Mobile Scanner Apps with ITS

I like to make a mobile Application with the ITS WEBGUI. But I get an error No IVIEWS are supported.
Is there a way to run ITS HTML on Windows Mobile 2003n(I need the table controls)
Thx
Peter

Hi Peter,
the webgui will not work on the browser available on Windows Mobile 2003. But you can make use of ITSmobile to create a customer mobile application. For details about ITSmobile please check the ITSmobile documentation on http://help.sap.com.
Best regards,
Klaus

Similar Messages

Att mobile transfer app with android to iphone 5s

I used the att mobile transfer app to transfer my contacts from an android to my 5s. They all transferred but they are all under the # in contacts instead of their alphabetical place. Help!

Use iTunes on a PC or MAC. Backup the iPhone 4 and restore the data to the 6.

HT4509 Barcode scanner app with international keyboard

Hi,
is there any barcode scanner app that can be used as an iternational keyboard:
it should allow to be added from settings
when this keyboard is selected, the camera should open, allowing to scan barcode, and using it in any app, as normal keyboard?
thx

barcode scanner is an electronic device for reading printed barcodes. Like a flatbed scanner, it consists of a light source, a lens and a light sensor translating optical impulses into electrical ones. Nearly all barcode readers contain decoder circuitry analyzing the barcode's image data

Scanner app with Lion?

I am just about ready to upgrade to lion, but have an issue with my scanners ... Three of them, all epson.. Using Epson scan app has been great, but I read that it will not run on Lion... So I've tried both image capture and vuescan... Both are awful compared to the old epson scan and I don't really see any alternatives.
What have you with epson scanners done???
Thanks
Tom

I am a graphic designer and have been using an Epson Perfection Photo 4870 for years now. 99% has been TWAIN'd through Photoshop. My main issue always was that, I would have to FILE > IMPORT > TWAIN over and over again, for everything I wanted to scan, and it wasted a lot of time relaunching the Epson scanning software.
Recently my 2007 MacBook died (two days ago) completely...so I had to purchase a new MacBook Pro with Lion pre-installed. After multiple failed atempts to TWAIN the scanner through Photoshop or even trying to launch the scanner through the Print / Fax settings (which would never launch)...I finally discovered that Image Capture was fully recognizing the scanner.
So I have ran a few tests scans, photos, artwork, office papers...etc. I haven't tried the transparency abilities yet, but so far, the software seems to retain all the abilities the Epson software did and actually has more features now. All the Image Sharpen, Unsharp Mask, Descreening, Backlight and Dust Removal are all there and seem to function normally. It's got all the DPI options, size, color and even file type options.
It may take a few more times to really tweek the software and figure out what are the best settings to use now, but I think overall it is going to be just fine. One new feature that I have seen from the get go, is the ability to ROTATE the scanning selection box! Which was NOT available in the Epson software, this is a huge plus which will save time having to readjust alignment in PS if the scanned items ***** on the scanner bed while closing the lid or something. Also, the fact that the software doesn't have to close and relaunch on every scan.
The main drawback I do see so far though, is that you cannot add the PS.app to the list of destinations to send a scanned file. So at the moment I am just sending scans to a select folder and then opening them in PS to edit. It has the option to send to iPhoto, Image.app and Mail, but not PS. I think if they enable that option, then this Image Capture software will be plenty suficient to use.
No one likes change...but sometimes it works out ot be better.
Oh yea, and it does seem to process, preview and scan much quicker than the old Epson Scan software...
Jeremy

How to permanently delete Google Maps app with its data?

I want to remove my previous logins from the Google Maps app. I tried deleting it and then re-downloading it from the app store but the app shows with the iCloud logo and when I download it to my iPhone, it still shows my previous logins. There must be some way to permanently delete it?

There's no logout button. One can choose "Use Google Maps without a Google account" but not the logout:
https://support.google.com/gmm/answer/2803351?hl=en
But it still remembers my account whatever I choose.
The reason I'm thinking that the logins are stored on the phone is because I just restored my data to a brand new iPhone and Google Maps app did not have any of my login data. It has it now only after I logged in with the wrong account (by mistake.)

