Mobile phone bluetooth control on iBook

hello guys,
i am using a sony ericsson K750i mobile phone. is there any way/any freeware i can use besides "salling clicker" to be able to control iWorks or powerpoint on my iBook?
thanks a lot.

MsVee wrote:
I just bought one of those new do-everything cell phones and I'm trying to get the phone and the computer to talk to each other. When I ran the bluetooth setting on my laptop, it found and downloaded the driver from Toshiba driver site, asked me to connect the device then froze. It keeps asking me to plug in the device over and over.
I've made sure bluetooth is enabled on the phone but not sure how to check the PC.
Any help, direction or advice offered would be greatly appreciated.
Thanks in advance.
The M305-S4910 does not have Bluetooth hardware, so that's why the laptop is 'freezing'. Toshiba sells a USB adapter:
http://www.toshibadirect.com/td/b2c/adet.to?poid=429172

Similar Messages

[solved]Mobil phone - bluetooth -ppd- doesn't work

I have problem with my connection via bluetooth.
I pair my mobil and notebook, it seems to be O.K. then I dial to the net - phone connect a connection is establish, but nothing works, not ping, not web browser. Can you help me where is the problem?
i use
>pppd call gprs
gprs:
debug
connect "/usr/sbin/chat -v -f /etc/ppp/gprs"
noauth
usepeerdns
/dev/rfcomm0 115200
115200
local
nocrtscts
defaultroute
noipdefault
lcp-echo-interval 0
lcp-echo-failure 0
/etc/ppp/gprs
TIMEOUT 60
ECHO ON
ABORT '\nBUSY\r'
ABORT '\nERROR\r'
ABORT '\nNO ANSWER\r'
ABORT '\nNO CARRIER\r'
ABORT '\nNO DIALTONE\r'
ABORT '\nRINGING\r\n\r\nRINGING\r'
'' 'ATE1'
OK AT+CGDCONT=1,"IP","internet"
OK ATD*99***1#
CONNECT \d\c
ppp.log:
pppd call gprs
ATE1
OK
AT+CGDCONT=1,"IP","internet"
OK
ATD*99***1#
CONNECT
Serial connection established.
using channel 1
Using interface ppp0
Connect: ppp0 <--> /dev/rfcomm0
sent [LCP ConfReq id=0x1 <asyncmap 0xa0000> <magic 0xc7eaf41c> <pcomp> <accomp>]
rcvd [LCP ConfRej id=0x1 <magic 0xc7eaf41c> <pcomp> <accomp>]
sent [LCP ConfReq id=0x2 <asyncmap 0xa0000>]
rcvd [LCP ConfAck id=0x2 <asyncmap 0xa0000>]
rcvd [LCP ConfReq id=0x0 <auth pap> <mru 1500> <asyncmap 0xa0000>]
No auth is possible
sent [LCP ConfRej id=0x0 <auth pap>]
rcvd [LCP ConfReq id=0x1 <mru 1500> <asyncmap 0xa0000>]
sent [LCP ConfAck id=0x1 <mru 1500> <asyncmap 0xa0000>]
sent [CCP ConfReq id=0x1 <deflate 15> <deflate(old#) 15>]
sent [IPCP ConfReq id=0x1 <addr 0.0.0.0> <ms-dns1 0.0.0.0> <ms-dns3 0.0.0.0>]
rcvd [IPCP ConfReq id=0x0 <addr 10.6.6.6>]
sent [IPCP ConfAck id=0x0 <addr 10.6.6.6>]
rcvd [LCP ProtRej id=0x0 80 fd 01 01 00 0c 1a 04 78 00 18 04 78 00]
Protocol-Reject for 'Compression Control Protocol' (0x80fd) received
rcvd [IPCP ConfNak id=0x1 <addr 10.176.135.227> <ms-dns1 160.218.10.200> <ms-dns3 160.218.43.200>]
sent [IPCP ConfReq id=0x2 <addr 10.176.135.227> <ms-dns1 160.218.10.200> <ms-dns3 160.218.43.200>]
rcvd [IPCP ConfAck id=0x2 <addr 10.176.135.227> <ms-dns1 160.218.10.200> <ms-dns3 160.218.43.200>]
local IP address 10.176.135.227
remote IP address 10.6.6.6
primary DNS address 160.218.10.200
secondary DNS address 160.218.43.200
Script /etc/ppp/ip-up started (pid 8117)
Script /etc/ppp/ip-up finished (pid 8117), status = 0x0
I thing It is the right way but why it doesn't work?
Last edited by walker.cz (2007-11-20 13:24:38)

