmm dfvdd' ,
PAYMENT_METHOD_LOOKUP_CODE='Check' ,
TERMS_DATE_BASIS ='Current' ,
ACCTS_PAY_CODE_COMBINATION_ID = '1365' ,
PREPAY_CODE_COMBINATION_ID = '1470' ,
PAYMENT_PRIORITY = '99' ,
TERMS_ID= '10001' ,
INVOICE_AMOUNT_LIMIT =20,
PAY_DATE_BASIS_LOOKUP_CODE = 'DISCOUNT' ,
ALWAYS_TAKE_DISC_FLAG= 'A' ,
INVOICE_CURRENCY_CODE ='JMD' ,
PAYMENT_CURRENCY_CODE ='JMD' ,
HOLD_ALL_PAYMENTS_FLAG='N' ,
HOLD_FUTURE_PAYMENTS_FLAG ='N' ,
HOLD_UNMATCHED_INVOICES_FLAG= 'N' ,
EXCLUSIVE_PAYMENT_FLAG= 'N' ,
EXCLUDE_FREIGHT_FROM_DISCOUNT = 'N' ,
ORG_ID= '142' ,
CREATE_DEBIT_MEMO_FLAG= 'N' ,
OFFSET_TAX_FLAG= 'N'
i then ran the following process:
Supplier Sites Open Interface Import
the process completes with a status of 'Normal'.
below is an extract of the output :
Supplier Sites Open Interface Import Execution Repor Page: 1
Import Options: All
Batch Size: 1000
Print Exceptions Only: No
Sites Open Interface Audit Report
Org Id Supplier Number Supplier Name Site Name
Total Sites Imported: 0
*** No Data Exists for this Report ***
Sites Open Interface Rejections Report
Org Id Supplier Number Supplier Name Site Name Reason
Total Sites Rejected: 0
when i checked the AP_SUPPLIER_SITES_INT table ,
the REJECT_CODE field has the value *'Vendor information and/or Operating Unit information is missing.'*
I THINK ALL THE REQUIRED FIELDS ARE POPULATED
why am i recieving this error ? is this caused by a bug? is there a required field that i didn't populated ?
please help me to solve this ....
thanks much!!Hi,
Could you please check : Doc ID: 316368.1 of Metalink...
Symptoms_+
The Supplier Site Contacts Open Interface Import program is not importing certain contact
information.
The Supplier Site Contacts Open Interface Import Execution Report shows the following Rejection
Reason:
Vendor information and/or Operating Unit information is missing
Cause_+
The Last_name field is a required field.
As per the Oracle Payables User's Guide.
Appendix G-111
AP_SUP_SITE_CONTACT_INT chart shows the LAST_NAME is a Required field
Solution_+
As per the Oracle Payables User's Guide.
Appendix G-111
AP_SUP_SITE_CONTACT_INT chart shows the LAST_NAME is a Required field
If you test this out directly in the Suppliers window in Oracle Payables:
Navigation: Suppliers-Entry
Queried up a Supplier, then clicked into the Site field under the Contact tab.
Entered the contact information and omitted the Last Name, when trying to save the record,
the system gives the following message:
*'FRM-40202: Field must be entered' and the cursor is on the Last Name field. This is a required*
field and is the intended functionality.
Hope this will help
Regards,
S.P DASH -
Vendor information and/or Operating Unit information is missing.
Hi,
I am new to the interface and learning programing can any body pls help me on this accept i will be thank full
I am running AP_SUPPLIER_SITES_INT and i got an error as
Vendor information and/or Operating Unit information is missing.
and also pls give me the diff b/w org_id and operating unit why the tables end with _all.
Thanks in advance
Thanks and regards
Goutham
Message was edited by:
goutham kondurucheck out these:
http://www.oracleappshub.com/oracle-application/_all-tl-vl-vf_vl_a_avn-and-what-else/
http://www.oracleappshub.com/beginner/understanding-multi-organization-structure-in-ebs-part-1/ -
I recently upgraded my iPhone 4 with iOS 5 and ICloud. My Contact information is missing phone numbers. What is my fix?
Try a reset. Press & hold the Power and Home buttons together for 10+ seconds, ignoring the red power-off slider, until you see the Apple logo. It is safe to do, there should be no content loss. It is the same as rebooting your computer.
-
External Handling Unit (Barcode) Information is Missing
Hello Folks,
I got a requirement where a warehouse will send us an EDI 945 file to confirm the shipment completion. But, it send us the file without SSCC labels for those shipped items of the order. This 945 is being translated into a SHPCON IDOC(DELVRY03) which doesn't contain the E1EDL37(Handling unit header). This IDOC is failing in status 51 with the error message: External Handling Unit (Barcode) Information is Missing.
What should be done to get this IDOC posted sucessfully even if it doesn't contain the SSCC label? Is there any setting that should be changed for this customer to not to look for SSCC labels(External Handling unit).
