Mobile phone frequency/radiation appears to greatly affect Vision:M play

I just brought my recently-bought Vision:M out on a "field-trip" and it froze (stalled) 4 times in a 35 min train journey, 5 times in a 45 min bus journey, and 3 times while I was window shopping. Each time, I had to reset the player tru the "pin-hole" size RESET button to resume it's functionality (got a really hard time looking for a sharp object to reset the player while on the street). Pondering about what was happening to my Vision:M, it sort of came to light when my mobile phone rang and my player froze-up immediately and the music stalled.
Was wondering if others out there has experienced similar issues with their Vision:M? And if Creative knew about this issue or has recieved similar complaints/feedback in this aspect?
I usually hold my Vision:M and mobile phone together in one hand when I go out. Will try to seperate the two items when I go out, to confirm this possible issue/problem.Message Edited by Krgaer on 02-8-200606:22 PM
Message Edited by Krgaer on 02-8-200606:35 PM

This time round, put my mobile phone in my pocket while holding the ZV:M player on my hand. Worked flawlessly through 2x 35 mins train ride and 3 hrs shopping.
Also, tested by putting the two item (ZV:M + mobile phone) together and called myself on the mobile. The ZV:M player stalled again upon recieving the call on the mobile phone.
Also tried to reload to the latest firmware (which already was) as suggested by Creative Technical Support. Didn't helped a tiny-whiny bit with the cellular radiation interference.
Other than that, very impressed with my ZV:M. Solid multimedia player.

Similar Messages

HT201302 My phone doesn't appear in my computer. Neither does the auto play box appear. Any ideas?

I'm trying to upload my photos to my computer. I don't have wifi so I can't use photo stream there not appearing when I sync and my phone doesn't appear in my computer and auto play doesnt come up any ideas?

windows http://support.apple.com/kb/TS1538
restart apple mobile device http://support.apple.com/kb/TS1567

Mp3-file not recognized on my Samsung SGH-E720 mobile phone

hey,
i recently ripped my audiocd's in iTunes. some files can't be played back on my mobile phone: it says "file not recognized". others can be played. what am i doing wrong, or is it just the type of audiocd i ripped?
grtz
imac g5 17" Mac OS X (10.4.8) broken for the moment ...

hey,
i recently ripped my audiocd's in iTunes. some files can't be played back on my mobile phone: it says "file not recognized". others can be played. what am i doing wrong, or is it just the type of audiocd i ripped?
grtz
imac g5 17" Mac OS X (10.4.8) broken for the moment ...

I have a fillable form that we send to contractors - when the form is opened on a computer the contractor can view the fields we have completed, however when viewing from a mobile device or cell phone those fields appear blank. Any suggestions? I am at a

when the form is opened on a computer the contractor can view the fields we have completed, however when viewing from a mobile device or cell phone those fields appear blank. Any suggestions? I am at a total loss as it works when viewing from the computer. I am assuming it is a setting or maybe we need to save it a special way?

What version of Reader are they using, exactly? And are you sure they're
using Reader itself and not opening the file inside a browser window, for
example?
On Fri, Feb 6, 2015 at 5:24 PM, jessicao96457206 <[email protected]>

Facebook appears in mobile phone format when running in firefox on my PC

facebook started playing up by first not displaying profile pictures, could no longer access chat or message facility. Next time it showed facebook like it is on a mobile phone screen. no graphics just plain text down left side of the screen. this started after the automatic update last week. i downloaded this weeks update to 3.6.8 and still not working. still just get plain text. Facebook displays properly on internet explorer so must be some sort of firefox problem... I have cleared the cache and still no change... does anyone have any ideas?
== URL of affected sites ==
http://facebook.com

A possible cause is security software (firewall) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process.
See:
* [[Server not found]]
* [[Firewalls]]
* http://kb.mozillazine.org/Browser_will_not_start_up

How do I get my bookmarks to appear on my mobile phone once I've completed the sync process?

I have sync-ed my mobile phone with my desktop Firefox, and my bookmarks aren't showing up in the bookmark drop down list. I rebooted my phone, and they are still not appearing. What can I do to get my bookmarks to appear?

Nevermind, they suddenly appeared.

320PPI 5cm x 5cm , and the mobile app that this image appear runs on a mobile phone of 200ppi disp

IF I DO AN IMAGE in FW or PS of 320PPI 5cm x 5cm , and the mobile app that this image appear runs on a mobile phone of 200ppi display resolution, then resolution seem of image should be 200ppi ... in other words should adapt automatically????