Sync apps with its progress, sincronizar aplicaciones con el progreso que tenia

Compre un Ipod touch y quiero tener el mismo progreso en las aplicaciones que tenia en el Ipod Touch viejo, como le hago?
I just bought an ipod touch, i want to have the same progress in the apps a had in my old ipod, what can i do?

disculpen yo tengo un problema en mi lenovo e40 ya no me aparece el icono del market y no encuentro como instalar nuevamente esta aplicacion me podrian decir donde puedo encontrar el archivo de instalacion

Epson Stylus CX6600 scanner problem with 10.6

I've read various posts about scanner functions not working after upgrading to 10.6.x. I too have this problem now with my Epson Stylus CX6600. This machine has been a real workhorse for me for 6 years and up until this week it has been trouble-free. It prints absolutely fine as usual but the new OS can't 'find' its scan function.
So far I've :
1 Deleted the driver and reinstalled via Software Update
2 System Prefs : Printer/Fax : when I select 'Scan' the queue window opens and reads "No Scanner Selected"
3 Image Capture : "No Scanner or camera selected"
4 Preview : "Epson Stylus CX6600 was disconnected"
No matter what I try my iMac will not recognise the fact that I have a scan option.
I know others have had this problem in the past but the posts remain "unanswered". My assumption is they either fixed it or gave up.
If anyone has the answer, I'd be most appreciative to hear it!
TIA
Joolster
PS : Our MacBook is connected to an Epson Stylus SX215 multifunction - print & scan working perfectly fine on that.
Message was edited by: The Joolster

(1) Happily, you can get the 4.1.0 file from the 10.5.8 Combo Update. (I don't know which of the previous updates introduced it — to save time, I looked only in this combo update, the last for Leopard.) Download the standalone installer from the Apple site.
(2) You must also have a file called "EPSON Stylus CX6600.ds", which belongs in "/Library/Image Capture/TWAIN Data Sources/". If it's not there, you can get it from Epson:
(a) Download the file for the CX6600 identified as "TWAIN Driver and EPSON Scan Utility v2.77A", with the filename "epson11802.dmg". It's described at the model's downloads page, and the direct link is "ftp://ftp.epson.com/drivers/epson11802.dmg".
(b) Epson seems to have messed up the content type of the file, or made some other error, because Safari at first tries to open it in the browser as though it's a movie. Give it a minute or two to sort itself out. If it never starts downloading, use an FTP program to get the file.
(c) Once you have it, mount it and run Epson Scan Installer.
(3) Next, go into "/Library/Image Capture/Devices/" and trash the file "Epson Scanner". (Well, you might want to just stash it somewhere else, in case you ever need to use an up-to-date Epson scanner.)
(4) Download a program called Pacifist, if you don't already have it. You will use it to extract from the 10.5.8 Combo Updater only the file that you need.
(5) Open the combo updater in Pacifist, and look for a file called "EPSON Scanner.app". Its location in the combo updater package is "/Library/Image Capture/Devices". Select this file and click the "Install" button in the toolbar.
(6) "EPSON Scanner.app" should now be in your Devices folder. Double-click on it to launch it. (It runs in the background, so you won't see an icon in the dock, but you .)
(7) At this point, you should be able to power up and connect your CX6600, launch Image Capture, and scan as usual. (The EPSON Scan application, which will have been installed in your Applications folder during step 2, if it was not already there, should also function.)

Mobile Recovery App DROID X Unrecognized Device

Here we go again.
Asurion released their Mobile Recovery app with Android 2.1. The software permitted users to find their phones from Asurion's web page or even file a claim against loss. However, when MotoRizon updated the DX to Froyo, the program failed to recognize the device. MotoRizon/Asurion left its mobile app users in the lurch for several weeks until Asurion finally made the Froyo DX "recognizable" to their software.
We have the same situation now. The company contracted under Verizon to insure your phone sends out the same "device unrecognized" message when you try to open the app under GB.
I haven't tried to call Verizon on this issue; I don't have 3 hours to waste on the phone. Last time I talked to them about my community forum account here, they couldn't figure out which department handles the web operations. I can only imagine the runaround buck pass I'll get about Asurion.
It would seem that Verizon bears some responsibility for this situation. Asurion insures Verizon's devices, and Verizon offers the software as a service. So wouldn't it make sence to communicate with Asurion ahead of the rollouts to make sure their devices will work under the new OS? And why does Asurion demand "recognition" from the device itself? Isn't the fact I have paid insurance on my phone enough? My device has to prove its provenance, too? **bleep**?
Just a thought.
I decided to buy into SeekDroid to lock/wipe/locate/recover my phone. It cost a little more, but they cover any phone, not just recognized devices.
Mike
Once more into the breach