Thanks for your help,
SivaThis could be because of custom code. Check the exits in inbound FM and you should find out the root cause. Standard SAP doesn't check for customer level SSCC checks. If it gets the HU's from 3PL, it'll pack it such way. If it doesn't, it'll pack is the usual way.
-
Page footer information is missing for the first page alone.
Hi All,
After exporting to text format, Page footer information is missing for the first page alone. Any reasons?
Thanks for any help !!
Rgds,
ShriramIf you search the Business Objects Articles (see the link to the left on this page) for Export Limitations documents you'll see that page footers/headers are not supported when exporting to Text format (same for Page N of M.
If you open up a text file in Notepad - you'll notice that there is no Insert | Page Break (as there is in MS Word).
CR can't possibly know in advance where the page breaks will occur in a text document (or the application in which the document is opened) so most anything in CR having to do with pagination is not supported when exporting to Text.
The Export Limitations document is a handy item if you do a lot of exporting. -
WUC-17 Information was missing from the supplied file download request java
Dear Forms Guru,
Can anybody help why i'm receiving this error using webutil.
WUC-17 Information was missing from the supplied file download request java..
the result in my jinitiator console are the ff:
Loading http://oracleserver.hfgmgroup.hfgm:8889/forms90/webutil/webutil.jar from JAR cache
Loading http://oracleserver.hfgmgroup.hfgm:8889/forms90/webutil/jacob.jar from JAR cache
Loading http://oracleserver.hfgmgroup.hfgm:8889/forms90/java/f90all_jinit.jar from JAR cache
RegisterWebUtil - Loading WebUtil Version 1.0.5 Production
Loading http://oracleserver.hfgmgroup.hfgm:8889/forms90/java/toolbar_images.jar from JAR cache
connectMode=HTTP, native.
Forms Applet version is : 90290
2005-Feb-13 01:48:19.514 ERROR>WUC-17 [VBeanCommon.downloadFromURL()] Information was missing from the supplied file download request java.net.MalformedURLException: unknown protocol: c
2005-Feb-13 01:48:33.504 ERROR>WUC-17 [VBeanCommon.downloadFromURL()] Information was missing from the supplied file download request java.net.MalformedURLException: unknown protocol: c
2005-Feb-13 01:48:34.04 ERROR>WUC-17 [VBeanCommon.downloadFromURL()] Information was missing from the supplied file download request java.net.MalformedURLException: unknown protocol: c
Many thanks in advance...
benjieBenjamin,
WebUtil tries to download the jacob.dll to the client. The error message you get is most likely caused by teh following section in teh webutil.cfg file
install.syslib.location=/webutil
## Do not change the following lines unless instructed to do so
install.syslib.0.7.1=jacob.dll|94208|1.0|true
install.syslib.0.9.1=JNIsharedstubs.dll|65582|1.0|true
install.syslib.0.9.2=d2kwut60.dll|192512|1.0|true
## But you can add your own libraries in here
#install.syslib.0.user.1=testwebutil.dll|204872|1.0|true
If you have all these files available on the PC, then most likely the problem can be found in the virtual path setting for this directory
<virtual-directory virtual-path="/webutil"
real-path="c:/webutil/lib" />
in /j2ee/Oracle9iDS/application-deployments/forms/forms90web/orion-web.xml
Pleae refer to the webutil documentation for teh exact configuration steps.
Hope this helps
Frank -
"To" information is missing!
Help! I don't know how to describe this exactly, but my "to" information is missing on incoming my emails.
For instance, incoming mail message area displays "From" "Subject" "Date" and that's it!
Also, if I display the "To" column in column view, most often it's blank!
So, when I click on Reply All, it only replies to the sender, there is no info about who else the mail was sent to!
Big problem for me!
When I display long headers, there is no "to" header.
Can anyone help me?
Is something in mail stripping my "to" header? Is there any way an errant Apple Script could be doing that?
Or is something external (like my earthlink mail server) stripping the "To" header?
Please let me know if anybody has any suggestions.
Thanks!
DavidHelp! I don't know how to describe this exactly, but my "to" information is missing on incoming my emails.
For instance, incoming mail message area displays "From" "Subject" "Date" and that's it!
Also, if I display the "To" column in column view, most often it's blank!
So, when I click on Reply All, it only replies to the sender, there is no info about who else the mail was sent to!
Big problem for me!
When I display long headers, there is no "to" header.
Can anyone help me?
Is something in mail stripping my "to" header? Is there any way an errant Apple Script could be doing that?
Or is something external (like my earthlink mail server) stripping the "To" header?
Please let me know if anybody has any suggestions.
Thanks!
David -
HT4623 I completed the ios update but now my contact information is missing?
I completed the ios update but now my contact information is missing?
Your contacts will be in whatever program you have chosen to sync.
-
Seed_Database.dfb containing the datafiles information is missing
Hello All,
I installed Oracle 11g R2 on an HPUX server
While i am trying to create a database using the dbca, it fails because of this error: the file Seed_Database.dfb containing the datafiles information is missing.
Your help pls. what is the solution?
