Mobile web not working

At eight this morning I tried to use my mobile web to check my email but after waiting quite a while for it to load a message popped up telling me to call *611 for wireless service. I did this and was told that mobile web was down and they didn't know when it would be back up. Well I tried again about half an hour ago and still no mobile web. Is anyone else having this problem? It is becoming very frustrating. I have a Samsung Alias if that makes any difference.

I too have not been able to use mobile web all day today. I tried earlier and ended up calling customer service. They said the network was down so then I have tried since and I am still not able to. Just getting a white screen and then a few minutes later I get the message about calling *611. I hope it is back up and running soon. I use this feature on my phone multiple times a day!

Similar Messages

My T-Mobile Mobile Web not working on MacBookPro

Yodels.
I have a new T-Mobile Rocket 3.0 4G webstick and it will not work on my 13" MacBookPro running Snow Leopard 10.6.8
When I start the software up, it seems to stall, run, stall, run, and then I have to force quit. When I go to Preferences, it says it's connected to the interent with an IPv4 address using DCHP. However, using any browser, I get a error message stating server not found.
Talked with t-mo and they say it's a compatibility issue with my OS and that I need to take it to the Apple store to fix the problem. They say this as I am connected with the internet and they've pinged my computer. I get text messages, but that may just be using the carrie signal, not the 4G.
I am wondering if anyone here has actually had the issue and what were the fixes.
Notes:
All my software is up to date:
     The T-Mobile WebConnect
     Firmware in the Rocket 3.0 4G updated
     Mac OSX fully updated including Java
Turned off Firewall, including "Stealth Mode," to see if that was issue.
Have 4G with 4 bars of signal
No other apps but the Webconnect and Firefox
Thanks in advance for the help.

Hi Jesusv87,
Thanks for using Apple Support Communities. This article has some steps you can take for issues sending and receiving MMS messages:
iOS: Troubleshooting Messages
http://support.apple.com/kb/ts2755
If you still can't send or receive MMS messages
To send and receive MMS messages on your iPhone, verify that your wireless carrier supports MMS2.
Ensure that MMS Messaging is turned on in Settings > Messages.
Verify that your phone is able to access cellular data.
Some carriers allow you to edit your APN (Access Point Name), which may prevent MMS from working.
If you are roaming outside your calling area, make sure you have Data Roaming turned on in Settings > General > Cellular to send or receive MMS content.
While on a phone call, you will be unable to send or receive MMS messages when using an EDGE, GPRS, or any CDMA cellular data network. After the phone call ends, you will receive any incoming messages. If you tried to send an MMS message, you may need to send it again.
If the issue persists and your wireless carrier has confirmed that your wireless account is provisioned2 for MMS, restore the iPhone.
If this doesn't help, please reply with any steps you are unable to complete and any additional information such as exact error messages or strange behavior.
Cheers,
- Ari

Save for web not working in Photoshop element 6

Save for web not working in Photoshop element 6. I am using Mac os x version 10.5.8 Anyone know how to fix that please tell me. Thanks