I understand why this issue would be frustrating, and want to provide you some information to assist you. I don't want you to feel like you are getting the runaround. Mobile Recovery is made by Asurion's engineering department. We try to partner with our vendors and providers to resolve issues that arise with updates. I will submit this to our product team to see what we can do to help resolve this issue. I would recommend also posting this to the Mobile Recovery support forum.
http://help.mymobilerecovery.com/mymr/topics/unrecognized_device_please_try_again_later_message

Publishing an acquired app under its "original" name/id?

Hello everyone,
I'd like to discuss a question that came up in my mind and that I couldn't find an answer on the inet.
Let's say company B has published a good running iOS app, that company A acquires from B. Company A is interested in keeping the app in the app store under its original name. Only the "Seller" name should be updated from 'Comp. B' to its new owner 'Comp. A'. Can company A resign the app with its own developer certificate and distribute it in the appstore? Will users, who already have purchased the app from company B, get future updates for free or will they have to repurchase the app again? The later will mean that company A will loose the current user base!
Any ideas on this matter?
Thanks, Resa

No, not in that example.

I have a production mobile Flex app that uses RemoteObject calls for all data access, and it's working well, except for a new remote call I just added that only fails when running with a release build. The same call works fine when running on the device

I have a production mobile Flex app that uses RemoteObject calls for all data access, and it's working well, except for a new remote call I just added that only fails when running with a release build. The same call works fine when running on the device (iPhone) using debug build. When running with a release build, the result handler is never called (nor is the fault handler called). Viewing the BlazeDS logs in debug mode, the call is received and send back with data. I've narrowed it down to what seems to be a data size issue.
I have targeted one specific data call that returns in the String value a string length of 44kb, which fails in the release build (result or fault handler never called), but the result handler is called as expected in debug build. When I do not populate the String value (in server side Java code) on the object (just set it empty string), the result handler is then called, and the object is returned (release build).
The custom object being returned in the call is a very a simple object, with getters/setters for simple types boolean, int, String, and one org.23c.dom.Document type. This same object type is used on other other RemoteObject calls (different data) and works fine (release and debug builds). I originally was returning as a Document, but, just to make sure this wasn't the problem, changed the value to be returned to a String, just to rule out XML/Dom issues in serialization.
I don't understand 1) why the release build vs. debug build behavior is different for a RemoteObject call, 2) why the calls work in debug build when sending over a somewhat large (but, not unreasonable) amount of data in a String object, but not in release build.
I have't tried to find out exactly where the failure point in size is, but, not sure that's even relevant, since 44kb isn't an unreasonable size to expect.
By turning on the Debug mode in BlazeDS, I can see the object and it's attributes being serialized and everything looks good there. The calls are received and processed appropriately in BlazeDS for both debug and release build testing.
Anyone have an idea on other things to try to debug/resolve this?
Platform testing is BlazeDS 4, Flashbuilder 4.7, Websphere 8 server, iPhone (iOS 7.1.2). Tried using multiple Flex SDK's 4.12 to the latest 4.13, with no change in behavior.
Thanks!

After a week's worth of debugging, I found the issue.
The Java type returned from the call was defined as ArrayList. Changing it to List resolved the problem.
I'm not sure why ArrayList isn't a valid return type, I've been looking at the Adobe docs, and still can't see why this isn't valid. And, why it works in Debug mode and not in Release build is even stranger. Maybe someone can shed some light on the logic here to me.

How to build database driven mobile apps with dreamweaver and phonegap?

Hi all,
I'm searching the easiest way to implement a simple database in my app.
I can build application with php/mysql in seconds with dreamweaver.
But how can I do something similar with dreamweaver cs5.5 and phonegap for mobile apps?
I would like to create a little app that pulls data from a mysql database on my webserver.
But it seems that dreamweaver/phonegap/jquery mobile work only with HTML files.
I searched the whole web for a day now but I haven't found anything easy to recreate.
Is there a tutorial that explains the basic of database for mobile in dreamweaver?
It seems a bit limitating to use dreamweaver to build only static/useless apps....
What about forms and data validation?
TIA for any help.
tony

@idesdema: Have a look at this tutorial: http://www.codeforest.net/jquery-mobile-advanced-tutorial-rss-reader-app
It includes a demo as well as a download link to the source files.
Also, if you want to take it a step further, you can create & manage a 'local database' without having to access anything remotely - basically handling everything at the client's end.
There's a tutorial for that here: http://the-jquerymobile-tutorial.org/jquery-mobile-tutorial-CH22.php
Good luck.