Only if you were to measure the physical dimentions. (Using physical dimentions and changing the ppi would add or remove pixels)
inches X ppi = pixels
A 1200 x 1600 pixel image will be the same on all devices that share that ratio, the ppi difference comes into play when the phyical size of the screen is changed.
Technically the quality never changed only the zoom changed.
When designing a screen at 1200x1600 (example) That image will fit on any screen that has that spec.
The ratio plays a role when only 1 of the 2 pixel dimentions changes (width or the height).
On larger screens, the ppi is lower to equal the same number of pixels. So when a device can support a higher resolution, the ppi is increased on the same size screen.
Knowing that, having the specs of the device will tell you the maximum number of pixels that screen can display.
Therefore, when designing a screen, always start with the largest resolution (pixel dimmentions) first, then downsample to the next size screen and so on.
The reason is simple, it is easier to remove pixels, then it is to add them later, as photoshop or any other software does not know what should be there.
BTW, this is also the reason why you can change the pixel dimentions in the save for web dialog box and not the physical size or ppi. To make it easy to reduce the pixel dimentions.

Prompt to Update Account with Mobile Phone Number WON'T STOP APPEARING

When signing in to Verizon a box keeps coming up to enter mobile phone number. I have been checking off "No Number" and it says account settings updated but the box keeps appearing. I have deleted cookies and history as instructed by cust. svc but that did not fix the problem. Using Firefox.

Thanks for contacting us MsSusan. I just attempted this, to test it out, and was able to confirm it works. If you have either the Internet Explorer or Chrome browser on your device, could I have you try it again with either of those browsers (After clearing cookies) and let us know your results?
Thanks,
FCN

Can not see the contacts in E63 mobile phone

Hi,
I amusing E63 mobile phone. I am not been able to view the contacts in the mobile, so not been able to use the same. But when an incoming call comes in I do get the name resolution of the person calling and his mobile no which is stored in the contacts.
I tried backing up the mobile and all the time the backup of contacts could not happened and besides Contacts rest all is backed up....
Pls do let me know how to resolve this issue..
Thanks in advance...

Hey kartik_sh
Welcome to the forum, your contacts are on the sim card and they will need to be either copied to Contacts on your phone for easy access.
It is not clear from your description what could be causing this issue, so I will present a couple of possibilities. The first is that the contacts that you cannot see are stored on the SIM card and not in the phone memory, to remedy this you can follow these steps to copy your contacts into the phone memory:
Menu>Communic.>Contacts>Options>SIM contacts>SIM directory>Options>Mark/Unmark>Mark all>Options>Copy to Contacts
If this is not the case, and if after selecting Contacts you see the options Go Online and ChatServiceBuddy, it means that the ”Ovi Contacts Chat” service is selected as the default view. This service has been discontinued and replaced by Nokia’s new Chat service powered by Yahoo. You can set your default Contacts view back to the contact information stored in your phone by following these steps:
•Select Menu>Communic.>Contacts
•Press the left navigation key to select the central field at the top of the screen, then press the centre of the navigation key to open the menu, and finally select Phone
•You should now see the contacts stored in phone memory. To make this the default view, select Options>Settings>Default contact list>Phone
If you are interested in the new Chat application, you can switch the Contacts view back to the Ovi Contacts view, select Go Online and sign in with the same user identity and password that you use to log into this forum. Your phone would then remind you that Ovi Contacts Chat is discontinued and take you through the steps to download and install the new Chat application. We would recommend that you use a WLAN connection for this.
If the two suggestions above do not resolve your issue, we can investigate further.
Out of interest, when you say that creating a back-up did not successfully back-up contacts, do you mean that you created the back-up with Nokia Suite and the report displayed at the end of the process indicated an error? If there was no error during the back-up process, it is likely that the back-up was successful and we still need to work out whý the information is not appearing in your phone.
Let me know if it works
Kind regards
Carl
If this post answers your question, you can help others by clicking the green accepted solution' button.
Please ask your questions to the main board and not to my mailbox. Thank you.

When I send a text message, the iPhone 4s sends it via email rather than to the mobile phone number I wish to message. How do I change that default?