I just copy the preferences from my computer for you to see what are shown about adobe
file:///Users/raymondsmith/Library/Preferences/Adobe/
file:///Users/raymondsmith/Library/Preferences/Adobe%20Illustrator%20CS2%20Settings/
file:///Users/raymondsmith/Library/Preferences/Adobe%20Photoshop%20CS2%20Paths
file:///Users/raymondsmith/Library/Preferences/Adobe%20Photoshop%20CS2%20Settings/
file:///Users/raymondsmith/Library/Preferences/Adobe%20Photoshop%20Elements%206%20Paths
file:///Users/raymondsmith/Library/Preferences/Adobe%20Photoshop%20Elements%206%20Settings /
file:///Users/raymondsmith/Library/Preferences/AdobeUM/
file:///Users/raymondsmith/Library/Preferences/AppleWorks/
file:///Users/raymondsmith/Library/Preferences/ByHost/
file:///Users/raymondsmith/Library/Preferences/CD%20Info.cidb
file:///Users/raymondsmith/Library/Preferences/CDDB%20Preferences
file:///Users/raymondsmith/Library/Preferences/cfx%23FBSxPfw
file:///Users/raymondsmith/Library/Preferences/com.adobe.acrobat.90.sh.plist
file:///Users/raymondsmith/Library/Preferences/com.adobe.Acrobat.Pro7.0.plist
file:///Users/raymondsmith/Library/Preferences/com.adobe.acrobat.sh.plist
file:///Users/raymondsmith/Library/Preferences/com.adobe.Acrobat.Uninstaller.plist
file:///Users/raymondsmith/Library/Preferences/com.adobe.Adobe%20Help%20Viewer.plist
file:///Users/raymondsmith/Library/Preferences/com.adobe.ami.installer.plist
file:///Users/raymondsmith/Library/Preferences/com.adobe.bridge2.plist
file:///Users/raymondsmith/Library/Preferences/com.adobe.mediabrowser.plist
file:///Users/raymondsmith/Library/Preferences/com.adobe.PhotoshopElements.plist
file:///Users/raymondsmith/Library/Preferences/com.adobe.Reader_ppc_9.0.plist
file:///Users/raymondsmith/Library/Preferences/com.adobe.Reader.plist
file:///Users/raymondsmith/Library/Preferences/com.aol.aim.plist

Eagle eyes web not working iOS 6

i updated my iphone 3g to ios 6, i have a problem because eagle eyes web not working, appear message that push video is not compatible

I would do as what Diavovex suggested:
Settings >>> General >>> Reset >>> Reset all Settings.
Once you have completed this, ipad will reboot, connect again to your Wi-Fi and then try to Reset imessage again. Just make sure your Apple ID and password are ok ...... try log in to Apple Store and if this is not an issue then I don't see why imessage cannot connect?
Azim

I got an IPAD 4 from one my friend which is lost mode, tried reaching owner on his mobile, which not working, anyway to reach the owner of IPAD?

I got an IPAD 4 from one my friend which is lost mode, tried reaching owner on his mobile, which not working, anyway to reach the owner of IPAD?

I"m afraid not. The iPad will be displaying only part of the ID, and Apple will not help you to find the owner's address (privacy laws). Without being able to reach the previous owner you will not be able to use the iPad.

BIP Report in Siebel mobile is not working in languages other than English

Hi,
We have upgraded our Siebel from 7.8 to Siebel 8.1 and in that we have moved from Actuate to BIP Reports. We have created a customized report in which we have put in the Filters on '.rtf' file to show a particular set of data. This report is deployed for 3 languages : English (ENU), Portuguese (PTB) and Spanish (ESN).After deploying this report, on Web application, it is working fine for all the languages but we are facing an issue on mobile client, the report is only working fine in ENU but for other languages(PTB & ESN) it is failing (means the filter which we put on '.rtf' is not working on other languages).
Is anybody face this issue and what will be the solution for this?

Hi
I think you need to first translate the smartform into other languages. Before translation, it wont work.
Steps for translation:
1. goto Transaction SE63
2. in R3 Enterprise select form menu
Translation - ABAP Objects - Other long texts
3. select FS - SSF-Smart Form
4. Object Name: choose your smart form
5. select target language
6. press edit
Regards,
Vishwa.