INTEGRATION OF ORACLE APPS WITH MOBILE SMS

{color:#3366ff}Dear All,
I would like to Integrate the Oracle Apps with Mobile SMS,
The Task is that..
" WHENEVER THE PURCHASE ORDER IS RELEASED BY A SENIOR PURCHASE MANAGER, THEN A SMS MESSAGE HAS TO COME TO HIS SENIOR MANAGERS MOBILE Phone "
Is it Possible to Integrate Oracle Apps with Mobile Phone if it is possible then send me the DEMO Application procedure.....................
Please help me out..
Regards,
Vijay .
{color}

Sending an SMS is a relatively small customisation if you work with an SMS aggregator such as Clickatel or TXTLocal. Both expose simple Web Service api's that you call with the phone number and message text as parameters. The aggregator then hands the message off to the mobile phone network for delivery to a users phone. The aggregators also provide web services that allow you to be notified when they receive an SMS message for you. So if you wanted to be really smart you could allow the user to reply to the original SMS with "Approve" or "Reject" and update the status of the PO/requisition automatically and advance the workflow.
Edited by: mzjarvis on 19-Nov-2008 15:36

Mobile apps with phonegap + mysql ?

Hi,
i was searching for a long time but didn't find answers. is it possible to show database-driven content within mobile apps made with dreamweaver cs6 ?
If so, are there any examples or tutorials on the adobesite or elsewhere?
Looking forward for any answer :-)

PhoneGap builds mobile apps with HTML, CSS, and JavaScript. You cannot use a server-side language, such as PHP, with PhoneGap.
Presumably, you want to connect with a MySQL database on a remote server. To do so, you would need to use Ajax to send and receive data from the MySQL database. You can use jQuery to send and receive data as JSON. PHP has JSON functions that decode and encode data as JSON strings.
How difficult or easy you would find setting this up depends on your knowledge of jQuery and PHP. I don't know of any tutorials that show how to pull everything together for PhoneGap, but it shouldn't be too difficult to find tutorials for using jQuery Ajax to communicate with MySQL.

When executing an external app, how do I keep stdout with its child process

I running an external application from java, but I want the stdout to remain with the child process. This app spawns its own output window where it displays its own output and error messages. I'm running the app using the following code:
Process p = Runtime.getRuntime().exec(command, null, workingDirectory);
But the Process class grabs the stdout and stderr of the application it runs and holds on to them.
Any suggestions on how can I still run the program without Java grabbing the application's stdout and stderr streams?

In Windows, this works for me.
I don't remember why it is so convoluted, but this is what I came up with:
// Closes after completion
Runtime.getRuntime().exec(
new String[] { "cmd", "/C", "start", "/WAIT", "cmd", "/C", command } ).waitFor();
// Waits for you to close the command prompt window
Runtime.getRuntime().exec(
new String[] { "cmd", "/C", "start", "/WAIT", "cmd", "/K", command } ).waitFor();where command can be any internal command, executable, batch file.
Edited by: baftos on Feb 2, 2009 4:31 PM

Im using an ipad mini and recently it started to act way wiered than i ever imagined.whenever i switch it on it would open or close apps of its choice and function without my interference.it's like auto touch.what should i do with this?

im using an ipad mini and recently it started to act way wiered than i ever imagined.whenever i switch it on it would open or close apps of its choice and function without my interference.it's like auto touch.what should i do with this?

That could be a hardware problem with the screen digitizer but first try these troubleshooting steps in this order:
Reset: Press the Home and On/Off buttons at the same time and hold them until the Apple logo appears (about 10-15 seconds). No data will be lost.
Restore: Connect your device to iTunes on your computer, backup, and then select Restore to Factory.
See here for more details on restore: https://support.apple.com/en-us/HT201252
If none of these work your device may have developed a hardware problem. Contact Apple Support: http://www.apple.com/contact/

Mobile Scanner Apps with ITS

Similar Messages

Maybe you are looking for