My wife (who has a Droid) asked me to text a photo to her. I went to Message on my 4s, selected my wife as the target for the text, selected the photo, and sent the text. Rather than appearing on her mobile phone, the text went to her email. When I selected my wife as the person I wanted to text, I was not given any choice of the target phone number or email address...it just defaulted to her email and did not tell me that is what it was doing! I did find a solution, but it's more complicated. I have to go to Contacts, select my wife, and then I'm given a choice of how I want to send the Message. Why doesn't the iPhone do this in Messages in the first place?

I am not sure what you mean.
Do you mean the From field?
You can change it by tapping it, it will give you options based on the other email accounts set up.
You can set a default account here:
Sttings > Mail, Contacts, Calendars > scroll down to the Mail section & you will see Default Account. You can change that to your gmail account.

Sending Email From Mobile Phone

So I have Postfix working great and I've always used webmail if I needed to send email from PC's outside of $mynetworks. So fast forward to today where I got my 1st Android powered mobile phone and I can configure the Android mail client to send/receive IMAP email but my question is do I need to become an open relay to allow my random wireless providers dynamic range of IP's to send mail via Postfix? Seems extremely vulnerable and scary to think I would have to allow my providers IP range to relay mail via my MTA. I started reading a bit and I think I need SASL authentication (correct me please if I'm wrong) and since both Postfix 2.8.1 & Dovecot 2.0.11 are configured / using TLS, is there anything else I would need beyond SASL or that you recommend for sending email from my Android powered mobile?

I'm in the same boat, except that I don't have a smartphone yet - but I'm already outlining the changes to my soho-network.
I guess you have to secure the mailserver (using SSL + TLS looks ok to me) and also secure the server as a whole: configure iptables to lock it down completely, except for as little ports as necessary: IMAPS and SMTPS, maybe even on an other-than-default port...
Maybe you are also interested in syncing your calendar: I will be doing that with davical on my server (running for 2 years now) and acal on my Android smartphone: no syncing, but native caldav between server and smartphone...
The other option would be to install openvpn on your server and always work via your VPN.
Last edited by zenlord (2011-03-24 17:57:54)

My mobile phone is always automatically shut down at the time of the photo.

My mobile phone is always automatically shut down at the time of the photo.

Plug the device into a wall outlet and leave it for about 20 minutes. If it has not powered on at that point try a reset by pressing and holding the home and power buttons for about 15 seconds until the white Apple logo appears.

New to Java. Want to write a simple applet for a mobile phone.

Hello,
I want to write a simple java applet for a mobile phone. currently I am in the stage of thinking about whether this is possible in a timeframe of about a month. I have very little java experience from a while back so I'm pretty much starting from scratch.
All I want is an applet that lets you send 2 or 3 variables to an online server. The server will then reposition telescopes.
All i'm concerned with is the mobile phone part, which doesn't have to be secure or impressive. Just a simple interface.
Ideally it should work on my nokia 6070, which occording to the official specs has the following java technology:
MIDP 2.0
CLDC 1.1
JSR 120 Wireless Messaging API
JSR 135 Mobile Media API
Nokia UI API
(I don't know what any of this means but am a good learner).
Can anyone offer me any advice? Is this possible in my timeframe? where should I start? I need a editor and compiler also (I'm using windows XP).
Many thanks and kind regards,
Jason

Actually it is working on my phone now.
I changed the target platform in the wireless toolkit settings to MIDP 1.0
Now to create the fields coordinate fields etc. I don't have much of a clue really.
Current I have:
import java.io.*;
import javax.microedition.lcdui.*;
import javax.microedition.midlet.*;
public class AtmosMIDlet extends MIDlet implements CommandListener
Form WelcomeForm = new Form("AtmosMIDlet");
StringItem WelcomeMes = new StringItem(null, "Please enter coordinates:");
TextField Longitude = new TextField("Longitude", "", 3, TextField.NUMERIC);
TextField Lattitude = new TextField("Lattitude", "", 3, TextField.NUMERIC);
public AtmosMIDlet()
try
ImageItem logo = new ImageItem(Image.createImage("/logo.png"));
WelcomeForm.append(logo);
catch (java.io.IOException x)
throw new RuntimeException ("Image not found");
WelcomeForm.append(WelcomeMes);
WelcomeForm.append(Longitude);
WelcomeForm.append(Lattitude);
WelcomeForm.addCommand(new Command("Exit", Command.EXIT, 0));
WelcomeForm.setCommandListener(this);
public void startApp()
Display.getDisplay(this).setCurrent(WelcomeForm);
public void pauseApp() {}
public void destroyApp(boolean unconditional) {}
public void commandAction(Command c, Displayable s)
notifyDestroyed();
I'm trying to get the image logo.png to display at the top but I get the error:
C:\WTK25\apps\AtmosSpec\src\AtmosMIDlet.java:19: cannot find symbol
symbol : constructor ImageItem(javax.microedition.lcdui.Image)
location: class javax.microedition.lcdui.ImageItem
ImageItem logo = new ImageItem(Image.createImage("/logo.png"));
^
1 error
com.sun.kvem.ktools.ExecutionException
Build failed
When I try to build.. Any help would be great.
Ideally the image would be on a seperate screen for a couple of seconds.