mucknert wrote:What's the output of your ifconfig and route? What's the content of your resolv.conf?
resolve.conf
# Generated by dhcpcd for interface eth0
# search chello.upc.cz
# nameserver 192.168.1.1
ifconfig:
ifconfig
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:366 errors:0 dropped:0 overruns:0 frame:0
TX packets:366 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:19366 (18.9 Kb) TX bytes:19366 (18.9 Kb)
ppp0 Link encap:Point-to-Point Protocol
inet addr:10.177.143.12 P-t-P:10.6.6.6 Mask:255.255.255.255
UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1500 Metric:1
RX packets:3 errors:0 dropped:0 overruns:0 frame:0
TX packets:4 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:3
RX bytes:54 (54.0 b) TX bytes:66 (66.0 b)
route:
route
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
10.6.6.6 * 255.255.255.255 UH 0 0 0 ppp0
default * 0.0.0.0 U 0 0 0

Let Macbook Pro share the Mobile Phone connection

Hi there,
try using macbook and mobile phone bluetooth to let my macbook pro share the internet connection from my mobile phone network.
you know most of the time when i carry my laptop, there is no wifi connection to use internet, but mobile phone should be a good option. but how to share via bluetooth.
try to find some articles here but really get more confused.
anyone ever make this happen?
Thanks,

This is called Tethering which the iPhone supports, but your cell phone carrier must support this to begin with and most charge an additional monthly fee for a tethering data plan in addition to the carrier's data plan for the iPhone alone.
Page 24/25 of the iPhone User Guide.
http://manuals.info.apple.com/enUS/iPhone_iOS4_UserGuide.pdf
You can use iPhone as a modem to connect, or tether, your computer to the Internet. You can connect iPhone to your computer using the Dock Connector to USB Cable, or via Bluetooth. Note: Tethering may not be available in all countries or regions. Additional fees may apply. Contact your carrier for more information.

Bluetooth file transfer from Sharp GX29 mobile phone to iBook

hello all,
got a new sharp gx29 mobile phone.
problem:
cannot send files via bluetooth to my ibook.
but can send from ibook to Sharp.
when trying to send from phone, a dialog window opens on mac os x, asking whether accept or cancel the transfer.
no matter how many times i click on accept, nothing happens, sometimes it hits it, and goes further to a transfer dialog window with the transfer progress bar, but it starts to transfer and stops at about 5-10%, and nothing happens.
Any one has Sharp GX series and problems like me?
I know that Sharp is not supported by isync, but that's not what I am trying to do (isync), just a normal file transfer.
Thnx
Tom

I myself have missed the obvious many times so I'm going to ask.
In System Preferences/Bluetooth/Sharing. Do you have: Bluetooth File Transfer and File Exchange checked???? Then make sure your settings in the pop up menus on the right are correct.
If you have everything set properly in Bluetooth preferences on your iBook then you might try the Sharp web site for troubleshooting since you can't send files via Bluetooth to your iBook, not the other way around. Sounds like maybe your Sharp possibly has something blocked somewhere...
Carolyn

Satellite M40-237: How to connect the mobile phone with Bluetooth

I have a new Noki 62333 and I have a Satellite Toshiba M40- 237. I have a big problem with the conection between them. I don t know how to turn on bluetooth on my pc. Can you help me????

Hello Iva
A friend of mine has Satellite M40 and I know that this unit is delivered without BT module. If the unit has BT module you will find BT label on the bottom side of your notebook.
To establish BT connection with his mobile phone he uses BT USB stick.
By the way: does Iva comes from Zagreb, Croatia?
Bye

Address Book and Bluetooth Mobile Phone

Hi,
I have been trying to use my bluetooth enabled mobile phone with the address book to dial numbers and send sms. I am using the Nokia 9500 and the Motorola Razr V3 BLK. But when I pair the phone with address book and click on the tab of the contact, address book loses the bluetooth connection and the Send SMS and dial number options are not highlighted.
I have tried looking around for help, but haven't found anything. I would appreciate it if anyone could help me with this.
Best Regards,
Aditya

This facility is usually dependent on your network
I am in uk on Vodafone and it doesnt work here
I use a small program called BluePhoneElite with the v3 and it handles sms and the calls very well
They pop up on the powerbook screen and also the sms save to the powerbook
thats the address you can get a free trial
I paid the small amount and have been very happy with it
Now I wish there was a program to handle landline calls
I am just a happy customer nothing to do with the company before anyone asks!
http://www.reelintelligence.com/BluePhoneElite/

New iMac and Bluetooth connection to mobile phone

Hi,
I have a brand new iMac 21.5", 3.33 GHz here and I use a Motorola KRZR K1 mobile phone and the emitSMS widget, to send SMS messages.
But this widget can't detect the Bluetooth connection to the mobile phone.
I delete the bluetooth preferences, but this does't help.
On my MacBook with MacOS X 10.6.2 is no problem.
Anybody an idea, what's the problem?