Android mobile does not work with submit fdf format

I want to gather data by mobile device (Android) as JavaScript does not work well in this environment, I intend importing the gathered data into a report PDF form with JavaScript functions etc., however the Acrobat mobile reader does not appear to work with the submit function for sending data (FDF format) by E Mail.
We are using Acrobat XI in most cases to gather this data and this works well, however we are experimenting with mobile options which are very limiting, and therefore we thought by just gathering the data on a mobile device we could import it into our working windows pdf form, our trials using this concept in a windows environment work, but we stumbled once we found that the submit button does not work in the android reader to send the FDF data.
Does anyone know of a work around?
Regards Mike

FormsCentral can be a bit confusing, so I'll try to clarify some things. It allows you to work with two completely different types of forms: web forms and PDF forms. Web forms are HTML forms and are hosted on the FormsCentral server and loaded into and submitted via the user's browser, so web forms do require internet access.
FormsCentral can also process submissions from PDF forms, and the forms can either originate from Acrobat or the FormsCentral designer, either the desktop app that comes with Acrobat 11 or the browser-based app. The FormsCentral designer allows you to create PDF forms with simple layouts, whereas Acrobat gives you much more flexibility. Designing a PDF form in FormsCentral can be helpful if you want to be able to use the same form for both a web form and a PDF form, allowing to to take advantage of each type at the same time, but you are not limited to PDF forms that are created by the FormsCentral designer.
Regardless of how the PDF was created, it can be set up to submit the form data to the FormsCentral server, which is done using the same format as a web form. It is done securely using HTTPS. There are certain features that are supported with PDF forms that aren't supported by FormsCentral, but this is usually not a problem. The most significant limitation is the 500 field limitation, so some larger forms aren't possible.
Once you have a PDF form created in Acrobat, you simply import it into FormsCentral and it gets uploaded to the FormsCentral server, where it is Reader-enabled, a submit button is automatically added, and is then downloaded so you can distribute it by placing it on your web site, sending by email, etc. So unlike web forms, FormsCentral does not host them for you.
It is possible to use Acrobat to modify the PDF that you download, first by selecting in Acrobat "File > Save a Copy", opening the copy, and making the changes. This is often done to change the submit button (size, location, other properties) of the submit button that gets added. You can then Reader-enable in Acrobat if needed and distribute the form.
Since it's a normal PDF form that is Reader-enabled, Reader users will be able to open it, fill it in, and save it at any time using Reader for Windows/Mac or Reader for Android/iOS. The latter currently only support submitting via email or to FormsCentral, as opposed to your own web server. Once the user has access to the internet, they can open the form and press the submit button. If the submit is successful, the FormsCentral server returns a response so the user gets some feedback, unlike with email "submits".
Each submission is automatically stored in the responses table, which you and team members can view at any time. An individual response can be downloaded as a filled-in PDF, or you can download the entire table and import the data into a spreadsheet for further analysis. As mentioned earlier, you can set it up so that you and others can receive an email for each submission, and it can include the form data in the body of the email if wanted.
Post again if you have any questions, or go to the FormsCentral forum here. The forum is generally very good, but sometimes questions about PDF forms are not answered entirely accurately, so it's sometime helpful to post here too.

Rogers 920 on T-Mobile Tethering Not Working

Hello,
I bought an unlocked Rogers CA Nokia 920.3 device with pentaband support for use on the T-Mobile network. I entered the APN settings for MMS and internet manually and everything works fine except the internet sharing only works some of the time and other times I get the error "There's no cellular data connection to share right now" even if there is cellular availability. The internet on the phone is fully functional, just not the sharing. I have an unlimited plan with tethering on T-Mobile and should not be having this problem.
I have so far tried the spanish keyboard trick and the foreign SIM configuration trick and they work some of the time but only temporarily. I have tried installing access point which ends up taking me to T-Mobiles website to add tethering (even though I already have it), so that does not work.
Long story short, the access point application does not set up the phone for proper tethering on T-Mobile and the stock unlocked Rogers ROM does not work consistently. AP needs to be updated and fixed or some other setting somewhere else in the phone is awry. Is there another ROM I can use and keep pentaband support with tethering? Please advise.
Thank you,
Chris
Lumia Black
OS: 8.0.10517.150
Firmware: 3051.40000.1347.1001
Hardware: 6.0.0.1
Radio Software: 1.0.202158.3
Chip SOC: 8960

Bump, bump, bump. Add unlocked 1020 and retail Lumia 1020 (from a Microsoft Store) to this list. This is definitely a T-Mobile problem, but someone from Microsoft/Nokia needs to make them fix it.