Cant add Competitors on Mobile Phone App CRM 2015

I'm currently configuring the mobile phone app for CRM 2015 online.
The issue i'm having is that i cant seem to add competitors, either directly or to an existing Lead or Opportunity. Although the entity appears in the lead and opportunity records, it only shows already added competitors (which were added via the browser
or tablet app). I don't seem to have the option to add new competitors within the mobile phone app as the little "+" symbol at the top of the form is not present.
I have the competitors entity enabled for the mobile phone app and tablet app. the tablet app works fine.
I've also noticed that competitors entity appears on the tablet home page navigation but not on the mobile home page.
Any suggestions?

Hi,
This is very urgent. I have to submit the app in 2 days. Doesn'y anyone have any idea about this?? Please Help

Mobile (phone & tablet) screen profiles not displaying correctly

RoboHelp 11 on a Windows 7 machine
I have a small project that I put down in August and just picked up again today. The only changes I made today were a background color in the selected layout and adding browsers to the screen profiles (desktop, mobile, phone). I also changed the pixel sizes of aforementioned screen profiles, and saved, but ultimately thought better of it and changed them back. I don't know if that would have made any difference to this problem. (When I made the size changes RH told me to update the media queries, but I'm not using any... or at least none came up in the Manage Media Queries functionality.)
Then I re-generated the output, but the tablet and phone screen sizes are no longer displaying properly when I tested by changing the size of my desktop browser--there is a rather large "dead zone" browser size in which no content is displayed at all (which makes it almost seem like the "responsive" part of the output doesn't work), the internal navigation (forward and back buttons, and bar) is shoved up in the header bar, and no browser horizontal scroll bar appears so that I can scroll to see the edge of wide images. I mainly use IE but this occurred in Firefox and Chrome as well. The desktop display seems to work fine. (I'm so sorry I don't have screenshots now--I can provide some if needed.)
I wondered if this had something to do with my chosen "template" but a brand new project that used that same one (Theme1_Standard) didn't have any problems. Now, I also noticed that the template seems to have changed since I was last in Robohelp, because the unchanged template preview today was definitely not the same as the template from August. The Readme for the latest patch didn't mention anything that I thought seemed to be related.
Like I said, all I changed were a color, the screen profile browsers, and the screen profile sizes which I later discarded. I am completely at a loss as to what caused this and how to fix it. I feel like a complete dolt because it seems to be related to something I *DID* but retracing my steps has yielded nothing.
Thank you!
UPDATE
Still having this issue, but in poking around I discovered that some of the program files on my local machine were updated in mid-September (when it looks like the latest patch's ReadMe file was installed on my computer) and others were updated mid-October (the first time I was in RH since mid-August, though I didn't generate anything then). I don't know if this means anything, but to me it looks mildly suspicious. Thx.

Screenshots:
Internal navigation shoved up into the header bar (yellow on top of black, color changed here just to show this):
In tablet size, an extra wide image does not cause a horizontal scrollbar to appear anywhere at the bottom of the browser to scroll to the right side of the image (sorry this one is hard to see, but the image does go off to the right side of the screen):
Dead zone:
Content reappears at a much smaller size and a much larger size, but the top/bottom/and right-side text wrap is off:
(Again, above, notice no horizontal scroll bar despite the extra wide image.)
It may be of note that I can use a different template (e.g. Theme2_Government) and I don't have such problems. I guess this means there's something wrong with the template/layout in this project. Am I just going to have to reconstruct it?
Thanks,
S

Mobile phone frequency/radiation appears to greatly affect Vision:M play

Similar Messages

Maybe you are looking for