Hi again,
Can it be, that's a problem with the last Airport Client Update?
On my MacBook is this update not installed and there is no problem.

Connect Bluetooth with Samsung mobile phone headset?

I'm making a movie in Garageband and using the iMac internal speaker for recording my voice. I have a Samsung Bluetooth device I use with my mobile phone and I thought the sound would be better. I can't seem to get it to connect with my Mac. I have bluetooth sharing on, but when I go to the bluetooth set-up window, it doesn't recognize it. Am I doing something wrong, or is it incompatible?
Thanks for any help, I'm trying to avoid buying a new mic.

Have you tried pairing using the Bluetooth icon in the system tray?
Also make sure your Bluetooth drivers are up to date: http://mobilesupport.lenovo.com/be/nl/products/laptops-and-netbooks/lenovo-g-series-laptops/lenovo-g...
Jonas
Microsoft MVP: Windows Consumer Expert
Yoga Tablet 2 10 || ThinkPad X1 Carbon (20A7007MPH) || ThinkPad Helix (3698-6EU) || IdeaCentre B540
Twitter: @jonashendrickx

Connecting up a mobile phone to a computer (via bluetooth?)

Hi,
I'm looking for the best way to connect up a mobile phone to a nearby computer (wirelessly) so that they are able to communicate with each other.
Would bluetooth be the best way?
Would it be as simple as buying a bluetooth dongle for the computer, and writing a java application on the computer which accepts connections, and then writing a j2me application for the phone which connects to the computer? How would you find out what address the mobile phone needed to connect to?
Also, is there a better way of doing this without the need for a j2me application on the phone, such as a phones built in web browser? If I did this how would the computer be able to send information over to the phone telling it what to display? Would it be a case of creating an index.html on the computer and the phone would be able to display that?
Thanks for the help

{color:#000080}Bluetooth looks good for your purpose. At the phone end, you would need a MIDlet to access an inbuilt bluetooth serial port using the btspp: protocol. At the PC end, your software will connect to the serial port corresponding to your bluetooth dongle. The two can communicate using a client-server relationship.
That is, of course, the bare-bones outline of quite a lot of stuff. Device pairing has to be done manually, since there is no method to do this in j2me. On many handsets, BT has to be launched before running a MIDlet that requires its services. All bluetooth dongles are not created equal, neither are all bluetooth managers. So you will have to deal with a number of specifics as you progress. I am not sure on this, but I think there are a few phone models that do have bluetooth but no serial port profile, so that's another point to check out.
AFAIK, the browser on a mobile phone cannot open local files nor access content via bluetooth -- html pages can only be viewed via the internet.
You will need to use the javax.bluetooth and, possibly, javax.obex packages.{color}
http://java.sun.com/javame/reference/apis/jsr082/index.html?index-all.html{color:#000080}
If you have further queries regarding the j2me part of your endeavour, you might get better response in the CLDC and MIDP forum{color}
http://forum.java.sun.com/forum.jspa?forumID=76{color:#000080}
db{color}

Mobile Phone to PC via Bluetooth

I am investigating the posibility for a certain function for an application on a mobile phone. An Single Sign-On (SSO) application. This application is going to transmit its authentication data to the PC and cause the Web browser to open and log in to the site with the authentication data from the mobile phone.
I was thinking if it is possible to send this authentication data and open the web browser without a companion application already running on the PC. As most SSO applications do have.
Scenario 1: Is it possible to transfer a little program to the PC which executes the necesary commands to open the web browser with minimal or no user interaction on the receiving PC when sending over this file/program?
Scenario 2: Maybe it is possible to simulate a keyboard on the mobile phone which sends the authentication data over to the web browser like a keyboard input(only automatic)? Can I open the default web browser with a keyboard key combination(Is this possible to do with Java)?
I have never programmed J2ME with Bluetooth before so I have no idea if this is possible with either J2ME or Bluetooth.
I would appreciate any answers/clues/ideas to this problem as I need to figure this out soon concerning my upcoming MSc thesis on Single Sign-On.