HT204023 hi there can any one help me i have a iphone 5 but my mobile internet not working but i can connect to my wifi no bother

hi there can any one help me i have a iphone 5 but my mobile data is not working but a can connect to my wifi no bother

talk to your carrier about the data subscription and possible settings changes to their apn than

Share Web Not working

I click the start button, becomes gray and says startig web sharing but it never starts. What can be wrong? If I close the control panel and open it again, it remains off.
Thanks for your suggestions.

Hi: This is the message I've got after restarting
/usr/sbin/apachectl restart: httpd not running, trying to start
Processing config directory: /private/etc/httpd/users/*.conf
Processing config file: /private/etc/httpd/users/+entropy-php.conf
fopen: No such file or directory
httpd: could not open document config file /private/etc/httpd/users/+entropy-php.conf
/usr/sbin/apachectl restart: httpd could not be started
The other question: I've never use it before. I was trying to test a PHP script locally and it did not work (first time I was trying to do so). Then I found out that I had to start the apache services and used this app (http://www.entropy.ch/software/macosx/php/) with not results. Then I tried to go back and I've deleted the folder they ask if I want to get rid of it but I could not delete the +entropy-php.conf file.
Diego

Mobile Hotspot not working after upgrading to 4.4.2

My husband and I have identical Motorola phones. He let his upgrade to Android 4.4.2 over a month ago. Since then, his Mobile Hotspot cannot be used to connect to our home PC. If you use your mobile hotspot, DO NOT LET IT UPGRADE!!!!!!!!
Three visits to local Verizon store, more than 50 power-off's (many of them soft boots), a long phone call to Verizon support. Still not working. Except once two weeks ago for several hours, then failed again. About a week ago,our HP laptop started connecting to the Hotspot, but the desktop cannot. My hotspot (which is fortunately still running 4.1.2) provides internet access just fine. Strange new symptom last week: once the laptop has connected to the 4.4.2 Hotspot, the desktop can as well. Sigh. Verizon offered to replace his phone under warranty, but the new one is expected to arrive with the latest version. I am not optimistic about that. Others must be having the same problem. Perhaps not as desperate as us because it is our only internet service at our rural home. We are still paying full price for our plan, but do not have the service. And, we have spent literally a hundred hours trying to debug this. Come on, Verizon, this needs to be fixed!

RAZR M
Just tried another soft boot. Same behavior.
Thank you for responding.
Sent from my Verizon Wireless 4G LTE DROID

Unlocked iPhone from T-Mobile does not work in Switzerland

I'm extremely annoyed. I bought myself a *so called unlocked* iPhone in Germany for 999 Euro and now it does not work with a Swiss SIM card. When I try to make calls via dialing or when i try to read text messages (sms) the phone and the sms application will crash. Calling the different helplines ends up in the same resutls: Apple care blames either Swisscom or T-Mobile, T-Mobile blames either Swisscom or Apple and Swisscom blames Apple or T-Mobile...
In the end however, I can't get rid of the feeling that the problem could be solved by a very simple software update, because I've seen hacker reports on the internet claiming they were able to solve the problem by changing a few settings. I don't want to be forced to hack my legally bought so called unlocked iPhone. *When will Apple set the "unlocked" iPhone really free?*

Hi Pete,
welcome to the club! A you can see from this thread
http://discussions.apple.com/thread.jspa?threadID=1260589&tstart=0
you are not the only one. It seems as if the T-Mobile unlocked phones work with any German SIM card, but with non from not-Apple supported countries (like CH).
Apple support is aware of the problem, as many of us have called them and submitted bug reports, but it remains to be seen, if Apple is interested enough in "us" to provide a solution.