Regards,Hello,
I also have this problem. I downloaded the win64_11gr2_database_1of2 and 2of2.zip files 3 more times. I also tried downloading the linux versions along with version 11.1.0.6.0. I have searched the files in all cases for the Seed_Database.dbf and did no find it. Why do you suppose that after all of those downloads, from the Oracle download site, I would still not be able to locate the file? I certainly would like a reasonable explanation and a solution. I am running a windows 7 os but I am the administrator on this PC.
Thanks,
John -
Getting errorHierarchy node 000000 is missing inthe hierarchy 100 for comp
Hi Friends,
When we are executing the query in BI we are geeting the error that "errorHierarchy node 000000 is missing inthe hierarchy 100 for comp"
Could you kindly suggest me anything for resolve this error.
Thanks,
Shaliny. MHi,
check the hierarchy which is assigned to the query is correct one or not? and try to view the hierarchy, try to reactivate the hierarchy.
Regards
Sankar -
Is it possible to make a windows PC an IPv6 mobile node?
Hi, I'm wondering if any one used a windows PC (XP, seven or other) as IPv6 mobile node, if anyone knows a name of any tool, please give it to me.
Thanks.I'm not sure what you mean by "node" but yes, you can use netsh commands to make Windows do RA and routing.
-
I type information on a form and click submit. I get an error message that states that the information is missing even though I see it on the form. (Error message: Please type valid first name). How can I resolve?
== URL of affected sites ==
http://https://ushsbc71.recruitmax.com/MAIN/CareerPortal/candidate_update.cfm?szOrderID=88393&szCoverLetter=yesPlease see [[Use the Adobe Reader plugin to view or download PDF files]]
-
Xsi:type information is missing after Marshalling in JAXB
Hi,
I'm trying to mock the webservice, i have created classes for schema using JAXB (without any customization) and it's working. But when i try to marhsall my objects , it doesn't generate the xsi:type information of any element and attribute. I want this information since my webservice client needs this information.
I have tried to use mapSimpleTypeDef ="true" generateElementProperty="false" but it doesn�t help.
Following is output of marshal process
<?xml version="1.0" encoding="UTF-8" standalone="yes"?>
<MessageRetrieveResponseReturn xmlns:java="java:types.api.brokerapi.soap.mms"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema">
<return>
<APIVersion>1.0</APIVersion>
<ErrorCode>1000</ErrorCode>
<ErrorInfo> Success</ErrorInfo>
<BillingInfo xsi:type="java:BillingInfoObject" xsi:nil="true"/>
<HeaderInfo xsi:type="java:HeaderInfoType" xsi:nil="true"/>
<Content xsi:type="java:MessageContentType" xsi:nil="true"/>
</return>
</MessageRetrieveResponseReturn>
I want output to be look like following
<?xml version="1.0" encoding="UTF-8" standalone="yes"?>
<MessageRetrieveResponseReturn xmlns:java="java:types.api.brokerapi.soap.mms" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema">
<return xsi:type="java:MessageRetrieveResponse" >
<APIVersion xsi:type="java:apiVersionType">1.0</APIVersion>
<ErrorCode xsi:type="xsd:string">1000</ErrorCode>
<ErrorInfo xsi:type="xsd:string">Success</ErrorInfo>
<BillingInfo xsi:type="java:BillingInfoObject" xsi:nil="true"/>
<HeaderInfo xsi:type="java:HeaderInfoType" xsi:nil="true"/>
<Content xsi:type="java:MessageContentType" xsi:nil="true"/>
</return>
</MessageRetrieveResponseReturn>
I'm new to JAXB. Please let me know what I�m missing here
RegardsNot got a single answer , surprise whether the question is too dumb to ask or JAXB doesn't support feature or my requirement is weird :-) ... in any case let me know please
regards
Maybe you are looking for
-
I am using Hughes satellie for my internet provider. I am having a problem using all my bandwidth each day. Is there a way from using this bandwidth. I am using even when I am not using my computer. Is there a way to turn off things that are runn
-
I bought an iPad just before the change to iOS5. The personnel at the Apple Store used their computer to get an AppleID set up so I could access the App Store. I recently got an iPhone which operates on iOS5, which updates by direct download. In t
-
How can I delete the last row of a Matrix
Hi All, Does anyone know whether deleting the last row of a matrix controlled by a UDO child table gives problems? I have the strange effect that I cannot delete the very last existing row in the matrix, i.e. after updating the delete the last to-be
-
What the heck is iTunes uploading?
After a frustrating week trying to use iTunes match, I've finally gotten a good chunk of my library in the cloud. The problem is the remaining 10 gigs: all live DJ sets that are roughly 2 hours long. They hover around 180 mb each, so under the limit.
-
How to Restrict the Rows In Pivot Table
Hi All, how to Restrict the Row in the Pivot table. My Requirement is like this. i have to show the top 10 values in the pivot table but My report is show all the values. how can we achieve this. any quick solution for this appreciated. Thanks, Yogi.