Hi!all..
I am doing the same thing...in my project actually i want to transfer data from pc to mbile back and forth..using bluetooth
I m using atinave aveLink BT library...
In that i am able to transfer data from mobile to pdesktop pc successfully..
in my application desktop pc is server and mobile j2me application is client....
Now i am able to connect both mobile and pc and as i have told u already i am to send data from mobile to pc and pc receives them and prints them but when i am trying reverse thing my mobile receives data randomly i.e. it may happen that mobile doesn't receive data at all or mobile receives all the data...and in that ratio of not receiving data in mobile at alll is more than receiving successfully....
I have also tried to communicate between two mobiles in which one is server and other mobile is client using same code to receive and send data....they both communicate well successfully back and forth...
but problem is only between pc and mobile....
Another thing i have also tried to make my mobile server and pc as client but in that case when in service search completed method when pc client tries to connect to mobile server which is already successfully in waiting mode the pc throws an exception "java.io.exception : Connection failed"
So i mnot getting the reason why it is happening....
pc server can receive data from mobile client successfully and can slao send data successfully but mobile client doesn't receives or some times receives....
mobile server and mobile client both successfully communicate with each other successfully.......
And mobile server and pc client case mobile server goes into waiting mode but client is not able to connect with server throws and io exception: "Connectionfailed"
So is there any one who has same problem as mine???????
or is there any one who can tell me the reason why it is not receiving data or why connection failed exception is coming?????????
Or is there any one who has done successful communication between pc server and mobile client???????????
if some one is there then plz help me because in my project to transfer data back and forth between mobile and pc is necessary....in any case...
Help from any one would be appreciated greatly..............

Is there a possibility that the Bluetooth send some content to other mobile phone brands (Nokia, SonyEricsson ...)

Is there a possibility that the Bluetooth send some content to other mobile phone brands (Nokia, SonyEricsson ...)

You can only send Top Secret Stolen Documents by bluetooth, nothing else .

Can't sync bluetooth mobile phone with wireless keyboard or mouse

Hi,
I can't sync my mobile phone (K750) when I am working with my wireless keyboard and my wireless mighty mouse.
When I start the sync progress I loose contact to my mouse & keyboard....the sync progress starts with the mobile phone, but after transferring some data it also looses contact to the phone, so the sync interrupts. After some seconds I get back in contact to my mouse & keyboard.
When I turn off my wireless mouse & keyboard and I am using a wired keyboard & mouse instead everything is working fine!
Any ideas????
Many greetings,
rob
Mac Pro Mac OS X (10.4.7) Wireless Keyboard+Mouse, Sony Ericson K750

this happens alot, use a usb2 flash drive (not usb3) and as a precaution for other issues, also disconnect any other usb devices except your kb and mouse

Connecting Flash with Java inside a mobile phone

Hello,
I'm working on a TBOT project that is running on Java on
mobile phones, and we have been pondering the possibilities of
making the UI with Flash Lite 2.0. Currently we are thinking of
using XML / textfiles to get the data to FL from the java, but
sending data back to the Java client inside the mobile phone is
something I have no experience of, and was wondering if it is
possible even?
Basically can a FL application connect with / contact other
applications / services in the same mobile phone? EG. Sending data
to somewhere in a mobile phone? Or can the Java somehow intercept
stuff Flash lite sends out for example?
Thank you for all your help.
Cheers
Niilo

I think you will be happier if you go about it through Bluetooth. I had a dongle for my Ibook 1.2 and now my Ibook 1.33 is bluetooth enabled.
I use Verizon and have a Motorola V710 (bluetooth) . The connection works perfect everytime! I am disappointed that this new model Verizon phone does not support Isync. To sync data from the computer to the phone. I did find that Verizon was not very helpful as they don't seem to know much about Macs. I had to find out on how to connect via Google. Good luck! Geof

LG Mobile phone - F2100

Does anyone know how to connect this phone to the mac. I have and emac (no bluetooth) ibook g4 with bluetooth but no bluetooth on phone. Have loaded software onto virtual pc but cant seem to get the mac to recognize that it is attached to the phone via usb cable. Emailed LG who said that you cant use this phone with macs. (unlike the person who sold it to me!!)
Any help or ideas before I go back to the seller and demand a compatible phone!
Thanks
G

BitPim supports many LG phones but not the Chocolate.
Given the poor support for Macs in Mobile Phones you really need to buy a phone on the iSync list if you intend to use it as such.
mrtotes

Using HP ePrint with mobile phone internet connection

Hello, I have a peculiar problem.
I have an HP Officejet 4630 e-All-in-One series printer and I want to set up HP ePrint.
I have internet connection for my laptop computer, which is the computer I use. It too is a HP. To set up your HP ePrint account you need the printer's code number which can be printed from the printer's control panel. Once you have the printer code, you can then enter it in to your account to add your device. My problem is that my interent connection is the mobile phone which I use to connect my laptop to the internet. The printer is then connected to the computer using either the direct wireless feature or using the supplied USB cable. Because of this, I can't obtain the printer's code, from the printer's control panel. I do not use landline internet connection as the mobile phone is used as a modem.
What do I do?????????
Can I just phone technical support and ask them to email my printer code??????
This question was solved.
View Solution.

Jagaccountant wrote:
... Can I just phone technical support and ask them to email my printer code??????
Hi,
No, this is not going to work and WON'T work at all. Your printer MUST be connected to the internet to allow ePrint to work. No point to send an email to printer and it is NOT there.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Mobile phone bluetooth control on iBook

Similar Messages

Maybe you are looking for