Quickcam Web not working

Hello together!
Since qc-usb was replaced with gspca I have troubles with my Webcam. It's a Quickcam Web (more precisely: LEGO cam) 046d:0850 and it used to work with qc-usb. It's also listed as a supported one in the gspca files.
It is correctly recognized when plugged in:
usb 2-1: new full speed USB device using ohci_hcd and address 3
usb 2-1: configuration #1 chosen from 1 choice
Linux video capture interface: v2.00
gspca: main v2.7.0 registered
STV06xx: Probing for a stv06xx device
gspca: probing 046d:0850
STV06xx: Configuring camera
STV06xx: vv6410 sensor detected
STV06xx: Initializing camera
gspca: probe ok
STV06xx: Probing for a stv06xx device
gspca: probing 046d:0850
STV06xx: Probing for a stv06xx device
gspca: probing 046d:0850
usbcore: registered new interface driver STV06xx
STV06xx: registered
usbcore: registered new interface driver snd-usb-audio
When I try to cat from the video device I get this:
cat: /dev/video: Input/output error
dmesg now reports:
gspca: usb_submit_urb alt 1 err -28
gspca: no transfer endpoint found
Other applications (mplayer, amsn, etc.) behave similar.
My first tests on a 2.6.29 kernel months ago resulted in a Kernel Panic, with 2.6.32 it's not working "only"...
Regards,
Sven

Thank you very much. Your link (and another google search which taught me about guvcview) helped me.
After I unplugged my USB keyboard and mouse (two different devices) from my computer (no hub!) the cam started to work (note: I'm using a laptop). I'm very surprised by this behavior.
Now I need to find a solution for this bandwidth problem, because without full keyboard and mouse chatting is not very comfortable (and that's the sole purpose of this cam)
EDIT: Well... unplugging one of the two devices (keyboard, mouse) seems to be sufficient... perhaps I should learn to live without a real mouse (that's easier than without a real keyboard)
Regards,
Sven
Last edited by PascalDragon (2009-12-31 17:18:02)

I tested Adobe CC then bought an educational license with another ID. Lightroom Mobile does not work anymore.

I tested Adobe CC then bought an educational license with another ID. I cannot use Lightroom Mobile. Message "Evaluation version has expired is displayed" and information in Preferences showing the old ID, not the new one. Disappointing support from Adobe. How to get rid of the old information and solve the problem?

Thanks but it did not work. Adobe (USA, not France) solved the problem. My subscription was not correctly entered in the database, it seems.

Photoshop CS6 Save for Web not working

I am using photoshop CS6 (cloud) on Mac (10.7.5) and when I use the Save For Web > save, i got the following popup :
---- Adobe Save For Web Error ----
Could not complete this operation. An unknown operating system error has occurred.
I have been using CS6 for months and it worked fine yesterday before shutting done. Today morning at startup it was not working anymore.
I have tried to uninstalled and reinstalled photoshop, clear my presets, shut down/started up, repair disk, repair permissions,... without succes.
The save for web function still works in CS5.
Any help will be very much appreciated,
Raphaël K.

I found the solution (took forever to consolidate all the answers) for OS X 10.9 + Maverick. Finally!
1. Change permissions (as AOTPR says) to your User/Library/Preferences file so that your admin and user (the one you are using) has read + write permissions within the Get Info pane (command+I). You may have to add them with the sign.
2. Delete Adobe save for web 12.0 Prefs & Adobe save for web 13.0 Prefs files within the User/ Library/ Preferences folder. These may be hidden for some people, so when in a finder window, hold Option(alt) and click Go from the main top menu (keep holding Option/Alt) and click Library — the full Preferences folder should open for you.
3. Change the view when in Save for web pane in PS. If you have it in Cover Flow — it won't work. Change it to another view like List or Columns view.
Presto! Works for me on Maverick.
Thank god. It took forever to get this cleared up!!
If you have any questions, email me [email protected]

Mobile web not working

Similar Messages

Maybe you are looking for